Project report bluetooth chat jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    4,610 project report bluetooth chat jobs found, pricing in USD

    ...bids will be taken at face value with no opportunity to raise bids amounts. 2. The project is precisely defined in the attached document, version 3.3, and it is not anticipated that there will be a need to clarify any technical aspect. 3. This is a fixed priced project and must be delivered on time and on bid budget, according to the Freelancer's initial

    $94 (Avg Bid)
    $94 Avg Bid
    6 bids

    The unit will have lights and music that connects via bluetooth to a phone. The lights should have several different abilities to change based upon voice command. One will be a flashlight ability. Will be charged by non-removable battery which should last at least four hours. Should have the ability to recharge via USB

    $35 / hr (Avg Bid)
    $35 / hr Avg Bid
    10 bids

    We need a simple android app to communicate an Android tablet with an Arduino board through Bluetooth. The app should have two buttons and should send commands to the Arduino board when the buttons are pressed. Also the Android board has three switches and the app should indicate when they are pressed. Pls refer to the attachment. Pairing is done

    $177 (Avg Bid)
    $177 Avg Bid
    18 bids
    LOW POWER OUTDOOR POSITIONING 3 days left
    VERIFIED

    DECAWAVE DW1000 + GPS + BLUETOOTH BLE + IMU (BNO055) + BATTERY MANAGEMENT/CHARGING + KEY PAD CONTROL (TRANSMITTER/RECIEVER) + DISPLAY + TOUCH SCREEN (RECEIVER) + MCU (TBD) Morre deatils once selected

    $17 / hr (Avg Bid)
    $17 / hr Avg Bid
    17 bids

    I have product idea, I need to fit a mic, bluetooth, battery to last up to 8 hours of talking and a charging unit fitted into the design of this product. I have a pair of Bose bluetooth earphones, and it exteremly small, the charger attaches to the ear piece and the bluetooth and battery is in the one side of the earphones. So i'm sure the parts must

    $13 / hr (Avg Bid)
    $13 / hr Avg Bid
    5 bids

    i am looking for a beacon (BLE5) based indoor navigation for complex buildings/offices using mesh topology. Need expert in BLE5, android/iOS

    $1583 (Avg Bid)
    $1583 Avg Bid
    12 bids

    Bluetooth Vulnerability CVE-2018-5383 deals with the validation fault in cryptographic key pairing mechanism in Bluetooth 4.2. I need some expert who can 1. theoratically and diagramatically explain the ECDH Vulnerability 2. write a paper on minimum 15 cryptographic exploits on the CVE-2018-5383 vulnerability in detail and diagramatically and precautionary

    $216 (Avg Bid)
    $216 Avg Bid
    3 bids

    Bluetooth Vulnerability CVE-2018-5383 deals with the validation fault in cryptographic key pairing mechanism in Bluetooth 4.2. I need some expert who can 1. theoratically and diagramatically explain the ECDH Vulnerability 2. write a paper on minimum 15 cryptographic exploits on the CVE-2018-5383 vulnerability in detail and diagramatically and precautionary

    $25 (Avg Bid)
    $25 Avg Bid
    1 bids

    We are looking to rotate one of the connected 12v DC motors to 360 degree when a bluetooth messages is sent using android mobile via Arduino uno. This device should be connected with 30 to 50 motors given some number/address or id. Mobile phone should send a command to rotate one of them by specifying its id/name or address. As a end product we want

    $582 (Avg Bid)
    $582 Avg Bid
    33 bids

    The project detail is here [login to view URL]

    $1179 (Avg Bid)
    $1179 Avg Bid
    19 bids

    A php script is running on a Raspberry PI 3 B+. From that script, I need to send text messages (0-30 chars) to an Android phone using BLUETOOTH connection. The phone connects to the Raspberry using predefined MAC address and passkey. Only one user can connect to the Raspberry. The app shows a popup message, user can acknowledge or delete the message

    $194 (Avg Bid)
    $194 Avg Bid
    10 bids

    Bluetooth Vulnerability CVE-2018-5383 deals with the validation fault in cryptographic key pairing mechanism in Bluetooth 4.2. I need some expert who can theoratically explain and write a paper on minimum 15 exploits on the said vulnerability in detail and diagramatically and precautionary measures that must be taken to stop that vulnerability. Also

