Pcb soldering jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    11,997 pcb soldering jobs found, pricing in USD
    Design a CANBUS to USB PCB 6 days left
    VERIFIED

    I have a current design for a CANBUS to USB board that was designed badly and either needs updating or start from scratch. It needs to work with our custom designed Windows 10 GUI and interface with our proprietry control system that is CAN based.

    $2375 (Avg Bid)
    $2375 Avg Bid
    4 bids

    We are looking for PCB and Schematic Diagram Designers adept at using Altium Designer. State in your proposal the complexity of the PCB designs that you have worked on, the applications that you have designed schematics for, as well as your hands-on experience in practising DFM / DFA. Begin your proposal with the words "PCB layout". You will be expected

    $11 / hr (Avg Bid)
    $11 / hr Avg Bid
    8 bids

    Hello, I created a schem...aquarium. Due to the fact, that I dont have that much experience in creating circuits/schematics I need someone to verify that the created schematic is ok. As well I need a pcb layout on basis of the circuit. Some components are: ESP32-WROOM, Power Suppy with linear voltage regulators, transistors, RTC schematic with DS3231

    $206 (Avg Bid)
    $206 Avg Bid
    27 bids

    I need a mechanical model for a humanoid robot with pcb layout and other designing work. Its urgent.

    $33995 (Avg Bid)
    $33995 Avg Bid
    12 bids

    I need MDB (coin and bill acceptor) PCB board schematic and arduino code. It must be compatible with arduino nano.

    $180 (Avg Bid)
    $180 Avg Bid
    9 bids

    Hi, I am looking for someone to design and make a PCB layout for my medical device. Please chat for more details.

    $23 (Avg Bid)
    $23 Avg Bid
    6 bids

    Project is a medical device with blue tooth connectivity. Make an Altium (ver 18 or 19) PCB library of symbols of 20 SMT parts. Prjoect needs to be completed in 5 days.

    $23 / hr (Avg Bid)
    $23 / hr Avg Bid
    28 bids

    I need you to design hardware a mobile router which has four Mobile gprs sim7600c-h, gps, 8 canbus connection. Two micro sd card, Power supply 8v to 60v at least. Running on pic32 processor. Any futher questions don't hesitate to contact me. Read Less Read Less

    $751 (Avg Bid)
    $751 Avg Bid
    10 bids

    Debugging blown Arduino boards. We keep blowing up Teensy 3.2 boards and we don't understand why. In addition we could use some PCB design work.

    $55 / hr (Avg Bid)
    Local
    $55 / hr Avg Bid
    1 bids

    Hi I'm looking a pcb designer that has experience in designing pcbs for Dimmers, GFCI and AFCI. Do you have experience with GFCI/AFCI switch designs? If yes, then check my attachments. I need a PCB design similar to this? What information would you need in order to generate this design? I would need the PCB design with a Gerber file and a BOM. Altium

    $161 (Avg Bid)
    $161 Avg Bid
    9 bids

    Trying to solve for a pcb design related electronic formula/equation and need help solving the question. I do not need any design help. Simply help with solving the question.

    $15 (Avg Bid)
    $15 Avg Bid
    3 bids

    PCB design for Arduino Mega Pro in full size, with som minor changes on the connections.

    $166 (Avg Bid)
    $166 Avg Bid
    37 bids

    Already have the prototype design with several board, need to improve the circuit to be in a single board and industrial standard with high reliability.

    $227 (Avg Bid)
    $227 Avg Bid
    31 bids
    need kicad design Expert. 5 days left
    VERIFIED

    I need kicad design expert for long time project. need good communication and quality for schematic and pcb, gerber, BOm I will share project via interview.

    $28 (Avg Bid)
    $28 Avg Bid
    11 bids

    ...forward to design an Electrical socket shell / enclosure (sample attached) but in Type D. The design is limited to outer shell design only and does not include the technology or PCB design. The socket shell design should have :- 1. Provision for RGB lighting 2. Provision for speaker grills (Similar to Alexa dot + Google home mini) 3. Easy for mold fabrication

    $381 (Avg Bid)
    NDA
    $381 Avg Bid
    22 bids

    Freelancer can design and provide basic training of measuring and verification of PCB and schematic. Cadence Allegro preferable.

    $4 / hr (Avg Bid)
    $4 / hr Avg Bid
    21 bids
    PCB DESIGN 5 days left

    WANT THIS TO BE DESIGN WITHIN 24 HOUR

    $22 (Avg Bid)
    $22 Avg Bid
    2 bids

    Hi Victor you had started a LLC power supply for me and we did not get to finish this. So I would like to see on a fixed price...LLC power supply for me and we did not get to finish this. So I would like to see on a fixed price basis for you to finish this. Also I would like a fixed price basis to do a PCB. I have the schematic. Please advise. Thanks.

