Nat upnp jobs

... This configuration should allow me to deploy the EC2 instances and also bring-down when needed. Key Requirements: An EC2 instance with Security group, Keypair, VPC components, CloudWatch logs and WAF integration. The EC2 will be launched in Private Subnet, with ALB and no direct traffic allowed to the instance. A Bastion/jump server for SSH to EC2. EC2 connects to the internet using NAT-gateway. WAF to be integrated with ALB, and ALB only listens on HTTPS. Security groups are restricted with limited access. Allocate and associate an elastic IP to the instance. The EC2 instance will run Ubuntu and serve as application server. I can provide AMI image of the web-app. It is a Python FastAPI/Nginx app. No other service is needed like RDS or S3 etc. Docker or Kubernetes are not need...

I have installed FreePBX - distro install. - My extension is registering fine. - When I call another extension, call rings but there is no audio - When I call external number, call rings but there is no audio Error message on Asterisk ...My extension is registering fine. - When I call another extension, call rings but there is no audio - When I call external number, call rings but there is no audio Error message on Asterisk interface is: [2024-04-05 04:17:09] NOTICE[2335]: res_pjsip_sdp_rtp.c:145 rtp_check_timeout: Disconnecting channel 'PJSIP/1011-0000000b' for lack of audio RTP activity in 30 seconds SIP NAT is enabled Firewall is disabled SIP NAT Settings > External Address > Public IP Address is added I need someone to check this over Anydesk & ...

I need an expert who can assist in configuring network address translation (NAT) on iptables, particularly focusing on Static NAT. Key Project Requirements: - Deep understanding of iptables operations - Proficiency in dealing with Static NAT configuration - Ability to handle specific IP ranges during the configuration Your work will revolve around ensuring that these specific IP ranges are correctly configured in the Static NAT setup. Familiarity with various internet protocols will be advantageous. This project requires a careful and meticulous individual with a knack for detail, as absolute precision is crucial in executing this task. Please, only apply if you have suitable skills and experience. check the attached picture. the 81 port does already wor...

As an enthusiast in scheme/racket programming, I'm currently building a Church-compiler. The project is majorly complete, however, there are some aspects I need professional assistance with. The key tasks inclu...I need professional assistance with. The key tasks include: - Writing and completing certain functions in the program to pass pre-existing test cases. - Enhancing syntax parsing to better compile to Lambda-calculus In order to achieve this, I'm in need of a programmer with substantial experience in Scheme/Racket, particularly in implementing algorithmic logic, constructing compilers(church->nat, church->bool,church->listof and more) and syntax parsing techniques. If you are proficient in these skills, I would love to connect with you. More informati...

I want to install a nextcloud-aio instance on rocky linux behind a haproxy the nextcloud is supposed to be on a seperate vm all VMs are behind NAT

/ip route add dst-address=0.0.0.0/0 gateway= distance=1 add dst-address=0.0.0.0/0 gateway= distance=2 /ip address add address= interface=ether2-WAN1 add address= interface=ether3-WAN2 add address= interface=ether1-LAN1 /ip firewall nat add chain=srcnat action=masquerade out-interface=sstp-adsl add chain=srcnat action=masquerade out-interface=sstp-starlink add chain=srcnat action=masquerade /interface sstp-client add name=sstp-starlink connect-to=<server_address> user=vpnuser password=vpnpassword certificate=none profile=default-encryption disabled=no /interface sstp-client add name=sstp-adsl connect-to=<server_address> user=vpnuser password=vpnpassword certificate=none profile=default-encryption disabled=no I want Force Interface

...the user through that dashboard & push/deploy that configuration to the particular or multiple routers & switches automatically. The goal is to remove the use of Command Line Interface (CLI) to manually write configuration commands to each of the routers & switches. For this academic project, the configuration category is limited to Hostname, IP addresses of the interface, OSPF, VLAN, HSRP, ACL, NAT. NOTE: Similar to the below picture, you are required to use GNS3 to build a tier-3 network topology with c2600 routers & c3725 switches to demonstrate this project in a simulated environment. You are requird to use HTML CSS JavaScript for building very simple but attractive & cool dashboard, Python for backend functional/logical script, Ansible (python framewo...

