Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    261 kicad jobs found, pricing in USD

    I am looking for someone (expert) to search the internet for me and find schematic and PCB and BOM etc(all files for produce a board) of Linux bas...for me and find schematic and PCB and BOM etc(all files for produce a board) of Linux based (Ubuntu, Debian etc) mini computer. Please pay attention I need altium, eagle or kicad files not pdf or image

    $31 (Avg Bid)
    $31 Avg Bid
    6 bids

    Divide PS4 controller into two equal parts from the center (left and right) then replace the right analog stick with optical mouse sensor which will work as an analog stick.

    $177 (Avg Bid)
    $177 Avg Bid
    10 bids

    in shortest time I want a small PCB that can read indoor air parameters such as: air temperature, humidity, atmospheric pressure, CO2 (dioxyde), VOD, visible ...Connector on the PCB has to be JST HX type. A short demonstration coding to put the PCB at work upon delivery is also required. Schematics and BOM must be available, better if in KiCAD format.

    $664 (Avg Bid)
    $664 Avg Bid
    14 bids

    footprints and symbols and pub layout work using KiCAD

    $31 / hr (Avg Bid)
    $31 / hr Avg Bid
    11 bids

    Hi! I have a set of component that I need the schematic symbol and corresponding for in KiCad. I'm pretty sure that most of the components lack publicly available symbols and footprints, so you are expected to do the symbols and footprint on your own. High quality is expected. Ask if you have any questions. The full requirements are attached below

    $163 (Avg Bid)
    $163 Avg Bid
    14 bids
    KiCAD PCB Designer 9 hours left
    VERIFIED

    I need a PCB Designer experienced on KiCAD. I will need their past projects proving their skills on KiCAD.

    $195 (Avg Bid)
    $195 Avg Bid
    21 bids

    ...need a 2 layer PCB designing using the latest version of KiCAD (5.1.2 currently). We have created the schematic, we now need someone familiar with KiCAD PCB layout to take the schematic and create the PCB layout ready to send to the PCB manufacturers (so we will need gerber files as well as the KiCAD files you create). The PCB is 90mm x 64mm. All the components

    $157 (Avg Bid)
    $157 Avg Bid
    14 bids

    Hello, I created a schematic in KICAD for a little MCU-project. It is called "Aqua-Control" because with the MCU one can control pumps and display the temperatur of a aquarium. Due to the fact, that I dont have that much experience in creating circuits/schematics I need someone to verify that the created schematic is ok. As well I need a pcb layout

    $192 (Avg Bid)
    $192 Avg Bid
    44 bids

    I need kicad design expert for long time project. need good communication and quality for schematic and pcb, gerber, BOm I will share project via interview.

    $28 (Avg Bid)
    $28 Avg Bid
    11 bids

    Hi current one is simple one for testing. Looking for long term developer that has very experiences in kicad Thank you

    $32 (Avg Bid)
    $32 Avg Bid
    4 bids

    We have to make small changes on a schematic and PCB. Quite simple, but they need to be done right now. Design is in KiCad. Thanks!

    $28 (Avg Bid)
    $28 Avg Bid
    8 bids

    ...company based in the UK with over 20 years of experience. We are putting the finishing touches to a new product but have found a few PCB issues that need fixing. Existing KiCAD PCB design needs updating to new Issue: * We've already updated the schematic, * One connector footprint needs changing (from 2-pin to 3-pin), * Two ICs now get power from a

    $203 (Avg Bid)
    NDA
    $203 Avg Bid
    15 bids

    have completed schematic and it has ERC checking issues. need to fix the issues. i can share schematic file via interview.

    $35 (Avg Bid)
    $35 Avg Bid
    17 bids

    Project: Microcontroller based Industrial relay board with 10 relays. Requirements : We will provide schematics and BOM and datasheet in kicad. We want you to design the pcb very professionally to be used in safety critical industrial application. Pcb should be able to certify for ce,fcc,emi certification and safety standards. It will have ac and

    $188 (Avg Bid)
    $188 Avg Bid
    24 bids

    ...board will need to be reliable, will be running all day and ideally will run for years without fault. Please Review Rev D Attached for Details. Alter an existing design in KiCad with additional components: • Remove unused components. Some advice/consultation required here as to the correct components -previous experience with MCU’s is essential. •

    $251 (Avg Bid)
    $251 Avg Bid
    16 bids

    Alter an existing design in KiCad. Esp32 Design Remove several Components. Add Ac-Dc module. Generate bom list. Add lcd screen. fix all components in 3d design to main board. Generate 3d designs for components. Generate layout and final design files for pcb production. Please only experienced circuit designers with kiCad experience , The current design

    $41 (Avg Bid)
    $41 Avg Bid
    9 bids

    We are developing a Bluetooth product and we are looking for a CAD designer to design a casing for our product. We have the PCB 3D rendering exported from the KiCad and there are few external components needed to design to see the fitments of the casing, Such as connectors. The ultimate goal is to make a mold and manufacture the casing for our product

    $141 (Avg Bid)
    $141 Avg Bid
    59 bids

    How do you do? My name is Tjorben Eberle. I need a PCB designer for a few projects. I would like to start with the smallest project: I have an existing KiCAD project and I need some small changes. If the project is successful, I would like to order a PCB design from you, according to a fixed schematic. For the larger project, I will need you as a

    $79 (Avg Bid)
    $79 Avg Bid
    1 bids

    The schematic of the board is already finished. Al...board is already finished. Also all the correct footprints are already assigned. I just don't have the time to do proper routing of the board design. You would need to work in KiCad PCBNew and place all the parts and do the proper routing. Shouldn't take to long for somebody skilled and experienced.

