Pptp signal jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    21,003 pptp signal jobs found, pricing in USD

    We are a 22 years old electronics company. Looking for electronic engineers for reverse engineering and improvement of existing circuits. Freelancer should have deep knowledge of both analogue and digital electronics components and capability to trace the circuit diagram from existing PCB and then redesign the new PCB with improvements. Experienced elect...digital electronics components and capability to trace the circuit diagram from existing PCB and then redesign the new PCB with improvements. Experienced electronics engineers with design & development background will be preferred. We have continuous work flow for 12 months. Our projects include LED based lighting system for critical application, power supply for LED lighting, various types of signal amplifiers, RF based...

    $79 (Avg Bid)
    $79 Avg Bid
    10 bids

    We are a 22 years old electronics company. Looking for electronic engineers for reverse engineering and improvement of existing circuits. Freelancer should have deep knowledge of both analogue and digital electronics components and capability to trace the circuit diagram from existing PCB and then redesign the new PCB with improvements. Experienced elect...digital electronics components and capability to trace the circuit diagram from existing PCB and then redesign the new PCB with improvements. Experienced electronics engineers with design & development background will be preferred. We have continuous work flow for 12 months. Our projects include LED based lighting system for critical application, power supply for LED lighting, various types of signal amplifiers, RF based...

    $7 - $18
    $7 - $18
    0 bids
    WhatsApp Gateway 5 days left

    The goal of the project is to...regardless of the version number. The gateway must return appropriate call error codes to the SIP backend, such as CALL SUCCESS, BUSY, UNAVAILABLE, etc. To determine the success of the project, we will choose the solution that consistently triggers successful SIP/WhatsApp calls. Step-by-Step Process: Incoming calls will be directed to the WhatsApp gateway. The gateway will then convert the SIP/IAX signal to the WhatsApp protocol. The termination number, taken from the origination header, will be verified by the WhatsApp gateway. If the number is in use by WhatsApp and the recipient is online, the call will be completed on WhatsApp. If the number is not in use by WhatsApp, the gateway will send a 503 error and the call will be redirected to other...

    $664 (Avg Bid)
    $664 Avg Bid
    9 bids

    ...in binance futures signal time : shows when the buy and sell action came count : Shows how many times a signal is received from the same coin symbol : coin name last price : current price percent : % size and impact of incoming purchases and sales 24h change : Represents 24-hour change total : The numerical size of the purchase and sale made expresses how many units are bought and sold. signal : Indicates whether the signal is long or short. long if buy, short if sell example: bitcoin 24 hour volume : $16,420,024,252 We want to see purchases and sales above 0.20% of this volume (buy or sell) Btc 24 hour Volume : 16248198240 = 0,3008595793494797 inbound sales amount is 0.30% of the volume ...

    $682 (Avg Bid)
    $682 Avg Bid
    21 bids

    Matlab coding and simulation of signal processing research paper algorithm for distance estimation through coded frequency hopped signal

    $157 (Avg Bid)
    $157 Avg Bid
    9 bids
    Generate a singed apk 5 days left
    VERIFIED

    I have complete project of Flutter everything is setup like backend, database, admin panel, firebase, one signal but I'm unable to generate signed apk so if you can do it for me please apply for it. I think there is some gradel error.

    $5 / hr (Avg Bid)
    $5 / hr Avg Bid
    26 bids

    I have pt100 temperature sensor signal connected to plc put the signal is not stable as there is many noise come from vfd so I need low pass filter circuit to enter the pt100 signal on it to make filter of any other noise

    $25 (Avg Bid)
    $25 Avg Bid
    22 bids

    Hi, I have the following issue. The attached strategy identifies the High/Low for a specific time period. Once the High is exceeded within the Session Close time, the signal is generated. Now this strategy only takes the current session into consideration. I also want to use the High/Low from yesterdays session. So the coding is to add yesterdays Session High/Low, the signal is only generated when the current and yesterday sessions high is exceeded by factor X. //Time HLRange Define input: Multiplier(1),Ratio(3), StartTime( 900), // Time of start of channel EndTime( 1000), SessionCloseTime (1200), EntrySizes (10000), int NATR(9), // 5-60 STEP 5 double Fract(1.3); // 0.6 - 3.5 STEP 0.1 or 0.15 Vars: PeriodHigh( 0 ), // Updated with peri...

