Filter

My recent searches
Filter by:
Budget
to
to
to
Skills
Languages
    Job State
    129 pic18 jobs found, pricing in USD

    The project about switching on the block of street light ahead of it and simultaneously switching off the trailing lights when motion is [login to view URL] are re...theres no motion detected and when motion is detected the lights ahead of it are switched on with 100% intensity and the trailing lights revert back to 10% intensity. Using PIC18 or PIC16.

    $116 (Avg Bid)
    $116 Avg Bid
    9 bids

    I need a circuit using PIC18 hi temp chip, it needs to has 2 PWM and rs285 communication, the PWM must make a sine wave and the frequecy to be changed over RS485 Modbus

    $113 (Avg Bid)
    $113 Avg Bid
    20 bids

    Looking for simple PIC programming project

    $26 (Avg Bid)
    $26 Avg Bid
    7 bids

    ...decumintation, and visualize any engineering project after making a 3D model of it 2- programming the Following types of micro controller: A- Arduino UNO B- raspbrey pi C-PIC18 Micro controller 2-making a prototype for engineering projects Im looking for a position in your groop if you are intrested you can contact me by the Folowing : Email: mohammadjmag@gmail

    $10 / hr (Avg Bid)
    $10 / hr Avg Bid
    1 bids

    Hi Muhammad T., I noticed your profile and would like to offer you my project. We can discuss any details over chat.

    $25 (Avg Bid)
    $25 Avg Bid
    1 bids

    I need you to develop some software for me. I would like this software to be developed for Windows using C or C++. SD card interfacing with PIC18 microcontroller.

    $136 (Avg Bid)
    $136 Avg Bid
    9 bids

    1. Enable I2C communication within two different PIC18 & PIC32. 2. Buttons and LEDs Trigger 3. Must develop with MPLABX 4. Message us for projects schematics

    $32 (Avg Bid)
    $32 Avg Bid
    11 bids

    Software ( in C based CCS or Microchip MPLABX) for a 50 x 16 OLED graphics display. (type: Midas MCOB050016AV-WP which includes a MC0010 driver), from a PIC16 or PIC18 series Microchip microcontroller. Preferred PIC16F886. Display to be full height - 16 pixel - character font ( 1 row) switchable to 8 pixel 2 row. Display Alpahnumeric's and symbols

    $661 (Avg Bid)
    $661 Avg Bid
    16 bids

    ...to make simple and fast , please who paid in this project should read before he paid , i simply want to record voice from one adc in pic18 , to sd card using wav header or au header .. i already connect sd card to pic18 using fat32 in mikorc , but now i want only to get data and send it sd card .. the speak should be 16khz or 8khz using full 10 bit

    $122 (Avg Bid)
    $122 Avg Bid
    7 bids

    I'm looking for the developer for 2-3 month to write the code for several PIC18 100pin controllers which communicate with computer, control various sensors, etc... UART, I2C, SPI.. please apply with your portfolio. the candidate should know PIC18 controllers and MPLAb X very well and have microchip debugger.

    $11 / hr (Avg Bid)
    NDA
    $11 / hr Avg Bid
    24 bids

    ...sensors and they send values of the sensors via beacon bluetooth communication. We are planning to use ARM(ST32F0.. or STM32L0.. ) or Microchip controllers (PIC12, PIC16 or PIC18) for master bluetooth system. All beacon modules are going to send datas for every 1 second. So, we will take 3 different datas for 1 second. Also we should choose a bluetooth

    $764 (Avg Bid)
    $764 Avg Bid
    23 bids

    Hi. I need help programming a pic18f so that it can read CAN messages (extended) from a CAN-bus and send them out on USART. I also want it to be able to take messages from USART and send them on the can bus. The project only includes programming the pic18f, nothing else. The Microcontroller used is a PIC18F66K80. It has a built in CAN-controller and an USART. I would prefer if you used XC8 othe...

