Filter

My recent searches
Filter by:
Budget
to
to
to
Skills
Languages
    Job State
    4,576 lcd flash jobs found, pricing in USD
    Arduino Project (Code) 6 days left
    VERIFIED

    Good day. I would like to make a puzzle bomb. I have the following hardware that I would like to use to run the program: Arduino Uno or Mega 5110 LCD Display DS3231 Real time clock 5 Photo resistors Hall effect sesnor Buzzer module/speaker The timer counts down for 60 minutes. Displayed in large numbers with minutes and second (timed from real time

    $35 (Avg Bid)
    $35 Avg Bid
    22 bids

    ...firmware updation is to be done so that the additional motors as mentioned in point 1 & 2 above can be automatically controlled by the GRBL based generic controller. Further LCD interface of the GRBL has to be updated to remove features pertaining to milling and add options suitable for the Fabric cutting machine. Is automatic control is opted in point

    $17575 (Avg Bid)
    NDA
    $17575 Avg Bid
    1 bids

    Group 5 – PIN and Alarms 1. LCD: Prompt the user to enter a 4-digit Pin using the keypad, and to use PH2 to start over. 2. 7-Segment Display: Initially display all dashes on the 7-Segment Display digits. 3. KEYPAD: Allow the user to enter 4 sequential digits. 4. 7-Segment Display: As each digit is entered, display the entered digits from left-to-right

    $21 (Avg Bid)
    $21 Avg Bid
    1 bids

    Making a custom wireless alarm clock. Would like a circuit diagram and custom PCB board made. Main alarm clock components include lcd screen, rechargeable battery, micro usb charge port, buttons, and vibrating motor for alarm.

    $209 (Avg Bid)
    $209 Avg Bid
    26 bids
    FIPY and PI Project 5 days left
    VERIFIED

    ...4Ghz Wifi station (that is also doing the beaconing) SMS to have 10 different messages for responding using 3 different button funtions, up, down and ok. Messages to display on LCD screen Windows based SMS text messenger to send over wifi 5Ghz Wifi to be setup as an Access point for local, configure SSID and password. network traffic connection, bridge

    $474 (Avg Bid)
    $474 Avg Bid
    2 bids

    ...Discovery. Please take a look on [login to view URL] I had wrote my software for this board. I use exactly the same SD-Ram, QSPI but another LCD-Display. I also need a few additional features I also need a few additional features. Like CanBus, battery for the clock, free pins on plug out for an auxiliary board.

    $676 (Avg Bid)
    $676 Avg Bid
    26 bids

    1. Need the power supply to be arranged as portable which should has a feature of withstanding 2 days minimum. 2. Need LCD module to be attached with monitoring of temperature /Humidity sensor. 3. A compact and stylish case for the entire module. 4. Sensor can be inside or outside the module , but it should be covered with a case.

    $118 (Avg Bid)
    $118 Avg Bid
    11 bids

    We are designing the Phone and looking for a Expert who has Expertise on AMOLED and it's Components.

    $155 (Avg Bid)
    $155 Avg Bid
    1 bids

    ...por debajo de un limite, encienda o no el riego. el porcentaje deb ser programable. el codigo debe tener una contraseña de ingreso y esat informacion de visualice en pantalla lcd 4x20 lineas. el ingreso de info atraves de un teclado matricial 4x4 y los preactuadores es un modulo de reles de 8 canales 8canales....

    $96 (Avg Bid)
    $96 Avg Bid
    8 bids

    ...interrupt the air flow when the desired air pressure is achieved 3) Secondary solenoid: to be used to allow air to escape when deflating the tires. There would also need to be an LCD control panel that would allow you to 1) Monitor current pressure 2) define intended air pressure via buttons (up or down) or via rotary knob 3) view defined pressure set with

    $590 (Avg Bid)
    $590 Avg Bid
    25 bids
    tiva c launchpad 3 days left

    interfacing of LCD, keypad, stepper motor and light sensor with tiva c series launchpad

    $127 (Avg Bid)
    $127 Avg Bid
    6 bids

    ...our system developed with arduino + rtc shield + relay + hygrometer + dht22 etc. It interfaces with an App for Android or Ios, to visualize the sensor data, to write on the LCD the steps of the automaton for precision irrigation. It will also be possible to activate the relays to the pin connected on the arduino with the button. Regarding the connection

    $1437 (Avg Bid)
    $1437 Avg Bid
    31 bids
    Chinese Lady Singer Needed! 2 days left
    VERIFIED

