Pcb allegro tutorial jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    47,493 pcb allegro tutorial jobs found, pricing in USD
    Matching network 6 days left

    Can you calculate a matching network for Bluetooth (2.4 GHz) and GNSS (1559-1610 MHz) using lgnion MXTEND DUO NNO3-320 antenna? PCB length and width (mm) - 60*15 mm.

    $47 (Avg Bid)
    $47 Avg Bid
    2 bids

    I have a Custom Mechanical Keyboard which has switches soldered into a PCB by two solder joints. As I have little experience Desoldering I was looking for someone on here who could do a good job Desoldering the board and sending the two parts back separately.

    $16 (Avg Bid)
    $16 Avg Bid
    2 bids
    FreeRTOS coding 6 days left
    VERIFIED

    I have a PCB board with esp32 and mfrc522 and sim800c. There is some coding using Arduino to do some tasks and the rest of code is not yet coded to functional the mfrc522 and sim800c. I'm looking for a freelancer who have a good knowledge about coding the rfid mfrc522 and sim800c using freeartos to communicate with a server by sending the rfid number to a server via the sim800c and get back the result to complete the rest of the code which is ready.

    $105 (Avg Bid)
    $105 Avg Bid
    9 bids

    Electronic toy pcb I want to build

    $230 (Avg Bid)
    $230 Avg Bid
    10 bids

    ...important to detect people and cars when stationary and mobile while filtering out stationary objects. Once a person/ car is detected, it will activate a "flat coin vibration motor". What will be powering the device is a lipo battery, I need an LED to be red when the battery is less than 20% and green when above 80%. I need CUSTOM pcb antennas for the radar sensor to be on the pcb with the micontrollers controlling the sensor, vibration motor, battery, and LED. I need PCB design, antenna design, and software done. This device needs to be as compact and light weight as possible. Attached below is a Garmin Varia sensor which is the design and compactness that I am looking for, however I want to detect PEOPLE along with cars. I want the same detection range ...

    $2832 (Avg Bid)
    $2832 Avg Bid
    15 bids

    We have a designed PCB which requires the following changes 1. Replace connection header with through hole type connector 2. Move the labelled component inward into the PCB 3. Replace 2x White LED with single White LED at the center.

    $74 (Avg Bid)
    $74 Avg Bid
    2 bids
    PCB design 5 days left
    VERIFIED

    Design a PCB for a circuit design.

    $267 (Avg Bid)
    $267 Avg Bid
    30 bids
    PCB SEO articles 5 days left

    PCB SEO articles about 9 piece and 13500 words

    $130 (Avg Bid)
    $130 Avg Bid
    39 bids

    Hi I am also PCB designer I want some help~ Please send me Altium designer library.

    $250 (Avg Bid)
    $250 Avg Bid
    1 bids

    We are looking for a long-term partner to record videos in HD that will be used as tutorial videos for things such as topics such as software installation on windows and Linux (server access will be provided when needed) Please quote on 5-minute videos, some will be much shorter but the maximum will be 5 minutes on average This is a long-term partnership, so no stupid prices, only submit bids you will keep. Do not submit low bids then waste my time talking and have a sudden price increase

    $23 (Avg Bid)
    $23 Avg Bid
    18 bids

    I need a designer who is able to design the PCB for me

    $161 (Avg Bid)
    NDA
    $161 Avg Bid
    27 bids

    I am looking for a complete wordpress tutorial course with complete elementor page builder. The course should be start from scratch to advance where every thing should be covered including ecommerce website.

    $53 (Avg Bid)
    $53 Avg Bid
    6 bids
    Waveform Generator 4 days left
    VERIFIED

    I require a programmer to develop both firmware and GUI for a waveform generator using AD9106 and STM microcontroller You must have relevant experience in device programming along with schematic and pcb design. Fusion 360 access desirable More information will be given to suitable applicant for this project.

    $559 (Avg Bid)
    $559 Avg Bid
    18 bids

    Hi Hassan A., I have an Allegro .BRD file that I want to import into Altium. I have Altium but I do not have Allegro) Can you convert the BRD file to ALG or even better convert .BRD file to Altium .PCBDOC file?

    $20 (Avg Bid)
    $20 Avg Bid
    1 bids
    Copy a USB hub PCB 4 days left
    VERIFIED

    I have a pcb from a usb hub, which I can send you a photo of. I need to have a gerber file of this board and probably a few modifications done to it. This pcb the will then need to be produced, so the gerber file needs to be made with production in consideration. If you need any details, I will of course try to provide as much as I can, but I only have a real board and the specifications for the ports.