...clients over a Wi-Fi local network, typically say 2 clients. There is no need to confirm the messages in either way. Consequently it seems that UDP is the right protocol to be used (to be confirmed by the contractor). 2. The server should also support its part of a detection mechanism that should allow the clients to automatically detect the address IP of the server (on the same router), like UPnP or even better a custom method, possibly simple but reliable. 3. All the clients that have sent a message to the server should be registered in a simple IP list. Then every message from one client should be automatically re-sent over Wi-Fi/UDP to all registered IP-s. 4. Additionally the component should implement low-level basic RX and TX interfacing over one UART and one I2C port. ...

I'm seeking a professional, well-versed in GenieACS for TR-069 configuration. The primary task is to configure CPEs to connect to GenieACS behind NAT, through XMPP and STUN server. the server is deployed, GenieACS installed, XMPP and STUN servers are installed on the same server. I need someone who can configure it and to test a connection of CPE behind NAT through secure channel. the CPE is Mercusys H50G. Ideal Candidates: - Extensive experience with GenieACS for TR-069 configuration - Solid understanding of remote device provisioning. This role requires a specialist, capable of performing tasks with precision and efficiency. If you meet the above criteria, I'd love to hear from you.

...handling low-volume, ca. 20-100-byte command messages with rather relaxed performance requirements. The messages will be coming on a non-regular basis from a few clients over a Wi-Fi local network, typically say 2 clients. The server should also support its part of a detection mechanism that should allow the clients to automatically detect the address IP of the server (on the same router), like UPnP or even better a custom method, possibly simple but reliable. All the clients that have sent a message to the server should be registered in a simple IP list. Then every message from one client should be automatically re-sent over Wi-Fi/UDP to all registered IP-s. There is no need to confirm the messages in either way. Consequently it seems that UDP is the right protocol to be used ...

Currentl...on single ISP link. recently purchased another one and required to configure on Paloalto firewall for failover as active-backup. Meaning, in the event of one link failover, the internet will automatically route to another ISP. Ideal Skills: * Extensive Paloalto firewall configuration experience * Proficient in setting up dual isp (active-backup) failover setup * Strong knowledge of routing and NAT These skills and experiences will equip you to not just meet but surpass the project requirements. Zooming in on IP-based control, your role will involve configuring the firewall to manage and monitor network traffic on an IP level. If you can effectively work on this project and deliver outstanding results, there's the potential for future projects. So, be ready to bri...

...Setup: - Configure NFTables for efficient and streamlined firewall management. - Troubleshoot and resolve any NFTables-related issues to optimize performance. 3. pfSense Integration: - Integrate pfSense with GitLab for a cohesive and comprehensive firewall solution. - Ensure smooth communication between GitLab and pfSense to enhance overall security. - Currently there is a bug where NAT ports 80/443 from Proxmox to pfSense to GitLabs, the webpage server will come up and display however the VM cannot access internet, - If you remove port 80/443 then VM can access internet but not display webpage. 4. GitLab Deployment: - Deploy GitLab within our cloud infrastructure to facilitate centralized firewall management. - Set up GitLab for optimal performance, t...

...the message type and If the 2 bytes are 0x58, 0x02 then put the message also into the TX-I2C queue In the case of RX I2C the messages from this queue once received should be put into the TX-UART queue. The project should also include additional server and client functions that will allow the client to automatically detect the address IP of the server (on the same router) by the clients, like UPnP or some other, possibly simple but reliable custom method. Additionally the server should collect the IP of the clients that are currently active to be used to enable communication in the opposite direction. As part of the offer I would like to ask for a proposition of the approach to the component development, in particular: • Is it worth and if so how to address multiplatform...

I have a project that involves the creation of AWS resources, specifically using Terraform. I am looking for a professional who can help me with this task. Here are the specifics of the job: -VPC with public and private subnets Internet Gateway for public subnet NAT Gateway for both public and private subnets Route tables and associations Application Load Balancer (ALB) with listener and target group Bastion(Jump host) Instance in public subnet Auto Scaling Group (ASG) for EC2 instances RDS instance for PostgreSQL database Security groups for ALB, EC2 instances, and RDS The ideal freelancer for this job is someone who: - Has a strong experience and is adept at using Terraform for AWS resource provisioning. - Understands AWS ASG, Load balancer EC2, RDS, and S3 bucket and can make r...