    $378 (Avg Bid)
    $378 Avg Bid
    9 bids

    I am building a small sensor node and a Wifi receiver base module. The sensor node has 2 temperature sensors (DS18B20 1 wire) and a water leakage detector (ON / OFF pin). Both circuits use a PIC18F27K40. The temperature data is sent wirelessly from the sensor node to the base module. We use a Wireless Transmitter module RFM95W 868 MHz (using SPI communication). The base module will send the dat...

    $549 (Avg Bid)
    $549 Avg Bid
    30 bids

    Description : "I am looking for high skilled engineer with PIC18 MCU and MPLAB X

    $262 (Avg Bid)
    $262 Avg Bid
    4 bids

    The project is interfacing usb keyboard to a pic microcontroller with 2*16 lcd...is interfacing usb keyboard to a pic microcontroller with 2*16 lcd. The code should be written in C on MplabX. the code should be done using the host library of microchip. pic18 micro family should be used. the requirement is the .x folder project and a proteus schematic.

    $165 (Avg Bid)
    $165 Avg Bid
    4 bids

    The project is interfacing usb keyboard to a pic microcontroller with 2*16 lcd...is interfacing usb keyboard to a pic microcontroller with 2*16 lcd. The code should be written in C on MplabX. the code should be done using the host library of microchip. pic18 micro family should be used. the requirement is the .x folder project and a proteus schematic.

    $77 (Avg Bid)
    $77 Avg Bid
    6 bids

    I need to clean up the code on this development kit: [login to view URL] This kit has many features I don't need I only need the Ethernet to UART part , I don't need the web server part, I will remove the external flash memory on the board, so I need to get this working without the flash memory that's where the web server part is.

    $97 (Avg Bid)
    $97 Avg Bid
    6 bids

    i need some information about PIC microcontroller PIC18, PIC24, PIC32

    $22 (Avg Bid)
    $22 Avg Bid
    20 bids

    I need to send data from PC to PIC wirelessly. The data is price value which gets updated every second/minutes on PC by putting current time into an e...output value has to be transferred to PIC and price value on PIC get updated. Either through MATLAB or anything else via RS232 OR Via RF wireless link which is preferred. PIC18 series will be used.

    $190 (Avg Bid)
    $190 Avg Bid
    27 bids

    we use a pic18 for data acquisition and we need this subproject "data have to be transmitted to a web center via LAN with a specified protocol"

    $644 (Avg Bid)
    $644 Avg Bid
    15 bids
    $221 Avg Bid
    19 bids

    I am building a small sensor node and a Wifi receiver base module. The sensor node has 2 temperature sensors (DS18B20 1 wire) and a water leakage detector (ON / OFF pin). Both circuits use a PIC18F27K40. The temperature data is sent wirelessly from the sensor node to the base module. We use a Wireless Transmitter module RFM95W 868 MHz (using SPI communication). The base module will send the dat...

    $613 (Avg Bid)
    $613 Avg Bid
    35 bids

    i want to control motor with pic18 respective to [login to view URL] temp increases speed of motor gardually increase and display on lcd can someone provide me mplab c code and proteus schematic?

    $37 (Avg Bid)
    $37 Avg Bid
    14 bids

    I'd like to get a MikroC Pro TCP/IP Stack Implementation for the PIC18 series, very similar to the library provided by Microchip. The library must support the same protocols (TCP,UDP,ARP, IP, ICMP, UDP, TCP, DHCP, SNMP, HTTP, FTP, TFTP,SSL)as the Microchip library and work with MikroC v3.80 and up. I need full source code and API documentation.

    $188 (Avg Bid)
    $188 Avg Bid
    7 bids

    programming of a given hardware, Pic18

    $28 (Avg Bid)
    $28 Avg Bid
    2 bids

    Basicly the project is using the current sensor to detect load current send to the energy IC ADE7753 . I prepare to use PIC18 microcontroller to drive the IC and do the calculation and calibration.

