Modbus pic microcontroller jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    6,746 modbus pic microcontroller jobs found, pricing in USD

    ...these sensors will be used to control the output devices. As an example, if the temperature or humidity is rising beyond a certain set limit, it will send the signal to Microcontroller, which in turn,communicates to the Fan to start working so that the temperature can be regulated. Similarly, based on the output of Gas sensor, action of Water Sprinkler

    $190 (Avg Bid)
    $190 Avg Bid
    1 bids

    We are working on a project involving detection of black ice using an infrared light and a photodiode connected to a micro controller and from the output of the photodiode which is in a form of voltage we can differentiate and warn the driver of black ice and we also can’t use arduino, need a micro controller similar to atmega8 something along those lines. We need a complete schematic tell...

    $140 (Avg Bid)
    $140 Avg Bid
    14 bids

    ...compiler project), with the main library ported, as well as three of the library's example files. More details will be provided when accepting the job Details: Target Microcontroller: PIC12F1840 Desired Frequency: (Internal) 16 MHz Required Example Codes - DS18B20_thermometer - DS2431_EEPROM - OneWireHubTest (Modify to have 2 instances of DS18B20

    $191 (Avg Bid)
    $191 Avg Bid
    6 bids

    Need PIC Programmer for MikroC for a Simple Code PWM for 3 Pins simple code for pic16 controller.

    $172 (Avg Bid)
    $172 Avg Bid
    28 bids
    Firmware/Software Engineer 5 days left
    VERIFIED

    Looking for someone who has experience in programming an 868E sim. I want to use this as the microcontroller

    $522 (Avg Bid)
    $522 Avg Bid
    6 bids

    I have a raw pic of a singer to e edited professionally for magazine cover , instagram post and facebook post sizes (I need you to resize the pic) , and write few info on the pic (artist name, project name, and official website links) , in addition to background editing

    $25 (Avg Bid)
    $25 Avg Bid
    28 bids

    ...fro or single run clean) on a fixed time. We have a Control PCB which has 10 Digital Inputs , 2 Analogue Inputs & 4Digital Outputs in each cleaning system which will work on Modbus protocol to communicate with your software. PC which has the control software is connected to Data transmission unit(DTU) which connects with control PCB in wireless connectivity

    $10443 (Avg Bid)
    $10443 Avg Bid
    12 bids

    Pic micro controller to measure 3 phase voltage and current measurement & control the relays based on current readings

    $14 / hr (Avg Bid)
    $14 / hr Avg Bid
    11 bids

    I'll provide you with a pic and high quality audio I need to create a music video, you'll have to do a waveform sync with beat (or moves nicely with the song ) in the background of the pic , or any lighting effect in the background, show me what you can do to look epic I'll upload the audio when we agree

    $162 (Avg Bid)
    $162 Avg Bid
    7 bids

    ...th-anti-parallel-diode/ihw40n135r5/ MCU: Infineon: XMC1404-Q048X0064 AA [login to view URL]!overview For the Project its necessary that the MCU has a Can-Bus. Driver: has

    $1557 (Avg Bid)
    $1557 Avg Bid
    12 bids

    I am using PIC32MX250F128B for my project. I have written a code where I am collecting data from a vibration sensor and sending them to the sram (23LC1024) and then displaying them through the serial monitor as they are sampled. I am using timer3 to control the ADC and set my sampling frequency. The main problem in that is I am not able to store the ADC data in the sram buffer and display it alto...

    $140 (Avg Bid)
    $140 Avg Bid
    7 bids

    Make sure you read it from top to bottom... "Urgently" need a "graphic designer." Price is fixed. You must be expert and creative. You need to prepare at least 20 posts per month for hotels/resorts/historical places. I am telling you again that my prices are fixed. If you have a team, you are most welcomed. Make sure you do it with creativity. If you do it great, you will get ...

    $58 (Avg Bid)
    $58 Avg Bid
    25 bids

    Obstacle avoiding robot using pic (pic 16 f887) microcontroller. Sensor using in this project- 1. Front sensor - Max Sonar ultrasonic sensor 2. Left-right sensor- Infrared sensors Motor driver module=L298N dual H bridge Software for code righting - MP Lab

    $108 (Avg Bid)
    $108 Avg Bid
    17 bids

    ...project in TIA portal and Ignition HMI and make it generic, in a way that all configuration will be done only from the HMI The input is a real project of BMS which consist of modbus elements: generators, UPS, FireAlarm system, Power consumption meter, AHUs in addition and electrical IOs that are connected to Siemens PLC The task is to create several technician

    $1755 (Avg Bid)
    $1755 Avg Bid
    14 bids

    ...should be stored on the microcontroller. When close to each other 2 guests' microcontrollers with same input (eg letter A) should be able to recognize each other and to give a signal like Led is on, a buzz or a signal. The guests should be able to adjust on the website the range for discovery in the network. On the microcontroller should be a button for

