Microprocessor programming jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    766 microprocessor programming jobs found, pricing in USD
    DJI TB55 Battery Communication 18 hours left
    VERIFIED

    ...another device for both charging and discharging other than the drone or chargers designed by DJI). My device will use either the Raspberry Pi 3 b+ or the Arduino ESP32 microprocessor so communication must match / be capable by these two devices. Quote must include all time and materials entirely. (If you need to buy batteries, figure that into your

    $1669 (Avg Bid)
    $1669 Avg Bid
    14 bids

    For our Business, we want to hire a person to write microprocessor code (specially for atmega chips) and who have knowledge about basic electronic circuits.

    $96 (Avg Bid)
    $96 Avg Bid
    7 bids

    The components has been designed to work with 68000 microprocessor or 80C188, it's needed to design a PCB and base programming to connect with a raspberry board (maybe SPI or I2C communication). There are 2 components that should work together (documentation of components will be provided).

    $1437 (Avg Bid)
    $1437 Avg Bid
    27 bids

    We are looking for something to help us with an ECU programming Project. Need experience with the following: C++ Can Bus Communication Microprocessor Read and Write Debugging Software Development Please contact us if you have experience in the field of work.

    $20 / hr (Avg Bid)
    $20 / hr Avg Bid
    12 bids

    ...4. Separate cost for Working Prototype 5. Gerber files for production of PCB 6. Complete BOM, all commercial parts 7. Firm ware 8. Should not use the same main chip or microprocessor as FIXD 9. Software for communicating all vehicle parameters to a Cell Phone as a table to be sent to our server. Nothing else in that software. Information should be

    $3779 (Avg Bid)
    $3779 Avg Bid
    21 bids

    ...must be non-invasive ie not require rewiring or splitting the positive from ground wires and passing through an electromagnet coil etc. This is for use with an Arduino microprocessor, so either a digital I/O of on/off or some sort of current draw analogue reading is needed so the software can determine the definition of "on" and "off". I purchased

    $66 (Avg Bid)
    $66 Avg Bid
    12 bids

    ...(see powerpoint file), and 5 ultrasonic sensors (see powerpoint file). I also need to buy the cords/cables that come with them... (They will all be wired to a central microprocessor to analyze their outputs) Give me cost each, cost total, website or address, and so on. Give me as much information about ordering them as you can... --------- Part

    $140 (Avg Bid)
    $140 Avg Bid
    5 bids

    Completion of R&D of Audio playback device. The project is 95% complete but needs additional coding for late addition components. The circuit boards are made. The original code files are available to the new designer to get familiar with the code prior to altering for the added end user functions.

    $12 / hr (Avg Bid)
    $12 / hr Avg Bid
    3 bids

    ...At: • Work experience: 1 - 5 years • Experience in software design and development using in OOD, TDD, ATDD • Good at C / C ++ Python programming languages for embedded systems software • Good background with Microprocessor and Microcontrollers (ARM, PIC, 8051, etc.) and development tools (GNU GCC, IAR, ICE, etc.). • Experience with Embedded OS (Linux,

    $12 / hr (Avg Bid)
    $12 / hr Avg Bid
    23 bids

    I'll give details to interested candidates I use Amtel7 to check the code. Regards

    $28 (Avg Bid)
    $28 Avg Bid
    11 bids

    ...(see powerpoint file), and 5 ultrasonic sensors (see powerpoint file). I also need to buy the cords/cables that come with them... (They will all be wired to a central microprocessor to analyze their outputs) Give me cost each, cost total, website or address, and so on. Give me as much information about ordering them as you can... --------- Part

    $198 (Avg Bid)
    $198 Avg Bid
    2 bids

    Referring to computer architecture, write on the Structure of the Pentium

    $41 (Avg Bid)
    $41 Avg Bid
    11 bids

    PCB, schematics, design files, Atmega (328 if possible) and ac...source of 5v or 3.3v. If possible, the final device should not require to be positioned in a predefined way (alignment). "The detection output shoud be available using the microprocessor serial port (TTL TX). If any configuration is needed we can use the same Serial (TTL RX) to config.