    $30 (Avg Bid)
    $30 Avg Bid
    1 bids

    Hi :) I need help with developing a divergence indicator that excludes "invalid divergence" when plotting. I have developed a divergence indicator but I get to many false signals. What I mean by false divergence signal is explained in this link

    $50 (Avg Bid)
    $50 Avg Bid
    1 bids

    Hi :) I need help with developing a divergence indicator that excludes "invalid divergence" when plotting. I have developed a divergence indicator but I get to many false signals. What I mean by false divergence signal is explained in this link

    $50 (Avg Bid)
    $50 Avg Bid
    1 bids

    Hi :) I need help with developing a divergence indicator that excludes "invalid divergence" when plotting. I have developed a divergence indicator but I get to many false signals. What I mean by false divergence signal is explained in this link

    $50 (Avg Bid)
    $50 Avg Bid
    1 bids

    Hi :) I need help with developing a divergence indicator that excludes "invalid divergence" when plotting. I have developed a divergence indicator but I get to many false signals. What I mean by false divergence signal is explained in this link

    $50 (Avg Bid)
    $50 Avg Bid
    1 bids

    Hi :) I need help with developing a divergence indicator that excludes "invalid divergence" when plotting. I have developed a divergence indicator but I get to many false signals. What I mean by false divergence signal is explained in this link

    $50 (Avg Bid)
    $50 Avg Bid
    1 bids

    Requirements, implement a protocol decoder which can decode an SPI signal. language c or python, any one accept.

    $5 / hr (Avg Bid)
    $5 / hr Avg Bid
    18 bids

    I need a telegram signal sender robot. It should send the all the details of the trades to my custom telegram channel

    $50 (Avg Bid)
    $50 Avg Bid
    8 bids

    We want to use a arduino to control a ebike motor controller. We want to use various signals from sensors such as brake levers,throttle and pedal sensor to output a analog signal in a range of .1 up to 3.3 volts.

    $982 (Avg Bid)
    $982 Avg Bid
    57 bids

    I need a pinescript startegy tester for Double Supertrend Strategy. There will be 2 supertrends with different period and factor. When a signal is generated on both of them at a time then only entry shall happen and when both of them show reversal at a given point o time then only reversal shall happen and oppsite positions shal betaken. Startegy tester should have all the normal parameters like max drawdown and run up etsc. and should work on different time frames.

    $87 (Avg Bid)
    $87 Avg Bid
    5 bids

    To complete this assignment, there are two necessary concepts you must master: managing execution contexts and signal handlers.

    $82 (Avg Bid)
    $82 Avg Bid
    10 bids

    implement a protocol decoder which can decode an SPI signal

    $70 (Avg Bid)
    $70 Avg Bid
    3 bids

    ...a 30second time to Accept their Match. If they don't Accept their match it will disappear and they must press Match Me again. 5. Users can upload pictures but no videos at this point. 6. User can hit the Rolodex/Add all contact buttons on the Event screen, this will add all the members of the event to their Contacts. If they have a free account, it will add 5 members to their Rolodex and then signal them to pay for additional Contacts space. 7. Users that create Events will have their own profile, please another inbox for Event messages. You can see the Event message button on the event homepage. 8. If you press the Clock/timer on someones profile page that will make a drop down request menu appear on their screen. This is a direct match request. Match me is different ...

    $1482 (Avg Bid)
    $1482 Avg Bid
    69 bids

    It is possible to sell forex books, sell any signal, and teach anything in that area, and you won't be able to earn a living with Envis.

    $566 (Avg Bid)
    $566 Avg Bid
    19 bids

    i need someone can remote or give me the solution to fix my problem, using flutter 3.7 before 3.3 version without error, need someone good in flutter and fix this bug E/AndroidRuntime(11674): : Found interface , but class was expected (declaration of 'com.googl...java:288) E/AndroidRuntime(11674): at () E/AndroidRuntime(11674): at (Native Method) E/AndroidRuntime(11674): at $() E/AndroidRuntime(11674): at () I/Process (11674): Sending signal. PID: 11674 SIG: 9 Lost connection to device.

