Iphone internet threw usb jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    4,305 iphone internet threw usb jobs found, pricing in USD

    we make power meter and it has usb connection to pc and data to be display on pc and it should be transfer to excel worrd etc

    $384 (Avg Bid)
    $384 Avg Bid
    2 bids

    I need my book edited for spelling punctuation and page layout. Its one of ...square and gagged him”. Carraig replied. We could see that the place had gone wild “Did you just see a leprechaun” men shouted. Women who had come to the fair to sell eggs threw their egg baskets on the ground and searched every nook and cranny looking for the wee man.

    $157 (Avg Bid)
    $157 Avg Bid
    15 bids

    ...projects with the board beaglebone black Rev C. I has installed Linux Debian, wheezy distribution, 3 serial ports enabled; ttyO0, tty01, tty02, it works with a screen adafuit HDMI, USB touch screen, the software is developed with Qt5, so the file system includes a toolchain and packages for cross compiling from windows. Now I am planning to use a waveshare

    $373 (Avg Bid)
    $373 Avg Bid
    9 bids

    I have firmware in C for a MikroElectronika "PIC Clicker" development board using a PIC18F47J53. It includes MikroE's USB library for CDC (USB RS232 emulation). Works fine on Windows, but on a Mac (e.g. OS-X 10.9.5) it registers a /dev/[login to view URL] port but doesn't communicate (hangs on host write to board). On Linux, it creates a /dev/ttyACMXX port

    $1507 (Avg Bid)
    $1507 Avg Bid
    10 bids

    Kernal Driver for windows 10. Kernal Driver receives a message from a USB device. Converts it to look like a message from second USB device. Send message to Application which receives messages from USB Device. Driver is to be used to allow new USb device with new id to communicate with existing Application witten in c#

    $724 (Avg Bid)
    $724 Avg Bid
    9 bids

    Mini-USB dongle with a mono phono input. The phono input is a 12v trigger input.

    $365 (Avg Bid)
    $365 Avg Bid
    7 bids

    I need to develop a library to interface an Arduino (UNO R3 or Leo) as USB HID haptic device. While basic USB HID gamepad library for Arduino exists in open source universe, I need one with Force feedback support. So in effect I should be able to program an Arduino so that when connected to a PC it should be read as a HID Gamepad with force feedback

    $995 (Avg Bid)
    $995 Avg Bid
    10 bids

    ...create an account and post their own items via mobile and/or web based. Each listing from the individual site will also be posted on multiple global sites (only as a click threw) where all the items are displayed from every individual site. When item/image is clicked they will be taken directly to the items auction page. They must agree to the terms

    $19 / hr (Avg Bid)
    $19 / hr Avg Bid
    29 bids

    I have api on localhost that send hello world message in json. It has been tested on Chrome Postman extension and works. I want to access tha...localhost that send hello world message in json. It has been tested on Chrome Postman extension and works. I want to access that JSON data from localhost on real device through USB. Have you done it before?

    $3 / hr (Avg Bid)
    $3 / hr Avg Bid
    3 bids

    Some years ago, I started a project to build a USB Audio DAC to connect to a computer and listen to music. The DACs are based in Arduino and WM8741 chips. I also made an Android APP to control the DAC with Arduino Bluetooth connection, the problem is I do not have time to evolve the project, and I need qualified help.

    $114 (Avg Bid)
    $114 Avg Bid
    9 bids

    For my 3amp, 18w ultra fast smart phone charger with single USB slot, I want mass production of it for minimum 1000 quantities. And for reference here I have attached sample images with dimension and my aim is to go for readily available mold with nearly same dimension and shape so as to save cost for die making process involved in it. So in order to

    $99 (Avg Bid)
    $99 Avg Bid
    15 bids

    We are building an IOT product (hardware) which would handshake with an android / windows runtime (application) via BLE, WiFi, USB (one of them at a time). After connecting with one or more devices, the runtime would send requests to these nodes retrieving data from a database. It would also display data based on the response received from the nodes

    $361 (Avg Bid)
    $361 Avg Bid
    8 bids

    I would want a firmware developed on ESP 32 that would have Wifi, BLE, USB communication to external environment (Phone / Cloud) and would communicate with a CAN enabled system such as a vehicle on the other side. The firmware should also have mesh network enabled. Can discuss more details on the project personally. Would prefer a developer from the

    $1181 (Avg Bid)
    $1181 Avg Bid
    10 bids

    I want to build a system by which when user uploading pdf files to serve(PHP and Mysql) using form ...uploading pdf files to serve(PHP and Mysql) using form submit from browser then before uploading files to serve they should get signed with digital certificate stored in smart card (USB Token). This should work in windows as well as linux environment.

    $285 (Avg Bid)
    $285 Avg Bid
    5 bids

    READ THREW MY SIMPLE SPEC and follow instruction or bid on others PLEASE I am thinking of invest in building a competitor to sites like [login to view URL], ahref and so on. you might have been doing this before or sit on good team and know how it shall be done I want SOW which include specification what you ready to build, time lime and to what price.

