Microcontroller based hardware project jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    6,443 microcontroller based hardware project jobs found, pricing in USD

    Looking for a hardware developer for a small device. The development will include: Schematics and Bom PCB design and Gerber files 5 complete working samples to be sent to chile. manufacture number, link on Digi-key or mouser and description for all components. The Maximum hardware size is 2cmx2cmx1cm and include a speaker, battery (70-100mah), Bluetooth

    $716 (Avg Bid)
    $716 Avg Bid
    3 bids

    ...who is an expert in EMC hardware setup/topology. We will be using a host computer/server with FC/SAS ports to connect to the DAE expansion chassis so that they are detected by the host computer/server as JBOD so that we can wipe the drives. WE are looking for someone to be able to put together a roadmap on the best hardware/cabling needed for the host

    $77 (Avg Bid)
    $77 Avg Bid
    2 bids

    We are looking for a .net developer to create to small console apps. The fist will return all hardware that has been installed on a PC, whether they are still connected or not. This will include for example a graphics or sound card was installed once but now isn’t and may have been replaced by another but it’s files/drivers/registry entries remain in

    $1132 (Avg Bid)
    $1132 Avg Bid
    39 bids
    VENDING TELEMETRY 5 days left
    VERIFIED

    A hardware module(Controller) needs to be created, which will consist of the following components: processor, internal memory, rechargeable battery with capacity 950-1100mA/h (to power the device when external supply is lost), power supply module, GSM module, SIM ВТ module that can connect to Smartphone or tablet , WiFi module for data share through

    $5851 (Avg Bid)
    $5851 Avg Bid
    15 bids

    I need to get data from 4 to 20 ma sensors and process input data using a microcontroller. After processing the data, it will be transferred to the computer via the Rs-232 protocol.

    $150 (Avg Bid)
    $150 Avg Bid
    24 bids

    IFGtech is a subsidiary of IFGworld (IFGwor...We are searching for an electrical engineer that has experience in: -Design of PCB boards -Printing of PCB boards and soldering of individual components -Design new EMG microcontroller in tandem with biomedical engineers. While hours will be flexible, the goal is to produce prototypes as fast as possible.

    $21 / hr (Avg Bid)
    $21 / hr Avg Bid
    25 bids

    1. Identify a good value and pro...The device needs to take as inputs a set of states (from a microcontroller so either as an I2C command or as a 3 digital input code, along with 3 digital inputs - alarms). The device then needs to set 11 outputs based on a 4 input truth table. 3. A basic schematic for implementing the hardware, preferably in Altium.

    $124 (Avg Bid)
    $124 Avg Bid
    16 bids

    I have a simple device that I will need to control and monitor from from a PC via its USB port. This device will have an I/O port (one for for 8-bit input and one for 8-bit output ). Also, apart from the I/O, I will need a few additional lines to work as CONTROL lines. The interface circuitry could be built using an ARM Cortex micro-controller, or use an available standard USB interface chips. In...

    $189 (Avg Bid)
    $189 Avg Bid
    32 bids

    I need to make the piezo counter display, 2 seven segments 1.8 in. t...seven segments 1.8 in. the piezo will send low voltage (1 to 5 Volt) to the microcontroller, according to of each puls the microcontroller is going to counting and display it, one reset button to reset the micro controller, I need use Arduino to program the microcontroller (Atmel).