    $1128 (Avg Bid)
    $1128 Avg Bid
    56 bids

    This project involves close understanding of 4 electronics parts - CMOS camera OV7670, STM32 microprocessor, Battery charging module, Bluetooth AT-09. We only have circuit diagrams for individual components but we need Gerber file to place online order for final board. You will have to do: 1. Review components we require on the board and draw a circuit

    $222 (Avg Bid)
    $222 Avg Bid
    24 bids

    ...protocol like MQTT. 8. Design & Development of applications to manipulate the project according to client requirements. 9. Excellent knowledge on Micro controller and Microprocessor. 10. Knowledge of embedded C/C++ and Python. 11. Strong experience on Core Python & Scripting, Linux firmware and driver designing is desirable. Required Experience

    $337 (Avg Bid)
    $337 Avg Bid
    14 bids

    Want a chip that will receive regular signal from a small microphone, learn the time spacing of the signal, activate a small servo motor if the signal not received at the expected time. For example, to activate a valve that occasionaly fails to open under fluid pressure

    $350 (Avg Bid)
    $350 Avg Bid
    19 bids

    ...need to parse weekly can be found here: [login to view URL] I need the patents filtered so that the specification includes microprocessor cpu microcontroller or "micro controller". Also the assignee name needs to match the inventor [login to view URL] the inventor country needs to be usa I need to be able to run the

    $394 (Avg Bid)
    $394 Avg Bid
    9 bids

    Our Company name is mieuPro Systems. (mieuPro means microprocessor chip). Logo must contain microprocessor chip & circuit lines

    $17 (Avg Bid)
    $17 Avg Bid
    37 bids

    We would like to get the suitable ppl to work on this project, who should proficiency in SIM800, single chip microprocessor, fully understanding the UART principles.

    $424 (Avg Bid)
    $424 Avg Bid
    14 bids

    I need code written for [login to view URL] using scrapy. The code will scrape the [login to view URL] for patents and patent applications whose description includes microprocessor or microcontroller or cpu or both micro and controller. I want the code to search individual application or issue dates on a day by day basis. All patent information should be scrapped

    $159 (Avg Bid)
    $159 Avg Bid
    4 bids

    ...include quantum chemistry, quantum optics, quantum computing, superconducting magnets, light-emitting diodes, and the laser, the transistor and semiconductors such as the microprocessor, medical and research imaging such as magnetic resonance imaging and electron microscopy. Explanations for many biological and physical phenomena are rooted in the nature

    $10 / hr (Avg Bid)
    $10 / hr Avg Bid
    9 bids

    ...functionality I need. but it would be great if you can suggest me hardware that fits into the budget and with smaller microcontroller/microprocessor. it is not required to use arduino or raspberry pi, any microcontroller or microprocessor that fits perfect for this project would do. All it have to do is to play videos in fullscreen from inserted SD card one by

    $97 (Avg Bid)
    $97 Avg Bid
    20 bids

    Small tasknon disgital system and microprocessor Budget 30-50 usd Deadline 1 day

    $92 (Avg Bid)
    $92 Avg Bid
    7 bids

    ...phase-to-phase voltage. Terminal box should be located closely (for input and output connections) Earth connection Cooler design and fan design for IPM and diodes TMS320 series microprocessor can be better for me 145mm widht x 130mm Height x 145mm Depth (maximum dimensions, device should be equal or smaller) One input for changing motor’s rotation Safety stop

    $2469 (Avg Bid)
    $2469 Avg Bid
    22 bids

    Use inexpensive microprocessor from Rockchip, Allwinner [login to view URL] should be Android. Decode 4K video, microphone input. No AI, neural network or image recognition required. Be able to drive dual touch screens (1080P each). Use existing SBC reference design from microprocessor company. In reality just the layout needs to be customized, the reference schematics

    $701 (Avg Bid)
    $701 Avg Bid
    11 bids

    ...mentioned departments above. • Professors/Assistant Prof working in Computer architecture (if they have someone working in this area) • Professors Assistant Prof working Microprocessor Design (if they have someone working in this area) • Professors Assistant Prof working VLSI Design (if they have someone working in this area) • Professor Assistant Prof

