Mm swapimage jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    12,035 mm swapimage jobs found, pricing in USD
    wallap and rs2 4 days left
    VERIFIED

    Rock Anchor Details Total length – 4 m, Diameter – 24 mm, Reinforcement direction – 150, Bond diameter – 0.13 m, Bond skin friction – 250 kPa, Bond resistance – 25.52 kN/m, Spacing - 2 m x 2 m, Bar capacity – 180 kN, Safety factor – 1.8, Grout Strength - 40 MPa Construction Sequence 1. Excavate 2.5 m and install the 1st anchor at RL 172.0m 2. Excava...

    $31 (Avg Bid)
    $31 Avg Bid
    4 bids

    I need a design for a car from top to bottom. In Catia or Autocad 3d 2. After the car is finished, you will have to save hole project and split every part like bumper, front grill, roof, doors, lid, trunk in pieces with a maximum height of 40 CM and a lenght of 40 cm 3. Car dimensions will be: Lenght 500 CM, Wide 220 cm, Height 130 cm 4 The spider web grid to be placed on the front bar, the spide...

    $478 (Avg Bid)
    $478 Avg Bid
    24 bids

    Planetary gear maximum outer diameter range 30-40 mm. I need 3 stage assembled solidworks file and individual solidworks files.

    $22 (Avg Bid)
    $22 Avg Bid
    28 bids

    I need a web scraper written for the following url: [login to view URL] All of the information needed is available on the main page; the number of rows will vary. The output should be a pipe (|) delimited file with the following column mappings: origin_city --> data is located in the "Origin City, ST" column, data located before the comma origin_state --> data is locate...

    $105 (Avg Bid)
    $105 Avg Bid
    4 bids

    I need a web scraper written for the following url: [login to view URL] All information needed is available on the main page. The number of rows will vary. The output should be a pipe (|) delimited file with the following column mappings: origin_city --> data is located in the "START" column before the two letter state abbreviation origin_state --> data is located in ...

    $110 (Avg Bid)
    $110 Avg Bid
    5 bids

    I am looking for someone who can convert (good) 3D scans (.stl files) to a drawing in Solidworks. This means reverse engineering. The 3D scans can go up to a tolerance of 0.2 mm, so they can be very clear.

    $18 / hr (Avg Bid)
    $18 / hr Avg Bid
    65 bids

    Hello, everyone, I am looking for someone who will design 5 funny or cute drink coasters for me in 3d. The coasters should have a width of 12 cm and a maximum height of 2.5 cm. There should also be a round cutout on the top with a diameter of 10.2 cm and a depth of 4 mm. I would have imagined the following models: 1. unicorn 2. Frog 3. Cat 4. Dog 5. Cow The models should be three-dimensional. F...

    $164 (Avg Bid)
    $164 Avg Bid
    24 bids
    Edit 3D STL file 2 days left

    I would like some modifications made to a 3D printing STL file Thicken 3 connecting arms to 3x current size Make outer diameter smaller by 3 mm

    $14 (Avg Bid)
    $14 Avg Bid
    11 bids

    I need a program to take multiple pages of pdfs, convert them to xml format and save the converted file in a particular file naming order. The naming order needs to be in the following format: <device Category>Claim_<File Unique Identifier from company_YYYY-MM-DD> It would be nice if the date is applied automatically, and the device category name could be always the same text as decide...

    $394 (Avg Bid)
    $394 Avg Bid
    4 bids

    Easy Duration Control 7 Time Variants – ss, mm, hh, mm:ss, hh:mm:ss, dd:hh:mm:ss, % Reverse Timer Support Color, Size & Position controls Change font easily titule and time code Fully Customizable Essential Graphics controls for easy customization with just few clicks Max duration upto 3 hours Previewer App included – Can Easily Preview of all timers in one place without installin...

    $11 / hr (Avg Bid)
    $11 / hr Avg Bid
    8 bids

    We need somebody talented to design a printable Rack Card with the attached and below specifications. Company Name: States Taxi Website: statestaxi .com Company Colors: #002868 & #b22234 Document Trim Size 3.75" x 8.28" 95 x 210 mm 1125 x 2483 pixels Full Bleed Size 3.86" x 8.39" 98 x 213 mm 1158 x 2517 pixels Finished artwork extend to fill the full bleed area to avoid ...