    $122 (Avg Bid)
    $122 Avg Bid
    36 bids

    I have a unusual ADC/DAC/GPIO hybrid device connected to a Microcontroller via SPI. I need a driver for the ADC & DAC as well as digital IO from the device

    $534 (Avg Bid)
    $534 Avg Bid
    35 bids

    ...simple project but I realize that I am missing something that is not obvious to me. The attached zip file contains the Excel files as well as the htm files from the website where I found this calculation in Excel. Also the website URL. The Excel file contains a design equation allowing the output voltage adjustment for a DC/DC converter based on varying

    $179 (Avg Bid)
    $179 Avg Bid
    25 bids

    As an Electrical Hardware Engineer, you will design, develop and deploy next generation consumer hardware. You have a hardware board design background and knowledge of system architecture for mobile products. You will define board layout constraints and requirements, oversee physical engineering design layout, and work cross-functionally on system integration

    $6056 (Avg Bid)
    $6056 Avg Bid
    8 bids

    I think some wires got disconnected and my Desktoo isn't starting up. I'm not familiar with the installation and wiring of computers so I was needing some quick help. Thanks!

    $30 / hr (Avg Bid)
    $30 / hr Avg Bid
    24 bids

    Design flow for the Hardware project. Needs to be finished in an hour or so. Experience in Hardware development required.

    $37 (Avg Bid)
    $37 Avg Bid
    21 bids

    Reading Futaba TX switches state via Dragonlink using Arduino, Skills: C Programming, Arduino, Embedded Sofware, Electronics, Microcontroller

    $109 (Avg Bid)
    $109 Avg Bid
    8 bids

    We are looking to install hardware and logger software which can control embedded generators in the UK

    $50 / hr (Avg Bid)
    $50 / hr Avg Bid
    8 bids

    Applications that request hardware data should not receive real data, but those that will be emulated by your [login to view URL] real data about the hardware of the computer for application should be hidden.

    $65 (Avg Bid)
    $65 Avg Bid
    3 bids

    Hardware magazine login page needs to be more dynamic and improvements in HTML4, PHP and MYSQL. We are requiring experts with good communication skills in English. Leave your proposal indicating how you would make our site better. Thanks in advance [login to view URL]

    $377 (Avg Bid)
    $377 Avg Bid
    12 bids

    Hardware magazine login tab needs to be more dynamic and improvements in HTML4, PHP and MYSQL. We are requiring experts with good communication skills in English. Leave your proposal indicating how you would make our site better. Thanks in advance [login to view URL]

    $459 (Avg Bid)
    $459 Avg Bid
    8 bids

    I want to build a website for a Hardware shop in Pune, India . It should contain listing of all products and offers should be a main segment.

    $2 / hr (Avg Bid)
    $2 / hr Avg Bid
    25 bids

    Hardware Magazine requires changes on the administration console We require experts in css3, html and javascript. Please indicate what can you do for our site in your proposal. Thank you, [login to view URL] user: test2 password test2

    $409 (Avg Bid)
    $409 Avg Bid
    12 bids

    Hardware Magazine requires changes on the administration panel. We require experts in css3, html and javascript. Please indicate what can you do for our site in your proposal. Thank you, [login to view URL] user: test1 password test1

    $458 (Avg Bid)
    $458 Avg Bid
    18 bids

    Hardware Magazine Company requires experts for updating an institutional website. We need to polish our administration panel We need experts with excellent communication skills. Thank you, [login to view URL] user: test password: test

    $434 (Avg Bid)
    $434 Avg Bid
    22 bids

    I need you to develop some software for me. I would like this software to be developed using C in MPLAB X IDE for PIC32MX250F128B microcontroller

    $126 (Avg Bid)
    $126 Avg Bid
    9 bids

    we are looking for candidates who have experience in microcontroller , PLC programming

    $3 / hr (Avg Bid)
    $3 / hr Avg Bid
    4 bids

    I need a hardware engineer for a gesture control device. We have 1 form factor in place and want to move to the other form factor so a level of codes and sensors have been finalized. Please only apply if you are based out of bangalore and looking for a contract job.

