# Matlab monte carlo simulation jobs

The fixed rectangular bed made of Titanium material, its dimension is (80 mm by 80 mm) and 20 mm height. On the top surface of the fixed rectangular bed (means at 20 mm height) laser heat is applied in the middle of the bed which is called print block and its 2D dimention initially 30 mm by 30 mm and made of same maertial Titanium. The laser is moving horizontally from 0 mm to 30 mm. see upl...

Login facebook with user, password and get cookies, access token via curl php **simulation** browser

There are two parts of this project. 1. Simulated the given paper and obtained all the given results according to paper. 2. Compare some results.

**Matlab** **simulation** for a grid-tied residential solar PV system with battery
Required: **Matlab** **Simulation** for a 3kW solar Photostatic (PV) system integrated with 5kWh Battery Energy System (BES) for a house in Australia (its average daily consumption is15kWh/day).
- Your **simulation** design must be 100% same as the "Expected **Simulation** [login to view UR...

...Risk and size of drawdowns
b) Amount of money to be bet
I would like to understand the statistical distribution about my scenario (normal distribution?) + be able to run **Monte** **Carlo** scenarios where I can actually analyze the differing outcomes. This should be all be done in Excel.
The task:
I would like a dynamic model developed in Excel where I can

I need a Java programmer to implement the algorithms in the planning main to [login to view URL] file in the [login to view URL] file provided in the attached files of the project and generate the same results included in the paper .more details are attached to this project

hello I am a student in master 2 security informa...student in master 2 security information systems in fact i need help for my end of studies project that is under the theme of attack on a connected car I have to do a **simulation** with ns3 software using c ++ source code ,for the money I can pay 60 USD is there anyone who can help me at this point

hi, I am a student in my 2nd year Master in security of information systems and i need to do a **simulation** in NS3 on IoT attack on a connected object in a smart home.

we have set an authentication model for communication between entities in the IoT application, thus we need to simulate the model using the Omnet++ and validate the work using AVISPA , which both are relative IoT software the method described in the doc ... the yellow highlighted section (phase)

I need you to simulate authentication process in IoT based on fingerprint and primary key. I would like this **simulation** to be carried out using omnet++.

To whom it may concern, DDSGroup is looking for a developer for one of its many projects, feel free to read about it down below. We would like to be able to simulate all mouse and keyboard events onto different clients on one computer. We will be running one main client (human) and 1 ~ 20 sub clients (simulated from the main client). If the main client turns the camera around its character, all ...

Purpose of this project:
Create a sample data set from the perspective of an autonomous car in **simulation**.
Usually autonomous cars have lidar and camera sensors. Gazebo can simulate both of them and there is a prebuilt city, vehicles and sensors available. In order to run Gazebo in a usable way you need a _powerful_ machine.
Steps:
1. Install ROS

I need an algorithm to be developed for wireless sensor networks and be simulated with omnet++.

i want to learn how to do a multipass weld on a pipe using ansys. I want to learn how to model deposition of a multipass weld on a pipe do PWHT inoder to determine ...to learn how to do a multipass weld on a pipe using ansys. I want to learn how to model deposition of a multipass weld on a pipe do PWHT inoder to determine [login to view URL] **simulation** is 3D

I need your help to complete the following tasks:
1. Read this paper and build a JSDM in FDD Massive MIMO **simulation** platform.
2, I need you to modularize it to achieve it, including parameter input, user grouping, user scheduling, first-level precoding, second-level precoding, calculation and rate, drawing results
3, I need you to complete it as soon

Complete the **simulation** work of the paper, the indicator is the result of the recurring paper
If it is done well, you can do the follow-up work.

...(PHY) UPLINK **SIMULATION** SHOWING EFFECTS OF INCREASE IN THE MODULATION CODING SCHEME THROUGH ANALYSIS OF BER PLOTS.
I need BER plot simulations for different modulation coding schemes using Turbo coding in MIMO transmission using **MATLAB**.
I also need a paper about this code with the topic for an academic paper. In this paper the **simulation** results should

Hi, I want to simulate a DDoS attack in an SDN-based network scenario using Mininet. This is an academic project that I need for my project submission. The implementation includes an application that attacks the controller and controller mitigates those attacks using some machine learning (ML) techniques (or any other technique). There is also another aspect, the data could also be spoofed and c...

...(PHY) UPLINK **SIMULATION** SHOWING EFFECTS OF INCREASE IN THE MODULATION CODING SCHEME THROUGH ANALYSIS OF BER PLOTS.
I need BER plot simulations for different modulation coding schemes using Turbo coding in MIMO transmission using **MATLAB**.
I also need a paper about this code with the topic for an academic paper. In this paper the **simulation** results should

...(PHY) UPLINK **SIMULATION** SHOWING EFFECTS OF INCREASE IN THE MODULATION CODING SCHEME THROUGH ANALYSIS OF BER PLOTS.
I need BER plot simulations for different modulation coding schemes using Turbo coding in MIMO transmission using **MATLAB**.
I also need a paper about this code with the topic for an academic paper. In this paper the **simulation** results should

I have a list of 340 Australian Companies and require some help in finding out the STATE in which the Company headquarters is (States: NSW, WA, VIC, QLD, NT, TAS, ACT).
...this completed within the next few hours, if possible.
Please reply if interested and include your favourite colour so I know you've properly read the JD. Thanks in advance.
**Carlo**