    $66 (Avg Bid)
    $66 Avg Bid
    5 bids

    Basicly the project is using the rogowski coil as the current sensor to detect load current send to the energy IC ADE7753 . I prepare to use PIC18 microcontroller to drive the IC and do the calculation and calibration. The real power comsuption will be shown on LCD . What I need is the C programming to drive the ADE7753 as well as the [login to view URL] I

    $101 (Avg Bid)
    Urgent
    $101 Avg Bid
    3 bids

    Using two PIC18F4550 as I2C Master-Slave this work should be done using : 1 C language 2 Mplab X IDE 3 C8 compiler 4 PIC18F4550 5 Breadboard 6 Pickit3

    $117 (Avg Bid)
    $117 Avg Bid
    19 bids

    MikroC code for interfacing AD7714 24 bit ADC with PIC16f877A in SPI mode

    $40 (Avg Bid)
    $40 Avg Bid
    3 bids

    Measurement of AC current with a resolution of 100micro ampere (least count) using 20-24 bit adc with PIC16f or PIC18f microcontroller

    $107 (Avg Bid)
    $107 Avg Bid
    11 bids

    Comp...prepare a report detailing your proposed solution for the Assembly Line Controller (ALC). Stage 2 of the project requires to design any additional/alternate hardware for a PIC18 microcontroller for input/output and (b) write a main program and any additional functions or subroutines to operate the fully functional assembly line controller.

    $330 (Avg Bid)
    $330 Avg Bid
    7 bids

    Need someone to develop a simple calculator on proteus using PIC18 microcontroller. I will forward details to all bidders.

    $16 / hr (Avg Bid)
    $16 / hr Avg Bid
    4 bids

    Need someone to develop a simple calculator on proteus using PIC18 microcontroller. I will forward details to all bidders.

    $11 / hr (Avg Bid)
    $11 / hr Avg Bid
    3 bids

    Write simple code for microcontrollers like atmel attiny or microchip pic18.

    $2366 (Avg Bid)
    $2366 Avg Bid
    20 bids

    ...of assembly. Infrared sensor beams are usedto detect the position/presence of the core placed on the conveyor, at the winder and at the test [login to view URL] client has specified a PIC18-based controller is required, as they are familiar with that family of MCUs. The controller is to accept input from a human operator and be able to control the operation of

    $178 (Avg Bid)
    $178 Avg Bid
    5 bids

    ...assembly. Infrared sensor beams are used to detect the position/presence of the core placed on the conveyor, at the winder and at the test point. The client has specified a PIC18-based controller is required, as they are familiar with that family of MCUs. The controller is to accept input from a human operator and be able to control the operation of

    $23 (Avg Bid)
    $23 Avg Bid
    1 bids

    Dear freelancer , what i want that some one will start with me online classes how I can start record via pic18 or pic24 over MIkroc , in wav format and how to manage to get minimum current consumption, what the trick we can use , and how we can change sample rate no need for pcb design , all work will be done over development kit such as easy

    $22 / hr (Avg Bid)
    $22 / hr Avg Bid
    8 bids

    Dear freelancer , what i want that some one will start with me online classes how I can start record via pic18 or pic24 over MIkroc , in wav format and how to manage to get minimum current consumption, what the trick we can use , and how we can change sample rate no need for pcb design , all work will be done over development kit such as easy

    $22 / hr (Avg Bid)
    $22 / hr Avg Bid
    1 bids

    Basicly the project is using the rogowski coil as the current sensor to detect load current send to the energy IC ADE7753 . I prepare to use PIC18 microcontroller to drive the IC and do the calculation and calibration. The real power comsuption will be shown on LCD . What I need is the C programming to drive the ADE7753 as well as the [login to view URL] I used

    $212 (Avg Bid)
    $212 Avg Bid
    18 bids

    Basicly the project is using the rogowski coil as the current sensor to detect load current send to the energy IC ADE7753 . I prepare to use PIC18 microcontroller to drive the IC and do the calculation and calibration. The real power comsuption will be shown on LCD . What I need is the C programming to drive the ADE7753 as well as the [login to view URL] I used

