Panoramic image stitching matlab simulink jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Skills
Languages
    Job State
    3,883 panoramic image stitching matlab simulink jobs found, pricing in USD

    ...Windows . We have developed an algorithm in Matlab to determine LF/HF ratio from a pre-recorded dataset of heart rate/PPG values. We now need this algorithm to work in real time. We are taking in the PPG values with an Arduino and connected Pulse Sensor. We have tried connecting Matlab to the Arduino via Simulink with no luck due to inexperience. Don’t

    $88 (Avg Bid)
    $88 Avg Bid
    1 bids

    Looking for an expert in Matlab that can deploy a deep learning matlab script to webserver connected to web frontend. It might include conversion of the script to another language that will be easier to implement. Or use another language that picks up the model produced in matlab and displays the same result. Or even include simulink. However, the first

    $116 (Avg Bid)
    $116 Avg Bid
    6 bids

    Looking for an expert in Matlab that can deploy a deep learning matlab script to webserver connected to web frontend. It might include conversion of the script to another language that will be easier to implement. Or use another language that picks up the model produced in matlab and displays the same result. Or even include simulink. However, the first

    $76 (Avg Bid)
    $76 Avg Bid
    9 bids

    Matlab simulink Transfer function technical writing

    $57 (Avg Bid)
    $57 Avg Bid
    21 bids

    ...High Speed Photography, Night Photography, Long Exposure, Motion Blur, B&W Photography, Monochromatic Color Photography, Smoke & Fire Art Photography, Macro Photography, Panoramic Photography, Traffic Light Trails, Light Painting, Silhouettes, Vintage Photography, Zoom Blur Effect and Kinetic Photography. I have a couple of images attached to this

    $399 (Avg Bid)
    $399 Avg Bid
    10 bids
    Matlab simulink and code file 3 days left
    VERIFIED

    I want to have design attached schematics in simulink model and generate matlab code for my project. Only people having good hands on practice and can do in low price bid. Work should not take more than 2-3 hrs. In case needed few more showing some progress.

    $29 (Avg Bid)
    $29 Avg Bid
    20 bids
    Simulink simulatiom 2 days left
    VERIFIED

    I want only add a compressor, i have a Picture of the systems

    $21 (Avg Bid)
    $21 Avg Bid
    10 bids

    ...to use Inventor) but if it is not software specific then it's better. >> For computer aided engineering (CAE), we can use Autodesk Inventor and fusion 360, Autodesk CFD, MATLAB, software developed in-house for each project, COMSOL multiphysics and ANSYS multiphysics/workbench (but if we can avoid mentioning specific software too much is better).

    $490 (Avg Bid)
    $490 Avg Bid
    6 bids

    I have a video taken using a device. That device gives narrow field view images. I would like to take that video and create a wide view image using image stitching. Also included in this project is local feature tracking such as KLT & SIFT which can be of help.

    $235 (Avg Bid)
    $235 Avg Bid
    20 bids

    ...DENIER black fabric on the outside and heavy canvas lined black inner. Only one pocket is required unlike the double as shown in this item. It is VERY IMPORTANT that all the stitching and trimming is an exact quality match, anything less than this standard will be rejected. The feel and rigidity must be a match to this pouch and the backing have the same

    $26 - $331
    $26 - $331
    0 bids

    the project is a well-designed resort with high-level luxury apartments, which provide adequate infrastructure for a cozy, quiet, isolated experience, with a stunning panoramic view of the Mediterranean sea on the island of Crete. we do not wish to be characterized as a typical Greek design-oriented, but cosmopolitans. the suggested name and its 2

    $174 (Avg Bid)
    Guaranteed Top Contest
    $174 Avg Bid
    320 entries

    ...into the women's fashion industry. Looking to launch the range towards the end of the year and in search for a fashion designer who can work with me to design and produce stitching templates for multiple sizes and come up with illustrative designs. Preference for someone based in London, also great to work with someone in person to brainstorm to develop

    $269 (Avg Bid)
    $269 Avg Bid
    14 bids

    The attached 'Master Pic' panoramic photo is of a main concourse of an airport. we need to place some mock-up, "Advertise Here" advertising panels on the walls at the designated panels along the wall area, as per the mock image 'Proposed signage' attached. Use any parts of my "Sample Material" to create visual mock-ups on the designated panels ...