    $1040 (Avg Bid)
    $1040 Avg Bid
    36 bids

    Hi guys, Looking for someone to complete my pcb design. I have an 90% completed circuit schematic file for ESP32-S3 and GD32E503RET6 which needs to be routed and error corrected for PCB fabrication. The board contains barometer ic , Gyroscope+accelerometer ic,shunt resistor. Would send the .sch file and footprints and share more details there.

    $16 (Avg Bid)
    $16 Avg Bid
    7 bids
    Decision Tee Expert 4 days left
    VERIFIED

    ...building the tree and testing it, you must first create a data definition and training files. To do this use the spreadsheet: Download See (Links to an external site.) for directions on how to set up your .names, .data, and .test files. The .names file you will need to create following the examples given in the tutorial, but for the data represented in the spreadsheet. Excel should be able to produce a comma separated data and test files using the SaveAs feature. The diagnosis appears in the last column and other data you can use is in the other columns. It is up to you to decide which columns of data to use, but you must use at least 4. Try this exercise first without using the Blood Sugar values as one of

    $137 (Avg Bid)
    $137 Avg Bid
    19 bids

    Hello Concerns, We want to develop a Wifi + RF-based CCT and RGB Controller module. Microcontroller-based, it should be an industrial grade it is not a DIY project. PCB Size will be 80MM*60MM. Please refer to the attached block diagram.

    $109 (Avg Bid)
    $109 Avg Bid
    3 bids

    I would like to create a temperature and humidity sensor based on the esp12f and the SHT31 chips alimented by 2 AA batteries. The components must ALL be on one side of the PCB but the PCB can have tracks on two sides. The PCB should not cover the esp12f antenna and the SHT31 should be placed far away from the antenna. The size of the PCB should be kept to a minimum. The cables of the battery holder are soldered by hand to the PCB. The deliverable are the PCB designs and the BOM in Gerber format and the associated source files. Here are the pin connections for the ESP12F: - GPIO16 should be connected to RESET. - EN/CH_PC pin should be pulled-up with a 10kOhm SMD resistor. - GPIO15 pin should be pulled-up with a 10kOhm SMD resistor. - There should...

    $76 (Avg Bid)
    $76 Avg Bid
    9 bids

    I need someone who can help me to design my product i have some pcb and android screen we need someone who can design my product

    $80 (Avg Bid)
    $80 Avg Bid
    17 bids

    Looking for a multi-talented engineer to help with various hardware development/support tasks for the IoT industry. -Circuit design, schematic design -PCB design, troubleshooting, and rework -Firmware programming (nRF52, ESP32, MSP430, (RAK4630 a plus)) -Software programming (Embedded C, Assembler , python,) -IoT RF connectivity (WiFi, cellular, BLE, LoRa/LoRaWAN, MQTT) -IoT sensor connectivity (SPI, I2C, RS-232, RS-485, Modbus, etc) -3D modeling software (Fusion 360) -Design for manufacturing

    $957 (Avg Bid)
    $957 Avg Bid
    14 bids

    Looking for a multi-talented engineer to help with various hardware development/support tasks for the IoT industry. -Circuit design, schematic design -PCB design, troubleshooting, and rework -Firmware programming (nRF52, ESP32, MSP430, (RAK4630 a plus)) -Software programming (Embedded C, Assembler , python,) -IoT RF connectivity (WiFi, cellular, BLE, LoRa/LoRaWAN, MQTT) -IoT sensor connectivity (SPI, I2C, RS-232, RS-485, Modbus, etc) -3D modeling software (Fusion 360) -Design for manufacturing

    $12 / hr (Avg Bid)
    $12 / hr Avg Bid
    18 bids

    ...available on the website only. All information you can take only from the company website without that doesn't take any information from the directory site. it is first priority. My Budget is 1k for 10$ Total Data Now: 33k After Successful Coming: 180k It is a big Project. Note: I can not create any milestone After the client accepted your work You must pay. Check my Review for sure. Download video tutorial : If all conditions are ok please bid or ignore Step 1: search company name with then if you find the company website then put all information which is available. Step 2: If you can not find the company website then look company directory site to gather some info from our company. These two directory

    $5 / hr (Avg Bid)
    $5 / hr Avg Bid
    34 bids
    PCB Design 4 days left
    VERIFIED

    Industrial PCB design must have knowledge on Arduino and STM microcontroller and IOT module like EPS32 , Temperature module Communication module.

    $102 (Avg Bid)
    $102 Avg Bid
    19 bids

    I am trying to learn how to create a smart contract for a token with tokenomics (devFee, marketingFee, autoLP, etc) but I can't find any tutorial over internet. Please don't spam over here. Bid only if you can explain and help me learn these concepts frankly.