    $268 (Avg Bid)
    $268 Avg Bid
    4 bids
    $51919 Avg Bid
    11 bids

    chipKIT Max32 Digilent Microcontroller Programming with the following/not limited sensors 1. Accelerometer 2. Temperature 3. RPM [login to view URL] shield [login to view URL] shield [login to view URL] Shield 7. etc

    $266 (Avg Bid)
    $266 Avg Bid
    5 bids

    I have firmware in C for a MikroElectronika "PIC Clicker" development board using a PIC18F47J53. It includes MikroE's USB library for CDC (USB RS232 emulation). Works fine on Windows, but on a Mac (e.g. OS-X 10.9.5) it registers a /dev/[login to view URL] port but doesn't communicate (hangs on host write to board). On Linux, it creates a /dev/ttyACMXX port

    $1507 (Avg Bid)
    $1507 Avg Bid
    10 bids

    change app pic from yellow cab of lake norman to yellow cab nc !

    $12 (Avg Bid)
    $12 Avg Bid
    5 bids

    I have a microcontroller that has software loaded on it. I need someone to duplicate the software and be able to load it onto the microcontrollers. The microcontroller has a USB port on the side of it as well as a micro SD card port but i believe the USB port is what will be used to load the software onto the microcontroller. I believe this is eeprom

    $2264 (Avg Bid)
    $2264 Avg Bid
    26 bids

    Hi Dear Please read [login to view URL] I need programming firmware of STM32F103 Microcontroller. I have customized PCB. I have received the components and the PCB. 1) I will assemble the different parts of the circuit and test their devices with very simple programs.

    $83 (Avg Bid)
    $83 Avg Bid
    6 bids

    220 pulsar pic editing. It looks beautiful. Its colour must be change. And nature colour also changed.

    $274 (Avg Bid)
    $274 Avg Bid
    29 bids

    ...instructional technical manuscripts for the operation. Skills Required: -Experienced in architecture design, software life cycle in embedded applications. -Experienced in Microcontroller Architecture, RTOS -System level architecture, design and Integration skills -OS level porting. -Understanding of IoT technology. -Exposure to Sensors, would be an added

    $826 (Avg Bid)
    $826 Avg Bid
    9 bids

    Smooth out feet and legs. even out toes

    $18 (Avg Bid)
    $18 Avg Bid
    14 bids

    Photoshop of a picture. Cut the image from one pic and add it in another one.

    $19 (Avg Bid)
    $19 Avg Bid
    45 bids

    I've a project to design a pcb which has 220V AC inputs (4), 24V DC inputs (4) 12V DC inputs(2) and digital outputs(4). ...outputs(4). I need one GSM module, sim card holder, SMA antenna, speaker and microphone pins on the board. Operating voltage of the board should be 24V DC. We can choose microcontroller together and talk in detail about the rest.

    $243 (Avg Bid)
    $243 Avg Bid
    31 bids

    ONE WAY MESSENGER FOR MOBILE PHONES. The application consist of sending real time messages and pictures from desktop to subscribers mobile phones (Android & IOS). The messages sent are for different categories and the subscribers have to choose which categories they want to subscribe so they will receive only the messages related to those categories. Subscribers are required to register to get...

    $562 (Avg Bid)
    $562 Avg Bid
    9 bids

    Please contact me with you experience in the areas of the scope plus your hourly rate. We then award Phase one only. If this goes well, we define and move to Phase 2 etc. The systems will be setup on static IP in Australia for undisturbed working. Complete documentation will be provided and there is 24/7 access to the system.

    $17 / hr (Avg Bid)
    $17 / hr Avg Bid
    12 bids

    Motor controller that communicates via Modbus over RS232. We want to make a simple battery meter by getting the values of state of charge on the motor controller. This is to be graphically represented as a battery meter energy on the OLED display. You will need to use MODBUS related libraries for Arduino and the Adafruit OLED display driver / libary

    $133 (Avg Bid)
    $133 Avg Bid
    16 bids

    I m Doss , i would like display video on two module p5 using pic for exemple 18f6722 ,

    $10 - $30
    $10 - $30
    0 bids

    I have an arduino code to read modbus data form another device by using MAX485 and arduino mega now I want to do the same thing but by using raspberry pi and MAX485 in python so I want to convert this arduino code to python to be able to run on (raspberry pi).

    $36 (Avg Bid)
    $36 Avg Bid
    13 bids

    Hello, We are looking to have a PCB designed, which essentially uses a Pycom LoPy microcontroller. The design will need to use a driver chip and should be capable of reading information from at least 4 sensors, supporting one or more of SDI-12, I2C, Analogue and Digital. It will also be required to drive output (for switching of relays).