    $7527 (Avg Bid)
    $7527 Avg Bid
    34 bids

    i am looking to build a Site Like Twitter. threw wordpress

    $645 (Avg Bid)
    $645 Avg Bid
    9 bids

    For my charger manufacturing business, I need smartphone charger cabinet or enclosure designer and manufacturer and initially I need to get single USB charger cabinet manufactured and material to be used should be of high quality like premium PC materials with its features like heat resistant, fire resistant, drop resistant, corrosion resistant, compact

    $77 (Avg Bid)
    $77 Avg Bid
    26 bids

    Its a progam that was made by a programmer here on freelancer but don't know how to set it up and also its making use of a DNS list it was created in python....don't know how to set it up and also its making use of a DNS list it was created in python. (Program is already coded/created the only thing i need is get this program to work threw teamviewer)

    $17 / hr (Avg Bid)
    $17 / hr Avg Bid
    14 bids

    We have built a POS system and we have one element outstanding which is to print a receipt on our EPSON terminal printer locally on USB. We need source code which will first detect the default printer and print a certain document . A tip would be using QZ which can be found on [login to view URL]

    $210 (Avg Bid)
    $210 Avg Bid
    5 bids

    I will supply an APK that was wrote to work on a native android device with NFC reader and i need to be adapt to an Android device that have a USB NFC reader. i will provide the reader drivers from the USB NFC reader.

    $453 (Avg Bid)
    $453 Avg Bid
    9 bids

    A freelancer is need to write a USB mass media interface for legacy MS-DOS. This should be coded in C++ using the OpenWatcom compiler. The program will need to be written as a 32-bit protected mode executable. Along with the program, a test program should be provided. The test program should also be compiled as a 32-bit protected mode program. The

    $336 (Avg Bid)
    $336 Avg Bid
    6 bids

    Design image for a small flag. Image to include a camping tent,...include a camping tent, a hammock (no tropical imagery) attached to a tree(s) and maybe a fire. text overlay to say "The Lazy M&Fer's Campsite" included rough idea that I threw together. Images used can be clipart like or more photorealistic, no preference if it comes out looking good.

    $66 (Avg Bid)
    $66 Avg Bid
    52 bids

    PCIE USB 3.1 and 10 GB Ethernet card with trigger, Galvanic Isolation and drivers. 3D cad drawing a electrical simulations as part of delivery.

    $692 (Avg Bid)
    NDA
    $692 Avg Bid
    12 bids

    ...use Neoway M590E GSM/GPRS modem with USB-UART serial converter, looks like everything okay, but I can't communicate with the modem over terminal. I already tested the communication with the modem under Windows, everything fine, working. You need to check over teamviewer while the computer haven't access from internet. My budget is FIX $15 !!! while the

    $17 (Avg Bid)
    $17 Avg Bid
    7 bids

    Who can help me to build any tool which enables a remote connected remote usb PC to act as if, is connected to my own computer. I want to be sharing my usb software remotely.

    $30 (Avg Bid)
    $30 Avg Bid
    2 bids

    I needed a tool or software which will enable me to remotely share my usb with other remote computer(s). Example, for unlocking purposes

    $30 (Avg Bid)
    $30 Avg Bid
    3 bids

    ...allow to connect serial devices to systems using a USB interface. Connecting the converter to a PC, you get one extra high-speed RS-232/422/485 ports. It must have the auto-tune baud rate and data format to the RS-485 network (totally compatible with Modbus). The power converter derives from the USB port and doesn’t need any power adapter. It also

    $52 (Avg Bid)
    $52 Avg Bid
    3 bids

    I have started a business in a small is...promotional material designs created. One flyer would be for the English school part of the school. I will give you a few samples that I like to work from and the sample I threw together. While some English may be desired the majority of the wording should be in Japanese so japanese language ability is needed.

    $58 (Avg Bid)
    $58 Avg Bid
    80 bids

    Got a project where I need to extend a USB Type C via a circuit board. Require someone to route the schematic and PCB. There are only 2 components, the socket and plug. I have been advised that there is no need for any other components to extend the USB Type C. Using Wurth components 632723300021 and 632712000021. Will require doing it in CircuitMaker

    $80 (Avg Bid)
    $80 Avg Bid
    8 bids

    My wine brand...brand is called legasi... Im. Looking for a logo to use on tshirts and wine labels. I envisioned the I being a wine bottle and some how incorporating a grape vibe...i just threw anything on the pic... Im. Not sure how or where to incorporate the vine... Maybe even on the bottle image... Willing to pay a little more for the right design

    $33 (Avg Bid)
    $33 Avg Bid
    72 bids

    ...framework & 6 Modules. These modules can be turned on / of by admin (so not client) We are creating modules like : Clients, Calender , Quotations etc Data will be imported threw a API. Only place a reaction when you have done something like this before. We're looking for somebody who can support us in the long-term. We'll share full documentation

    $481 (Avg Bid)
    $481 Avg Bid
    36 bids

    There is a led on the cypres fx3 chip board. This function is to turn on the LED by pressing the button on the winform. uvc communication (1.1) version Using the extension unit command guidExtensionCode: {63610682-5070-49AB-B8CC-B3855E8D221D} By sending the extension unit command 0x0D through the above GUID, the LED control Since the maximum value is set to 9, the minimum value is set to 0, ...