    $37 (Avg Bid)
    $37 Avg Bid
    25 bids

    TEST HYDRAULIC ELECTROVALVES The Particle Web IDE National control devices PCA9685 8-Channel 8W 12V FET Driver Proportional Valve Controller 8-Channel DC Current Monitor with I2C Interface 2-Channel Signal Relay 1A SPDT I2C Mini Module 1 i2C pressure sensor 1 Interface ADC....etc Rasbery i2c communication, Particle Photon,The Particle Web IDE more info :

    $547 (Avg Bid)
    $547 Avg Bid
    18 bids

    Looking to hire a RF Engineer for local consultant work. Could be part-time or side gig, willing to work around your schedule. Looking for experience using lab and field test equipment such as: Oscilloscopes, Network Analyzers, Spectrum Analyzers, and Signal Generators.

    $36 / hr (Avg Bid)
    $36 / hr Avg Bid
    20 bids

    I need help understanding transient behavior of RC / RL / RLC circuits. I also need to understand Impulse Response and Convolution. Lastly I need someone who is an expert in Digital Signal Processing - Sampling, Quantization and Convolution. I need about 20 hours of your time between now and Tuesday Feb 7th.

    $118 (Avg Bid)
    $118 Avg Bid
    43 bids
    Pine Script - Modifications 14 hours left
    VERIFIED

    ...[works on ES symbol and 15 minute timeframe] (currently script waits for the end of the 8:15AM bar before sending a signal). Need the following - adjust trade entry rules to work intrabar: meaning the conditions should submit within the same bar and not only on bar close. so for example if the session bar starts at 8:15AM then signal should be able to come at anytime (e.g. 8:16AM, 8:18AM etc and not only on bar close) - get bar-magnifier working for precise backtesting. (bar magnifier needs exact price for strategy entry in order to work. If we manage to give it the price from above then this will work - make sure alerts are correctly configured to send an email when the entry signal is active. - eliminate any repainting. Reasonable price please. This is only for ...

    $203 (Avg Bid)
    $203 Avg Bid
    13 bids

    Hello, I need help with coding share-buttons to share website link to a few messaging apps/sites listed below: 1 Facebook Messenger 2 Skype 3 Telegram 4 Signal 5 WhatsApp 6 Google Hangouts 7 Snapchat 8 Discord 9 Viber 10 Riot 11 Threema 12 WeChat 13 LINE 14 KaKaoTalk 15 Wire 16 Voxer 17 Slack 18 GroupMe 19 IM+ 20 Tango 21 Email 22 Gmail Your code must be compatible with existing php code that counts and saves count each time link is shared.

    $53 (Avg Bid)
    $53 Avg Bid
    20 bids

    ...underwater acoustics such as (SPL, TL, SL, impedance matching) and detailed explanations with comments. All the spesific data will provided. Instructions as follows The acoustical test pool for this study is 8,2 m x 4 m x 4,2 m in dimensions were used. The acoustical set up consists of two sections as, outside of the test pool and inside the test pool. An acoustical signal generator and an oscilloscope (Tektronix mso2014 mixed signal) generates the outside acoustical section. The underwater section consists of a transducer and five hydrophones inside the pool for measuring scattering, reflection and transmission data of test plates as shown in attachment. 80khZ, 85kHz,90khz, 95khZ and 100khZ choosed as test frequencies. A stainless steel test plate with dimensions 50 cm x...

    $98 (Avg Bid)
    NDA
    $98 Avg Bid
    4 bids

    ...has been shut off by a text and email. the administration panel will be available on the PC and a lite version for the admin phone. The primary software would be installed on your computer, or a simpified version would be installed on your phone. the mentoring and gps.. would be installed on your child's phone, where you as a administrator would be able to locate your family member by a gps signal from there phone. The system would also pre record a child's last know location and would pre record back up of one day recording upon initiating the phone devise. The color schemes will be determined upon award, although the back end is critical and should work as in the blue print. Please submit a bid if your a company that can only complete a operating version for P...

    $3312 (Avg Bid)
    Featured
    $3312 Avg Bid
    41 bids

    Hello, I need an Arduino Nano program to run a nema17 stepper motor with a 8825 driver. It must be co...until the desired speed. The direction of the motor and D8 and the pulses D9. D7 must be activated when the motor is stopped. The maximum speed, the curve of (acceleration, deceleration) must be configurable. I have two code examples to show what I need. The first one illustrates the good configuration with a good control but the engine starts without acceleration with noisy or disturbed signal. The second code illustrates well the library to use because the engine runs very well and fast with a good quality parameterized acceleration. So I need someone who can write a code from these two examples. Thank you, Claude Translated with (Sorry by that ;)

    $107 (Avg Bid)
    $107 Avg Bid
    27 bids

    Hello Katy, This is Vinit from Deloitte. This is your direct hire request. Please refer to my email before accepting the engagement. Thanks

    $2189 (Avg Bid)
    NDA
    $2189 Avg Bid
    1 bids

    An automatic Braking system is an intelligent mechatronic system includes an Ultrasonic wave emitter provided on the front portion of a car producing and emitting Ultrasonic waves. An Ultrasonic receiver is also placed on the front portion of the car operatively receiving a reflective Ultrasonic wave signal. The reflected wave (detected pulse) gives the distance between the obstacle and the vehicle. Then a microcontroller is used to control the speed of the vehicle based on the detection pulse information to push the brake pedal and apply brake to the car stupendously for safety purpose.