    $28 (Avg Bid)
    $28 Avg Bid
    91 bids

    You must make a regular expression that describes each of the following languages (in total there must be 4 regular expressions): a) IPv4 addresses (in decimal). b) Dates (dd / mm / yyyy). c) Binary numbers congruent with 7 module 8. d) Telephone numbers in Costa Rica. Instructions: - Fist create a DFA automaton. - Then by state removal build a regular expression. Skills required: Automata Theo...

    $22 (Avg Bid)
    $22 Avg Bid
    7 bids

    We have already designed a PowerPoint (in 59,5x140 cm) dimensions, and we need to export it into PDF, with the following settings: DPI: 300dpi Dimensions: 85x200cm (850x2000 mm) Color: CMYK (not RGB) We must NOT loose quality for the export The mission MUST be completed within 4 hours

    $34 (Avg Bid)
    $34 Avg Bid
    32 bids

    We have already designed a PowerPoint (in 140x140 cm) dimensions, and we need to export it into PDF, with the following settings: DPI: 300dpi Dimensions: 150x150 cm (1500x1500 mm) Color: CMYK (not RGB) We must NOT loose quality for the export The mission MUST be completed within 4 hours

    $34 (Avg Bid)
    $34 Avg Bid
    23 bids

    I need some 5 mm thick arms that start at the mounts on the hatch and extend up to where the spoiler bolts on (circled in photo). Though the car pictured is not the car they will be fitted too, it will be a vx commodore wagon.

    $117 (Avg Bid)
    $117 Avg Bid
    42 bids

    Support project for sap abap sd,mm,fico ricefw , OOE , fm , webservices development

    $5 / hr (Avg Bid)
    $5 / hr Avg Bid
    21 bids

    I am designing a new Tig welding Torch switch. I am looking to replace a 50 mm in length linear (slide) potentiometer with some type of pressure pad (see image). I would like the user to apply pressure to a pad that would then vary resistance from 1K Ohm to 10 K Ohm. The complete package must be no larger than 70 mm long by 40 mm wide

    $972 (Avg Bid)
    $972 Avg Bid
    31 bids

    In this project, I need you to help me designing 3D electronic enclosure. The dimensions is approximately 100x100x90 mm (length x width x height). I need the original file, accurate design (3D), (.obj file) and the documentation of your work. If you think you are able to conduct it, please let me know, and send me your portfolio (if any). The software you may use: FreeCAD: [login to view URL] Blen...

    $31 (Avg Bid)
    $31 Avg Bid
    20 bids

    This is what I need to do: Target is to generate two qmdl & pcap files based on [login to view URL] file. First *.cfg file: is full diag that means L1/L2/L3 protocols Second *.cfg file: is partial diag that means (L2/L3 & some L1 protocols). How it will works? *.dlf file generated after transforming streams into dlf format Methods to read streams on chip diag module (you can use one metho...

    $5573 (Avg Bid)
    $5573 Avg Bid
    2 bids

    I would like a PowerShell script that recurses a directory tree and emails any file with a modification date past a specified date/time. The top level directory has encoded in the folder name the email address of the user in the form of "[email @ [login to view URL]]". The script should process each top level folder in the specified base directory that is in a format of "Mike Smith ...

    $199 (Avg Bid)
    $199 Avg Bid
    4 bids

    THE PROBLEM I have tokens in a particular project that I want to trade off any CEX or DEX to avoid my trades affecting price on PancakeSwap. THE PROJECT To build a simple trustless dapp that allows swaps on the BSC between my TOKEN and BNB at a set % below the current market price. This will offer an OTC like service to offer TOKEN swaps for fixed amounts of BNB (say in 1, 2, 5, 10, 20, 50 lot...

    $21 / hr (Avg Bid)
    NDA
    $21 / hr Avg Bid
    21 bids

    Design a two sided 85 X 85 mm card to place inside our product boxes. See the attached page for Side 1 and Side 2 Only use the logos and colours in the logos. Use the wording as per the document. You may use the CRM logo as a watermark. Keep the design clean and simple. Final design must be suitable to send as a proof to a printer (and square design 85x85mm). Final adjustments and changes...

    $44 (Avg Bid)
    $44
    64 entries

    Need a FM created for MM module that has to delete and create a requisition. will provide additional details once the offer is accepted. I don't have proper option to select the estimate of this work, it is about 4hours of work even if you stretch it out, so fairly a simple development.