Purpose of this project:
Create a sample data set from the perspective of an autonomous car in **simulation**.
Usually autonomous cars have lidar and camera sensors. Gazebo can simulate both of them and there is a prebuilt city, vehicles and sensors available. In order to run Gazebo in a usable way you need a _powerful_ machine.
Steps:
1. Install ROS

Looking for a programmer for running a **simulation** for sound propagation over a flat ground with a sand dune on it. The ground on either side of the dune has diferent acoustical properties. The dune is asymetric. The impedances on the ground and on the dune are all frequency-dependent. The problem is 2-dimensional. The calculations are to be preferably

LTE (PHY) UPLINK **SIMULATION** SHOWING EFFECTS OF INCREASE IN THE MODULATION CODING SCHEME THROUGH ANALYSIS OF BER PLOTS.

Using **MATLAB** code, I need to investigate the capacity of MIMO systems with different Power Azimuth Spectrum (PAS) models ,namely uniform, truncated Gaussian and truncated Laplacian , I need to evaluate the capacity for each of them.
firstly we should derives the correlation coefficient between antenna elements as a function of their spacing, the Power

Using **MATLAB** code, I need to investigate the capacity of MIMO systems with different Power Azimuth Spectrum (PAS) models ,namely uniform, truncated Gaussian and truncated Laplacian , I need to evaluate the capacity for each of them.
firstly we should derives the correlation coefficient between antenna elements as a function of their spacing, the Power

By Using Catia V5 A **simulation** of Multicylinder engine

...input voltage
- Can supply up to 3 amps or more on the load
- **Simulation** showing schematics is able to handle loads
- Must use components available from any major supplier
- Must use SMPS in design to keep heat dissipation low and increase efficiency
Expected delivery:
- Schematics
- **Simulation**
Payment terms:
- 3/4 of payment on delivery of schematics

Hey **Carlo**,
i have seen your work and I would like to get 5 T-Shirt designs from you. I m searching for a couple of people to work with long term. I need T-Shirt designs to print on T-Shirts and other things and sell them.
Are you interested to work with me?

Hi
I need some basic **simulation** done on ARENA software. We have to develop the ARENA model for single server system and run the model and obtain results report. As per the results we need to estimate the performance measures.
Will explain it further to interested applicants.
Compensation: INR 1200
Deadline: 6 hours.

need to remove heat by the water cooling jacket i have 3d design

Hi **Carlo** V., I noticed your profile and would like to offer you my project. We can discuss any details over chat.

Hi, I need a circuit **simulation** in LTSpice. The circuit is not complex. Can provide Milestones.

I want to simulate a network in cloud environment its handover authentication issue with prediction based algorithm I also want to check its security against number of attacks

need make motion of particles interacting with objects in 3ds max Particle Flow just like here [login to view URL] below is attached a video of the motion of the ground, which should be obtained from the dynamic interaction of particles and the object (spacecraft, disk)

I would like to have a **monte** **carlo** or similar **simulation** run on my spreadsheet. I am currently using Excels Rand() to randomize the results of 1000 independent events. I would like to know what results can be expected within a standard deviation. The spreadsheet I am sending has only 3 outcomes for each independent event. And I have used historical

So were trying to build an arcade console. The idea is to let it accept coins and notes so that players can play old arcade games with credits etc. just like in the old days. The program should have a menu where the player can select the games and see how many credits he has left. Inserting a coin/note should give him an amount of credits programmable behind. If we can get the plans on how to bu...

...algorithm etc across time. I will build my algorithm in C# as this later will be a part of a larger C# software suite.
Your task:
Create a solution that can run a EnergyPlus **simulation** of [login to view URL] (included in EnergyPlus installation along with [login to view URL] as weather file) and for each timestep

A simple **simulation** using COMSOL CFD to evaluate the airflow speed through a Venturi

Build and run a simple model in Arena for patients waiting in the hospital to get treatment from the doctor. An M/M/1 Single Queue, Single Server model comes to mind, but you are free to try more complex models, such as those where entities are fed through two or more different processes and servers, where some entities leave the system after initial processing, or where one of the queues implemen...

Looking for a Pro at the CAPSTONE: Capsim **Simulation**. I have the attached pictures of the rounds. Can someone assist in improving. I will grant you access so you can sign in and check. you will have my user name and password Capstone Courier and my decisions attached Please tell me if you can help me with it and if you are familiar with capsim Thanks

A simple **simulation** through ansys to evaluate the wind speed through a channel

...implement in a NetLogo **simulation**. Your **simulation** should allow for many agents to be able to service a request, while minimizing the idleness of the agents. Your **simulation** should show the length of the queues at a number of virtual servers and the number of requests each service agent has completed.
Additionally, your **simulation** should show plots of

3d **simulation** model in physics education for augmented reality

A car factory has a station that paints car parts. Write code that simulates the following single queue, single server queuing model for the factory's paint station where each part leaves the system as soon as the station is done painting it. Java or Python can be used for coding! Need the work urgently.

**simulation** of dust particles dispersion in a chamber from a source generating different particle sizes.
results in Ansys 15.0.

You should do the following: 1- Plug in the load parameters and the transmission line parameters from the document uploaded. 2- Calculate the power, voltage and current of each bus. 3- Calculate the source parameters after calculating the loads and the losses of the network.