    $345 (Avg Bid)
    $345 Avg Bid
    11 bids

    Hi Vladimir G., I have a Tradingview indicator project needs help. Here is the long logic For every K bar that cross up Liner Regression line (code "Humble LinReg Candles" from ugurvu), we start to plot the score under the bar. Below is the list of items that counts as 1 point. * Today's high higher than previous day's high * K>=D and D between 20 and 80 * Bot signal (code "UT Bot Alerts" from QuantNomand) Same for short logic but crossing down the line.

    $150 (Avg Bid)
    $150 Avg Bid
    1 bids

    I have the Matlab code of signal processing and I want to convert it to C++. Let me know if u can do that.

    $150 (Avg Bid)
    $150 Avg Bid
    50 bids

    In this case, I need the surface data to be entered from an external device called ToolScan. At first, the data sets of mark and test mark were rotated using the ToolScan software LIM Lucia Forensic 2019 to align the striations. Next, five signatures per mark and test mark were extracted from the data sets in areas of least disturbances and imported into MATLAB. In the pre-processing, all signatures should be aligned to the x-axis by subtracting the moving average, discarding the low-frequency components and keeping the high-frequency components. Noise reduction was performed by a low-pass filter. In the next step, the five signatures of each mark and test mark were aligned by normalized cross-correlation and then averaged. The averaged signatures of mark and test mark were then compared u...

    $90 (Avg Bid)
    $90 Avg Bid
    24 bids

    ...calculations of product dimensions, drawing sketches of product ideas, and designing mockups of proposed products. Develop and complete projects Sourcing of raw materials. Purchase electronics device and equipments depending upon project needs Troubleshooting embedded systems and diagnosing errors, malfunctions, or inefficiencies firmware drivers for hardware peripheral ICs. Analog, Digital, mixed signal, wireless & rf electronics design. Microcontroller (Atmel, ST, Renesas, Microchip, ARM etc.) based system design,development, and testing, Embedded C/C++ Programming. Implementing effective repairs, modifications, and upgrades to the embedded systems Schematic creation according to hardware design and PCB layout design with implementation using CAD tool (Altium) GSM Module, G...

    $12 / hr (Avg Bid)
    $12 / hr Avg Bid
    27 bids

    ...candle represents an hour. Signal candle Can Only be identified between 5am and 10 am GMT. Signal Candle must be larger than the candle behind it and have a higher high and higher close. The signal candle must Open and close within the lower 1/3 of the body. Entry 1) IF Signal Bar is spotted from 5am to 10am GMT (a Pin bar which can be green or red with an open or close within the lower third of the body. Needs to be a larger candle than the candle prior to it THEN Check to see if there is a bullish candle before it with a higher close and a higher high closing in the top 1/3 of the candle (green). Also Signal Candle must be larger than the candle behind it and have a higher high. 2) IF above is true THEN place a Stop Sell order 1 pip below the low...

    $182 (Avg Bid)
    $182 Avg Bid
    11 bids

    I want to backtest the chandelier exit indicator (by everget) in tradingview backtester, b...would love to be able to be able to adjust the atr parameters, run a optimizer, test different pairs on different time frames. I would love for the strategy to use the heiken ashi candles for the indicator, but have the backtesting result use the japanese candles to get the real backtesting numbers. I need the strategy to place a long on the buy signal and close the previous short (if one exists). I need the strategy to place a short when the sell signal comes up on the indicator. I would be great to backtest leverage as well. In addition include the take profit and stop loss as is mentioned here: @BitcoinShrimps/chandelier-exit-zlsma-the-best-day-trading-tool-ever-6145f3255d76

