Httpswwwfreelancerinprojectsautocad cad camsteel structural detailer jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    39,647 httpswwwfreelancerinprojectsautocad cad camsteel structural detailer jobs found, pricing in USD

    footprints and symbols and pub layout work using KiCAD

    $31 / hr (Avg Bid)
    $31 / hr Avg Bid
    7 bids

    Hello - I want to send you my cad files for review and discussion and then for you to provide 3D rendering.

    $18 / hr (Avg Bid)
    $18 / hr Avg Bid
    1 bids

    Attaching here with Plot sketch, I want built a showr...First floor. Ground floor needs Shops, Parking area and road to plot B First floor, need to use full space, Washroom/toilet facility, Want use for a furniture showroom Need Structural plan and Elevation My house is located in Plot “B”, Car entrance to the plot B is only through Plot “A”

    $137 (Avg Bid)
    $137 Avg Bid
    15 bids
    Steel Project Drawings 6 days left
    VERIFIED

    I have ...that model. I attached an image of the Robot model and some example images of what the drawings must be like. I need 8 sheets (implantation, cover plan, structural cut 1, structural cut 2, structural cut 3, detail of the walkway, plan of the walkway, walkway cut, 3d view and connections. The drawings must be done with advance steel or tekla.

    $146 (Avg Bid)
    $146 Avg Bid
    17 bids

    Structural calculations and drawings required for a three storey building development.

    $1176 (Avg Bid)
    $1176 Avg Bid
    26 bids

    Cracks have appeared on a wall as some bigger than 10mm and the wall surfaces differentiate. Apparently, there is a movement/settlement. I need a structural engineer/ surveyor to give a qualified opinion and to plan eventual works in order to strengthen the walls Walls are internal in a house more than 60-70 years old, however, the cracks appeared in

    $1029 (Avg Bid)
    $1029 Avg Bid
    10 bids

    We are a car company ( bespoke 1930 style cars) and we need a CAD expert for the onward improvement to the vehicle parts. This could be partly based on site ( Stone in Staffordshire) or done completely remotely. Ideally, we would like to work with a CAD designer with experience in the car industry or a passion for cars. Experience with Solidworks would

    $15 / hr (Avg Bid)
    $15 / hr Avg Bid
    35 bids

    I need a designer who can design a customised miniature figurine CAD model with the photos that I've given and provide me with the stl or obj etc...files

    $31 (Avg Bid)
    $31 Avg Bid
    15 bids

    I need a designer who can design a customised miniature figurine CAD model with the photos that I've given and provide me with the stl or obj etc...files

    $19 (Avg Bid)
    $19 Avg Bid
    4 bids

    ...Skills. 1) Grahic Design 2) Web Design 3) VBA 4) PHP 5) Javascript and Jquery 6) Software Architecture 7) Transalation 8) Academic Writing, Technical Writing and Blogging 9) Auto CAD 10) Accounting 11) Language Tanslators (French, Spanish, Sweden, [login to view URL], Dutch,German, Indonesian, Italian,Norwegian,Turkish) 12) C Programming and C++ Programming

    $101 (Avg Bid)
    $101 Avg Bid
    24 bids

    Looking for expert and native English speakers who can write super quality content for website and regular article and blog post. Writer must have previous experience in web & article writing. No non native English speakers are not allow to place bid on this project. Many thanks.

    $16 (Avg Bid)
    $16 Avg Bid
    11 bids
    To design a 3D CAD file 6 days left
    VERIFIED

    The design is already built in solid works, you just need to make some changes in it. Please look to the uploaded file

    $17 (Avg Bid)
    $17 Avg Bid
    43 bids
    automobile designs 6 days left
    VERIFIED

    i have developed new ideas and concepts for automobile industry. am looking for a person who can convert my ideas to CAD and can design.

    $1566 (Avg Bid)
    Local
    $1566 Avg Bid
    11 bids

    5-7 pages need to start now budget 75$ cad pls do not waste my time if you aren't available now and willing to work on this budget and if you are not good with shopify

    $72 (Avg Bid)
    $72 Avg Bid
    17 bids

    Hi, Are you able to do any drafting for me?

    $13 / hr (Avg Bid)
    $13 / hr Avg Bid
    1 bids

    I am working on a prosthetic limb which is to be modelled using any 3d CAD software.

    $15 (Avg Bid)
    $15 Avg Bid
    3 bids

    Hi my name is Malikah. I'm in the product development industry and I need help with creating CAD files which can be used for 3D printing.

