Pic based inverter jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    3,304 pic based inverter jobs found, pricing in USD

    Pic micro controller to measure 3 phase voltage and current measurement & control the relays based on current readings

    $15 / hr (Avg Bid)
    $15 / hr Avg Bid
    7 bids

    I'll provide you with a pic and high quality audio I need to create a music video, you'll have to do a waveform sync with beat (or moves nicely with the song ) in the background of the pic , or any lighting effect in the background, show me what you can do to look epic I'll upload the audio when we agree

    $162 (Avg Bid)
    $162 Avg Bid
    7 bids

    I am looking for someone to design a control panel on Eplan complete with parts list for the control of two 1.1kW motors via a 120V inverter drive. I will provide a list of recommended parts and a sequence of operation. The system will have feedback from an pressure transducer with analogue output to a Red Lion controller. Control will be via relay

    $228 (Avg Bid)
    $228 Avg Bid
    21 bids

    Make sure you read it from top to bottom... "Urgently" need a "graphic designer." Price is fixed. You must be expert and creative. You need to prepare at least 20 posts per month for hotels/resorts/historical places. I am telling you again that my prices are fixed. If you have a team, you are most welcomed. Make sure you do it with creativity. If you do it great, you will get ...

    $58 (Avg Bid)
    $58 Avg Bid
    25 bids

    Hi, I would like to get a simulation for a resonant inverter in multisim which gives an output of pure sinusoidal wave with a frequency of 200khz.

    $28 (Avg Bid)
    $28 Avg Bid
    4 bids

    ...user select 10 solar modules and then they can choose out 3 or 4 inverter types or brands. the inverter has to cover the amount of modules. user goes true some steps. fisrt step they choose roof type. second step they choose the amount of solar modules. third step they choose the inverter wich is filtered by voltage and max Wp fourth step amount of solar

    $600 (Avg Bid)
    $600 Avg Bid
    28 bids
    $51919 Avg Bid
    11 bids

    Looking for electric circuits and inverter design engineer for our startup company

    $1772 (Avg Bid)
    $1772 Avg Bid
    12 bids

    solar electric project 91 - Silfab 370 solar modules, Solar Edge 3 phase 208v/120v inverter. Need electrical diagram

    $472 (Avg Bid)
    $472 Avg Bid
    26 bids

    I have firmware in C for a MikroElectronika "PIC Clicker" development board using a PIC18F47J53. It includes MikroE's USB library for CDC (USB RS232 emulation). Works fine on Windows, but on a Mac (e.g. OS-X 10.9.5) it registers a /dev/[login to view URL] port but doesn't communicate (hangs on host write to board). On Linux, it creates a /dev/ttyACMXX port

    $1507 (Avg Bid)
    $1507 Avg Bid
    10 bids

    change app pic from yellow cab of lake norman to yellow cab nc !

    $12 (Avg Bid)
    $12 Avg Bid
    5 bids

    220 pulsar pic editing. It looks beautiful. Its colour must be change. And nature colour also changed.

    $274 (Avg Bid)
    $274 Avg Bid
    29 bids

    Smooth out feet and legs. even out toes

    $18 (Avg Bid)
    $18 Avg Bid
    14 bids

    Photoshop of a picture. Cut the image from one pic and add it in another one.

    $19 (Avg Bid)
    $19 Avg Bid
    45 bids

    ONE WAY MESSENGER FOR MOBILE PHONES. The application consist of sending real time messages and pictures from desktop to subscribers mobile phones (Android & IOS). The messages sent are for different categories and the subscribers have to choose which categories they want to subscribe so they will receive only the messages related to those categories. Subscribers are required to register to get...

    $562 (Avg Bid)
    $562 Avg Bid
    9 bids

    I m Doss , i would like display video on two module p5 using pic for exemple 18f6722 ,

    $10 - $30
    $10 - $30
    0 bids

    Hello. ImI using PIC 18F25K22 and XC8 compiler. I need to measure the power factor of our circuit. To measure the power factor first, i need to measure the time between two different signals on two different pins. Please help me to do this

    $235 (Avg Bid)
    $235 Avg Bid
    15 bids

    Hello. ImI using PIC 18F25K22 and XC8 compiler. I need to measure the power factor of our circuit. To measure the power factor first, i need to measure the time between two different signals on two different pins. Please help me to do this

    $292 (Avg Bid)
    $292 Avg Bid
    14 bids

    We curate art online for men and women who are in prison ([login to view URL]). We get checks that go to a mailing agent and that agent scans to email...so we never have a physical copy of our checks. We use the ingo app to cash our checks but it prompts the camera app on our device to take a picture of a check that we have in hand. That won't work. What we need (I think) is a camera app...