    $129 (Avg Bid)
    $129 Avg Bid
    46 bids

    ...Azure. We are behind in programming and need this and some additional help on other projects that relate to this if it works out well. We are in process of converting to TCPIP with a new modem and need the existing socket modified to handle both TCPIP and the existing UDP. The socket interacts with the field microprocessor and reads/writes data to

    $479 (Avg Bid)
    $479 Avg Bid
    11 bids

    We are a microprocessor, sensors and actuators eshop for Do-It-Yourself and IoT communities. The shop is named uProc what means u (micro symbol) + proc (processor) = MicroProcessor Our temporary website is [login to view URL]

    $79 (Avg Bid)
    $79 Avg Bid
    63 bids

    please check the files attached to understand the lab I need u to fill page 4 and 5 in the lab file and send me the file you used in the program to run it the ​first file is the lab file the ​second file has some of the codes u need for this lab

    $26 (Avg Bid)
    $26 Avg Bid
    8 bids

    I am developing a few s...may also be need to add a graph to show the temperature over the last 24 hours, a gauge to monitor soil moisture and the air humidity. Given the code will reside on a microprocessor it needs to be small and robust as well as be able to operate with various browsers is possible however chrome is our primary targeted browser.

    $107 (Avg Bid)
    $107 Avg Bid
    5 bids

    Software Engineer with Experience in C++, Data login, A/D Converters, DAC , HMI, LAN data collection , hardware knowledge deisred enougj to gnerate schematic vga, rs232,, Microprocessor ARM, Raspberry Pi or Beagle black experience a plus.

    $1452 (Avg Bid)
    $1452 Avg Bid
    13 bids

    Design and build functioning prototype microprocessor system using: The internet, laptop or personal computer, Arduino UNO, WIFI esp8266 module, 2 stepper motor drivers, digital power supply and associated breadboard jumpers and accessories. Purpose: To provide the means for smartphone iOS or Android user input via the WIFI module and the internet to

    $599 (Avg Bid)
    $599 Avg Bid
    25 bids

    ...sor interface circuit incorporating a microprocessor to provide a 20 second delay between sensor trigger and solenoid actuation; and to turn off the solenoid when the sensor is re­triggered or a period of 30 seconds has&nbs...

    $204 (Avg Bid)
    $204 Avg Bid
    43 bids

    We are building a project that requires bluetooth integration of the hardware with the smartphone application. We require a bluetooth HID that minimize...is play music on a headset attached to the HID, and send and receive text data from the smartphone application. It should also be able to serially communicate with the microprocessor of the hardware.

    $432 (Avg Bid)
    $432 Avg Bid
    7 bids

    Looking complete PCB development inclusive of simulation, source code, microprocessor programming, and Bluetooth App, schematics and Gerber file development and actual working pcb prototype along with aux board that will monitor input of up to 10 - 12v AGM batteries in series / 20 with aux board coupled to second battery bank which is parallel with

    $548 (Avg Bid)
    $548 Avg Bid
    4 bids

    ...wireless ESP8266 or ESP8285 antenna chip can be used. (It can also be in the form of a ready-made module.) - Sim card and internet connection. - The stm32 series will use a microprocessor. (low power) There will be a 16X4 LCD screen. Minimum 30A relay to be used for control. (or contactor) With the power input, the device will both work and provide electricity

    $216 (Avg Bid)
    $216 Avg Bid
    9 bids

    ...2 ledstrip SK6812 (similar WS2812) with individually adressable leds. Ledstrip can be RGB, RGBW or WWA (wharm white and amber) Length 1 m (144 leds) or custom specified Microprocessor control board: Teensy LC or alternative Resistive touch strip with two channels, connected to analog inputs of Teensy. Touch strip has same length as ledstrip. At each

    $200 (Avg Bid)
    $200 Avg Bid
    11 bids

    work with microsprocessor and work with APIand web server

    $1545 (Avg Bid)
    $1545 Avg Bid
    4 bids

    I have a new, very small project. It's for a simple, tech-ish looking web page that describes a microprocessor-based home automation project I'm working on. It should be designed so future projects can be added in the future. I still have to update the text/copy a bit, but I'd leave the design to your discretion after we've decided on the basics

    $164 (Avg Bid)
    $164 Avg Bid
    42 bids

    Looking for a embedded Linux developer...developing a driver for an iMX6 module on a custom board for capturing 16-bit greyscale video supplied by an FPGA through the camera sensor interface on the IPU of the microprocessor. Must have previous experience with IPU drivers and camera interfacing, as well as driver development for embedded Linux systems.