    $91 (Avg Bid)
    $91 Avg Bid
    4 bids

    I need the local guy from Miami / Fort Lauderdale area, I have a Creatbot 600d pro (worthless crappy electronics), 600 mm Chinese printer that uses proprietary motherboard that is poorly supported and it doesn't work. I need to convert using duet controller, it will require rewiring, hopefully we should not have to replace the stepper motors. we must connect the stepper motors, the bed heater...

    $15 / hr (Avg Bid)
    Local
    $15 / hr Avg Bid
    1 bids

    I need to make some adjustments to an existing PCB. Basically I need to add two millimeters to the radius (PCB is round). I have an existing design that I will provide. PCB Specification: Rigid PCB Copper layers (0.035 mm thick) PCB (1.5748 mm thick) Board Size: 1.25" x 1.25" Number of Layers: 2 Material: FR4-TG130 Finishing: Lead Free HAL Copper Thickness: 1oz.

    $408 (Avg Bid)
    $408 Avg Bid
    16 bids

    Hi there, The task is quite simple: take 9 spreadsheets and put them into 1 ‘master’ spreadsheet. Simple - but it will require time and concentration. The work could/should take anywhere between 1-3 hours depending on proficiency. IMPORTANT NOTES: - A 'trader' column needs to be created for Lance - Dates should be simplified to dd/mm/yyyy format (time is not neccesary) (...

    $94 (Avg Bid)
    $94 Avg Bid
    189 bids

    Hi, please help me to convert the images file to excel. I have 21 images that need to convert to an excel file. Please do in an excel file and one month per tab. Just follow all the information stated in the images. For date please use format DD/MM/YYYY. Make sure all the amounts are tally back to the images. Thank you for your help!

    $19 (Avg Bid)
    $19 Avg Bid
    119 bids

    going to start my foundation year and they asked me to provide a portfolio. What should I include in my portfolio? Drawings, sketches, paintings, models, handicraft, sculptures, fashion, graphics, photographs and more. These can be pieces of work you’ve done in school, and of course new pieces of work created for the portfolio. What format and how many pages? Ideally you submit your por...

    $21 (Avg Bid)
    $21 Avg Bid
    7 bids

    I Want Aluminum Ring, Size 182 Mm Dia * 21.5mm Height

    $13 (Avg Bid)
    $13 Avg Bid
    15 bids

    ENTER PURCHASED ITEMS IN INVENTORY AND CREATE PRODUCTS WITH 100% ACCURACY. We require that certain fields be entered along with the invoice such as the number of items per case. The invoices come from various suppliers and the data is not always in the same place. Usually the case pack is 12, 24, 48 for example. Product UPC and expiry also need to be entered in a separate field. See attached an in...

    $4 / hr (Avg Bid)
    $4 / hr Avg Bid
    135 bids

    We are a small boutique producer of marine-based natural supplements and skincare - specialising in Seaweed. We are 4 years old and our business is growing each month/year and is exciting to see our product reaching the far corners of the world. We recently underwent a Brand Review/Overview and are now in the process of rolling out the various elements to suit our new look and feel. We are loo...

    $176 (Avg Bid)
    Guaranteed
    $176
    59 entries
    $8 Avg Bid
    1 bids

    Hi, I'm just starting up a business. I used to be a chef but stopped cooking professionally 18 years ago. I've rediscovered my love of cooking but physically can't work long hours in a kitchen any more. I want to package organic foods. I have been creating recipes for different mixes of nuts. I need a logo design that shows the name of the company (Kasani) but also highlights quali...

    $74 (Avg Bid)
    Guaranteed
    $74
    69 entries

    Need 4 cute animals illustrated for a printed diorama. Each diorama consists of a circular background, the character head, and paws, each as a separate piece. I have provided the basic outline for the character, it can be modified as long as the size is roughly the same. Characters needed: Cute cat - background is a home/indoors Puppy - background is a park Dinosaur - background is a jungle P...

    $140 (Avg Bid)
    $140 Avg Bid
    78 bids

    skills are needed: -abap debugging -SD MM very Good skills - JIT/JIS - German Language (at least reading, not that I need always to translate) You will get tickets or tasks and will login with my name in SAP system. Project is for 3 months from 01.09, but will be probably extended.