    $386 (Avg Bid)
    $386 Avg Bid
    66 bids
    BUILD WEBSITE VIA SHOPIFY 6 days left
    VERIFIED

    5-7 pages need to start now budget 70$ cad pls do not waste my time if you aren't available now and willing to work on this budget

    $89 (Avg Bid)
    $89 Avg Bid
    18 bids

    Need someone who is available to develop a site 5-8 pages I have all content and will be working closely with the hired person O...develop a site 5-8 pages I have all content and will be working closely with the hired person Only apply if you can start now as this is a time sensitive project. Budget 70$ CAD pls apply with references of your work

    $95 (Avg Bid)
    $95 Avg Bid
    45 bids

    We are a Kitchen Cabinet manufacturer and are in need of assistance of updating several hundred CAD files of cabinet components. The components are fairly simple and the updates are primarily adjusting dimensions of flat wood panels (ex. adjusting the location of holes drilled in the panel, grooves, etc.). Please see the attached PDF printouts for

    $18 / hr (Avg Bid)
    $18 / hr Avg Bid
    59 bids

    Sir myself completed my Mtech in Structural Engineering and looking for a good opportunity as a Structural Design Engineer and expertise in softwares Staad Pro, Etabs, Auto Cad, Ms Office. Please refer me and give an opportunity in your organisation or company as a Trainee or Intern to learn work. Please provide me an opportunity to build and expand

    $8 (Avg Bid)
    $8 Avg Bid
    1 bids
    Footwear CAD 5 days left
    VERIFIED

    Looking for someone to make changes to a CAD on footwear. Do have the original file so I need someone to duplicate and makes changes from scratch

    $119 (Avg Bid)
    $119 Avg Bid
    38 bids

    I am looking for high quality "realistic" modeling and rendering for our products. We will provide you with a 2D Cad file and will need you to produce 3D & apply the rendering to it . Please find attached example for the expected quality. You will make one model for each product & render it in 4 colors/texture. We will have more than 500 products

    $1633 (Avg Bid)
    Featured Urgent
    $1633 Avg Bid
    69 bids

    Part 4 The botoom disk is centerec with a radius of 40, padded to a height of 4. The central column has a radius of 8 with heaight of 60. The ribs are 45/45/90 triangles with a leg of 20. The rib is padded equally in both directions to a width of 4, part 3 Centered cube of side 60 Centered column of radius 15 and height 30 Centered hole of radius 15. Notes: The cube should be centered vert...

    $95 (Avg Bid)
    $95 Avg Bid
    35 bids

    ...a web banner designing some of the project will be in cad and require buildings with measurements etc the banner then progresses to notmal view ie RGB it will need to be done 3D there will also need to be specific buildings in the city scape a thermal building buildings with measurements maybe cad etc, a fire damaged property and a tower block. there

    $134 (Avg Bid)
    $134 Avg Bid
    10 bids

    To draft concept drawings related to equipment box, cooling plates, interface panel and etc. Detail design requirements will be provided before project award. Please see attached drawings for reference of how the box MAY look like. Please estimate your price no more than 1-2 days effort as we only want to figure out the first step of the product. Designers who has knowledge and experience in th...

    $130 (Avg Bid)
    $130 Avg Bid
    49 bids

    We require a 3D cad model to be made of our mobile flow calibration rig. We offer calibration services of flow meters from 0.5" to 3" depending on flow rate.

    $173 (Avg Bid)
    $173 Avg Bid
    24 bids

    Project and details has been negotiated with developer webmynesys. No need for additional bids.

    PHP
    $493 (Avg Bid)
    $493 Avg Bid
    23 bids

    We done massive project to our house, now is time for back garden. Our situation not easy one as house is on the hil...time for back garden. Our situation not easy one as house is on the hill to get decking done needed to go again with planning permission. Planning officer just after some structural numbers. please find Drowings attached thanks Paul

    $235 (Avg Bid)
    $235 Avg Bid
    21 bids

    I need individuals who have sold social media over the phone already You need appointment setting experience and know how to close a sale Each sale to you is $1600. Cad, You get paid the day you make the sale. We do not want people who have an accent you have to speak and write in English You are provided with the leads and the calling platform. There

    $1675 (Avg Bid)
    $1675 Avg Bid
    1 bids
    Outbound sales specialist 5 days left
    VERIFIED

    ...put, you're going to be talking to business owners, convincing them to sign a contract with us, and on the day that the client pays up, you get your cash. Base Pay of $200 CAD/Month wth 30% of sales on top of that. The payment will be made on Freelancer Site and all other details regarding the position will be forwarded to you after the application

    $124 (Avg Bid)
    $124 Avg Bid
    3 bids

    Hi Thanh Trung N., I noticed your profile and would like to offer you my project. We can discuss any details over chat. I have a 2 houses designed in CAD and need some changes made to the layout and to some windows and doors. I estimate 2 hours work (1 hour per house). I will provide all details of what is required to be done. I am willing to pay a

    $62 (Avg Bid)
    $62 Avg Bid
    1 bids

    Hi Bestudio / CAD Designer, I noticed your profile and would like to offer you my project. We can discuss any details over chat.