    ...We like LCD Soundsystem, Giorgio Moroder/Donna Summer, VU, the Beatles, MBV, some K-Pop. Here's a old-school classic techno dance sound to give you a ballpark idea of a stellar vocal + music performance: Donna Summer I Feel Love 12" version 1977 [login to view URL] Here's a cool track we like: Tribulations by LCD Soundsystem

    $173 (Avg Bid)
    $173 Avg Bid
    1 bids

    ...LTD is New Zealand based IT Company. We are a Microsoft registered refurbisher company. We recycle and refurbished all type IT equipment such as Computers, Laptops, Servers, LCD, Router Switches, Network Equipment, Mobile, Tablets, Phones, Printers, Projectors, UPS and all Electronics Equipment. Website project: [login to view URL] (platform: shopify)

    $6 / hr (Avg Bid)
    $6 / hr Avg Bid
    23 bids

    The freelancer must do a project and select a sensor to read a AC current from 1 amp to 0 amp. Read it with a pic and show the value in an lcd display.

    $202 (Avg Bid)
    $202 Avg Bid
    40 bids

    Hello, I am looking f...looking for a data scrapping expert. I am deciding between you and another guy from Russia. What we need is to capture the data from [login to view URL], specifically the LCD specifications of each LCD model. There is captcha protection on their website if you make too many frequent connection attempts. Are you able to get this done?

    $20 / hr (Avg Bid)
    $20 / hr Avg Bid
    1 bids

    interfacing lcd , keypad, stepper motor, and electronic brick sensor RB-ite-24 using TIVA C series launchpad

    $136 (Avg Bid)
    $136 Avg Bid
    2 bids

    ...ov7670 camera sensor „ with keil „) I have a complete program with me, it work well but I don’t get real Footage as Output on the LCD ... what i exactly need is two things.. First : to get a clear picture on the lcd ( real footage ) (( should just do changes with my Settings function)) Second : i have to save the output pictures on sd-card, I have

    $30 / hr (Avg Bid)
    $30 / hr Avg Bid
    1 bids

    ...ov7670 camera sensor „ with keil „) I have a complete program with me, it work well but I don’t get real Footage as Output on the LCD ... what i exactly need is two things.. First : to get a clear picture on the lcd ( real footage ) (( should just do changes with my Settings function)) Second : i have to save the output pictures on sd-card, I have

    $200 (Avg Bid)
    $200 Avg Bid
    1 bids

    ...ov7670 camera sensor „ with keil „) I have a complete program with me, it work well but I don’t get real Footage as Output on the LCD ... what i exactly need is two things.. First : to get a clear picture on the lcd ( real footage ) (( should just do changes with my Settings function)) Second : i have to save the output pictures on sd-card, I have

    $59 (Avg Bid)
    $59 Avg Bid
    1 bids

    I need a Customer Survey System to display in 49′ touch LCD standing kiosk in the restaurant. The purpose is for dine in customer to rate and comment the foods after they proceed payment. For the new customer, they can review the top cuisine, top drink or top dessert of the restaurant. My requirement only two pages for this system: 1. Page for

    $163 (Avg Bid)
    $163 Avg Bid
    6 bids

    ...places 100+ candidates in Top MNCs firm after the end of Linux training. Webtracker offers the facility of a lab facility for practical use. good tool, class AC, intelligent LCD class, personality development course, interview session, English speaking session 8+ years of real-time experience. Webtracker follows the performance monitoring process for

    $1099 - $2198
    $1099 - $2198
    0 bids

    write a program to interface LCD , keyboard with tivc c board. control stepper motor position using keypad interface sensor ( light sensor ) with tiva board

    $132 (Avg Bid)
    $132 Avg Bid
    14 bids

    This project is to design an arduino board with an lcd display that will use one gas sensor to monitor for a gas leak and one sensor to monitor a water leak. The unit will be powered by a cars 12v battery, the unit would also time hours of use ie when turned on and have a GPS tracker. I require all simple designs, the code and also links for items

    $158 (Avg Bid)
    $158 Avg Bid
    19 bids

    Per week 6-7 hours work and payment 25~30K INR Writing BSP and Device Drivers (PCI, SDIO, PMIC, I2C, I2S, Audio, Display LCD/MIPI C, C++, Android-Cmake, Yocto or buildroot addon JTAG

    $18 / hr (Avg Bid)
    $18 / hr Avg Bid
    7 bids

    The green...first board has a 4x16 screen and buttons. In the second board there are sensors - temperature, soil humidity, air humidity, light sensor. There are also controls - DC fan, LCD light, water pump, servo motor for raising the window. All data from the second panel must be displayed wirelessly on the first board. Two Microchips PIC18F14K22.