    $382 (Avg Bid)
    $382 Avg Bid
    16 bids

    Bid only if - You are in North Bangalore - You have 5 + Years of experience in PC Hardware Support - You have experience in handling computers of different vendors like Dell / HP / Acer / Sony / Asus etc - You are willing to visit residences in North Bangalore, pick up their laptops or attend their desktops on site with your own kit and report to office

    $18 (Avg Bid)
    $18 Avg Bid
    1 bids

    ...simple project to develop hardware & firmware for a triac based starting ramp controller. This project will provide basic hardware elements as a starting point. The Developer will have input into final hardware layout including the selection of Microcontroller to aid swift project completion. Project Condition 1. LOW COST/SIM...

    $266 (Avg Bid)
    $266 Avg Bid
    27 bids

    Need remote control and remote HD video streaming over wifi from drone. Would like to use Arduino type microcontroller board and/or Single Board Computer to control drone motors and to capture HD video via mini-HDMI camera output and have a media server like VLC stream the hdmi input over Gigabit ethernet to wireless transceiver and finally to an 802

    $242 (Avg Bid)
    $242 Avg Bid
    18 bids

    I have Windows 2008R2 Domain controller VM that I want to move to a new physical server with fresh windows 2008R2 installed. It has to be done the way that the IP remains the same, and domain member computers won't need to be re-added to the domain ( After all done, old domain controller goes down, the new one comes up and nothing else needs to be done on the domain members)

    $69 (Avg Bid)
    $69 Avg Bid
    40 bids

    Need to port FreeRTOS for RH850/P1H-C Microcontroller. need some basic changes which will make the RTOS compatible with RH850. you do not need to write any drivers. you just need to make some changes specific to the microcontroller. let me know if any one is interested to work on this.

    $14 / hr (Avg Bid)
    $14 / hr Avg Bid
    9 bids

    I recently developed a microcontroller-based lighting controller for an art project with a local artist. It controls 3 x 3-colour LED strips. I also wrote a PC program in JAVA to define how the lights change/fade over time. The PC program has a similar UI to Audacity in that there is a timeline to represent each of the channels (the LED strips).

    $1634 (Avg Bid)
    $1634 Avg Bid
    22 bids

    ...can be found here: [login to view URL] I need the patents filtered so that the specification includes microprocessor cpu microcontroller or "micro controller". Also the assignee name needs to match the inventor [login to view URL] the inventor country needs to be usa I need to be able to run the code myself on a weekly

    $394 (Avg Bid)
    $394 Avg Bid
    9 bids

    We want a person which have a great knowledge about Bluetooth 4.0/4.2/5.0 modules and the micro-controller. The person also must resides in Jaipur, Rajasthan.

    $15 (Avg Bid)
    $15 Avg Bid
    3 bids

    we have shop at rassi market bada, Laskar gwalior.. Now we are developed lab for research and development in mobile software and hardware at star plaza Roxy road [login to view URL] we want to hire some staff for work with us.

    $260 (Avg Bid)
    $260 Avg Bid
    4 bids

    ...by Commodore. I have recreated the Amiga 500 keyboard and want to replace the old controller(Commodore CSG 6570-036 MCU with a newer PIC chip) using a PIC18F45K50T-I/PT microcontroller as a replacement and hopefully be able to incorporate the extra logic circuit into the new MCU. I have the original schematic and have created the new sch and .brd file

    $86 (Avg Bid)
    $86 Avg Bid
    7 bids

    ...compiler and MPLABX environment. This could be a port of the Arduino LCD library 'U8g2'. See ttps://[login to view URL] There are details on how to port to other microcontroller platforms. See [login to view URL] Or you could write a custom library, or port another open source library. The result

    $220 (Avg Bid)
    $220 Avg Bid
    10 bids

    we need a code in C, it should be written in Keil compiler with STM32 microcontroller and CMSIS libraries. sample devices for this purpose are JUMO ITRON seies in industry.

    $2281 (Avg Bid)
    $2281 Avg Bid
    31 bids

    Design and develop an android app to com...to communicate(via Bluetooth) with our custom hardware device. The app needs to respond to an SOS button pressed on the device and share location of the device with emergency contacts. Also, OTP based authentication needs to be incorporated to enable only authorised users to connect with the hardware devce.