    $10 / hr (Avg Bid)
    $10 / hr Avg Bid
    11 bids
    SAP MM project 1 day left

    looking for SAP MM project support and help in resume building.

    SAP
    $148 (Avg Bid)
    $148 Avg Bid
    8 bids

    I need a book cover design, very similar to a existing movie cover. Please make three drafts and we will choose one of them. Title: Michael Schumacher Subtitle: Eine einzigartige Karriere Author: Rudi Singer Book format: 13,5 x 20cm We have to format the book cover later to use it for a audiobook which has the landscape format 140 mm x 120 mm. So the picture has to be big enough to use it fo...

    $30 (Avg Bid)
    $30 Avg Bid
    63 bids

    As a Network Manager in an organization given task to design Network Architecture for their IT Infrastructure. Please consider following 10 network design steps to create a sustainable and future-proof network design: Outline the requirements Draw out the network topology Keep a register of the hardware Label the hardware Keep a record of the software used IP addresses and subnets Test the networ...

    $127 (Avg Bid)
    $127 Avg Bid
    9 bids

    I need someone to draw a PCB board for an operational amplifier with a Sonion microphone. The board must be compact, single-sided and maximum 3.6 mm wide. The output should be a gerber file (in KiCad or AltiumDesigner format) for services like: jlcbcp Datasheets and scheme in attachments.

    $36 (Avg Bid)
    $36 Avg Bid
    12 bids

    This is what I need to do: Target is to generate two qmdl & pcap files based on [login to view URL] file. First *.cfg file: is full diag that means L1/L2/L3 protocols Second *.cfg file: is partial diag that means (L2/L3 & some L1 protocols). How it will works? *.dlf file generated after transforming streams into dlf format Methods to read streams on chip diag module (you can use one metho...

    $2673 (Avg Bid)
    $2673 Avg Bid
    6 bids

    I need a remote function Module created for some MM functionality using BAPI Plan order delete and create along with some checks. Requirement is not complicated.

    $73 (Avg Bid)
    $73 Avg Bid
    6 bids

    We need a script which makes it possible to use Google Spreadsheet (corporate account) as a lookup database for Google New Sites. We need a GET command for n columns in Google Sheet to be posted in Google New Sites. *Google New Site, Search Field Script should include two search options/fields. 1. a search field which search in 4 columns (column w, x, y, z) to pick and show matching posts 4. a p...

    $465 (Avg Bid)
    $465 Avg Bid
    11 bids

    OUTSOURCING BRIEF Create As-built Vectorworks Model of House & Site from LAZ Point Cloud SCOPE I'm looking for an intermediate to experienced draughtsperson to create a 3D as-built model of an existing two-storey house, studio, and site. The model is to be in Vectorworks Architect 2020, and the source data is a LAZ point cloud file that encompasses the whole of the site, house, and studi...

    $14 - $21 / hr
    $14 - $21 / hr
    0 bids

    It requires the design of a circuit that has a sensor that can measure a distance of 5 cm to 500 cm with a resolution of 1 mm. You must maintain that resolution throughout the distance to be measured. More details about the PCB layout will be given to those who really have a proposal on which sensor can be used for this project. (Preferably, be able to make the design in eagle or fusion 360).

    $124 (Avg Bid)
    $124 Avg Bid
    10 bids

    P to P process,sales and distribution Process,Inventory Analysis by using updated version SAP

    $8 / hr (Avg Bid)
    $8 / hr Avg Bid
    9 bids

    Modify a PSD menu originally in A1 size: A. Modifications to the text and item rearrangement without change to basic design elements (fonts, brand colors, icons): 1- adding new dishes to the menu 2- changing prices 3- regrouping items into 3 categroies B. Creating two versions of the new layout for printing: 1- Poster A1 Format: 594x840 mm, Print: 4+0 (CMYK), 2- Xbanner DP 600x1600 mm ([lo...

    $27 (Avg Bid)
    $27 Avg Bid
    12 bids

    We are a new dog food brand called "Frago" which makes natural and fully balanced ready to eat dog food. The nutritional content of the product exceeds the requirements specified by the American and European pet food associations. Frago is a premium brand and we are looking for a packaging design and a similar themed Website graphics. Packaging is in a rectangular carton box of size 180 ...

    $92 (Avg Bid)
    $92 Avg Bid
    45 bids