I2c lahore jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    2,291 i2c lahore jobs found, pricing in USD

    I am looking for a person who will advise, design, review and occasionally code, as part of a project I am working on. The project will be based on Arduino/PlatformIO/C++ using an RTOS (Possibly ChibiOS), Over an MCU (Possibly STM32), for an IoT/automation system. What experience and knowledge you will need: - Microcontrollers such as STM32, ESP32, ESP8266, ARM, .. - RTOS (ChibiOS, FreeRTOS, ..) ...

    $12 / hr (Avg Bid)
    $12 / hr Avg Bid
    4 bids

    need to create 3 wire pt100 sensor module with auto lead wire compensation and high immune to EMI noice

    $213 (Avg Bid)
    $213 Avg Bid
    4 bids

    Hello my fellow developers, we're looking for an experienced Embedded Software Engineer with experience in taking projects from ideation through to production! We’re developing a GPS Tracker Product so it would be great to have experience in developing such applications that use GPS/GNSS/Cellular/Bluetooth/Wifi. If you don’t have experience, it’s ok let's chat about ...

    $1635 (Avg Bid)
    $1635 Avg Bid
    16 bids

    i need a bit-banging firmware or at least the registers values for the LIS2DW12 on the ATTINY20, basically to detect freefall or sudden movements

    $185 (Avg Bid)
    $185 Avg Bid
    8 bids

    Hi Cong D., Can you do design, schematic, PCBA and testing? That is full turnkey project. This is a prototype so you will have the boards built, write the software and test that it all works. Simple project to keep a counter for each of the quardrature optical encoders and provide the counter information over I2c to I2C master when requested. More to discuss if you think you can do this.

    $100 (Avg Bid)
    $100 Avg Bid
    1 bids

    A FUZZY LOGIC BASED PID SELF-TUNING CONTROLLER BASED ON ESP 32 , THINGS TO INTIGRATE ESP32 ROTARY ENCODER WITH PUSH BUTTON 8 BUTTONS I2C -20*4 LCD DISPLAY 4-20 MA LOOP TRANSMETER MODULE WITH I2C COMMUNICATION TEMPERATURE SENSOR

    $110 (Avg Bid)
    $110 Avg Bid
    3 bids

    We are in need of hiring firmware expert who has 5+ years of experience in ESP32 firmware programming. The peripheral components and functions are listed in the below - Step motor drive(A4988) - Server motor drive([login to view URL]) - RFID tag read(MFRC522 module) - Scale using Load cell(HX711) - LED stripe PWM dimming control(5V monochrome LED stripe) - Nextion display Interface(4.3" NX322...

    $19 / hr (Avg Bid)
    $19 / hr Avg Bid
    19 bids

    The new project with BLE is following: STM8L152R8 (Port PC0 and PC1) connected to LBCA2HNZYZ (based DA14580, port P04 and P05) communication protocol is I2C. 1. uC send message to BLE , in a polling mode and should retrieve data back after 20-30 sec. 2. BLE will forward the message to mobile device 3. Mobile device will send feedback . 4. BLE will forward the feedback message to uC. I have c# app...

    $357 (Avg Bid)
    $357 Avg Bid
    7 bids

    I need a basic function setting of the stm32f407 discovery board based on the EWARM program. 1. USB dfu mode setting and simple testing 2. 8 channels for servo motor(PWM) setting and simple testing 3. 3 channels for fan(PWM) setting and simple testing 4. 8 channels of interrupt setting and simple testing 5. 1 USART(Rx,tx) setting and simple testing 6. i2c for eeprome setting and fuctions and simpl...

    $155 (Avg Bid)
    $155 Avg Bid
    3 bids

    Need define I2C definition and also basic send receive command for STM8L152R8. Need to use standard I2C1 port according to datasheet I have NUCLEO-8L152R8 for debugging. the developing environment is IAR. Need to tests the code , I can provide TeamViewer connection. This job should be done in 2 days.

    $154 (Avg Bid)
    $154 Avg Bid
    5 bids

    We are developer medical devices, need urgently expert hardware developer with over 10yearsof experience in designing & developing BLE based Nordic microcontroller with RS485, I2C , USB ports and BLE communication interface meeting all the CE guidelines. Device has hardware & display screen design with Firmware programming requirement. Only qualified & confident engineers shall apply.

    $388 (Avg Bid)
    $388 Avg Bid
    9 bids

    Circuit designed and built using Arduino NANO and i2C LCD. Code 90% written. Requires tuning of ADC incputs to show greater resolution. Also requires change in use of bar/psi units with addition of switch. Full specification document available once freelancer is selected. Must be proficient in NANO's and ADC use. Proficient in English and previous projecte experience.