I require assistance in developing and optimizing my Nokia 7705 SAR network. The project will entail: - Static NAT and VPN Configuration: For both primary and secondary routers - Fail over Testing

...setting up the development environment Scope of work 1. We will give you the URL to download the base source code 2. Setup the development environment on the remote machine 3. Setup development environment dependencies 4. Compile the source code 5. Router basic functionality should work. e.g. refer Sr. no. 5.1, 5.2 & 5.3 5.1 Do the network configuration & Check the network services - DHCP, DNS, NAT, QoS, VLAN, IPV4, IPV6 5.2 Configure network settings - Setting up firewall, VPN Support, File sharing support, Web server 5.3 Test the wireless networking standards such as 802.11a/b/g/n/ac. 6. demonstrate the change in the source code Deliverables 1 OpenWRT Development environment setup in remote machine 2 Compilable OpenWRT source code 3 Readme file covering all the ste...

We are looking for a Cloud or Network Engineer to setup a VPN. This setup will include both client-to-site and site-to-site functionalities, employing shared keys and a NAT Gateway. We use both platforms AWS and GCP but we prefer to setup on our GCP We have all the data you need to complete these tasks: - Establishing the VPN on GCP or AWS (not both) - Setup the capability of client-to-site and site-to-site connection - Incorporating NAT Gateway into the setup. To be successful in this task, you'll need: • Exceptional Cloud and Network Engineering skills. • Proven expertise in VPN setup. • Familiarity and confidence working with GCP or AWS platforms. • You will be granted full administrator access to execute the project. We need a qualified individ...

...activities of employees using smartphones and computers, ensuring comprehensive insight into access patterns across the organization. Project Overview: The solution will centralize traffic from all locations to the organization’s headquarters using VPNs, post which, traffic will be directed through a router or switch supporting Flexible NetFlow, before exiting to the internet via CGNAT (Carrier-Grade NAT). The organization plans to deploy Fortigate-201F units at the headquarters and Fortigate-60F units at each location, with IPSec connections envisioned for secure site-to-site communication. Requirements: Traffic Analysis and Bandwidth Management: Utilize Flexible NetFlow for traffic analysis to identify individual flow data, enabling the identification of excessive usa...

Project overview: We are in search of a talented animator to produce two customized animation videos for the LIFE Aegypius Return conservation project. This initiative aims to expand and consolidate the Cinereous Vulture population in Portugal and Western Spain. The animation videos will focus on the recolonization of the species and conservation efforts of the Cinereous Vulture. Responsibilities: The chosen animator will be required to customize visuals to depict specific wildlife species like the Cinereous Vulture, local habitats, and conservation activities in a creative and engaging way. Each video will necessitate voiceover narration and subtitles in three languages: English, Spanish, and Portuguese. The animator is expected to handle voiceover, subtitle integration, and background ...

...che vendo (escursioni in montagna). L'idea essenziale è quella di un monogramma con le lettere G e M (GM). Logo che deve incarnare l'essenza della montagna e della natura. Se dovessi dare un'idea dell'estetica attraverso concetti di riferimento (come un brainstorming), le idee sarebbero le seguenti: wilderness - national park service - rangers - stile coloniale - victorian age expedition - nat geo expedition - adventure - heritage - cultural traditions - rural towns mi si perdoni l'inglese ma mi sono venute in mente queste cose, il logo deve in qualche modo fare trasparire questi modelli estetici. l'idea è quella di avere: - Logo GM agile - Logo GM con inserto di un albero e una montagna - Logo gm con inserto di un albero e una m...

