Install firmware nas200 jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    5,182 install firmware nas200 jobs found, pricing in USD

    ...com [login to view URL] Zeewifi [login to view URL] [login to view URL] [login to view URL] We need a simplified version of above products. For example: Our customer has a restaurant. We want to install an access point where his guests can login to surf the web. But, prior to their access, they must ‘like’or 'check in' his facebook page. When the guest chose to l...

    $518 (Avg Bid)
    $518 Avg Bid
    9 bids

    Design 3 products as I will provide the enclosure and the freelancer must provide the PCB complete design to fit within it and also firmware with a little webserver. The product is an I/O wireless based on LoraWan module, with external antenna communicating in Modbus. 1) It will have two relay outputs and two optoinputs, as well as a watchdog timer

    $1775 (Avg Bid)
    $1775 Avg Bid
    7 bids

    Design two products as I will provide the enclosure and the freelancer must provide the PCB complete design to fit within it and also firmware with a little webserver. The product is an I/O wireless based on ESP-32, with external antenna communicating in Modbus. 1) It will have two relay outputs and two optoinputs, as well as a watchdog timer circuit

    $155 (Avg Bid)
    $155 Avg Bid
    2 bids

    Project scope is for a ESP32 module to have bidirectional communication over Bluetooth to a Windows10 application. For that, is required the development of ESP32 firmware and the development of a Windows10 application. Freelancer needs to already have a ESP32 development platform. ESP32 used module for development purposes need to be one of three

    $176 (Avg Bid)
    $176 Avg Bid
    6 bids

    we are looking for an expert to program an RF-BM-ND04 is a Bluetooth Low Energy data module built on the basis of Nordic nRF52832. *Removed by Admin*

    $752 (Avg Bid)
    $752 Avg Bid
    20 bids
    Fix PCB Design 4 days left

    We're using a PCB connected to an adafruit bluetooth feather board to power LEDs and to charge an iPad. We have a few designs that aren't working well, and are in need...need of someone to produce an improved design that fits our requirements. The board just needs to power LED lights, charge an iPad, and connect to a bluetooth component with firmware.

    $486 (Avg Bid)
    $486 Avg Bid
    25 bids

    Firmware development for an embedded device written in c++ language on QT platform. Having expertise in XML, SQL, HTML, C++, Linux kernel.

    $2990 (Avg Bid)
    $2990 Avg Bid
    11 bids

    We are looking for a talented freelancer to work on a project to develop firmware for NRF52832 as well as build us a simple testing app for iOS to connect to the NRF52832. There are only a few commands and actions we need to execute and this should be a very simple project for anyone who has worked with NRF52832 before.

    $619 (Avg Bid)
    $619 Avg Bid
    17 bids

    We have been developing a lighting control system which consists of an app, hardware (LED drivers, wall switches, sensors), and MCU embedded software/firmware. We are a start up in Hong Kong aiming at providing the system to the Hong Kong market.

    $1293 (Avg Bid)
    $1293 Avg Bid
    32 bids
    FirmWare Developer 3 days left
    VERIFIED

    I am looking for a Firmware developer on STM32F411 or similar.

    $15 / hr (Avg Bid)
    $15 / hr Avg Bid
    26 bids
    EPROM Programmer 3 days left

    I need 2 EPROMS coded with updated firmware for a midi module I have. EProm's are marked in yellow.

    $13 - $26
    $13 - $26
    0 bids

    I need to edit and customise and existing Enigma 2 image used with TV set top boxes. Enigma 2 is an opensou...party developement teams. OpenViX, OpenATV, OpenPLi, Blackhole and Egami are just a few of them. Different teams support different receivers, not all teams provide image / firmware support for all makes models, this vary's from team to team.

    $47 / hr (Avg Bid)
    $47 / hr Avg Bid
    1 bids

    ...simple waveform generator to produce a square and a sawtooth waveforms, 2. meter which sends measured waveform parameters to the host PC over USB. The task is writing a firmware for the MCU based on STM32F4Cube HAL library and STM32CubeMX configurator. Target STM32F407VE MCU. Peripherals used: USB OTG FS port, Waveform DAC output pin, waveform ADC

    $2620 (Avg Bid)
    $2620 Avg Bid
    13 bids

    ...buttons) disable onboard wifi startup image (can be changed) status screen (batt, motor 1 speed, run time, estimated remaining time, batt temp) power on off wireless update firmware/software (preferably bluetooth low energy polling) energy management displays. esc throttle up and down (2 ESC motors) shutoff on overtemp adjust LED button light and 12 LED

    $740 (Avg Bid)
    $740 Avg Bid
    21 bids

    HI , I have a embdeed firmware to binwalk all source files ,then make some modifications in the software .

    $10 - $30
    $10 - $30
    0 bids

    Bluetooth CANBus Reader Firmware Development (OBDII)

    $111 (Avg Bid)
    $111 Avg Bid
    1 bids
    Firmware development 21 hours left
    VERIFIED

    We are developing and IOT based product and looking for someone who has good experience in quectel solution with at least 5 years experience.