    $21 (Avg Bid)
    $21 Avg Bid
    13 bids

    We are looking for someone to create a micropython library for the VL53L1X TOF sensor. It needs to work with Pycom GPY, and preferably use the PyCom I2C module ([login to view URL]). It does not need to support all functionality that the VL53L1X supports, but should be able to at a minimum: - Verify that the sensor is connected and working (e.g. retrieve Module ID), check boot state, etc. - Retrie...

    $296 (Avg Bid)
    $296 Avg Bid
    3 bids

    We are looking for someone to create a micropython library for the VL53L1X TOF sensor. It needs to work with Pycom GPY, and preferably use the PyCom I2C module ([login to view URL]). It does not need to support all functionality that the VL53L1X supports, but should be able to at a minimum: - Verify that the sensor is connected and working (e.g. retrieve Module ID), check boot state, etc. - Retrie...

    $20 (Avg Bid)
    $20 Avg Bid
    1 bids

    looking for a specialist to build a firmware for nrf52840: 1. Going to sleep (System On Mode). 2. controlling PWM 3. Controlling Step motor controller 4. communicating with i2c eeprom 5. measuring voltage using ADC using native code (Not arduino or any). thx.

    $7 / hr (Avg Bid)
    $7 / hr Avg Bid
    13 bids

    I need to communicate between arduino nanos and raspberry pi using I2C and communication between different arduino nanos using IR.. Let me know if you're interested and I'll give you a detailed explanation to the project.

    $168 (Avg Bid)
    $168 Avg Bid
    17 bids

    Looking for a freelancer for an extremely time sensitive project, need to interface LCD with EFM8UB2 via I2C. Freelancer need to enable i2c communication in EFM8UB2.

    $237 (Avg Bid)
    $237 Avg Bid
    13 bids

    We're an EdTech company looking to develop an open-source project to get more people interested in the International Space Station - we've started the project already but are looking for an extra pair of hands to keep the momentum going. We'll be developing some electronics that the Raspberry Pi will control based on realtime data being published by the ISS - people will be able to ...

    $24 / hr (Avg Bid)
    $24 / hr Avg Bid
    26 bids

    I have a Raspberry Pi project working in python The Raspberry uses the I2C BUS to switch 16x Relays, monitor 16x Digital Inputs, monitor 8x ADC INPUTS The project is working in python & It measures, temp, rpm and other variables from various sources, outputs to the relays depending on conditions of inputs. The next stage of the project is a GUI, I've decided to go with Node-Red, So far i...

    $222 (Avg Bid)
    $222 Avg Bid
    21 bids

    PID CONTROLLER BASE ON ESP32/ESP 32 SOLO 1 THINGS TO INTEGRATE 1) RDL 4-20 MA LOOP CURRENT TRANSMITTER 2)MAX31865 PT100 MODULE 3)ROTARY ENCODER WITH PUSH BUTTON 4) I2C DISPLAY 5) BUTTONS AS PER REQUIREMENT NEED TO CREATE A PID LOGIC WITH AUTO TUNE AND MANUAL TUNE OPTION NEED WIRING SCHEMATICS ON LCD DISPLAY 1) RV(REAL VALUE)(0-100%) (VALUE IS SET IN CODE BY USER) 2) SV(SET VALUE) (0-100%)(VA...

    $94 (Avg Bid)
    $94 Avg Bid
    1 bids

    [login to view URL] [login to view URL] need pid with esp 32 i2c display current loop transmeter max31865 rotary encoder and buttons

    $104 (Avg Bid)
    $104 Avg Bid
    13 bids

    This should be easy task for professional. I have 3 bit input to arduino, according to state of the input arduino should change color to RGB diode. For example if input is 010 RGB will emit blue color, when input is 011 RGB will emit green etc etc... Diode i would like to use is with build in WS2812 controller and its connected over i2C, There are already a lot of libraries out there. Please apply...

    $24 (Avg Bid)
    $24 Avg Bid
    7 bids

    We are custom suiting company and we ship suits from our manufacturing to customers directly in the US. Looking for a company that can take care of all compliances and our customers see a US address it is shipped from. Open to learning more of the options and if packaging services are also available. Location: Karachi or Lahore. pricing is off course per products shipped or whatever pricing option...

    $1691 (Avg Bid)
    $1691 Avg Bid
    3 bids

    I am opening my homeopathic clinic and want a licensed Doctor who wants to sit. Terms and Conditions would be finalized soon.

    $431 (Avg Bid)
    $431 Avg Bid
    3 bids

    Can any one help to make function for read write to sensor. There are driver given by them on github... But I’m not able to make it work... This support I2C and SPI. I just need read write function thats all... Thanks you!!