/ip route add dst-address=0.0.0.0/0 gateway= distance=1 add dst-address=0.0.0.0/0 gateway= distance=2 /ip address add address= interface=ether2-WAN1 add address= interface=ether3-WAN2 add address= interface=ether1-LAN1 /ip firewall nat add chain=srcnat action=masquerade out-interface=sstp-adsl add chain=srcnat action=masquerade out-interface=sstp-starlink add chain=srcnat action=masquerade /interface sstp-client add name=sstp-starlink connect-to=<server_address> user=vpnuser password=vpnpassword certificate=none profile=default-encryption disabled=no /interface sstp-client add name=sstp-adsl connect-to=<server_address> user=vpnuser password=vpnpassword certificate=none profile=default-encryption disabled=no I want Force

I am in need of an expert in firmware NAT network VPN, specifically skilled in using Wireguard, to set up a server and establish a VPN tunnel. The aim is to ensure secure data transmission by directing all mobile phone traffic through this tunnel. What I Require: - A shared VPN tunnel setup for all mobile devices. - Competence in - The task only involves setup and installation of the Wireguard VPN system. Regular updates, maintenance or dealing with technical difficulties will not be required. - A strong background in firmware NAT network VPN This project requires someone with profound knowledge of VPN and excellent problem-solving skills in order to address the unique challenges this setup might present. If this sounds like you, please place your bid. Your extensive

...comprehensive monitoring solution for my Linux NAT server. The server acts as a NAT gateway with two PPPoE servers and is crucial for managing traffic for my network. I want to set up Grafana dashboards integrated with Prometheus and Node Exporter to visualize various metrics and generate reports for monitoring network traffic and system performance. Key Requirements: Grafana Dashboard Setup: Configure Grafana to create visually appealing and informative dashboards for monitoring network traffic, system resource utilization, and other relevant metrics. Prometheus Integration: Integrate Prometheus to scrape metrics from both the Linux NAT server and Node Exporter for comprehensive monitoring. Node Exporter Configuration: Set up Node Exporter on the Linux NAT...

...BGP #VLAN, VTP, STP, HSRP, GLBP, VRRP, SPAN, RSPAN, DHCP Snooping, Dynamic ARP Inspection, ARP ACL. #CISCO nexus 9k and CISCO ACI solution like BD, VRF, EPG, Tenant, L4-L7 graph etc. #ACL, NAT, Transparent Mode, Multiple context and Failover (Active/Active, Active/Standby) Site-to-Site VPN, Remote Access VPN and SSL VPN, Intrusion policy, AVC, Malware & File Policy etc in Cisco ASA, Next Generation Firewall and Firepower Management Center (FMC) #F5 BIG-IP Local Traffic Manager (LTM) and Application security manager (WAF). #Cisco CUCM 9.0 and 12.4, CISCO WSA and ESA, CISCO ISE. #OSPF, BGP, NAT, DHCP, L2TP, IPSEC, PPP, Firewall etc in mikrotik router. So you are requested to first discuss the project and requirements and after being satisfied please awarded me w...

Help needed to work around a TCP NAT port binding timeout issue on the WAN network that our system uses. This is somewhat of a special case because the WAN is through satcoms. Specifically, clients on the GGSN tun0 connection may keep TCP sessions open but silent for >5 minutes, and the satcoms closes unused TCP ports after silence for 5 minutes. All we need is the GGSN to periodically generate a few additional TCP ACK messages for ports that have been silent for 2 minutes. We don't want to use the similar Linux global settings for tcp_keepalive_time because that impacts other TCP sockets. I have a lab system available with source code on a public IP address you can access. I expect this will take about 10-15 lines of code and around 2-3 hours. More precise detail and...

...and awards. • Your application should include samples of your past work to demonstrate your talent and experience. • The tone of the biography should be inspirational and motivational, painting an accurate, yet captivating, picture of the artist's journey. We are identical twins that perform Jazz/Great American Songbook. Think Frank Sinatra (pre My Way/New York New York/Strangers In The Night), Nat King Cole, Louis Armstrong, Ella Fitzgerald. We're referred to as Jazz vocalists, but are probably more accurately Balladeer's, crooners, or torch singers. Experience in writing for the arts sector is a definite advantage. Looking forward to collaborating with a creative writer who can bring an artist's story to life!...

