Need autocad drawings furniture need jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    19,064 need autocad drawings furniture need jobs found, pricing in USD

    I need a 3D model of furniture placed in a room

    $127 (Avg Bid)
    $127 Avg Bid
    35 bids
    Civil Engineering Drawings 6 days left
    VERIFIED

    I need the following Civil Engineering drawings: (1) Notice of Intent ( NOI) to TCEQ required. (2) Location and detail of all storm water pipe (3) Hydraulic Drainage Study; (4) Retention Pond Design for Storm Water; (5) Plat with utility and drainage easements identified; (6) Details of drainage inlets; (7) Domestic water needs ( size of line), as well

    $161 (Avg Bid)
    $161 Avg Bid
    9 bids

    ...here [login to view URL] I am finding it difficult to source quality SVG line drawings to draw with my plotter, so Part 1 of the project is to help me with this. I need a reliable process to turn images into SVG line drawings that can be drawn on my plotter, either using existing software solutions or a custom piece of software

    $95 (Avg Bid)
    $95 Avg Bid
    4 bids

    The main goal of this project is: Make textures of the furniture models from laser scanning. For texturing you have to use attached photos. For wooden parts you can use any similar available textures. There will be need to improve models like close holes, little bit of sculpting. List of items in this part: - Table with 8 chairs - set of 2x sofa with

    $175 (Avg Bid)
    $175 Avg Bid
    39 bids

    ...Protection Design and Consulting company with over 20 years trade experience. We are looking for a certified engineer in Ontario, Canada, to review and stamp fire protection drawings and backflow prevention submittals. We are not looking to “purchase” a stamp. We operate with integrity and professionalism. The right candidate will be familiar with NFPA

    $256 (Avg Bid)
    $256 Avg Bid
    2 bids

    ...architectural project sheets in a complete drawing set and a list of specification section from the project manual. The sheet names, date, spec sections and description, etc need to get populated into the word form. The entries in the form are just examples, and should be deleted, so the form is filled with only the sheets and specs from the pdfs. Drawing

    $23 (Avg Bid)
    $23 Avg Bid
    19 bids

    Will need to be stamped and approved for permitting in county of San Bernardino California, will be RV storage for a 45foot RV, with an attached 800sqft living quarters. I prefer contemporary/industrial designs, so I've attached some of the looks I like, this home will be built in a high desert so I would like it to fit in geographically.

    $333 (Avg Bid)
    $333 Avg Bid
    7 bids

    Furniture design - re-styling an existing fixed seat

    $706 (Avg Bid)
    $706 Avg Bid
    25 bids

    Need someone experienced to work with the project. I want someone who can work with 2D Vectors on Android app and with 3D on web. That is 2D drawings which will be made in android studio related to floor plans and later on exported and displayed only on the web in 3D. For More Information contact.

    $397 (Avg Bid)
    $397 Avg Bid
    9 bids

    ...surrounds and quartz vanity tops. You will need to learn our products and hotel brands requirements. (we will train) We will be sending you 5-10 hotel architectural plans every day. Your job is to review the architectural plans, measure from elevations and match our company's products based on the shop drawings we provided. This is a part-time to full

    $11 / hr (Avg Bid)
    $11 / hr Avg Bid
    36 bids

    ...who would be in a position to prepare hand made (not computer made) 18 drawings (illustrations) for a book on personal finanse management aimed at males/females age 18-25. Each illustration should match each chapter title (there are 18 chapters hence 18 drawings are needed). We need files in ai, tiff or eps file format. Each illustration in a separate

    $628 (Avg Bid)
    $628 Avg Bid
    89 bids

    Make 3 floorplans for porch (birdview, front and sideview) and the same drawings in autocad You must look at the attached file to read the project. Notice that the measurements are not finalized and you will need to change some of the measurements later. I will pay you USD 40.

    $96 (Avg Bid)
    $96 Avg Bid
    26 bids

    I need two drawings "cleaned up" with an eraser tool and something added to one of the drawings. $10 fixed price.

    $12 (Avg Bid)
    $12 Avg Bid
    35 bids

    ...is all about great design here and getting to the perfect UX. We need to have effective 'long-format' product pages that brings out the best in the product and allows a greater degree of variants. 3 general templates required - 1) Long format sofa 2) Long format general furniture 3) Short format High graphic design skill required, as well as Ruby

    $719 (Avg Bid)
    $719
    6 entries

    Would you be interested in creating shop drawings for us? This time we would need roof shop drawings for an SBS system. We have the DWG files and we just need to adjust them to our standards. Please let me know if you are interested. Then I'll send you the documents.

    $139 (Avg Bid)
    $139 Avg Bid
    72 bids

    We are seeking a copywriter with an experience writing product descriptions for ecommerce site. Specifically, we need a copywriter to revise/edit all product descriptions on our site. Our online store has over 1,200 skus. Proficiently in Microsoft Excel and Word preferred. I suggest you, if you don't live in North America, please don't apply.