    $50 (Avg Bid)
    $50 Avg Bid
    5 bids

    Looking for someone with experience in nRF52840 and ESP32 to communicate between the two modules and send two way data from nRF52840 and ESP32 wirelessly. nRF52840 will have an LED and I2C motor driver - TI DRV8830. ESP32 will be connected to the AWS IOT Cloud. Control of the LED and I2C motor driver should be done using MQTT protocol that is on the ESP32. NO Arduino code should be used !

    $169 (Avg Bid)
    $169 Avg Bid
    12 bids

    I want an expert to build Custom Yocto Embedded Linux Build with QT fast boot for the RaspberryPi and STM32. Must be comfortable with different Embedded Interfaces / Protocols like SPI, i2C, and be comfortable with Linux Embedded device driver development / customisation. Must be comfortable with QEMU simulation, I want to migrate to RaspberryPi (with custom Yocto OS that boots up to a QT GUI ...

    $19 (Avg Bid)
    $19 Avg Bid
    3 bids

    I have a Mega with built in ESP8266 ([login to view URL]) both parts programmed separately. My project consists of 10 Analogue inputs :- 9 x Current Transformers (STC-013-30) 1 x Voltage Transformer ([login to view URL]) 1 x Temp Sensors (Possible I2C) 3 x Digital Outputs 3 x Digital inputs I want the status of all of these to be reported back to a dashboard on "Things Board" or simi...

    $254 (Avg Bid)
    $254 Avg Bid
    18 bids

    I had enlisted a programmer on this site but with an increase of specification his revised quote was increased by 5x, this is not affordable. I need to finish the project in an affordable budget. I can provide the existing code as reference. It may need to be completely rewritten or amended. This is a personal project that i may in the future move to one including custom making of a circuit and b...

    $156 (Avg Bid)
    $156 Avg Bid
    14 bids

    We have a custom microcontroller hardware device that communicates with a mobile device via Bluetooth LE. All we need done for the first phase is to establish communication between the hardware controller (embedded C) and the mobile device (Android or Apple). GATT structure is very simple transferring only 2800 bytes in an array every 300 ms. We will supply hardware and schematics. Specifically, ...

    $1080 (Avg Bid)
    $1080 Avg Bid
    25 bids

    We are a small business B2B, I must have designed and produced a shield for the Arduino Micro, which contain a simple analog OSD MAX7456 and an I2C level converter for connecting a pressure sensor. 2 samples must be delivered and subsequently approx 100 ps.

    $145 (Avg Bid)
    $145 Avg Bid
    13 bids

    I need a small audio PCB with speaker term block terminations and a 3.5mm microphone jack. Need to drive 2w speakers. Also needs a humidity/temp sensor (296-46272-1-ND). Mayb this would work for audio IC? WM8962BECSN/RDKR-ND I need drivers for audio and mic to talk to Linux on a Jetson NX. I think Mayb it could communicate using I2C?

    $148 (Avg Bid)
    $148 Avg Bid
    17 bids

    We are one of the top E-commerce Marketing Agencies in London and we are in need of a techie developer from Lahore, Pakistan with the following skills: WordPress Shopify PHP/MYSQL JavaScript HTML/CSS Bootstrap Linux CentOs Ubuntu

    $502 (Avg Bid)
    $502 Avg Bid
    34 bids

    Hello, I need help for my project. Device: Raspberry Pi 3 with I2C, Blynk app, one water pump with 5v relay Sensors: water level sensor, 6 soil humidity sensor I need to design a fertigation system where when running, it can read all 6 humidity and water level in the tank. I also need to on and off the the water pump for the fertigation system. If possible, i would like the pump to be automatic...

    $139 (Avg Bid)
    $139 Avg Bid
    13 bids

    Need an Android developer having 2 years of professional working experience. Job Type: Part Time (4 hours a day) Salary: $200-$250 monthly #developer #android #remotejob #parttime

    $237 (Avg Bid)
    $237 Avg Bid
    4 bids

    I'm an old PIC programer (proton+, more like basic than C) with dozens of real world projects out in the field - trying to learn something new. I have built a base board for my Raspberry Pi (? boot, shoe - or whatever is the opposite of a HAT) to give me i2c access to ADC, DAC RTC, Serial and a few relays so I can learn how to control stuff. I've figured out how to use Python to talk ...

    $9 / hr (Avg Bid)
    $9 / hr Avg Bid
    11 bids

    We need PR services and Crew to launch a Political election campaign for MPA in Pakistan Lahore A person must have experience in dealing with media and have links to Promote and have access to media

    $6 / hr (Avg Bid)
    $6 / hr Avg Bid
    8 bids

    Hi I am designing eeproom emulator for my project. It should work via i2c protocol.