    $88 (Avg Bid)
    $88 Avg Bid
    6 bids

    The green...first board has a 4x16 screen and buttons. In the second board there are sensors - temperature, soil humidity, air humidity, light sensor. There are also controls - DC fan, LCD light, water pump, servo motor for raising the window. All data from the second panel must be displayed wirelessly on the first board. Two Microchips PIC18F14K22.

    $190 (Avg Bid)
    $190 Avg Bid
    7 bids

    ...ov7670 camera sensor „ with keil „) I have a complete program with me, it work well but I don’t get real Footage as Output on the LCD ... what i exactly need is two things.. First : to get a clear picture on the lcd ( real footage ) (( should just do changes with my Settings function)) Second : i have to save the output pictures on sd-card, I have

    $60 (Avg Bid)
    $60 Avg Bid
    1 bids

    ...ov7670 camera sensor „ with keil „) I have a complete program with me, it work well but I don’t get real Footage as Output on the LCD ... what i exactly need is two things.. First : to get a clear picture on the lcd ( real footage ) Second : i have to save the output pictures on sd-card, I have already a program for SD card write and read, maybe

    $59 (Avg Bid)
    $59 Avg Bid
    1 bids

    Update (or develop) a Windows driver (KMOD) for Display and Touch panel to be installed on Raspberry Pi 3 (ARM) running Windows 10 IoT. Both drivers shall be able to be installed and work as system devices. Below is an example with Adafruit display (similar hardware). Platform: Windows IoT 10.0.16599 Hardware: MPI3501 Display (SPI) and XPT2046 Touch (SPI) - ATTACHED. Attached is detailed de...

    $614 (Avg Bid)
    $614 Avg Bid
    3 bids

    Hi, I need help to include this library: [login to view URL] in my Android things project....org/blog/[login to view URL] mounted here and I will replace the Arduino with the [login to view URL] card and I will show the digits typed / received from the telephone line on the LCD monitor of this card's Kit using GOERTZEL ALGORITHM

    $25 (Avg Bid)
    $25 Avg Bid
    1 bids

    Hi, We have a specific need to connect LT031MDZ4000 MIPI DSI LCD display with Banana Pi board. We have adapter board ready made by all specifications. You need background in MIPI - DSI and driver writing. PLEASE UNDERSTAND, THIS IS SERIOUS PROJECT AND IS NOT WEB PROGRAMMING. We have all documents ready, please participate and we will send

    $6122 (Avg Bid)
    $6122 Avg Bid
    9 bids

    ...Technical Specifications * WORKSTATION’S CONFIGURATION:- Higher Processors: Windows XP Desktop Machine with Operating system CPU: - Dual core 3Ghz Ram 2 GB DDR2/3 LCD 16” inch HDD 160 GB 1mbps Internet Reference center is in Bangalore. Center can visit there to see the operations. They are running for 4 months. Payment proof can be

    BPO
    $11960 - $23920
    $11960 - $23920
    0 bids

    • 2 step motor control • 2 dc motor control • 1 dc motor control(bidirectional) • 1 current sensor, 1 object(distance sensor) • 20x4 LCD display • 11 pins membrane switch • 2 dip switch(end stop) • 4 channel remote control • 1 buzzer • bluetooth 4.0 connection for phone IMPEDANCE MATCHİNG , EMI/EMC, ESD PROTECTİON CE CERTIFICATE

    $656 (Avg Bid)
    $656 Avg Bid
    24 bids

    ...days while implementing the project. This must be agreed before undertaking the work. The project will involve - An Arduino Uno - 2 DHT22 sensors - 3 Relay modules - 1 LCD Display - Manual override control buttons The sensors will be in a chamber where they will need to take control of humidity and temperature. The temperature will need to remain

    $25 (Avg Bid)
    $25 Avg Bid
    8 bids

    Hi, Attached the two images. The front and back of the circuit. This circuit reads the data from the TDS probe and displays it on LCD screen. This works on the 5 volts supply. I need details of the connection and schematic. Want the TDS value displayed.. 2 days and 100$

    $165 (Avg Bid)
    $165 Avg Bid
    15 bids

    ... Minimum Speed: 10 rpm (rotation speed change step| increment value) Time range: 1 second to 168 hours 3. GUI based control system with 5-inch width touch screen LCD display or phone screen with Remote Control. [virtual buttons and sliders (GUI)] 4. Color sensors will be installed on PCB Board. 5. User ID/Password set up. 6. The