    $130 (Avg Bid)
    $130 Avg Bid
    3 bids

    ####Only experience programmer will be approved#### The board will be used in cars, has dual CAN interface, CAN1= c...between CAN1 and CAN2 (normal mode). 2- Modify specific data in some messages going to CAN2 while pre-defined data received (filtering mode). 3- Fail-safe mechanism for both hardware and software failure. 4- Easy upgrade for future use

    $184 (Avg Bid)
    $184 Avg Bid
    16 bids

    ...of SIM cards, which can be used by a gsm gateway. - Gsm gateway : An enclosure containing one ore more gsm/3g/4g modems. What I'm looking for in terms of deliverable : - Hardware: everything needed to build the sim card emulator on the ISO/IEC 7816-3 layer + interfacing it via internet to a management system comprised of one or more sim bank - Software:

    $731 (Avg Bid)
    Featured
    $731 Avg Bid
    6 bids

    I need a software Video specialist...so you can setup the software and see if the CARDS are recognized in OCTANE and the performance benefits in rendering. Cinema4d with OCTANE plugin on a hardware.. This is NOT A RENDERING project.. or a VIDEO graphy.. This is to BENCHMARK rendering before a renderfarm commit. Reply with SKYPE This is a small job

    $131 (Avg Bid)
    $131 Avg Bid
    5 bids

    Build a website for a hardware magazine [login to view URL] Improve oldfashioned website with HTML5 and CSS3 Regards

    $453 (Avg Bid)
    $453 Avg Bid
    58 bids

    ...Electronics Radio Circuits designing and Radio Frequency transmitters and receiver data communication experience required, preferably in Meteor burst technology. FPGA, Microcontroller interfacing, Motorola VHF transceiver experience preferred. The main Aim is Data communication through wireless communication link x.25. VHF Meteor burst transmitter &

    $5742 (Avg Bid)
    $5742 Avg Bid
    11 bids

    I have a double layered PCB ( top and Bottom, no more layers )with mainly 1 ARM Microcontroller, one 24bit ADC and a communication chip on there. I need you to build the autodes eagle schematic file for me. I can not provide the pcb itself but detailed photos in high resolutions of both sides. I will deliver a sample photo upon request.

    $154 (Avg Bid)
    $154 Avg Bid
    47 bids

    We have to test 30 devic...then install them at various locations in Himachal. We need a street smart guy who can help us during the process. The person must be based out of Delhi/Gurgaon and be ready to come to our premises for testing the hardware. He must be comfortable with very basic electronics assembly and should have a strong bias for action.

    $144 (Avg Bid)
    Local
    $144 Avg Bid
    18 bids

    I need programming firmware of STM32F103 Microcontroller. I have customized PCB. I have received the components and the PCB. 1) I will assemble the different parts of the circuit and test their devices with very simple programs. Receive a serial port frames Send a serial port frames Receive a canbus frames Send a canbus frames 2) I assemble the

    $106 (Avg Bid)
    $106 Avg Bid
    20 bids

    We are looking for an hardware developer. The development will include: Hardware schematics like Bom and gerber files Hardware development 5 samples sent to chile of with a list of components The hardware size is 2cmx2cmx1cm and include a speaker, battery (70-100mah), clock, bluetooth 4.2, small memory card, on/off button, charger space. 1 month

    $1164 (Avg Bid)
    $1164 Avg Bid
    36 bids

    Hello freelancer I am looking for someone, in order to design a project by using Proteus to simulate PIC18F4550 USB-HID Device. in which the microcontroller generated "text or code" and then read this "text or code" by C# Form to show as a label.

    $41 (Avg Bid)
    $41 Avg Bid
    13 bids

    I am owner Of Arista Hardware and I need a better logo.

    $19 (Avg Bid)
    $19 Avg Bid
    7 bids