    $18 (Avg Bid)
    $18 Avg Bid
    9 bids

    project SOW is base on Tikets to go to site to repair to close tikets The servers location will be in 3 Cities in Country Pakistan: Istanbul, Karachi and lahore(each place 7 pcs servers), yearly warranty project, actual on-site tiket repairing service base on actual tikets happen, can be pay base on each single tiket (total project budget of one year around $3000)

    $2625 (Avg Bid)
    $2625 Avg Bid
    4 bids

    I am a Professional O'level and A'level teacher. However, I can teach Maths, English, Physics, Chemistry, Bio and Pak studies for O'level and Maths, Physics and Computer in A'level. I have A*s and As in the following subjects. My aim is to provide a classroom which would help in the moral, ethical and a cultural development of a child. I am from Lahore, Pakistan. Plus I can als...

    $97 (Avg Bid)
    $97 Avg Bid
    5 bids

    I need iOS Developer for Map Based iOS app on store, you must have atleast 2 years of experience and have atleast 3 apps on app store. I prefer someone from lahore, so we can meet if required. Regards

    $537 (Avg Bid)
    Featured
    $537 Avg Bid
    8 bids

    I have designed a custom PCB containing WM7841 codec IC. The digital interface seem not responsive. The I2C configurations are sent to the IC. But I dont see any response from the I2S. I expect you to review the schematics and the layout to investigate the issue. I can send the board if you need testing.

    $138 (Avg Bid)
    $138 Avg Bid
    5 bids

    Hi mrs. Afifa shahid how are you? Hi afifa shahid how are you? Abi tum na lalch main pari hui ho hai na? Baki agr ye e kuch krna tha na to shru se jb main puch rha tha tb ni hati? Dunyah ka ab pata chala hai asal main lahore ja [login to view URL] krna mera maksad ni tha such bolna maksad tha. Rshtydaro r logo ki bato ki prwah hti na to ase na kro. Mjy b bary bary hal btaty hain log dil se utarny ...

    $10 (Avg Bid)
    $10 Avg Bid
    1 bids

    Be sure you understand all details. You must have ESP32 devices for testing ! At least 2 devices ESP32 !!!! NO HARDWARE DESIGN REQUIRED ! We have 3 tasks: Task 1 - - - - - - - - - - Creating a full Bluetooth network for ESP32. (Bluetooth 5.0. ...distance range is required for more than 100 meters). We will test it outdoor. Network must have at least "Coordinator" and "End node&...

    $121 (Avg Bid)
    $121 Avg Bid
    8 bids

    Hi Habib, I would like to update our project as below pls: Update of the temperature code from project #1 to include: 1) Replace the temperature sensor with a pressure sensor using I2C protocol (see datasheet attached) 2) Update the code to account for an AND logic gate on the third LED. so reducing the outputs to 2 but allowing all 3 LED to be activated.

    $14 (Avg Bid)
    $14 Avg Bid
    1 bids

    Hi Habib, I would like to update our project as below: Update of the temperature code from project #1 to include: 1) Replace the temperature sensor with a pressure sensor using I2C protocol (see datasheet attached) 2) Update the code to account for an AND logic gate on the third LED. so reducing the outputs to 2 but allowing all 3 LED to be activated.

    $14 (Avg Bid)
    $14 Avg Bid
    1 bids

    UPDATE I have received and appreciate the multiple offers received. This has maade me look more carefully at the project requirements, and indeed to purchase / assemble the proposed hardware - to see what works and what doesnt. There's no point writing code for a platform that can't deiver, and i'm hoping to prove the hardware in the next few pandemic weeks. As it gets closer, I...

    $1142 (Avg Bid)
    $1142 Avg Bid
    15 bids

    Hello, 1. I am needed to be train Cross-compilation with ROS under Linux Machine. 2. and How to link libraries like Raspberry lib (I2C, wiring, and ...) in Linux Machine under ide (Qt or ...) 3. run a simple and intermediate project under Ros, to be compiled with Cross-compilation. the tutorial can be like video or pdf in detail. Thank you,

    $42 (Avg Bid)
    $42 Avg Bid
    4 bids

    Be sure you understand all details. If you want to ask something, read again the description of the project and be sure is not indicated here. Task 1 - - - - - - - - - - Creating a full Bluetooth network for ESP32. (Bluetooth 5.0. ...distance range is required for more than 100 meters). We will test outdoor. Network must have at least "Coordinator" and "End node" roles. Repe...

    $415 (Avg Bid)
    $415 Avg Bid
    6 bids