    $169 (Avg Bid)
    $169 Avg Bid
    9 bids

    Project is about the conversion of a currently open source KiCad design into Altium. KiCad has 12 schematic pages Those need to be converted to Altium project, schematic and libray (.schdoc and .schlib)

    $193 (Avg Bid)
    $193 Avg Bid
    21 bids

    I have original schematic file and footprints. I need to redesign this. i will share more detail via interview. thank you.

    $132 (Avg Bid)
    $132 Avg Bid
    8 bids

    ...Engine Control Unit. The project is to design two PCBs: PCB_SHIELD and PCB_POWER per the schematic and supplemental requirements provided here in. The PCBs shall be design in KiCad (latest version), and all source files will be provided at the end. I will source the PCBs for manufacture....

    $414 (Avg Bid)
    $414 Avg Bid
    17 bids

    Design Circuit board and MCU software to take serial data form 5 barcode scanners, De-duplicate data and output on USB HID interface. PCB design in KICAD MCU ideally STM32

    $711 (Avg Bid)
    $711 Avg Bid
    9 bids

    ...with SMD LED board, for status indications, to be mounted on the front panel of the transmitter enclosure. Deliverables The circuit schematic and PCB designs must be done on KiCAD. Files must be submitted complete with all component libraries. Once the schematic is done, it will be verified on out end to make sure that all components, other than the CC2640

    $710 (Avg Bid)
    $710 Avg Bid
    14 bids

    The project is to design a very small pcb under KiCAD to provide complete Gerber files. It include 4 components according to the following BOM and circuitry.

    $26 (Avg Bid)
    $26 Avg Bid
    16 bids

    I need both a schematic drawn and a 5" x 2.5" PCB (4 layers) designed. The sch...descriptive package for the schematic. After the schematic is reviewed and complete, I will provide a PCB descriptive package. You can draw both schematic and PCB using either KiCad, Eagle, or YOUR CHOICE of tools. For right now, please tell me your tool preference...

    $20 / hr (Avg Bid)
    $20 / hr Avg Bid
    60 bids

    Alter an existing design in KiCad. Esp32 Design Remove a few Components Add a screen Please only experienced circuit designers , The current design is proven and these addition must work first time .

    $43 (Avg Bid)
    $43 Avg Bid
    6 bids
    $33 Avg Bid
    5 bids

    Project is about the conversion of a currently open source KiCad design into CircuitStudio. KiCad has 13 schematic pages, most are simple, and a pcb 4 layers. Total components 149, Those need to be converted to CircuitStudio project, schematic and pcb.

    $10 (Avg Bid)
    $10 Avg Bid
    1 bids

    I I have a gerber files and i need them manualy redone into EAGLE or KiCad. The Gerber is SUPER SIMPLE and i need it done in a hour or so for 10-15 USD

    $20 (Avg Bid)
    $20 Avg Bid
    21 bids

    I have a hand drawn circuit diagram. I need it drawing out properly in KiCAD then a 2 layer PCB designing for the circuit (all in KiCAD). The circuit is not large, it has a 28 pin dil microcontroller, a square GSM module (surface mount), two relays, a couple of smaller dil ic’s (smps and eeprom), plus a handful of other stuff, like caps, resistors,

    $159 (Avg Bid)
    $159 Avg Bid
    5 bids

    ...transition steps of non vector images cause very small sharp points in copper that eject electrons and lower the Q at the frequency of resonance. I tried to do this job myself but Kicad PCB graphic importer doesn't like the .svg file format for some reason. Other than layers of spiral gaps in the copper planes this thing has about 32 plated through holes. Documentation

    $533 (Avg Bid)
    NDA
    $533 Avg Bid
    21 bids

    ...at 8Ghz). one 400 pin FMC HPC connector 4 x 160 pin socket 1 x USB otg connector 1 x power connector 1 x 50 GPIO connector Schematic provided by me in KiCad (free software). PCB layout in KiCad (can be converted from other formats) to be provided by freelancer along with PCB fabrication files. Signal integrity report to be provided by freelancer

    $506 (Avg Bid)
    $506 Avg Bid
    22 bids

    ...have attached a block diagram in the files section, yeah...sorry it's the best I can do. You're also welcome to suggest changes to the BOM. You can use Altium, EagleCad, or KiCad for the boards design. That's really about all the information I can provide you, what can I say, my needs are simple, the idea is simple. BOM: (This is only an example of