    $10 (Avg Bid)
    $10 Avg Bid
    1 bids
    BUILD A WEBSITE 5 days left
    VERIFIED

    5-7 pages via shopify. Looking for someone who is both good with design and coding. Price is 75$ CAD FIRM Apply with samples of your work if you are interested

    $94 (Avg Bid)
    $94 Avg Bid
    35 bids

    Hi Bestudio / CAD Designer, I noticed your profile and would like to offer you my project. We can discuss any details over chat.

    $15 / hr (Avg Bid)
    $15 / hr Avg Bid
    1 bids

    ...describe the pipe jacking sequence and methodology to prospective plant owners and contractors. Please refer to [login to view URL] for an overview of our solution. We would provide CAD drawings of the tools, and we require someone to model a pipe rack with 8 pipes on it across supports at 3 meter intervals. When we lift a pipe rack the lifting curve will go

    $517 (Avg Bid)
    $517 Avg Bid
    27 bids

    I have an existing web based project using windows hosting. that I want to include a drawing program similar to auto cad, RFMS measure, Xactimate just to name a few comparisons & for pricing reference. The current project is programmed in the following. I prefer someone or company skilled in all 3 computer languages. If cost is prohibitive, then

    $20 / hr (Avg Bid)
    $20 / hr Avg Bid
    6 bids

    Looking for a part time Mechanical CAD Designer. I need mechanical parts to be designed. I need you to be available during the day CST time in which I can discuss the details for you. I have projects or designs that need to be done on a fairly consistent basis. It's a daily/weekly thing at least 5-6/hrs per day. You should be experienced in solidworks

    $389 (Avg Bid)
    $389 Avg Bid
    86 bids
    $10 Avg Bid
    1 bids

    I'm looking for someone to complete my Projects for Auto CAD and Thermodynamics Read instructions provided Date of submission of Projects is 29th May 2019

    $158 (Avg Bid)
    $158 Avg Bid
    9 bids

    G+2 floor small residential building of area 35×22

    $106 (Avg Bid)
    $106 Avg Bid
    28 bids

    i need 3 version of ipotetical concept of inside building need only 2 d planimetri room, toylet kichen ather

    $52 (Avg Bid)
    $52 Avg Bid
    28 bids

    Looking for someone who is both good at design and coding to create a beautiful website via shopify. It wi...provide some design guidance but I am looking for someone with a good design aesthetic. This is for coworking space. Please provide samples of your work. PRICING FOR THIS IS 45$ CAD FIRM . PLS DON'T APPLY IF YOU CAN'T DO IT FOR THAT BUDGET.

    $37 (Avg Bid)
    $37 Avg Bid
    8 bids

    Looking for someone who is both good at design and coding to create a beautiful website via shopify. It wi...provide some design guidance but I am looking for someone with a good design aesthetic. This is for coworking space. Please provide samples of your work. PRICING FOR THIS IS 45$ CAD FIRM . PLS DON'T APPLY IF YOU CAN'T DO IT FOR THAT BUDGET.

    $25 (Avg Bid)
    $25 Avg Bid
    7 bids

    Seeking call centre with Bilingual agents French and English a must. Appointment setting campaign. Hourly plus commission. $4 CAD per hour plus $2 CAD per appointment booked. Average appointments booked 2 per hour. Looking to start with 2 agents. Hopefully call centre will be able to handle more agents as we grow. Home Improvement campaign. First

    $4 / hr (Avg Bid)
    $4 / hr Avg Bid
    23 bids

    Need someone who is good at coding to finalize changes on website FIRM PRICE 30 CAD for the tasks outlined below Need someone who can start now and get it done today See instructions below and only apply if you can do these ------------------------------------------------------------------------------------------ HOME PAGE [login to view URL]

    $22 (Avg Bid)
    $22 Avg Bid
    10 bids
    CAD Modelling- Home Appliance 4 days left
    VERIFIED

    8 basic CAD models required based on external dimensions & technical diagrams. No requirement for internal parts, only based on external dimensions. Expected time: 4 hours/ $30 USD per hour.

    $96 (Avg Bid)
    $96 Avg Bid
    101 bids

    MY BUDGET IS $20 CAD PLZ DONT BIT IF YOU CAN NOT DO THIS IN GIVEN BUDGET . I am looking for someone who can create 30 do follow and 70 no follow back link targeting CANADA . I am not looking for Bulk software created back links , it all needs to be WHITE HAT . You may have to do some on page and Off page seo as well . Let me know if you are interested

    $33 (Avg Bid)
    $33 Avg Bid
    27 bids

    Hello, looking for an Architect to help me with ideas, renders, drawings to remodeling a Bar / Restaurant / Brewery. We are a company based in Dallas City. I need only European or American

    $471 (Avg Bid)
    $471 Avg Bid
    31 bids