    $194 (Avg Bid)
    $194 Avg Bid
    17 bids

    PLEASE READ the DESCRIPTION before APPLY Need an electrical/electronics engineering background researcher, (preferably Ph.D.) to do the parts of the simulation in a research paper and enhance its quality by adding a few more related simulation results. Skills and Major required for this job: MATLAB / Python MIMO Array Signal processing

    $51 (Avg Bid)
    $51 Avg Bid
    12 bids

    We need a telegram channel that will be automated and giving crypto news and crypto signals to our users. Check the photo to see example

    $130 (Avg Bid)
    $130 Avg Bid
    29 bids

    i need a a complete HW/SW solution to make a wifi microcontroller board that transmits/receives digital signals and connected to a camera. the signal should be received at our server with a web page controlling the board and the camera

    $763 (Avg Bid)
    $763 Avg Bid
    20 bids

    MPEG x264 custom encoder/decoder (bit level manipulation) need to be able to apply custom bit level manipula...Deliverables. Working source code working instructions on how to operate the source code in a linux based environment. Docker would be awesome. I need the frame to be manipulated after they are encoded to to I, P and B, but before they are encoded into Huffman Simulation results and security analysis 1) Visual test 2) Histogram analysis 3) Correlation coefficient analysis 4)Entropy analysis 5)Peak signal-to-noise ratio (PSNR) 6) Number of pixel change rate (NPCR) 7)Unified average changing intensity (UACI) 8) Structural similarity (SSIM) index 9)Encryption speed analysis like in paper

    $194 (Avg Bid)
    $194 Avg Bid
    15 bids

    implement a protocol decoder which can decode an SPI signal

    $134 (Avg Bid)
    $134 Avg Bid
    15 bids

    ...and then it sends alert as well as plots on the chart the buy signal and the same in a small table generated on the chart. However because of repainting it will show the signal for one second then dissapears; only when the candle closes then the final fixed signal stays. Need to fix it so that when the signal appears during the 9:15am candle it will stay and the signal in the table does not go away even before candle close. 3) Currently signal uses conditional statements to generate the words "CALL" or "PUT" depending on whether this is a short or a long order entry. Need to include the result "CALL" or "PUT" in the tradingview alert panel so that in my email it will show if CALL or a PUT as well as the c...

    $176 (Avg Bid)
    $176 Avg Bid
    19 bids

    ...transportable inside Altium Room for easy placement into our other designs Proto layout should be on a 1.2mm thick JLC Stack with Imdiance control and be no more than 18mm wide by 60mm long on a 4 layer very Clean layout following all TI guidelines for routing and part placement , Vbus power and CC lines need to be easily accessible from right side of board so we can connect to our existing PD controller signal path and Power Parth (please see iame of proposed layout image () easy filtration circuit for Vbus and proper CC line entry into circuit Fairly stright forward USB type C to type C PCB with Repeater ICs Need Completed and Reviewed Altium Project Ready for Prototype Fast as in before Friday February 3rd, 2023 Based on TI Redriver ICs, sample Idea is posted below b...

    $263 (Avg Bid)
    $263 Avg Bid
    30 bids

    ...what i mean about continuous orders based on set PIP movement. you just need to add SMA signal line to decide whether its BUY or SELL orders. INPUTS: SET PIP MOVEMENT AMOUNT: 200 (default, but can be changed to any amount) SET SMA: 20 (default but can be edited) TAKE PROFIT (TP): 200 (default but can be edited) LOT SIZE: 0.01 (default but can be edited) STOP LOSS(SL): NILL (default but can be edited) Currency: all currency, metals, crypto-usd markets (EURUSD as default but can use any currency) Timeframe: all TF (1 hr default but can be edited) Number of orders per trade: 1 (default) EA name: DANNYSOFTFX MACHINE VERSION 1.0 Email: EXPLANATION: IF MARKET PRICE IS BELOW SMA SIGNAL LINE OR CANDLE CLOSES BELOW SMA LINE, EA will CONTINUE TO OPEN SELL ORDERS (ONLY) FOR E...

    $81 (Avg Bid)
    $81 Avg Bid
    7 bids

    I want to create alerts, ideally text/email alerts when a divergence signal is forming on trading view. However I do use a private/invite only script indictor called caretakers divergence.

    $203 (Avg Bid)
    $203 Avg Bid
    15 bids

    I want to create alerts, ideally text/email alerts when a divergence signal is forming on trading view. However I do use a private/invite only script indictor called caretakers divergence.

    $228 (Avg Bid)
    $228 Avg Bid
    8 bids