    $115 (Avg Bid)
    $115 Avg Bid
    19 bids

    We are a UK based online e-commerce store supplying vintage home furniture. We are looking for a Facebook Ads expert that has proven to deliver results and able to provide valuable support to best optimise a conversion funnel. We are ideally looking for a professional company or a specialist that has a proven track record of results (not promise results)

    $207 (Avg Bid)
    $207 Avg Bid
    10 bids

    A client has selected some bespoke furniture which we need 1 plan (from above) and elevation (front and side) for -so that we can place them into our interior drawings. No 3D modelling required. Some of the dimensions have not been confirmed so we need them drawn as accurately as possible from the photos and we can re-scale them our end once the dims

    $156 (Avg Bid)
    $156 Avg Bid
    18 bids
    autocad drawing 3 days left

    2d Plan, working drawing, joinery, saintry and electrical drawing

    $18 (Avg Bid)
    $18 Avg Bid
    34 bids

    ...some bespoke furniture which we need plans and elevations for -so that we can place them into our interior drawings. No 3D modelling required. Some of the dimensions have not been confirmed so we need them drawn as accurately as possible from the photos and we can rescale them our end once the dims have been confirmed. The proportions need to be as correct

    $164 (Avg Bid)
    $164 Avg Bid
    19 bids

    Hello Everyone! We need a new logo for our brand - Operando. Operando make a industrial office furniture & equipment (coffee table, shelves, etc.). Requirements: -vertical and horizontal logos -thin font -additional profile graphics for facebook. The graphics will refer to furniture and office equipment.

    $50 (Avg Bid)
    Guaranteed
    $50
    82 entries

    Delivering revit files from supplied AutoCAD files

    $18 / hr (Avg Bid)
    $18 / hr Avg Bid
    74 bids

    We are polish, small company, produsing upholstery. Our brand is ower 10 years on a market. Our prducts are high quolity, up to date design, cosy and ergonomic. Most of our collections are modular. We looking for designers who create some new products for us. Enclosed three pictures of our collections

    $380 (Avg Bid)
    $380 Avg Bid
    9 bids

    Would you be able to start drafting up some elevations of the outside front and rear elevations for me based on the photos.

    $23 (Avg Bid)
    $23 Avg Bid
    43 bids

    We want to change our Autocad Architecture System from 2010 to 2019. We need help for getting all our enviroments, walls and texts to the new System.

    $124 (Avg Bid)
    $124 Avg Bid
    22 bids

    ...engineer/architect/interior designer to complete detailed design drawings for construction sets which include the following: 1) Partition Plan 2) Demo Plan 3) Finish Plan 4) Furniture Plan layout 5) Reflected Ceiling Plan 5) Elevations and Section drawings Must be proficient in AutoCAD and must have experience in construction drawing sets for commercial

    $9 / hr (Avg Bid)
    $9 / hr Avg Bid
    39 bids

    ...auto cad i just want the drawings adjusted slightly, but i also need the tee piece drawn up on auto cad, and then all 4 disks and the tee piece 3d modeled so they can be printed out on 3d printer.(total of 6 parts) - I will need to work with you on design and give you measurements as they need to be exact. - I will also need to make sure they will

    $35 (Avg Bid)
    $35 Avg Bid
    13 bids
    patent drawings 3 days left
    VERIFIED

    I have 2D vector CAD drawings that need to be cleaned up and prepared for patent drawings. approximately 10 drawings plus 1 drawing made from a photo. only people with prior design patent drawings or design patent illustration knowledge.

    $140 (Avg Bid)
    $140 Avg Bid
    15 bids
    AutoCad drawings 3 days left

    I am studying the 3 main Pyramids of Giza and hope to write a book about them. I firstly want 2D AutoCAD drawings that highlight key dimensions. I have these for the Khufu (Cheops) Pyramid on a XL Spreadsheet. I want to highlight the inherent geometrical patterns by using different colored lines but this involves a large area outside the structure also

    $13 / hr (Avg Bid)
    $13 / hr Avg Bid
    62 bids

    I retail sofas. I need clients to easily see what a chairs looks like, two seater, three seater etc. Line drawing, birds eye view. Rough hand drawn sketch provided.

    $8 / hr (Avg Bid)
    $8 / hr Avg Bid
    24 bids

    I am going to send you pictures with details of how I want the website to be like. I have five furniture houses in different countries and I want each of them to be on the website all existing independently with payment options and a blog

    $727 (Avg Bid)
    $727 Avg Bid
    27 bids

    ...engineer/architect/interior designer to complete detailed design drawings for construction sets which include the following: 1) Partition Plan 2) Demo Plan 3) Finish Plan 4) Furniture Plan layout 5) Reflected Ceiling Plan 5) Elevations and Section drawings Must be proficient in AutoCAD and must have experience in construction drawing sets for commercial

    $319 (Avg Bid)
    $319 Avg Bid
    55 bids
    CAD drawings 3 days left

    I need three three simple CAD drawings done. Two are different, with the third being a mirror of one of the other two. To be eligible for this job, you must be able to screen share and engage in audio conversation. Please quote "chamfer" in the first line of any reply.