    $250 (Avg Bid)
    $250 Avg Bid
    1 bids

    We need a PCB design with 3 main componenets: - WIFI module/controller (ESP8266 or any recommendation): this will control whole system and send requests if wifi is available. It will also control power usage to improve battery life. - SIM7000A: will be sending post requests every 15 minutes about sensor details. - Must have 3 input pins (analogue

    $66 (Avg Bid)
    $66 Avg Bid
    4 bids
    RF antenna PCB manufacture 4 days left
    VERIFIED

    Looking for RF antenna PCB manufacture in India. 50 ohms impedance with credit card size PCB

    $216 (Avg Bid)
    $216 Avg Bid
    8 bids
    PCB design 4 days left

    We need to redesign the PCB for power supply of our product. It is built up of 4 separate circuits, two power circuits (300W each) +2 low power circuits. All AC input voltages come from the transformer side. The power circuits outputs should be placed so to reduce the length of the wirings to the respective circuits, and should include the capacitors

    $250 (Avg Bid)
    $250 Avg Bid
    32 bids

    Electrical Engineer to provide full electrical engineering and circuitry solution, Printed Circuit Board Assembly (PCBA) design through the fully compliant and working prototypes with all related components to validate compliance to product modality requirements. Project components in the electrical circuit include and not limited to RGBW LED light bulbs, Lithium Ion/Polymer or Iron-Phosphate rec...

    $4576 (Avg Bid)
    $4576 Avg Bid
    33 bids

    I'm looking for an Eagle Cad designer to transfer provided schematcis into PCB Layout following the dimensions and placement of key components on the BRD Files. Design rules: -Just 2 side PCB with Through Hole components. -All the resistors, capacitors and diodes should be facing in the same direction (check the attached image for reference. -The

    $51 (Avg Bid)
    $51 Avg Bid
    20 bids

    I need a PCB board reviewed and corrections made if needed. I also need a BOM updated and verified with IC footprints. A fast turn around is expected. Good communication skills required. I have the schematic available. PCB file is in Altium and will be made available at award.

    $170 (Avg Bid)
    $170 Avg Bid
    6 bids

    ...device (PoC) that works on the breadboard using ESP32 and SIM808. We are now searching an embedded systems engineer to create a prototype appliance, power suply, schemas, PCB and help us designing a project to manufacture a prototype system. This prototype will be used in a pilot project with 30 users. If the pilot project will approved to "Go"

    $20 / hr (Avg Bid)
    $20 / hr Avg Bid
    32 bids

    Looking for an electrical engineer who is good at the following: matlab pcb design using Altium and eagle electronics project design overall programming power systems studies (ETAP if available) AutoCAD

    $202 (Avg Bid)
    $202 Avg Bid
    18 bids

    ...working on an FPGA based doppler flowmeter with a custom PCB. At the moment, we are in the process of modeling algorithms using raw data recording in Matlab. This freelancer will be tasked with coordinating with the DSP engineer to design and implement changes from the Matlab models into our custom PCB, which Cyclone IV based. There is an existing version

    $174 (Avg Bid)
    $174 Avg Bid
    9 bids

    Hi there, I have a project coming up that is going to require someone in the field of electrical engineering and PCB layout. Basically, I am trying to program a small piece of hardware. Will chat with more details - sorry for the lack of clarity.

    $3863 (Avg Bid)
    $3863 Avg Bid
    29 bids
    web-app ruby on rails 4 days left
    VERIFIED

    ...a user that is offering a resource in exchange of payment and a user that is demanding a resource to be available at the last moment. An example could be a machine shop of PCB working at not completely full capacity and a user that can send his schematic and order a small amount of prototype at the last moment. I need a template in Ruby on Rails where

    $167 (Avg Bid)
    $167 Avg Bid
    10 bids

    I need to have a PCB designed for manufacturing in low scale (prototype). Here below are the specifications it needs to have: must operate from 90-240volts Based on the ESP8266 or ESP8265 chip Wifi antenna part of the PCB Need two designs: 1 and 2 relay Relays (max 10A each), NO/NC posts Inputs (button/switch): 1 per relay through screw post Form factor:

    $55 (Avg Bid)
    $55 Avg Bid
    16 bids

    We want someone to design a circuit for earthquake and fire detection alarm that with the following the hardware. For Microcontroller you may use arduino mini , stm32 or any other The system will have gprs and will every hour connect to server to send temp and humidity info and also check with the server to retrieve new settings . The gsm alert number and alarm threshold values will be read from...

    $191 (Avg Bid)
    $191 Avg Bid
    28 bids
    PCB Design 3 days left

    Hello, We are in the prototyping phase of a new product and we require the design and manufacture of a specific controller that meets the following conditions:  - Feed a piezoelectric mist generator (humidifier)  - Is powered with a 5V power supply by Micro USB  - Have a battery.  - Have a tactile ON / OFF button  - Have a regulator with 4 modes:    * Mode...