    $10 - $30
    $10 - $30
    0 bids

    We are looking for a graphic designer to create a culture book that is about 60 pages wi...looking for a graphic designer to create a culture book that is about 60 pages with a hardcover. We want 3 concepts of the hardcover and our brand colors to display with a theme threw out the page it's for a dentist company that wants smiles throughout the page

    $96 / hr (Avg Bid)
    $96 / hr Avg Bid
    31 bids

    ...letter v going into each other , looks like they are stacked or going to slide into the next , coming off the v’s i would like wings coming off them . Then two swords that go threw the back off it like it they are on its back At the bottom of the logo have conquered The writting i would like bold , The color silver or gold This will be a logo for

    $50 (Avg Bid)
    $50
    16 entries

    This interface will be based on the Cypress EZ-USB chip and will be driven by a C/C++ program running on the PC. The C/C++ program will be written in modular format, with functions for each individual elementary/basic control of the devices that we want to control or monitor. Since this project will be part of a course for student training, all software

    $174 (Avg Bid)
    $174 Avg Bid
    3 bids

    ...take photos. Type of freelancer you're looking for - Never stop challenging - Can be manage the project and do the scratch development - iOS developer who has knowledge of UVC(USB video class) and OpenCV ref- [login to view URL] Anything unique about the project or team - The Github and the Jira will be use

    $1249 (Avg Bid)
    $1249 Avg Bid
    38 bids

    ...PC->HDMI->FPGA->HDMI->Monitor 2) PC->USB-> FPGA 3) The PC will send information to the FPGA and create an overlay on the monitor. This software on the PC could be coded in C++ or C. Example, DrawText(x, y, "Truck #19 ready for shipment.") There are many samples online but my knowledge is too limited to combine USB communication and Drawtext or shapes

    $356 (Avg Bid)
    $356 Avg Bid
    7 bids

    HELLO, I NEED TO ADD PRINT FEATURE via usb and bluetooth to an existing app with option on/off autoprint, number of copies i have code you can use it to generate the apk using phonegap

    $238 (Avg Bid)
    $238 Avg Bid
    12 bids

    We are a car rental company, and we need to make an xml connection interface with an agency that we work...parallel, where we can load availability and rates, by car models and dates, in some massive load format. Also, send us an email each time we receive or modify a reservation threw the interface. So, we will manually maintain both systems updated.

    $189 (Avg Bid)
    $189 Avg Bid
    14 bids

    1. way to check if there is any USB TOKEN / SMARTCARD with certification. 2. querythe device for some "string" in the description 3. send "PIN" to the device. 4. get certificate to sign document. all writen in DELPHI, can use OpenSSL or PKCS#11 pr PCSC dll or what evere needed. all must be free from any Copyright to any therd side

    $631 (Avg Bid)
    $631 Avg Bid
    3 bids

    I am looking a source code of MT7601U Wireless USB wifi adapter Windows Driver. If you can develop it or have it, please bid for me. Thanks.

    $4119 (Avg Bid)
    $4119 Avg Bid
    6 bids

    In order to use Dosbox Emulator on Android devices, we must be able setting the usb port to serial port function, thus, our DOS application will have communication with external serial devices.

    $577 (Avg Bid)
    $577 Avg Bid
    8 bids

    We are looking for USB chargers ID design,including USB Home chargers,USB Car chargers,Multi-USB charging stations with unique and compact design

    $170 (Avg Bid)
    $170 Avg Bid
    10 bids

    ...(with simple switch or similiar). The device must be connected with a computer with USB. On the computer, I have a software where I can define, at which number of device the LED should switch on. 100-200 of that device will be conncted to one computer, so I'm not sure, if USB is the best way to connect. Maybe a differnt way is much better, or a optical connection

    $1644 (Avg Bid)
    $1644 Avg Bid
    39 bids

    I am looking for some .Net code that will allow me to reliably send text commands directly to a USB port (not through windows print spooler).

    $401 (Avg Bid)
    $401 Avg Bid
    7 bids
    Trophy icon Sales USB website Ended

    We are in the process of creating a "website" that will be put on a USB to give to customers at Trade Shows. The website needs to be able to load and run with no internet connection. We have started this as seen in the attached dropbox link. Please use the information as a base for the website. We will need to be able to add pdf, pictures, and videos

    $200 (Avg Bid)
    Featured Guaranteed Top Contest
    $200
    18 entries

    Hi. I want to build a smaller version of the fly/mosquito racket/swat and I want to have a charging by USB capability

    $243 (Avg Bid)
    $243 Avg Bid
    8 bids