Microcontroller based ptz project jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    4,304 microcontroller based ptz project jobs found, pricing in USD

    The purpose of this project is to use a temperature sensor, along with a potentiometer, to convert analog data to corresponding digital values, then to process and format the digital information, then display the information in a Terminal window using UART via RS-232 usb cable from board. The microcontroller is a PIC24FJ64GA102. There is already given

    $49 (Avg Bid)
    $49 Avg Bid
    6 bids

    ...someone who can make a FFT function for an accelerometer vibration monitoring application. I have developed a sensor board that has ST LIS2DH12 and Microchip PIC 18F25K20 microcontroller running at 16MHz from it's internal oscillator. The code for the processor is done using Proton BASIC language. How the code should function: A 256 x 16bit signed word

    $600 (Avg Bid)
    $600 Avg Bid
    6 bids

    We need to make the software with a PIC 16f1933 micro controller for a 3 phase power and energy meter with the IC : ADE7758. The AD7758 should measure the power, energy, voltage, current and temperature variables and send to PIC micro controller via SPI, after this , the PIC micro controller should send the information with a proprietary protocol trough ESP8266 to internet fix IP. I have the hard...

    $433 (Avg Bid)
    $433 Avg Bid
    6 bids

    I need basic firmware to be designed for my microcontroller ESP32 with Arduino IDE... Functionalities needed: 1. Remote Application Update 2. IOT Integration with Alexa/AWS and Google Home 3. ESP32 to ESP32 communication master slave for multiple room controllers 4. Single Master ESP32 will communicate to internet and all slave will communicate to master

    $423 (Avg Bid)
    $423 Avg Bid
    14 bids

    Multi threading program required for microcontroller c1294 device for integration with existing program.

    $45 (Avg Bid)
    $45 Avg Bid
    4 bids
    PTZ Camera 4 days left
    VERIFIED

    monitor and control PTZ camera which supports onvif protocol. I need a c# web application where i can stream ptz camera and control it, move it right, left, up, down, zoomin and zoom out

    $428 (Avg Bid)
    $428 Avg Bid
    9 bids

    The main goal of unobtrusive sensing is to enable continuous monitoring of the human body's physical activities and behaviours as well as during the subject's daily activities. The measured vital signs include body temperature, ECG and oxygen saturation (SpO2). I'm using a TMP36 for the temperature sensor and I've done the code in Python, which is to be used on a Raspberry Pi ...

    $160 (Avg Bid)
    $160 Avg Bid
    5 bids

    an arduino stepper motor control to drive the hands replacing the ordinary one

    $125 (Avg Bid)
    $125 Avg Bid
    18 bids
    PIC & ESP Programmer 4 days left
    VERIFIED

    I'm Bhuvana,...Solutions Pvt. Ltd. For a project now, the PCBs are ready. We need someone to program our requirements. The project is to transmit data from sensors through PIC18F46K22 Microcontroller and MikroE 2542 WiFi ESP Click to a PC, over wifi. This is a very urgent requirement. So, we need someone who is very confident and is based in Chennai.

    $133 (Avg Bid)
    $133 Avg Bid
    5 bids

    ...electronic TFT control interface based on existing TFT product but adding some new features. The purpose of this document is to define the requirements for a new firmware development based on Microchip MPLAB Harmony platform. 2. TFT CONTROLLER HARDWARE TFT controller is an embedded hardware design based on PIC32 microcontroller. This are the main elements

    $8895 (Avg Bid)
    $8895 Avg Bid
    34 bids

    Simultaneous playing of MP3 and reading coordinates file from SD (VS1053). MP3 playing issue due to huge quantity of coordinates reading. Working via TeamViewer, due to specific microcontroller (Arduino compatible 3 cores processor). More details will be provided by chat.