    $3062 (Avg Bid)
    $3062 Avg Bid
    13 bids

    ...Multiplexed DDS using iCE40UP5K breakout board. Apart from the Multiplexed DDS core itself, an i2s module for a DAC chip, Encoder modules for control of waveform parameters and an LCD module are present. Functional verification is done and behavior in simulation is as expected. What is needed is proper post-synthesis simulation (verification an debugging)

    $119 - $594
    Featured Urgent Sealed
    $119 - $594
    6 bids

    I need a base boar...gauge 2 x 220VAC 5A standard footprint relay Piezo beeper Internal I2C pins for LCD Reset/test button 2 x bi-colour status leds AdaFruit Feather specification socket to accept any Feather board SD card 2mbit I2C flash Human interface (mounted on enclosure) LCD – I2C connected 3 key membrane panel - 4 wire connection

    $331 (Avg Bid)
    $331 Avg Bid
    8 bids

    ...three DIP switches inputs to control/select the display of four different messages with four different display formats (the ways the message is presenting/displaying) on an LCD module. The message and format cannot be combined in a single DIP selection. The present code in Assembly language Code must have comments 4 messages are freelancer

    $40 (Avg Bid)
    $40 Avg Bid
    10 bids

    ...ammeter ( 0-30 Amp - Using 1:1000 Amp CT) using PIC16F914 & code using CCS Compiler. I need the transformer less design due to limited space constrains . I Want to use the Custom LCD to Display that with 2 Back lights led . It should fit on a circular board of 1.71" dia. the meter should be powered from the source it is measuring (AC Input) i.e PIC Cannot

    $128 (Avg Bid)
    $128 Avg Bid
    6 bids

    I want to make and arduino based camera slider. Involves work with adfruit lcd screen, stepper motors, end switch etc The project in question is given below [login to view URL]

    $93 (Avg Bid)
    $93 Avg Bid
    8 bids

    I want to use an Arduino to display pressure (resistive sensor 0-10 bar), temperature (pt100 type -10 - 130 ), engine rpm (0-6600) and a voltage (0-30). The display can b...want to use an Arduino to display pressure (resistive sensor 0-10 bar), temperature (pt100 type -10 - 130 ), engine rpm (0-6600) and a voltage (0-30). The display can be 16x2 lcd

    $253 (Avg Bid)
    $253 Avg Bid
    51 bids

    ...modifying ccnsim sample codes (caching and replacement) and provide a new contribution to give better performance (hit ratio) compared to the one of sample codes such as LRU , LCD. The tools we will be used: • Ccnsim 0,4 • Omnet 5 • Linux OS • C++ Language Ccnsim sample code: [login to view URL] Videos for Installation (Omnet

    $155 (Avg Bid)
    $155 Avg Bid
    2 bids

    ...be around $100usd . Is it possible to use this buck controller in the system ? [login to view URL]

    $131 (Avg Bid)
    $131 Avg Bid
    5 bids

    Build a small device with an LCD display operated by small cosumtion baterries

    $163 (Avg Bid)
    $163 Avg Bid
    21 bids

    ...stable until the time I set is expire, then an alarm notice me what is the next step, stop the process or set another temperature and time. My hardware is: Arduino Uno Arduino LCD KeyPad Shield (SKU: DFR0009) WATERPROOF TEMPERATURE SENSOR DS18B20 DS3231 REAL TIME CLOCK MODULE 1 relay module for arduino Please if any extra module is required notify me

    $30 (Avg Bid)
    $30 Avg Bid
    3 bids

    ...saved virtual pet is present, a new virtual pet is started. • As its default behaviour, the software displays all the statistics of the virtual pet (see next point) on the LCD. The exact way of displaying these is your choice. • The virtual pet has the following statistics: o Development stage, which is 0 (egg), 1 (young), or 2 (adult). o Happiness

    $201 (Avg Bid)
    $201 Avg Bid
    25 bids

    ...a variable resistor, a 8x2 parallel LCD screen and a stepper driver with step/direction and MS pins connected. The code should output the required frequency (defined as an array) in the range of 20 - 2000 Hz (frequency of one step) with the defined micro stepping settings, output the speed, direction on the LCD screen. The frequency should be accurate

    $227 (Avg Bid)
    $227 Avg Bid
    34 bids