    $28 / hr (Avg Bid)
    $28 / hr Avg Bid
    6 bids

    I have a board that I designed using an Atxmega128A1U microprocessor from Atmel. I want to use a remote control that uses a PT2264 chip to encode an address and a 4-bit data code referencing which button on the remote was pressed. I want a driver/code that I can add to my design that implements the decoder circuit for the PT2264 chip. The code should

    $151 (Avg Bid)
    $151 Avg Bid
    5 bids

    Need to develop a prototype of biomedical device to measure vitals such as blood pressure, pulse, SpO2 and more. WiFi and Ble enabled, battery powered and should h...preferred. You will need to provide us with detailed schematic, PCB design layout, BOM of device, firmware and its source code, detailed instruction to flash firmware onto microprocessor.

    $2008 (Avg Bid)
    $2008 Avg Bid
    12 bids

    ...PCB. This is my current setup: - MX25R1635FZUIH0 SPI flash installed on custom PCB configured as shown on the attached schematic, pins 1, 2, 5 & 6 connect directly to a microprocessor - FTDI MPSSE cable C232HM-DDHSL-0 - FTDI app FT_Prog installed on a Windows 7, running as a Parallels VM on the MBP - latest D2XX drivers (2.12.28) loaded on the Win7

    $7 - $22
    $7 - $22
    0 bids

    We Need "MAME ROM" Expert for our pro...Expert for our project. Bidders have knowledge about "MAME Emulator" And "ROM", Bidders also expert in C,C++ and Hex Code. We have some ROM files which is RUN on 6502 microprocessor board now we want to RUN that files on "MAME Emulator" so person have proper knowledge about how "MAME Emulator" and &q...

    $25 (Avg Bid)
    $25 Avg Bid
    1 bids

    I am seeking someone to first layout the PCb and create the Gerber files for producing the board. Later I shall need someone who can write the code for the ATiny microprocessor. It is a very smple program.

    $455 (Avg Bid)
    $455 Avg Bid
    43 bids

    I am replacing USB cable with a wi-fi module for transfer data from a sensor that has an embedded Microprocessor. It will communicate USB-CDC high speed to a wi-fi module that will transmit the data stream to a PC using Wi-fi Direct; Therefore many functions that relate to Wi-fi communication to the Web, Networks etc. do not apply. Further, I intend

    $178 (Avg Bid)
    $178 Avg Bid
    6 bids
    Calculator Ended
    VERIFIED

    ...operation to calculate, each operand can the user enter it may contain two digits and the result will be displayed on the 7-segment display connected to the 8255-PPIIC on the microprocessor kit (the result can be displayed up to 4 digits). *The requested operations: 1-Arithmetic operation: +,-,*,/,^,% 2-Logical operation: (AND), (OR), (Binary shift left)

    $40 (Avg Bid)
    $40 Avg Bid
    2 bids

    I need a mobile app or a pop up when mobile phone is connected with a cable(aux, otg etc) and Bluetooth pairing is done. The first pop up should be a fin...fingerprint matches the second pop up should be pulse rate [login to view URL] the pulse rate recorded matches the previous reading then the app automatically sends a signal to the microprocessor attached.

    $20 (Avg Bid)
    $20 Avg Bid
    5 bids

    I need the design of a microprocessor with 16 cores and 16 bit data bus with basic MIPS ISA, with 4 stage pipeline. I need the verilog code, testbench and physical design layout and testing (I will provide Synopsys tools)

    $566 (Avg Bid)
    $566 Avg Bid
    12 bids

    Hello, I am looking for someone who has experienced designing microprocessor using VHDL. You must have previous expereinced with VHDL and Digital Circuits. I am looking for somone who can finish this project within a week or two. Thanks!

    $158 (Avg Bid)
    $158 Avg Bid
    10 bids