    $111 (Avg Bid)
    $111 Avg Bid
    11 bids
    Trophy icon CAD drawings 2 days left

    I need three three simple CAD drawings done. Two are different, with the third being a mirror of one of the other two. To be eligible for this job, you must be able to screen share and engage in audio conversation. Please quote "chamfer" in the first line of any reply.

    $64 (Avg Bid)
    $64
    13 entries

    My business partners and I started a custom furniture/decor business. The website has been developed and we are in the process of adding all of the pieces to the website and a number of other websites. We need product descriptions that written that draw the consumer in and describe the quality of the craftsmanship. The successful descriptions would

    $288 (Avg Bid)
    $288 Avg Bid
    31 bids

    I need 10 line drawings done.. just need to outlines main lines.. line thickness 0.50mm then positioned inside a 34mm diameter circle MESSAGE ME TO START NOW

    $31 (Avg Bid)
    $31 Avg Bid
    28 bids

    We need several drawings done for an office furniture line. We currently have some done so the new ones will need to match. There are 4 colors and many configurations. We need a freelancer that has a fast turn around time and is very proficient in furniture renders. Attached are some that are already created. I will create a milestone for a freelancer

    $145 (Avg Bid)
    $145 Avg Bid
    62 bids
    Autocad blue print 2 days left
    VERIFIED

    I need someone to help me draw blue prints for a factory

    $133 (Avg Bid)
    $133 Avg Bid
    42 bids

    ...professionally managed company with highly technical background. We takeup challanging projects and execute them to client's satisfaction. This is an ongoing work and we need a person who can be associated with us for next few years. It may not be necessary to come to our factory. Once a system / trend is establised, you can work from home also.

    $20 (Avg Bid)
    Local
    $20 Avg Bid
    3 bids
    Autocad plans for home 2 days left
    VERIFIED

    I am putting together an idea for a dream home. I have some ideas sketched up and would like to have them put into a DWG file so I can add and change them as I please. Just a 2d model.

    $26 (Avg Bid)
    $26 Avg Bid
    75 bids

    Would like a machine drawn up so we can then get all componentry laser cut. We will supply all sizes that we would like drawn and all hardware included.

    $276 (Avg Bid)
    $276 Avg Bid
    106 bids

    We are in online furniture selling, want to build a mobile app

    $294 (Avg Bid)
    $294 Avg Bid
    25 bids

    I am looking for an Expert/Experienced Auto-CAD Designer to help sketch my concept, design and showcase a 3D version of the product as well as suggest the best textile options. I am looking for someone who can create this concept and be able to meet the desired details based on the functionality of the product. I have uploaded pictures to give an idea of what this product would be doing. You wil...

    $208 (Avg Bid)
    NDA
    $208 Avg Bid
    19 bids

    I am putting together an idea for a dream home. I have some ideas sketched up and would like to have them put into a DWG file so I can add and change them as I please. Just a 2d model.

    $39 (Avg Bid)
    $39 Avg Bid
    21 bids

    I need line drawings done outlines main lines ..14 total and 10 line drawings edited to make line thickness 0.50mm all drawings need to be 0.50mm in line thickness and put inside a 34mm diameter circle.. PLEASE MESSAGE ME TO START NOW need done today and tomorrow more designs every week..

    $39 (Avg Bid)
    $39 Avg Bid
    37 bids

    We need the design by a structural engineer, using AutoCAD, of a retaining wall using geocells, geogrids and geotextile, based on a topographic survey, taking into account all vectors, topography of the field, seismic risks, etc. Width of 50 meters and high of about 15 meters. 8 Drawing profile sections to be delivered with all volume of material required

    $374 (Avg Bid)
    $374 Avg Bid
    27 bids
    Trophy icon Logo Designing for Furniture Store 22 hours left

    *Business Name - Complete Furniture* This is a UK based High Street furniture store who sell Sofa's, Bed's, Wardrobes, Tables, Chairs. Minimal, Modern and Clean looking Logo needed for the shop front and Website. [login to view URL]

    $90 (Avg Bid)
    $90
    126 entries

    I need basic drawings that will get me by for permitting and pricing for a new campground in Walsenburg Colorado. City water runs through the site on the east side. see sketch from survey, blank survey and topographical map. On the sketch the likely location of the water line is the red line on the east side of the property (right side of image) it's

    $5312 (Avg Bid)
    $5312 Avg Bid
    33 bids

    Modify 2-D AutoCAD files to reflect as built changes for elevations and plan view. Drawings are for residential kitchen, bar and media room. PDF of changes needed is attached. DWG files are available in AutoCAD 2016 and 2018 versions.

    $348 (Avg Bid)
    $348 Avg Bid
    26 bids