    $83 (Avg Bid)
    $83 Avg Bid
    5 bids

    design a microcontroller based blood pressure system with gui

    $64 (Avg Bid)
    $64 Avg Bid
    4 bids

    ...valued the most. Skills and Expertise: - Hands-on experience in IoT, Embedded Firmware / hardware Development. - Taking products from PoCs to Industrialization. - Microcontroller based hardware design and development along with embedded programming. - Good understanding of Multi Layer PCB Design and full hardware product life cycle In-depth knowledge

    $1234 (Avg Bid)
    $1234 Avg Bid
    13 bids

    ...street-smartness a.k.a sense of“jugaad” will be valued the most. Skills and Expertise: - Hands-on experience in IoT, Embedded Firmware / hardware Development. - Microcontroller based hardware design and development along with embedded programming. - Good understanding of Multi Layer PCB Design and full hardware product life cycle In-depth knowledge

    $13 / hr (Avg Bid)
    $13 / hr Avg Bid
    14 bids

    Need the C code of the driver of I2C for Atmel microcontroller. I have uploaded a application note of atmel/microchip you just need to implement it in keiluvision.

    $59 (Avg Bid)
    $59 Avg Bid
    10 bids

    my requirements as shown below [login to view URL] workstation software 3. Application of a ready-made microcontroller written in Python or java 4. The high-capacity computer must operate 4 operating systems together with the Windows host system. 5. Operating system operated by the controller. 6. Operating system on which the SDN system operates 7. Mininet

    $452 (Avg Bid)
    $452 Avg Bid
    4 bids

    my requirements as shown below [login to view URL] workstation software 3. Application of a ready-made microcontroller written in Python or java 4. The high-capacity computer must operate 4 operating systems together with the Windows host system. 5. Operating system operated by the controller. 6. Operating system on which the SDN system operates 7. Mininet

    $213 (Avg Bid)
    $213 Avg Bid
    5 bids

    ...choosen component, if it is good for this application [login to view URL] [login to view URL]:g:vYEAAOSwuQhcTY0D&frcectupt=true [login to view URL]

    $174 (Avg Bid)
    $174 Avg Bid
    14 bids

    [login to view URL] This project has complete code and hardware solutions, I want to do it in a much simpler way, using cheaper hardware, such as arduino cc1101 433Mhz RF,I need a Arduino, Electronics, Microcontroller expert for my current project. If you have knowledge please bid.

    $293 (Avg Bid)
    $293 Avg Bid
    13 bids

    I need a Linux script to control a PTZ camera which is streaming using mjpg-streamer. Streaming is working but I need to get PTZ going. The camera is a QuickCam Orbit AF with pan tilt. Once the job is complete, you must provide a list of all packages required and zip up the final build code so that I can make changes if needed. Show me what you

    $50 (Avg Bid)
    $50 Avg Bid
    1 bids

    the project : The aim of the project is for you to create a small, hand-held, battery-powered IoT device. This will entail interfacing a microcontroller with a sensor and a display and any LEDs, buttons, buzzers etc. as required. You will have a choice of sensor which to use. After that the specific application of the project together with the features

    $131 (Avg Bid)
    $131 Avg Bid
    5 bids

    I have an embedded AtMega328 based project with a ready schematic, that needs to be converted to a well-designed PCB layout. Work to be done includes placing and routing the main components (microcontroller, BLE module , RFID module) as well as the design of a 13.56MHz antenna for NFC.

    $350 (Avg Bid)
    $350 Avg Bid
    39 bids

    he design and implementation of an automated liquid observation and controlling method utilizing an affordable liquid flow sensor and the microcontroller are presented here which has the ability to assist the health care provider to control the saline circulation rate using Matrix keypad or Android phone. The Arduino Mega (2560) platform has been used

    $151 (Avg Bid)
    $151 Avg Bid
    6 bids

    ...com/sites/default/files/NEO-LEA-M8T-FW3_DataSheet_%28UBX-15025193%[login to view URL] on this board: [login to view URL] I need to add a bluetooth module with microcontroller and configure/program it (I am open to suggestions but the ESP32 seems suitable, for example this one: [login to view URL]

    $12 / hr (Avg Bid)
    $12 / hr Avg Bid
    18 bids

    INPUT: ______ multiple cctalk coinhoppers, cctalk coinreader & ccnet banknote acceptor YOUR JOB: _________ Create professional software on microcontroller to create a flexible money change machine using the 3 different devices with LCD screen for the enduser. Flexible with configuration file and LCD screen. (also used to program the system) Create

    $1024 (Avg Bid)
    $1024 Avg Bid
    12 bids

    Hi. I am trying to build a PCB. It will have the following sensors. Fingerprint sensor: Gas sensor : Micro-controller: Charging controller : It will also have 2 leds ( Green and Amber) for indicating power on and charging. The circuit will also have a master power switch for powering the circuit and a fire switch. The circuit will be powered by a 18650 LiPo battery. The micro-controller ...