    $13 (Avg Bid)
    $13 Avg Bid
    1 bids

    Clipper Shape Innovations - Barber use - Sell in European and USA market - Standard Internal Parts: Knife, Battery, Motor,( refer to files ) - PCB board can change size We need : 1st part : market research for competitors advantage , shortage and missing points; user experience , barber’s journey map use the clipper ; CMF trends in Europe and USA. Mood board and recommend design directions. 2nd part : 3 idea with different Shape , can be very nice Sketches with color , 3D and Rendering are preferred( 60% above similar Looking would be consider as 1 idea ) 3rd part : one selected idea the rendering and CMF and size Above each steps finished, we can pay afterwords once we are satisfied.

    $434 (Avg Bid)
    $434 Avg Bid
    14 bids

    Camera eye tracking system when a person get sleep buzzer get on and relays active mode Type c cable charger used

    $18 / hr (Avg Bid)
    $18 / hr Avg Bid
    6 bids

    This project is a small phase of a much larger project. This is phase 1 of 40. This first phase is to based on the YouTube tutorial by The Net Ninja named Firebase Auth Tutorial. We require a usr signup registration page, a login page, recovery of forgotten password feature, social media sign in/up options with Google or Facebook accounts, and a user management admin back end. The Signup credential required will be first name, last name, email address, mobile phone number, and password. On the back end and user management there will be two unique details for each user that will be set manually by the admin/manager after a users signs up and is registered, as follows: User Access Level: Guard, Security Compnay, Manager, Admin , Land Owner, Guest, Energy Operator, and R...

    $21 / hr (Avg Bid)
    $21 / hr Avg Bid
    19 bids

    1. There are already textures for clothes (jpeg and 3D), you need to use ready-made textures. 2. It is necessary to use ready-made software, for example Spark AR. 3. Using the software (2), use ready-made textures (1) and create an AR filter from them to look like a body movement. when using the smartphone ca...help of body movement tracking, I can see the applied clothing textures (1) on the person. Important: you do not need to create textures, I will provide everything for you. The filter is similar to instagram and snapchat filters, only in this case you need to use your own textures. Priority will be given to the performer with experience in similar work (portfolio must be provided). Here is tutorial i need almost same, but with my textures!

    $473 (Avg Bid)
    $473 Avg Bid
    13 bids

    Hi vijayanandraj rajan, I noticed your profile and would like to offer you my project. We can discuss any details over chat.

    $35 (Avg Bid)
    $35 Avg Bid
    1 bids

    Hi, want to develop an Arduino project with 2 displays (TFT touch display and LCD) Description: The user will input the number that should show in the LCD display. After entering the number click on Enter key and show the QR code in another display (TFT display)

    $6 / hr (Avg Bid)
    $6 / hr Avg Bid
    13 bids

    I'm looking to design an RF PCB board. - Frequency = 1.4994347 GHz - Power supply input (2000v, 1amp) DC. - Spark Gap. - Transmitter circuit (Capacitors & inductors). - Antenna matching network (Capacitors only). - Antenna outlet (Coaxial cable connection).

    $1095 (Avg Bid)
    $1095 Avg Bid
    25 bids
    Water pump control board 3 days left
    VERIFIED

    Hello, I am looking for someone to design a PCB board to control a small electric water pump. The pump will turn on for 2-3 seconds every 30-60 seconds and will check for water. If the electric pump has a load on it (from water) the pump will stay on until the load is no longer present. I would like this to use a microcontroller so we can reprogram and change the check time (anywhere from 30-60 seconds). Thanks

    $423 (Avg Bid)
    $423 Avg Bid
    54 bids

    It is a HW development that consists of implementing a multiplexer in an existing circuit. Files of this circuit will be provided (circuit with microcontroller, wireless module and power supply circuit). PCB has a specific shape that also will be provided. Technical details have been provided previously.

    $39 (Avg Bid)
    $39 Avg Bid
    1 bids

    The Job Overview We are seeking an experienced content writer to help improve the effectiveness of our website and marketing materials. In this role, the ideal candidate will have a passion for writing and possess strong written communication skills. You will work with a team of marketers to help generate sales leads and improve the quality of our website’s content. You will be responsible ...

    $334 (Avg Bid)
    $334 Avg Bid
    43 bids

    ...with marketer and promotion teams Work with analysts to ensure messaging is consistent across the company Job Qualifications and Skill Sets Below are the qualifications expected of a copywriter: A bachelor’s degree in electrical engineering, marketing, communications, journalism, English, or a related field Familiarity with the manufacturing and design of Printed Circuit Board(PCB) Strong editorial, proofreading, and writing skills Experience with SEO copywriting best practices Excellent interpersonal, verbal, and written communication skills Ability to manage multiple projects and meet deadlines Passion for writing with an excellent portfolio of work...