Need python API for a TP-LINK (network router) and would like modify the ports In the TP-link: Transmission/NAT/Virtual Servers The field under this are ID, Name, Interface, ExternalPort,InternalPort, InternalServerIP, Protocol, Status, Operation Have a way we can screen share ? There is hope you can give your “best” price; unemployed, and have cancer with bills backing up, $10 possible? Please note $10 is the max total that I can handle for this (doing hourly reduces % fee). Will leave a Glowing paragraph of feedback 5 stars : - ) My funds are low but will pay quick and leave 5 stars. Please give your best possible for your bid ? (something reasonable?) Please note there is hope we can mutually complete this task; we can leave

Hello have terraform for a TP-LINK (network router) and would like modify the ports In the TP-link: Transmission/NAT/Virtual Servers The field under this are ID, Name, Interface, ExternalPort,InternalPort, InternalServerIP, Protocol, Status, Operation Can you examine if ONE of these providers will work; should only work on my lan (at least I kind of expect that) Have a way we can screen share ? There is hope you can give your “best” price; unemployed, and have cancer with bills backing up, $10 possible? Please note $10 is the max total that I can handle for this (doing hourly reduces % fee). Will leave a Glowing paragraph of feedback 5 stars :

...STUN server (probably my own STUN server using CoTurn) Check if it's possible to use use a direct connection to communicate with the players. If it's not possible to use a direct connection (due to NAT or firewall), connect a TURN server instead. Once the connection is made, then send messages between some clients and then terminate the app. This is just the basic summary. Please refer to the PDF attached for the full specification. I don't want to use WebRTC due to its high latency, but instead need to use raw UDP packets (SOCK_DGRAM). This is both portable and performant. There are various NAT traversal libraries out there, but I prefer using PJSIP because Android and iOS devices are supported. If you prefer to use another library, please consult me f...

Linux Routing Help I am experiencing routing table configuration errors on my Ubuntu Linux distribution and I am looking for someone with advanced expertise to help me resolve this issue. Specifically...routing table configuration - Optimizing the routing table for efficient network traffic flow - Troubleshooting any connectivity issues related to routing Ideal Skills and Experience: - Advanced knowledge and experience in Linux routing - Proficiency in Ubuntu Linux distribution - Strong understanding of routing table configuration and troubleshooting - Familiarity with network address translation (NAT) problems and their solutions If you have the advanced expertise required and are confident in your ability to resolve routing table configuration errors on Ubuntu, please reach ...

...they both get peers from external internet. lighthouse on mac seems to not function and stops at a step it will connect to external website to get data. this same docker compose works on windows, and lighthouse container processes as expected but the networking a small issue. it is loosing peers on windows, error says uPnP isn’t working but i’ve gone through all the windows settings and can’t find a problem I’ve setup port forwarding on the router so not port conflicts, uPnP is turned on at the router, and windows service discovery, file sharing etc is turned on I suspect it a unknown network issue with docker/ docker compose. this is my first docker compose for mac and windows and i work with linux not windows/mac. The end result i’m loo...

...STUN server (probably my own STUN server using CoTurn) Check if it's possible to use use a direct connection to communicate with the players. If it's not possible to use a direct connection (due to NAT or firewall), connect a TURN server instead. Once the connection is made, then send messages between some clients and then terminate the app. This is just the basic summary. Please refer to the PDF attached for the full specification. I don't want to use WebRTC due to its high latency, but instead need to use raw UDP packets (SOCK_DGRAM). This is both portable and performant. There are various NAT traversal libraries out there, but I prefer using PJSIP because Android and iOS devices are supported. If you prefer to use another library, please consult me f...

Project Title: SQUID Proxy configuration with AWS I am looking for help to configure SQUID Proxy in AWS EC2. There will be NAT Gateway, SQUID Proxy and EC2 VM. Traffic from EC2 VM need to go through SQUID Proxy, then NAT then it need to reach internet. Skills and Experience: - Experience in configuring SQUID Proxy - Familiarity with Linux operating system - Experience with AWS EC2 and its networking capabilities

I am currently experiencing an issue with online games and I need help with it. My current internet service provider isn't Comcast or AT&T. I'm using a wired connection, I have 1gbps download and 500mbps upload, I play on my xbox one x, the nat is open, upnp enabled, I use a low response time tv, I see no lag, ping is great, but for some reason, something is not right. I would like help figuring out what exactly is causing this issue. If you are an experienced technician, then I would love to work with you on this project. Please let me know if you can help. Thanks!