    $192 (Avg Bid)
    $192 Avg Bid
    18 bids

    ...sensor ([login to view URL] ) should be realized. For this purpose, the Basys 3 FPGA board should be used. Furthermore, an 8051 microcontroller IP core([login to view URL]) is to be used, which takes over the control. The result of the brightness should be displayed on 7-segment

    $223 (Avg Bid)
    $223 Avg Bid
    6 bids

    I have an ATmega microntroller (same as uno) reading a voltage divider connected to a 9v battery. I want to send that data to another ATmega microcontroller using esp8266-01 and have it displayed to a 16x2 lcd. I have designed circuit schematics already

    $136 (Avg Bid)
    $136 Avg Bid
    42 bids

    Project Overview: We are working on a HS Microphone driver for the STM32F7 microcontroller. We have a base project that functions periodically that needs to be debugged so that the microphone works 100% of the time. More Details: For a little background, The original project was ported from the STM32Cube Expansion MEMs MIC 1 project and I have modified

    $233 (Avg Bid)
    $233 Avg Bid
    8 bids

    Looking for an electronics engineer having good experience with STM32F7 microcontroller. I will provide the details of work in chat

    $232 (Avg Bid)
    $232 Avg Bid
    14 bids

    I am trying to set ATTiny214 into power down sleep mode and wake it up using PIT (Periodic Interrupt Timer). I want the program to turn on a LED and then the Microcontroller sleeps for 8hrs, then wakes up and turns Off the LED Afro 16hrs.

    $134 (Avg Bid)
    $134 Avg Bid
    4 bids

    ...distance sensor ( [login to view URL] ) should be realized. For this purpose, the Basys 3 FPGA board should be used. Furthermore, an 8051 microcontroller IP core ([login to view URL]) is to be used, which takes over the control. The result of the distance measurement should be displayed

    $272 (Avg Bid)
    $272 Avg Bid
    2 bids

    ...development Hands on experience in J9391 Proficient in embedded C programming in automotive domain Experience in AUTOSAR based software development. Good knowledge on Software Debugging & Testing methodology Good knowledge on microcontroller architecture, memory layouts, device drivers, compiler & debuggers Knowledge of diagnostic/communication stack/MCAL/NVRAM/Bootloader

    $2270 (Avg Bid)
    $2270 Avg Bid
    2 bids

    Need a tutor for basic project; using LabVIEW to communicate microcontroller in PCB (Printing Circuit Board).

    $2096 (Avg Bid)
    $2096 Avg Bid
    26 bids

    The scope of the project is to develop firmware for a PIC microcontroller based pcb. There are 11 opto couplers on the board. The optocouplers takes signals from the 7 segment LCD that I am running using an arduino and 7 segment display. The cables are looped from the 7 segment LCD and are connected to the pitch screws on the card. When the opto

    $152 (Avg Bid)
    $152 Avg Bid
    5 bids

    The project is to develop a bootloader (and custom firmware update software) for both the ATMEL ATSAME70J19 and the AT90CAN32 microcontroller, which will allow for reprogramming the boards via the CAN bus. The CAN bus will have multiple of these microcontrollers, so they will need to be addressable. There are three parts of this project: 1. Write

    $4301 (Avg Bid)
    $4301 Avg Bid
    16 bids

    The project is to develop a bootloader for both the ATMEL ATSAME70J19 and the AT90CAN32 microcontroller, which will allow for reprogramming the boards via the CAN bus. The CAN bus will have multiple of these microcontrollers, so they will need to be addressable. There are three parts of this project: 1. Write a bootloader for the ATSAME70J19 microcontroller