    $2129 (Avg Bid)
    $2129 Avg Bid
    5 bids
    VENDING TELEMETRY 15 hours left
    VERIFIED

    ...Termoprinter /option/ The project requires: - To design the hardware /scheme and PCB/ of the controller with the assistance and guidance from the assignor - To write a firmware, which will execute the assigned tasks- this will be described in detail in the document containing the requirements - An official software module used to set (re-set)

    $5849 (Avg Bid)
    $5849 Avg Bid
    20 bids

    ... state-event transition diagram and main code template. The design is fragmented into many small relatively simple basic tasks for a freelancer to incrementally develop a firmware. System configuration has been done using *.ioc file generated with STM32CubeMX . Development environment: Hardware: Board STM32F407VET6 with Real Time clock crystal MicroSD

    $468 (Avg Bid)
    $468 Avg Bid
    15 bids

    I need you to develop firmware . Be like the picture attached .

    $68 (Avg Bid)
    $68 Avg Bid
    2 bids

    I need develop firmware for [login to view URL] modules. It is bluetoth temperature/humidity and audio sensor.

    $223 (Avg Bid)
    $223 Avg Bid
    27 bids

    I need develop firmware for [login to view URL] modules. It is bluetooth temperature/humidity and audio sensor.

    $532 (Avg Bid)
    $532 Avg Bid
    16 bids

    ...need to link up Hardware 1. Touch Screen Display 2. Bill Acceptor 3. Thermal printer 4. Raspberry Pi 5. MDB to USB converter (for bill acceptor) 6. Numeric keypad 7. Harness Firmware/ Front Programming 1. MDB USB module 2. Standalone app/ interface for raspberry pi 3. GUI for the standalone app Flows 1. User use touch screen and key in unit number @

    $442 (Avg Bid)
    $442 Avg Bid
    8 bids

    ...break, harsh acceleration, harsh turns and collision. We'll need the design files for producing and assembling the PCB (final product) and the documented source code for the firmware implemented. The PCB will receive power from an external power source of 5v or 3.3v. If possible, the final device should not require to be positioned in a predefined way

    $1112 (Avg Bid)
    $1112 Avg Bid
    60 bids

    Hi, We are looking for a freelancer who can develop firmware for ESP32 board, circuit for power supply and controlling the 16X16 led lights (WS2812B). Also we need Android App for controlling the led lights like sending customize or fixed images, text using BLUETOOTH. The freelancer has to provide the specification of the battery on which this board

    $398 (Avg Bid)
    $398 Avg Bid
    11 bids

    I am looking for someone who can design , build, program (firmware - Arduino) a complete SIM card (GSM) tank level monitoring system . the sensor must work on battery and not direct electricity . We need a level sensor ( ultrasonic or any other technology ) to monitor the level of water or diesel tanks via GSM SIM card . The sensor must be able

    $214 (Avg Bid)
    $214 Avg Bid
    40 bids

    This project is for Indian Companies only.

    $1409 (Avg Bid)
    $1409 Avg Bid
    6 bids

    elevate from standard user to an administrator on mac os, forgotten the root password, forgotten the boot firmware pass, and cant boot into target disk mode

    $57 (Avg Bid)
    $57 Avg Bid
    4 bids

    Modify bitmain x3 to mine the new cryptonight v7 algo(firmware?)

    $22 / hr (Avg Bid)
    $22 / hr Avg Bid
    2 bids

    ...serial (RS323) and validate data, if data OK it should activate relay (IO output) ESP8266 should also have a webpage for config options • Configure WiFi / hotspot • Update firmware over webpage • Configure validation option of RS323 input • Log of (etc. last 100) RS323 inputs Please comment with RS18 to make sure you read project description thanks

    $234 (Avg Bid)
    $234 Avg Bid
    46 bids

    Modify Bitmain x3 to mine the new CryptonightV7 Algo (Firmware?)

    $55 / hr (Avg Bid)
    $55 / hr Avg Bid
    1 bids

    ...also and needs to be scalable to very small dimensions.) 6. A brief introduction to my business/ organization: Over the years, they have developed hardware (PC boards) and firmware (specific operating systems) and sensors for a number of companies and Federal and State governments. Examples: high-speed laboratory spectrometers, automated parking sensors

    $35 (Avg Bid)
    Guaranteed
    $35
    52 entries

    ...metadata relative to the relevant safety profiles and will apply closed-loop machine-learning techniques to detect safety violations and alert conditions. The Security Engines firmware security integrity checking with specialized cross-compiler to help mitigate safety defects and cyber-attacks. The combined innovation objective of the engines is to develop

    $578 (Avg Bid)
    $578 Avg Bid
    1 bids

    ...metadata relative to the relevant safety profiles and will apply closed-loop machine-learning techniques to detect safety violations and alert conditions. The Security Engines firmware security integrity checking with specialized cross-compiler to help mitigate safety defects and cyber-attacks. The combined innovation objective of the engines is to develop

    $924 (Avg Bid)
    $924 Avg Bid
    1 bids

    It is a home automation project, made on espurna firmware, with mqtt protocol and node js. the communication is with mqtt and rest api any one, application is made up on cordova using nodejs and mongo db. I need anyone who can explain me this code to do futher updates i will pay 2500 also if he/she is good enough.