    $10 (Avg Bid)
    Guaranteed
    $10 Avg Bid
    11 entries

    ...detailed to achieve photorealistic rendering - The interior must look modern and luxury. Requirement: - Compatible 3Dsmax 2016 - Modeling for photo realistic rendering (stitching, wrinkle on fabric, dress...) - System unit; 1 unit = 1 cm - Quad poly Modeling (clean one, no Boolean, no tri poly, no double vertex, no overlap surface...) - Keep the smoothing

    $169 (Avg Bid)
    $169 Avg Bid
    19 bids

    ...YOUR PRICE. Hey, looking for a freelancer with good modeling skill and imagination to model the image attached "[login to view URL]"(imagination to model what is not visible). The 3D model must be extended and some surrounding must be model too, beyond the ref image to be able to :change a little the shooting angle, wider lens and of course to get the model in

    $441 (Avg Bid)
    $441 Avg Bid
    8 bids

    I need some changes to an existing magento website. Add cash on delivery option for specific products Autom...some changes to an existing magento website. Add cash on delivery option for specific products Automatically reindexing(apart from the default option in magento) Size and stitching options for indian ethnic wear Few smaller tasks on the site

    $110 (Avg Bid)
    $110 Avg Bid
    18 bids

    I need to implement a simulink model. an individual having a knowledge of MMPT Controller can apply. more details will be given in private

    $106 (Avg Bid)
    $106 Avg Bid
    22 bids

    ...v=zP8In62eu0Y - We want an unlimited number of phones to be able to used and to be stitched together - Options for different zooms from each phone - Setup backend to setup stitching and video to be shared - Overlay sharing from base station app - Share via email or sms Start your proposal with the word BULLET - I want you to give me an idea of this

    $169 (Avg Bid)
    $169 Avg Bid
    4 bids

    ...v=zP8In62eu0Y - We want an unlimited number of phones to be able to used and to be stitched together - Options for different zooms from each phone - Setup backend to setup stitching and video to be shared - Overlay sharing from base station app - Share via email or sms Start your proposal with the word BULLET - I want you to give me an idea of this

    $393 (Avg Bid)
    $393 Avg Bid
    42 bids

    I need you to develop some software for me. I would like this software to be developed for Windows . Take live video from a webcam and stitch directly into a panoramic image file similar to what you see here: [login to view URL]

    $2727 (Avg Bid)
    $2727 Avg Bid
    18 bids

    I need a responsive website. I would like it designed and built. The site will offer shoppers to select design, material, finish, inner lining, buttons, stitching, vent, packing etc. An idea can be taken from [login to view URL]

    $550 (Avg Bid)
    $550 Avg Bid
    79 bids

    Model DC microgrids witg Droop control , enhance current sharing and voltage regulation using simulink.

    $135 (Avg Bid)
    $135 Avg Bid
    14 bids

    Brigade Woods – A premise with a Fontaine of artistic landscapes and residential formations is brought to you by Brigade Groups. This venture is located in green panoramic locale Whitefield, Bangalore. The project offers luxurious apartments of different sizes viz., 1, 2, 3 and 4 BHK residential units with area ranging between 2000 sqfts to 6000 sqfts

    $26 / hr (Avg Bid)
    $26 / hr Avg Bid
    15 bids

    -Need to model a 3 phase induction motor with its speed controller in simulink -Fractional order PID controller will be used (5 parameters Kp Ki Kd, mu, lamda) -motor power is 10kw -Time taken from speed input to steady state under 25% 50% 75% 100% load conditions is the output of interest -A 2-3 pages report commenting the results and comparing them

    $151 (Avg Bid)
    $151 Avg Bid
    20 bids

    Model DC microgrids witg Droop control , enhance current sharing and voltage regulation using simulink.

    $154 (Avg Bid)
    $154 Avg Bid
    19 bids

    A DC micro grid has to be designed for specific loads. Input source is wind energy and it has to be run by a brush less DC motor with sinusoidal wave forms of ba...energy and it has to be run by a brush less DC motor with sinusoidal wave forms of back emf. Wind turbine is also needed to be simulated. The whole project is to be done in MATLAB/SIMULINK.

    $119 (Avg Bid)
    $119 Avg Bid
    9 bids

    Model DC microgrids witg Droop control , enhance current sharing and voltage regulation using simulink.

    $246 (Avg Bid)
    $246 Avg Bid
    10 bids

    Edit Video Stitching untuk Digital (media sosiak) dan Cinema

    $1800 (Avg Bid)
    $1800 Avg Bid
    1 bids

    ...to use Inventor) but if it is not software specific then it's better. >> For computer aided engineering (CAE), we can use Autodesk Inventor and fusion 360, Autodesk CFD, MATLAB, software developed in-house for each project, COMSOL multiphysics and ANSYS multiphysics/workbench (but if we can avoid mentioning specific software too much is better).

    $525 (Avg Bid)
    Featured Urgent
    $525 Avg Bid
    17 bids

    I need to build a Simulink control model to compensate the voltage sag of sensitive loads as in the attached paper figure. 4

    $21 / hr (Avg Bid)
    $21 / hr Avg Bid
    18 bids
    Matlab Project Ended
    VERIFIED

    Scotch yoke mechanism, slot based slider and bicycle gear should be design on matlab simulink sim-mechanics.