    $1202 (Avg Bid)
    $1202 Avg Bid
    30 bids

    Hello. ImI using PIC 18F25K22 and XC8 compiler. I need to measure the power factor of our circuit. To measure the power factor first, i need to measure the time between two different signals on two different pins. Please help me to do this

    $235 (Avg Bid)
    $235 Avg Bid
    15 bids

    Hello. ImI using PIC 18F25K22 and XC8 compiler. I need to measure the power factor of our circuit. To measure the power factor first, i need to measure the time between two different signals on two different pins. Please help me to do this

    $292 (Avg Bid)
    $292 Avg Bid
    14 bids

    We curate art online for men and women who are in prison ([login to view URL]). We get checks that go to a mailing agent and that agent scans to email...so we never have a physical copy of our checks. We use the ingo app to cash our checks but it prompts the camera app on our device to take a picture of a check that we have in hand. That won't work. What we need (I think) is a camera app...

    $494 (Avg Bid)
    $494 Avg Bid
    23 bids

    Hello, I need someone to design my 2 laye...layer PCB layout, I have already designed the schematic in Eagle. The circuit consists of microcontroller at the heart, five different sensors and some additional components (voltage converter modules, relays, LM358 opamp) that connected to the microcontroller. I will send the schematics later. Thank you.

    $24 (Avg Bid)
    $24 Avg Bid
    25 bids

    i have modbus pcap file to be analyzed by using wireshark. then i wanna modify py files to satisfy cretin requirements.

    $50 (Avg Bid)
    $50 Avg Bid
    4 bids

    Need someone who have worked on pic12f675

    $29 (Avg Bid)
    $29 Avg Bid
    5 bids

    I have a picture of my product. I don't like the name of the manufacturer of the case on it. So I need that just blended out using the colour around it. I also need some writing (around 17 letters) placed on the side of the box

    $45 (Avg Bid)
    $45 Avg Bid
    24 bids

    I write java programmes .... Recently worked on a microcontroller using java ME

    $10 (Avg Bid)
    $10 Avg Bid
    1 bids

    I need some graphic [login to view URL] avatar

    $24 (Avg Bid)
    $24 Avg Bid
    21 bids

    ...counter is based on microcontroller clock => the resolution can not be exactly .5 ms. So the tickreturned value has to be converted in half ms by the PC client. Ex: tick controller is .4ms. The counter value is 4561231 ticks. So the counter millisecond value is: 4561231 * .4ms This is an example, .4ms has to be replaced by the microcontroller clock period

    $232 (Avg Bid)
    $232 Avg Bid
    11 bids

    I am building a model of an intersection in assembly language using ntel® Quark™ Microcontroller D2000. I am looking for some professional to write some codes for the project. I can share my idea and some details and code.

    $143 (Avg Bid)
    $143 Avg Bid
    4 bids

    i have this website with regular menu i need to make it like the menu in this website: http://talents123.ca. on hover the icon moves, dropdown same color as the icon ... want it multicolor. same as the menu in the link above. only serious and know php and css....

    $22 (Avg Bid)
    $22 Avg Bid
    18 bids

    The proposed design is to use the Picaxe 08M2. The chip is to operate two timer functions. 1. Using a keyswitch input it generates a pulse output depending which way the key switch is turned (when turned on it outputs a high signal for 2.5sec, when turned off it outputs a high signal for 6sec). 2. When an input goes high, it resets a 24hr timer. If the input doesn't go high before the 24hr...

    $5 / hr (Avg Bid)
    $5 / hr Avg Bid
    4 bids

    I am an inventor who has a PCB ready to be programed. I am seeking someone to create a program for the ATTiny461A microcontroller. See the attachment for the program needed.

    $369 (Avg Bid)
    $369 Avg Bid
    24 bids

    I am building a model of an intersection in assembly language using ntel® Quark™ Microcontroller D2000. I am looking for some professional to write some codes for the project. I can share my idea and some details and code.

    $770 (Avg Bid)
    $770 Avg Bid
    3 bids

    ...of an infrared sensor, a microcontroller, an LCD, laser targeting, and a PCB and casing to hold all required circuitry and components, will be described. The sensor used to detect the wavelength and intensity of incoming IR radiation was chosen based on the available built-in optics and filtering circuitry. The microcontroller and LCD were chosen to be

    $275 (Avg Bid)
    $275 Avg Bid
    5 bids

    we had design the tester for continuity checking of wire and verify electrical component

    $10 / hr (Avg Bid)
    $10 / hr Avg Bid
    7 bids

    I have a code which is using PIC controller and I want to taje the design to Open CPU using SIMCOM or Qualcom module which support Open CPU modem. I am looking for someone who has done similar work before and can undertake the same. The project is for a GPS tracker. We can undertake one project and if its succesful undertake the second one after

    $384 (Avg Bid)
    $384 Avg Bid
    4 bids