    $36 (Avg Bid)
    $36 Avg Bid
    2 bids

    ...10. Knowledge of embedded C/C++ and Python. 11. Strong experience on Core Python & Scripting, Linux firmware and driver designing is desirable. Required Experience, Skills and Qualifications Key skill required: C, C++, Embedded Software, Firmware, Embedded system, Python, IoT Protocols, UART, I2C, SPI. Hardware Skill required: Arduino, ESP8266/Nodemcu

    $344 (Avg Bid)
    $344 Avg Bid
    16 bids

    Smart Plug, WiFi socket, Esp8266 Firmware, Mqtt Note:Please Bid after reading full project details and If you are 100% confident you can do it. If you have already done similar project that will be positive. The main purpose of this project is to control the electric Device through internet as well as locally. The Device acts like a Wi-Fi switch

    $565 (Avg Bid)
    $565 Avg Bid
    12 bids

    ...internet as well as locally. The Device acts like a Wi-Fi switch or smart socket. • 1) We need MQTT or better if is possible • 2) A android App • 3) A IOS App • 4) Esp8266 Firmware with smart configuration App will send on/off commands to Mqtt broker If some reason router isn’t connected with the internet app will send commands directly to esp8266

    $2294 (Avg Bid)
    Featured
    $2294 Avg Bid
    28 bids

    A simple project to develop hardware & firmware for a triac based starting ramp controller. This project will provide basic hardware elements as a starting point. The Developer will have input into final hardware layout including the selection of Microcontroller to aid swift project completion. Project Condition 1. LOW COST/SIMPLE hardware requirement

    $266 (Avg Bid)
    $266 Avg Bid
    27 bids

    I am running the website and it related to the Samsung Galaxy firmware update and I want to get the api to all the firmware from Samsung to my website database.

    $187 (Avg Bid)
    $187 Avg Bid
    9 bids

    1. I need you tell me whta the devfee percentage is. 2. Need to know whitch address is devfee. 3. And i will need to connect to you by TeamViewer. You are gonna show me how it works.

    $186 (Avg Bid)
    $186 Avg Bid
    3 bids

    Set up a server which has virtual IP then the IOT devices can visit it and do Over The Air firmware update. the target is to replace the existing IP address embedded in the device to another different IP.

    $23 - $189
    $23 - $189
    0 bids

    ...m2: schematic design m3: pcb design m4: prototype production: this cost depends on BOM cost m5: peripheral driver testing(BLE, sdcard, microphone) m6: completion of firmware and iOS app I will send you the output and you will provide consultative guidance on things to change, add, remove, or think through. Total time for the project will be

    $30 (Avg Bid)
    $30 Avg Bid
    1 bids

    ... 2. Quectel M66 OCPU Programmer A.) Knowledge of Operating System programming(Eg. RTOS, FreeRTOS, ChibiOS etc) B.) Familiar with Quectel OpenCPU SDK. C.) Ability to make firmware for Flash RAM(32Mb) to store data during runtime and retrieve whenever required. D.) Knowledge of communication protocol TCP/IP with dual server configuration(dual IP data

    $402 (Avg Bid)
    $402 Avg Bid
    17 bids

    Hi Zhenan Goal is to build a device that w...PCB as per dimensions agreed upon 7. Prototyping of the device at a fab house, as per fab house actuals 8. 3-D printed case, as per fab house actuals 9. Build out and test firmware 10. Create iOS app (either standalone app with the required code, or use my app to add the code) 9. Test and final deliverable

    $650 (Avg Bid)
    $650 Avg Bid
    1 bids

    it is a gps+gsm Based electronic device (hardware is rady), which's firmware is to be developed. The GSM module is Quectel's MC60 and the Coding platform will be OpenCPU that is Quectel's own Firmware Development Platform. The data is to be fetched from the MC60's GPS and to be sent to the given Server. whole document describing the entire project will

    $939 (Avg Bid)
    $939 Avg Bid
    27 bids

    I want the developer to build me a smartphone firmware database on my website

    $151 (Avg Bid)
    $151 Avg Bid
    7 bids

    We have a firmware and communication will be made by us and I need design with WPF or UWP and 3D image to show by using unity api or library

    $7 / hr (Avg Bid)
    $7 / hr Avg Bid
    3 bids

    ...this supplier but to do this we will need to change the software that controls the current hardware. We have a current version of the firmware. We would need you to be able to do the following: 1 - Open the current firmware data as it seams to be locked 2 - once unlocked make any relevant changes that we need. Is this a project that you would be able to

    $7 (Avg Bid)
    $7 Avg Bid
    1 bids

    ...target platform and with the tools we use for it. The design is fragmented into many small relatively simple small basic tasks for a freelancer to incrementally develop a firmware. Each concurrent task is to be developed on the top of the previous task. Each task , as a "mini-project", is paid at a fixed price agreed upon and so on continuing to the

    $781 (Avg Bid)
    $781 Avg Bid
    27 bids