    $20 / hr (Avg Bid)
    $20 / hr Avg Bid
    23 bids

    matlab program program program bid only for matlab experts

    $31 (Avg Bid)
    $31 Avg Bid
    11 bids

    Hey, looking for a freelancer with good modeling skill and imagination to model the image attached (imagination to model what is not visible), . The 3D model must be extended and some surrounding must be model too, beyond the ref image to be able to use other shooting angle (always facing back) anyway. Like 3 meters extended modeling is enough. The

    $125 (Avg Bid)
    $125 Avg Bid
    20 bids

    Hey, looking for a freelancer with good modeling skill and imagination to model the image attached (imagination to model what is not visible), . The 3D model must be extended and some surrounding must be model too, beyond the ref image to be able to use other shooting angle, wider lens and of course to get the model in the mirror.... Like 1 meters

    $94 (Avg Bid)
    $94 Avg Bid
    17 bids

    I would like help completing a project; I would like to see how someone else would first, design controllers and simulate ...implement your controllers on this system, and analyse differences in performance. I can provide examples and further information - what is mostly needed is knowledge of LabView/MATLAB, as well as some knowledge of the system.

    $24 (Avg Bid)
    $24 Avg Bid
    14 bids

    Hi there, The task is to implement the mine blast algorithm(Optimization algorithm) on a Solar system Simulink model for maximum power point tracking and to maximize the power.

    $158 (Avg Bid)
    $158 Avg Bid
    17 bids

    need to stitch two images within 50milliseconds and without any seaming.

    $25 (Avg Bid)
    $25 Avg Bid
    6 bids

    1. The project is asked to solve four ordinary differ...solve four ordinary differential equation showing the steps 2. find the transfer functions to be able to do the simulink and Matlab 3. apply the simulink and Matlab 4. JUST SHOW THE STEPS OF SOLVING THE ODEs + INSERT SIMULINK & MATLAB FILES (Chemical Engineering - Process Dynamics and Control)

    $46 (Avg Bid)
    $46 Avg Bid
    27 bids

    I need a expert for my current projects. If you have knowledge please bid. Details will be shared in message with the freelancers.

    $38 (Avg Bid)
    $38 Avg Bid
    20 bids

    I need a expert for my current projects. If you have knowledge please bid. Details will be shared in message with the freelancers.

    $32 (Avg Bid)
    $32 Avg Bid
    12 bids

    ...services: - Modeling and Simulation in engineering and applied physics - Optimization - Multiphysics Analysis We prefer to use the Autodesk family of products, MATLAB and Simulink, COMSOL Multiphysics, ANSYS Multiphysics, discipline specific software and software developed in-house. But the content, if possible, should be software independent (without

    $93 (Avg Bid)
    $93 Avg Bid
    4 bids

    I have three videos that need to be stitched together, add music, and subtitles. I will provide the music, subtitles, and the videos

    $31 / hr (Avg Bid)
    $31 / hr Avg Bid
    37 bids

    I would like to perform stitching of images (around 15-20 images) vertically, using the [login to view URL] already got the coordinates that we need to put for each images (and they need to overlay a little bit on top of each other) If we stitch those images manually in Photoshop, the final dimension would be 6000x61900. This has to be automated by developing

    $134 (Avg Bid)
    $134 Avg Bid
    20 bids

    ...following services: - Modeling and Simulation in engineering and applied physics - Optimization - Multiphysics Analysis We prefer to use the Autodesk family of products, MATLAB and Simulink, COMSOL Multiphysics, ANSYS Multiphysics, discipline specific software and software developed in-house. But the content, if possible, should be software independent (without

    $139 (Avg Bid)
    $139 Avg Bid
    31 bids
    matlab expert needed Ended
    VERIFIED

    matlba lab expert needed should have knowledge of Ground truth labeler app like simulink. i have work related to image processing.

    $26 (Avg Bid)
    $26 Avg Bid
    9 bids

    ...services: - Modeling and Simulation in engineering and applied physics - Optimization - Multiphysics Analysis We prefer to use the Autodesk family of products, MATLAB and Simulink, COMSOL Multiphysics, ANSYS Multiphysics, discipline specific software and software developed in-house. But the content, if possible, should be software independent

    $384 (Avg Bid)
    $384 Avg Bid
    8 bids
    $21 Avg Bid
    3 bids
    $156 Avg Bid
    16 bids

    The world's first ever Flying Restaurant in a Boeing 747 aeroplane with panoramic views looking below and on all sides. A fully functional flying 5-star restaurant in the clouds/sky The name of the restursunt/airline will be "Elevation 92" All black in color, with an aurora borealis type design.

    $395 (Avg Bid)
    $395 Avg Bid
    41 bids

    Use MATLAB to model engineering systems and design, implement, and test controllers to modify their closed-loop behaviour. Use of MATLAB and/or Simulink to complete a series of control-based problems. Detailed project brief would be provided when the discussion starts.

    $58 (Avg Bid)
    $58 Avg Bid
    10 bids