    $118 (Avg Bid)
    $118 Avg Bid
    73 bids

    Hi I hope you're doing well I need someone to help me with design my power supply in kicad. I need both the schematic and the layout please. thanks! I don't know why I could not put the estimated budget price but it is 20-35$ [login to view URL] https://www.amazon.com/gp/product/B07DR7VNX1/ref=

    $141 (Avg Bid)
    $141 Avg Bid
    13 bids

    ...solution have to be checked together; - simple testing firmware included (eg: C, Lua,... I have already coded some working example); - files available for further use (eg: for KiCad); 2- prototype PCB produced in small testing series (about 10pcs: lesser or more, according to optimal prices): - suggestions are welcome: if You know a very good producer

    $506 (Avg Bid)
    $506 Avg Bid
    24 bids

    ...worked with before? 2. Do you want to write the code as well or just do the PCB design (this can be a separate quote)? 3. What software will you use for PCB design? We use KiCad so if you can use that it's better but not 100% necessary 4. How long do you think it will take you to do the PCB design? 5. Do you think you'll be ok being limited to 2

    $351 (Avg Bid)
    $351 Avg Bid
    34 bids

    I need a KiCAD expert for updating my previous design files. Please bid if you have many experience with KiCAD.

    $168 (Avg Bid)
    $168 Avg Bid
    14 bids

    I need a KiCAD expert for updating existing design files. I will share the files after you contact me.

    $52 (Avg Bid)
    $52 Avg Bid
    4 bids

    RJ45 /POE /W5500 chipset custom Arduino ATMEGA1284 board I need a kicad project file with these components connected on SPI on a custom pcb - I need an estimate quote. Will deliver schema for connections, but they need to be checked for correctness. Purpose is to have 5 prototypes built with PCBWAY (PCB+Assembly)

    $33 (Avg Bid)
    $33 Avg Bid
    6 bids

    I would like a board designed in Altium Designer, KiCAD or Eagle that is PIN compatible with the ZYBO Z7-20 board from diligent, but has only the essential circuitry required for RAM, Power, Jtag, and the CSI camera. Please and thank you.

    $15 - $25 / hr
    $15 - $25 / hr
    0 bids

    I would like a board designed in Altium Designer, KiCAD or Eagle that is PIN compatible with the ZYBO Z7-20 board from diligent, but has only the essential circuitry required for RAM, Power, Jtag, and the CSI camera. Please and thank you.

    $591 (Avg Bid)
    $591 Avg Bid
    26 bids

    ...solution have to be checked together; - simple testing firmware included (eg: C, Lua,... I have already coded some working example); - files available for further use (eg: for KiCad); 2- prototype PCB produced in small testing series (about 10pcs: lesser or more, according to optimal prices): - suggestions are welcome: if You know a very good producer

    $402 (Avg Bid)
    $402 Avg Bid
    40 bids

    ...workflow gap for PCB Mounting with a Pick-and-Place Machine. There is 2 larger Pieces involved #1 (ASCII) Data Transformation #2 Visually supporting Mapping of Components in KICAD to "Reels" (Components loaded into the machine) # Constraints: - Software should be developed in Python and not contain Proprietary Modules. - Copyrights of the Software will

    $644 (Avg Bid)
    $644 Avg Bid
    10 bids

    We have a kicad rat's nest with all the connections made. We would like to have the high speed digital board laid out and work the first time. If you are really good at high speed digital design including lpddr and wifi we would like to talk to you.

    $1329 (Avg Bid)
    Urgent NDA
    $1329 Avg Bid
    16 bids

    I need someone to design and deliver a KiCad PCB with a few components: * NodeMCU * 3V Relay * 3 Resistors * 1 RGB LED * 5mw laser diode * Button From what I've been told it should be a small design, about the size of a credit card. I need to receive everything necessary to request a small run of PCBs for a first hardware prototype. If interested

    $152 (Avg Bid)
    $152 Avg Bid
    30 bids

    Hey, How are you? I have few files in KiCAD format. I want them in Altium. And i also want the layout of the board. Everything should be same as in KiCAD. Just in Altium. I can send the files on chat and you can let me know. Its a PICOEVB Board. Thanks

    $80 (Avg Bid)
    $80 Avg Bid
    1 bids

    Hey, I have few schematic files in KiCAD format. I want them in Altium. And i also want the layout of the board. Everything should be same as in KiCAD. Just in Altium. We can discuss more on chat. Its a PICO EVB Board.

    $80 (Avg Bid)
    $80 Avg Bid
    1 bids

    Hey, I have few schematic files in KiCAD format. I want them in Altium. And i also want the layout of the board. Everything should be same as in KiCAD. Just in Altium. We can discuss more on chat. Its a PICOEVB Board.

    $80 (Avg Bid)
    $80 Avg Bid
    1 bids