I have a project. I need you to set it up via anydesk. and teach me how to do it. 1. test doing it on your pc and account 2. let me know youve done it and can now do it on my pc 3. connect via anydesk and google meet call, to start setting up on my pc 4. make sure it works on my pc and answer questions i have

...SjYp_cLMo85q/pub?w=960&h=720 This would be network 1: Number of devices: -Router ISP bridged CGNAT. -NIC0 wired to the ISP router. -NIC1 wired to the switch. -Computer: Ubuntu 22.04.3 LTS Desktop. Needs an Ethernet connection to NIC0? -Hypervisor: Virtual Machine Manager 4.0.0. Needs 2 bridges, NAT to NIC0 and Isolated network to LAN? IPs on topology network diagram are current, but I would like host , KVM router 192.168.1.170. -KVM router: pfSense 23.05.1. -KVM OS: LinuxMint 21.2. Device configurations: Network 1: I have configured all devices, however have not built this with NIC0->KVM router. Network 2: I would like reconfigured so Internet if off if the KVM router if off.

Hey there, **LONG TERM PROJECT, READ BEFORE APPLYING** Looking for someone with good aesthetics for suggesting our developer ideas, providing Canva images etc for our website. Would also be responsible for creating a logo. The most important thing is Good Aesthetic. If you decide to apply, please start your application with “NAT”, also share your samples as those are the only messages we shall be replying to! Given the amount of applicants we get, we might also prefer applicants who design a demo logo for us. A bit about us: “We’re a private-tutoring company based out of Canada, we go by the name North American Tutors. Our USP is connecting students to highest quality tutors possible, coming out of the best schools possible. Our customers are students an...

No more money than your profile advertises and no ChatGPT. I am looking for someone to help me configure my network so that my computer can ping...guide me through the process. Network topology is not perfect so clearing up my understanding of the connections needed: Computer: Ubuntu 22.04.3 LTS Desktop. Needs an Ethernet connection to NIC0? Hypervisor: Virtual Machine Manager 4.0.0. Needs 2 bridges, NAT to NIC0 and Isolated network to LAN? IPs on topology network diagram are current, but I would like host , KVM router 192.168.1.170. KVM router: pfSense 23.05.1. KVM OS: LinuxMint 21.2. NIC0 wired to the ISP router. NIC1 wired to the switch.

Project Description: I am a beginner in network configuration and I am using a Linux computer system. I am looking for a step-by-step guide on how to configure my network so that my computer can successfully ping the KVM router and KVMs. Skills ...effectively to a beginner Details: Network topology is not perfect so clearing up my understanding of the connections needed: Computer: Ubuntu 22.04.3 LTS Desktop. Needs an Ethernet connection to NIC0? Hypervisor: Virtual Machine Manager 4.0.0. Needs 2 bridges, NAT to NIC0 and Isolated network to LAN? KVM router: pfSense 23.05.1. KVM OS: LinuxMint 21.2. NIC0 wired to the ISP router. NIC1 wired to the switch.

I'm looking for an experienced professional to help set up a SonicWall firewall for more than 50 devices. The ideal candidate will possess the necessary technical expertise to consult on and properly configure and setup my FIREWALL, 2 WAN with load balancing, NAT for 4, Vlan or 2 department interfaces. Additionally, the person will be responsible for making any necessary repairs and updates in order to ensure the protection of my network. Finally, I'm looking for someone who is customer-oriented, with excellent communication skills. This is a great opportunity for an individual or organization who is an expert in firewall technology and setup.

We are creating shirts for my work team's golf outing. Our manager calls herself Nat Da Rat and has agreed to provide a picture of herself to morph with Master Splinter to put on some shirts and other things for the team. Would like the rat to wear pink pants and look similar to the photo provided.