    $220 (Avg Bid)
    $220 Avg Bid
    28 bids

    Hi Ben, nice to meet you. I'm looking for someone who can help me with a simple PCB layout of a circular PCB with holes and two copper planes, there are only 3 pads and 3 tracks on the PCB. Let me know if you're interested. Kind Regards, Dennis

    $50 (Avg Bid)
    $50 Avg Bid
    1 bids
    PCB desgin and Prototype 3 days left
    VERIFIED

    We are creating an interactive toy...has an electronic board inside with WIFI chip which can send data to Smartphone application. we are hiring a freelancer who can do the following 1- Design the schematic, PCB layout, manufacturing prototypes, and testing. 2- Submit all designs files, BOMs and firmware. for further information, please contact me.

    $1139 (Avg Bid)
    $1139 Avg Bid
    56 bids

    ...several product ideas that I have documented over the last few years. Skilled professionals with verifiable experience in mobile application development, hardware products, PCB design, and general product design are invited to submit resume for projects in the area of improving sports performance using software-harware products. Alternatively, you may

    $10 / hr (Avg Bid)
    $10 / hr Avg Bid
    3 bids

    I need someone to create a dwg (to scale) of my basic circuit. Just a few components. 6 LED, 6 Resistors. 1 x 30 pin header. LEDs are 5mm No PM please.

    $60 (Avg Bid)
    $60 Avg Bid
    24 bids

    Looking for people expert in deep learning,robotics structure,pcb design and other concepts..

    $72289 (Avg Bid)
    $72289 Avg Bid
    10 bids
    PCB Designing 2 days left

    I need to design a multi layer FPGA PCB in altium.

    $174 (Avg Bid)
    $174 Avg Bid
    5 bids

    Hi, I am a 101% noob at pcb design, I really don't understand how I'm supposed to connect stuff together, ect. I am working on a project to build a rocket, that lands itself like the SpaceX Falcon Heavys' sideboosters. For that I would need a pcb board(s) that would know the following things regarding the rocket: 1. Altitude (preferably above ground

    $1660 (Avg Bid)
    $1660 Avg Bid
    5 bids

    Hi, I am a 101% noob at pcb design, I really don't understand how I'm supposed to connect stuff together, ect. I am working on a project to build a rocket, that lands itself like the SpaceX Falcon Heavys' sideboosters. For that I would need a pcb board(s) that would know the following things regarding the rocket: 1. Altitude (preferably above ground

    $320 (Avg Bid)
    $320 Avg Bid
    7 bids

    Looking for someone who have awesime knowledge of pcb-design and circuits and is good in Arduino. I need artificial inteligence expert who have good knowledge of deep learning,machine learning and face recognization.

    $62143 (Avg Bid)
    $62143 Avg Bid
    6 bids

    Looking for someone who have awesime knowledge of pcb-design and circuits and is good in Arduino. I need artificial inteligence expert who have good knowledge of deep learning,machine learning and face recognization.

    $61050 (Avg Bid)
    $61050 Avg Bid
    3 bids

    Need a power distribution unit(preferably a pcb design) Requirements: Input: 230V AC Output: 5 - 24v DC 5 - 12v DC 4 - 5v Dc

    $29 (Avg Bid)
    $29 Avg Bid
    5 bids

    Hi, I am looking for expert who can suggest me chemicals for treatment of wastewater in India, the chemicals should be low cost and easily available in market. P...wastewater in India, the chemicals should be low cost and easily available in market. Please find attached the water analysis report . Output water parameters should be as per PCB norms.

    $68 (Avg Bid)
    $68 Avg Bid
    6 bids

    First iteration prototypes of a multi-channel Audio mixer with Bluetooth needs redesign/ improvements for production. Schematics in Orcad and PCB layout in “boardmaker” (DOS). You would be required to redo circuit redesign and relayout. Reduce 3 boards to 2 , improve performance, reduce cost, and include production requirements for volume manufacture

    $3000 (Avg Bid)
    $3000 Avg Bid
    21 bids

    i have a circuit diagram designed by me. i want some experience person to make a schematic in proteus or some other software and also design a pcb layout so that i can order for pcb from [login to view URL]

    $17 (Avg Bid)
    $17 Avg Bid
    27 bids

    We are looking for an electronic expert able to retrieve the Bill of Material, Gerber files and Electrical diagram from simple 1 layer PCBs for a total of 3 s...diagram from simple 1 layer PCBs for a total of 3 small boards of a microphone circuit. audio engineers are welcome, but also anybody able to master electronic circuits and PCB manufacturing.

    $201 (Avg Bid)
    $201 Avg Bid
    35 bids

    i have circuit diagram. i want you to make a schematic in proteus or any other software and after that make a pcb layout so that i can order pcb online

    $8 (Avg Bid)
    $8 Avg Bid
    1 bids
    Fix a circuit 22 hours left

    I need a circuitin Eagle to be fix as follow: 1. TF1=> Flyback Pulse Transformer needs to be replaced. Part in the circuit doe not exist. 2. Ro...as follow: 1. TF1=> Flyback Pulse Transformer needs to be replaced. Part in the circuit doe not exist. 2. Rotary switch must be a component wit a real part number. 3. Create PCB needs to be created with BOM.

    $101 (Avg Bid)
    $101 Avg Bid
    8 bids