    $310 (Avg Bid)
    $310 Avg Bid
    31 bids

    You should know about PID control, PLC Programming, HMI, PCB design. We are building Integrated Production System.

    $9 / hr (Avg Bid)
    $9 / hr Avg Bid
    10 bids

    I am looking to build simple (buy/sell) near nft market place cloned

    $171 (Avg Bid)
    $171 Avg Bid
    29 bids

    I have PCB i want someone who can simply copy it and make a gerber file or one who can make schmatic

    $272 (Avg Bid)
    $272 Avg Bid
    30 bids

    to illustrate 1st order 1st degree ODE in details with life applications

    $19 (Avg Bid)
    $19 Avg Bid
    10 bids

    For a film/cinema account on TikTok, we need a 1.12min video made using the ‘Run Boy Run’ trend. You can see an exact example of the required video here: A tutorial on how to make the video on CapCut here: We will supply all text and photos, the video just needs to be made in CapCut to look and sound exactly like the video in the first link here.

    $92 (Avg Bid)
    $92 Avg Bid
    32 bids

    ...the game with powers given to players. Players should be given option to change the background colours of the game platform. Players should also be given options to select or deselect different categories of tasks on the basis of which the game has to be Played. All the tasks mentioned here are only for the Second and Third Levels paid version of the game. 8) After that you have to make a game tutorial in the game where players can learn how to complete all the tasks defined in the game.. 9) You have to develop the game in Unity 3d as it is compatible in many game platforms specially Android and Apple ios. The developed game must not be in conflict in any way with the agreement or policy of the game platform (Android or ios) where it is to be uploaded. Finally after submitting th...

    $781 (Avg Bid)
    $781 Avg Bid
    13 bids

    Development and eventually delivery of a control PCB Specification adjustable speed of 1-4 12Vdc fan 1.) Input voltage: 12Vdc (9 ~ 15Vdc). 2.) Output voltage: 3x 12Vdc/1~10W each output (adjustable PWM) / no-load. 3.) Number of outputs: 1 ~ 4 fans 4.) Stages push button: 4 functions (1-2-3-OFF) and each stage can be adjusted by the potentiometer. a. Visual indication: 3 LED's are placed on the board. Also a connector which can connect external LED's. 5.) Adjustability: 10 ~ 100% speed. i. How: 3 pieces 10-turn mini potentiometer. ii. All: All connected fans are adjusted at the same time 6.) Special feature: each output gets a support electrolytic capacitor, so that the Vout is smoothed and the fan rotates optimally. 7.) Connector Vin: Molex pin 2-pin 4mm and ...

    $570 (Avg Bid)
    $570 Avg Bid
    40 bids

    You will be adding technical details to the existing examples to look it professional. Your experience should include extensive knowledge and experience on multilayer PCB design.

    $296 (Avg Bid)
    $296 Avg Bid
    34 bids
    Mini Sumo Robot PCB Design 1 day left
    VERIFIED

    I am opening a call for mini sumo robot pcb design and usage software project with 2 motors and 3 sensors. I give a single price, I will pay a fee of 150 dollars. I wish the project to be completed quickly and with high quality.

    $134 (Avg Bid)
    $134 Avg Bid
    25 bids

    I have a power amplifier CInepro 2k6 v3 it has a blown power PSU, I have sourced another working amp, The cinepro 3k6v3, luckily enough it has the exact same PSU board within. As you can see from the attached pictures the original from 1st amp is blown to bits, would it be possible to reverse engineer between the 2?

    $171 (Avg Bid)
    $171 Avg Bid
    15 bids

    We currently designed a fully functional EV charger in which now we have to implement OCPP 1.6j library. The PCB have an ESP32. We are currently developing a mobile APP to control the charger via OCPP. Bluetooth and WiFi for handshake. We will test OCPP compliance with Open Charge Alliance tool, infrastructure for wifi and bluetooth is re

    $2067 (Avg Bid)
    NDA
    $2067 Avg Bid
    17 bids

    I want to design a pcb to make a custom power bank, message me for further discussion

    $56 (Avg Bid)
    $56 Avg Bid
    19 bids

    home tutorial service around bole, summit, Hayat, gerji.

    $15 - $25 / hr
    $15 - $25 / hr
    0 bids
    Small redo from tutorial example 19 hours left
    VERIFIED

    Hi, I need to recreate same project as it is in tutorial from youtube. I can give youtube link how it is done in tutorial. I need someone to recreate it from this tutorial because I am not able to figure out some steps in tutorial. Project is in Unreal engine 5.

    $25 (Avg Bid)
    $25 Avg Bid
    13 bids