...network engineer who can implement a script in Java that can fetch all the devices' private IP addresses that are connected inside a wifi network and open a specific UPnP port. The script should be able to run on Linux operating system. Requirements: - Strong proficiency in Java programming language - Experience in network engineering and understanding of wifi networks - Knowledge of UPnP protocols and port forwarding - Familiarity with Linux operating system Responsibilities: - Develop a script in Java that can fetch all the devices' private IP addresses within a wifi network - Implement the ability to open a specific UPnP port using the fetched IP addresses - Ensure the script is compatible with Linux operating system Note: The script should be able ...

OpenVPN Server: on openWRT Router OpenWRT Router has a lan subnet: OpenVPN Subnet passed to clients: When I (client) connect to the OpenVPN Server: - I get assigned an IP for example - with a gateway IP: Avahi is running to forward mdns packets through to the OpenVPN which works. Problem: - All mdns traffic source is the gateway ip, 192.168.8.1. I want it to come from the original device IP from the LAN. See attached pictures.

I am looking for a freelancer who can help me set up high availability (HA) on my Juniper SRX 320 Firewalls. The...level of HA is Active/Passive. I already have an existing network topology that needs to be taken into consideration during the setup process. Additionally, I require the configuration of additional features such as VPN, NAT, and firewall policies. Ideal skills and experience for this job include: - Strong knowledge and experience with Juniper SRX 320 Firewalls - Expertise in setting up high availability (HA) in an Active/Passive configuration - Familiarity with existing network topologies and the ability to integrate the HA setup seamlessly - Proficiency in configuring VPN, NAT, and firewall policies If you have the necessary skills and experience, please bid...

We need our asterisk to play a small audio file to destination at the moment we receive 180 or 183 from destination. Destination provider needs 5 RTP packets to discover IP and port when asterisk is behind NAT.

We need our asterisk to play a small audio file to destination at the moment we receive 180 or 183 from destination. Destination provider needs 5 RTP packets to discover IP and port when asterisk is behind NAT.

...reaches the intended destination () but continues without receiving responses afterward. • Current setup utilizes an Edge Router with a NAT rule in place. • Traceroute reveals the ICMP packets reach the host, but subsequent hops time out. • The routing for pinging 10.10.x.13 is operational in a Juniper SRX system but not in the new Edge Router setup. Required Skills and Expertise: • Proficiency with Ubiquiti equipment. • VPN configuration and troubleshooting. • Edge Router configuration and diagnostics. • Overall expertise in Network Administration. Note: Successful project completion requires deep knowledge of routing protocols, NAT rules, and familiarity with both Juniper SRX and Edge Router setups. ICMP Responses are being dropped T...

...efficiently manage our IPv4 address resources and provide seamless translation services for our network, while also capturing detailed network traffic data for analysis. Key Requirements: CGNAT Implementation: Develop a custom CGNAT solution that allows multiple customers to share a pool of public IPv4 addresses. The solution should support both incoming and outgoing traffic translation, with proper NAT traversal. IP Address Management: Design and implement an IP address management system to dynamically allocate and track available public IPv4 addresses for customers. NetFlow v9 and IPFix Integration: Integrate both NetFlow v9 and IPFix technologies to capture detailed network traffic data, including source/destination IPs, ports, protocols, volume, and other relevant flow in...

...Python - Knowledge of cryptocurrency protocols and smart contracts - Familiarity with popular cryptocurrencies like Bitcoin and Ethereum - Experience in developing secure and scalable payment systems - Strong problem-solving and communication skills -Socket Programming Networking Concepts: A solid understanding of networking concepts, including protocols (TCP, UDP), IP addressing, port forwarding, NAT traversal, and socket programming is crucial for developing P2P communication. P2P Networking: Familiarity with peer-to-peer networking architectures, including various P2P protocols, overlay networks, and decentralized systems, is essential for designing and implementing the P2P aspect of the project. Distributed Systems: Knowledge of distributed systems concepts, including ...

I need to create a new page for multi-step form (wizard) using ASP.NET MVC. copy design from in the end of the process i need to save data to MySql. requirements: 1) work on GitHub 2) project should be only in ASP.NET MVC 3) db should be MySql 4) work should be simple and done in 24 hours 5) fixed price only