    $494 (Avg Bid)
    $494 Avg Bid
    23 bids

    I'm looking for a single line drawing for A CHP project 6 kw Project The energy source is Natural Gas and the inverter spec sheet is attached below. Reach out to me if you've any questions

    $75 (Avg Bid)
    $75 Avg Bid
    4 bids

    Need someone who have worked on pic12f675

    $29 (Avg Bid)
    $29 Avg Bid
    5 bids

    I have a picture of my product. I don't like the name of the manufacturer of the case on it. So I need that just blended out using the colour around it. I also need some writing (around 17 letters) placed on the side of the box

    $45 (Avg Bid)
    $45 Avg Bid
    24 bids

    I need some graphic [login to view URL] avatar

    $24 (Avg Bid)
    $24 Avg Bid
    21 bids

    i have this website with regular menu i need to make it like the menu in this website: http://talents123.ca. on hover the icon moves, dropdown same color as the icon ... want it multicolor. same as the menu in the link above. only serious and know php and css....

    $22 (Avg Bid)
    $22 Avg Bid
    18 bids

    The proposed design is to use the Picaxe 08M2. The chip is to operate two timer functions. 1. Using a keyswitch input it generates a pulse output depending which way the key switch is turned (when turned on it outputs a high signal for 2.5sec, when turned off it outputs a high signal for 6sec). 2. When an input goes high, it resets a 24hr timer. If the input doesn't go high before the 24hr...

    $5 / hr (Avg Bid)
    $5 / hr Avg Bid
    4 bids

    need to create a prototype from autoinverter and then change this into multiple stl files. Have the autodrawing.

    $62 (Avg Bid)
    $62 Avg Bid
    36 bids

    I have a code which is using PIC controller and I want to taje the design to Open CPU using SIMCOM or Qualcom module which support Open CPU modem. I am looking for someone who has done similar work before and can undertake the same. The project is for a GPS tracker. We can undertake one project and if its succesful undertake the second one after

    $384 (Avg Bid)
    $384 Avg Bid
    4 bids

    I have a product which was using PIC24 controller and now I have designed a hardware for STM controller with almost similar interfaces. I want someone to port the code for STM controller and check the working on new hardware design The code is written in C and developer who has done says it can ported easily Need to have STM development kit so you can simply attach the same with old hardware an...

    $221 (Avg Bid)
    $221 Avg Bid
    10 bids

    I am looking for a profile pic and banner for my youtube channel "Birdie Boys". We are a disc golf channel so we absolutely need disc golf incorporated into the logo. In disc golf a birdie is a really good shot. So representing a "birdie", if we can incorporate a bird possibly. I am ready to see what you come up with

    $10 (Avg Bid)
    Guaranteed
    $10
    30 entries

    photoshop on pictures for lighting

    $16 (Avg Bid)
    $16 Avg Bid
    24 bids

    Design a 4-bit ripple carry adder and create a layout manually using Microwind. Perform simulations to verify the co...manually using Microwind. Perform simulations to verify the correctness of your layout. Project details are in: [login to view URL] A tutorial in using Microwind is in: Microwind Inverter Design [login to view URL] Use IEEE format for report.

    $45 (Avg Bid)
    $45 Avg Bid
    2 bids

    *** NEED THIS DONE WITHIN 3 HOURS *** Hello please design 3 properly dimensioned facebook pieces. Very simple Follow word doc instructions and check out the website listed there.

    $40 (Avg Bid)
    $40
    26 entries

    Hi.. I need to design a 9vdc to 110vac inverter .. using simple circuits .. I don't want to use 555 timer .. I have 3.3v pwm output signal from Esp8266 module ..using that signal I want to design the inverter

    $11 (Avg Bid)
    $11 Avg Bid
    1 bids

    ...and the deadline is on friday so i needed in the nearset day pleas Here is the questions: i) Implement a 4-bit full adder. ​​​​​​​​5% ii) Implement a 4-bit controlled inverter. ​​​​​​​5% iii) Implement a 4-bit full addition / subtraction unit.​​​​​​5% iiii) Implement a 4-bit logical unit with multiplexor (AND, OR, XOR, !A)​​​​5% v) Use a single

    $65 (Avg Bid)
    $65 Avg Bid
    1 bids

    I need a logo designed for Instagram. I already have one I’d like copied but changed please. Thank you

    $25 (Avg Bid)
    $25 Avg Bid
    53 bids

    Hi, We looking for a freelance who can program PIC controller to interface with android app. Develop Android app. PIC controller to logic solver for digital inputs and output relays. Analogue inputs.