    $1321 (Avg Bid)
    $1321 Avg Bid
    24 bids

    ...Display :-- The project consisted of a microcontroller interfaced with mssd on a 40x40 mm^2 single layer pcb designed by me using altium designer. The objective was to display the digital values corresponding to an analog input fed to the controller through a voltage follower. 2. Thermal Printer :-- The project consisted of a

    $3 / hr (Avg Bid)
    $3 / hr Avg Bid
    1 bids

    ...Display :-- The project consisted of a microcontroller interfaced with mssd on a 40x40 mm^2 single layer pcb designed by me using altium designer. The objective was to display the digital values corresponding to an analog input fed to the controller through a voltage follower. 2. Thermal Printer :-- The project consisted of a

    $3 / hr (Avg Bid)
    $3 / hr Avg Bid
    1 bids

    Hi G-Bird M., I noticed your profile and would like to offer you my project. We can discuss any details over chat. am looking an developer who need to develop Bacnet MSTP to Bacnet IP router,Strong Knowledge on Embedded and Firmware development,Microcontroller, I can share sample Source code which can help you for development if you are interested

    $493 (Avg Bid)
    $493 Avg Bid
    1 bids

    Hi Harish H., I noticed your profile and would like to offer you my project. We can discuss any details over chat. I am looking an developer who need to develop Bacnet MSTP to Bacnet IP router,Strong Knowledge on Embedded and Firmware development,Microcontroller, I can share sample Source code which can help you for development if you are interested

    $493 (Avg Bid)
    $493 Avg Bid
    1 bids

    Hi Sanyukta K., I noticed your profile and would like to offer you my project. We can discuss any details over chat. am looking an developer who need to develop Bacnet MSTP to Bacnet IP router,Strong Knowledge on Embedded and Firmware development,Microcontroller, I can share sample Source code which can help you for development if you are interested

    $493 (Avg Bid)
    $493 Avg Bid
    1 bids

    Hi Anh N., I noticed your profile and would like to offer you my project. We can discuss any details over chat. I am looking an developer who need to develop Bacnet MSTP to Bacnet IP router,Strong Knowledge on Embedded and Firmware development,Microcontroller, I can share sample Source code which can help you for development if you are interested please

    $493 (Avg Bid)
    $493 Avg Bid
    1 bids

    ...to offer you my project. We can discuss any details over chat. Hi Rohan Kanaiyalal L., I noticed your profile and would like to offer you my project. We can discuss any details over chat. I am looking an developer who need to develop Bacnet MSTP to Bacnet IP router,Strong Knowledge on Embedded and Firmware development,Microcontroller, I can share sample

    $494 (Avg Bid)
    $494 Avg Bid
    1 bids

    ...you my project. We can discuss any details over chat. I am looking an developer who need to develop Bacnet MSTP to Bacnet IP router,Strong Knowledge on Embedded and Firmware development,Microcontroller, I can share sample Source code which can help you for development if you are interested please revert back to me. Price can be Freezed based on final

    $494 (Avg Bid)
    $494 Avg Bid
    1 bids

    My name is Preetam Singh Rathore. I'm designing a product. And for that purpose I need an android app which can transmit as well as receive the data from a BLE microcontroller.

    $172 (Avg Bid)
    $172 Avg Bid
    6 bids

    There is a circuit, which is generally a speaker one and an inverter one which composed of the microcontroller and few IC's. I have the code and circuit, you just need to simulate and make some changes if needed for the exact output.

    $19 (Avg Bid)
    $19 Avg Bid
    10 bids

    ...sensor ([login to view URL] ) should be realized. For this purpose, the Basys 3 FPGA board should be used. Furthermore, an 8051 microcontroller IP core([login to view URL]) is to be used, which takes over the control. The result of the brightness should be displayed on 7-segment

    $180 (Avg Bid)
    $180 Avg Bid
    9 bids

    The project is to develop a code for the DS1337 clock and drive 12 individually addressable LEDs to show the time. LED driver is the TLC59711 IC. LEDs are arranged in a circle, like the numbers are on an analog clock. Displayed should be hour, minutes and seconds. There are limitations on what can be displayed, so PWM should be used to help convey

    $207 (Avg Bid)
    $207 Avg Bid
    13 bids
    $26 / hr Avg Bid
    15 bids