    $200 (Avg Bid)
    $200 Avg Bid
    1 bids

    simply using pic18 or 24 to record wav format on sd card . the system should be with lowest power consumption , I will start with normal line in voice , no need for microphone , only to know the concept , I have full development kit and wait for program . what is requirement form freelancer : - 1- no need to design PCB , development kit in my

    $16 / hr (Avg Bid)
    $16 / hr Avg Bid
    8 bids

    I have a TW8836 video process...to TW8836 (Blue=CIN1, Green=YIN3, Red=VIN0,VGA_HS=EXT_HS, VGA_VS=EXT_VS). LVDS video output from TW8836 to 10.1" TFT screen (1024x600 pixels). I need MPLAB code for the PIC18 to initialize/setup the TW8836 to receive the RGB video input and output the correct LVDS video. Board schematic is available upon request.

    $821 (Avg Bid)
    $821 Avg Bid
    6 bids

    I need a project based on the DM182018 Demo kit by Microchip. I want to adapt the boards to the following: On the PIC18F board: 1 - Read 2 ADC (potentiometers) and transmit it to the PIC32 board; 2 - Read 2 switches and transmit it's state to the PIC32 board; 3 - Read temperature from PIC32 board; 4 - Indicate button state on LED1 and LED 3; 5 - Show ADC (potentiometer) readings, P...

    $138 (Avg Bid)
    $138 Avg Bid
    5 bids

    I'd like to get a MikroC Pro TCP/IP Stack Implementation for the PIC18 series, very similar to the library provided by Microchip. The library must support the same protocols (TCP,UDP,ARP, IP, ICMP, UDP, TCP, DHCP, SNMP, HTTP, FTP, TFTP,SSL)as the Microchip library and work with MikroC v3.80 and up. I need full source code and API documentation.

    $345 (Avg Bid)
    $345 Avg Bid
    8 bids

    Need a programmer familiar with SPI/Canbus to double check programming and write additional code. Must be familiar with with programming PIC18 PIC 33 and PIC 12 microcontrollers and willing to work with hardware engineer to consult in circuit design and can troubleshoot hardware prototypes.

    $2500 (Avg Bid)
    $2500 Avg Bid
    1 bids

    program is to be written in C using...using the MikroC PRO for PIC IDE. You must create a MikroC PRO for PIC project which may include one or more C source files. The testing is to be completed using: the Oshonsoft PIC18 simulator and/or the MikroC PRO for PIC debugger. More information will be share through PM. My budget is 55$ and deadline 2 days

    $5 / hr (Avg Bid)
    $5 / hr Avg Bid
    20 bids

    This project will use PIC18 or greater, you decide. PIC that you choose must have a sample available via microchip.com. The project requirements: - Code that runs servos/stepper motors (you decide) to rotate according to the earths rotation. - Code that runs an LED strip at different levels of brightness (simulate sun). I imagine PWM will need

    $173 (Avg Bid)
    $173 Avg Bid
    29 bids

    ...chip (series 18 is preferred - 8 bit). To utilise microchip MRF24WB0MA preferred (and associated TCP, etc chip stack from Microchip. Hardware could be optional in offer but PIC18 and appropriate hardware is preferred. Utilising Mikroe Pro C is preferred, source code is to be provided as part of project. Lib would require such that information in

    $5785 (Avg Bid)
    $5785 Avg Bid
    5 bids

    ...chip (series 18 is preferred - 8 bit). To utilise microchip MRF24WB0MA preferred (and associated TCP, etc chip stack from Microchip. Hardware could be optional in offer but PIC18 and appropriate hardware is preferred. Utilising Mikroe Pro C is preferred, source code is to be provided as part of project. Lib would require such that information in of

    $3848 / hr (Avg Bid)
    $3848 / hr Avg Bid
    1 bids