    $2677 (Avg Bid)
    $2677 Avg Bid
    27 bids

    I'm creating a youtube channel devoted to beer enthusiasm and gaming. We can discuss designs once I've seen some of your work. The last time I posted this project I received too many bids far too fast which led me to believe that this may not be getting read. Add your favorite beer at the bottom of your bid. Thanks,

    $24 (Avg Bid)
    $24 Avg Bid
    33 bids

    A freelancer has to build a program based on PIC, that automatically manages the data flow direction of the RS-485 serial port from RS-232, taking into account the baud rate and the number of bits, without any special configuration or software command, i.e, totally transparent to the MCU. It must be 100% compatible with Modbus! Freelancer has to deliver:

    $26 (Avg Bid)
    $26 Avg Bid
    3 bids

    I am starting a new company to assemble 18650 Battery into wall mounted packs for backup power using a inverter to replace Lead batteries used today. Need someone who can design the internals of the box.

    $442 (Avg Bid)
    $442 Avg Bid
    10 bids

    I need a variable frequency designer for 3-phase to implement different techniques. please only contact if you have experience in this field. and I would like to read your proposal if you mention your previous work. No hurry,Fixed Price.

    $621 (Avg Bid)
    $621 Avg Bid
    20 bids

    Design an energy-efficient nanogrid using PSCAD simulation software. The nanogrid must be a cascaded design which consists of 5 Wind Source components (with varying wind speeds of 6 - 8 m/s), 5 Quasi-Impedance-Source Inverters (Q-ZSIs), and 5 PI Controllers to provide boost regulation at the nanogrid's output. A step-up transformer may be added to achieve the desired voltage level for the bat...

    $277 (Avg Bid)
    $277 Avg Bid
    7 bids

    Hi guys!!! I am chasing a good sketchup artist to help us out with a project that we have a very pressing timeline on. We want to show our client what their inverter station would look like when complete. This project is due tomorrow afternoon at 4:00pm, so we have less than 24 hours to get this done. Its very simple, assuming you can

    $70 (Avg Bid)
    $70 Avg Bid
    10 bids

    ...systems & calculations, etc. as per agreed Commitment/contract. Electrical Components selection and Based on technical as well as commercial benefits based vendor assessment process for major components like PV module, String Monitoring Box, Batteries, Inverter, cables, etc. Design & Detailing of System DC Single line diagram making & BOS making as per system

    $103 (Avg Bid)
    $103 Avg Bid
    18 bids

    Basically i want a 24 volt inverter and 500watt with less dimension of transformer.

    $334 (Avg Bid)
    $334 Avg Bid
    8 bids

    Need a pic designed up using the attached pic as the feature with the two cricket club logos also featuring evenly in some way. Colour scheme should be taken from the green & gold in Dromana CC logo. I’ll be awarding a winner today - so let’s see what you can do creatively ... but quickly! Text for pic: CONGRATS JACKY-BOY We’d like to congratulate

    $28 (Avg Bid)
    $28
    4 entries

    feedback control system design in matlab for boost converter and inverter in matlab with full explation

    $148 (Avg Bid)
    $148 Avg Bid
    17 bids

    I need someone to alter some images.

    $5 / hr (Avg Bid)
    $5 / hr Avg Bid
    2 bids

    There is a PIC 16F1936 (28 pin SSOP) currently working on a PCB. We want to keep the PCB design (RC6 and RC7 excepted, as seen later) to a PIC with more pins: PIC 16F1939. Furthermore, we want to use three more pins for AD conversion as the current one. The aim is doing the following implementations in MPLab: Migrate from the PIC 16F1936 (28 pin SSOP)

    $221 (Avg Bid)
    $221 Avg Bid
    27 bids

    I need a logo for my gaming channel along with a matching banner and panels. The logo would be a cartoon design/character design based on the pic attached. I only need the HEAD for this. The panel designs would need to have the words mentioned in file - panel names The banner size would need to be 1920 x 480 The panel designs would need to be 320

    $28 (Avg Bid)
    Guaranteed
    $28
    42 entries