    $56 (Avg Bid)
    $56 Avg Bid
    3 bids

    Exploitation of Cryptographic Bluetooth Vulnerability in CVE-2018-5383 Bluetooth Vulnerability CVE-2018-5383 deals with the validation fault in cryptographic key pairing mechanism in Bluetooth 4.2. I need some expert who can theoratically explain and write a paper (along with presentation) on minimum 15 exploits on the said vulnerability in detail

    $172 (Avg Bid)
    $172 Avg Bid
    8 bids

    ...the next 2 months. See the attachments for the board you will need to make. Here are the parts I will ship to you: https://www.amazon.in/ESP32-Development-Board-CP2102-Bluetooth/dp/B074ZPWVVQ/ref=sr_1_4?ie=UTF8&qid=1547633984&sr=8-4&keywords=esp32 https://www.amazon.in/REES52-R3_400-Starter-Arduino-Breadboard/dp/B01FCH95KG/ref=sr_1_13?ie=UTF8&qid

    $13 / hr (Avg Bid)
    $13 / hr Avg Bid
    13 bids

    I would like assistance in designing and building. The need is a system that works with OBD (in a automobile) and bluetooth. If you are familiar with these systems, I need you.

    $53 / hr (Avg Bid)
    $53 / hr Avg Bid
    17 bids

    Add the Bluetooth HID profile to existing keyboard app. Add a swipe from edge feature to display a customizable launcher. Need a freelancer who is willing to work together in developing this unique app. Developer will also get development credits in the finished product.

    $456 (Avg Bid)
    $456 Avg Bid
    4 bids

    ...developed for this too. A unit with the ability to sense tilt, rotation and a physical distance would be required. This unit would then have to communicate to the built app via Bluetooth technology. I have attached an image of a person using the product for your reference. The tilt and rotation would be required to determine the bar position and the distance

    $2214 (Avg Bid)
    $2214 Avg Bid
    54 bids

    You can use the WinRT API if you like. I can work with you to test with my device on this end. Everything must be in C++ and will be used in an existing Qt project. The project will be considered complete when; 1. You have provided a C++ class that compiles on Windows 10. 2. The class advertises a service. 3. The class is able to have the UUIDs and

    $105 (Avg Bid)
    $105 Avg Bid
    6 bids

    We need Android developer who should have good experience of debugging Bluetooth low energy devices and can fix the connectivity issues. Source code is Available.

    $30 (Avg Bid)
    $30 Avg Bid
    1 bids

    I need an application to see a list of bluetooth devices, pair up if there is not and remember the device I made the connection to. The application will load a series of data using the REST API. I have to search through the data and send the information to the server, after which I will receive new data. New data will be displayed as clickable boxes

    $523 (Avg Bid)
    $523 Avg Bid
    30 bids

    I need a software dev to create a virtual com port windows data parser app. SMART Bluetooth experience mandatory

    $21 (Avg Bid)
    $21 Avg Bid
    2 bids

    ...Houston, with a background in software and robotics. My project uses real-time image recognition software in an Android app to control a robot using Bluetooth. The app uses a smartphone camera as its video source, comparing the live image with a user-selected static image. Then the app uses Bluetooth to direct a robot to paint the image. As the robot paints

    $4464 (Avg Bid)
    $4464 Avg Bid
    29 bids

    Need to develop PCBs with embedded Nordic Bluetooth Chipsets for communication between In-House Hardware and Software

    $11 / hr (Avg Bid)
    $11 / hr Avg Bid
    11 bids
    $52 Avg Bid
    5 bids

    We had configured Odoo POS in a cloud server and we require to connect a bluetooth thermal printer for printing bills from the Odoo POS. Possibly from Browser, also we has provided an android app running Odoo in a webview where printing must also be done using app. We can provide printer SDK

    $461 (Avg Bid)
    $461 Avg Bid
    10 bids

    I need a program for WINDOWS to communicate with Arduino using bluetooth, I need to connect to the Arduino, once i am connected i need to download the eeprom data to my pc and then clear the eeprom, Just a simple program with a couple of functions

    $166 (Avg Bid)
    $166 Avg Bid
    19 bids

    We are a team who is developing a customizable bluetooth low energy remote control to control computers, phones, tablets, and also other devices. The remote control has an ergonomic good looking design and the software will allow a very high level of customization. We have started developing software, but decided to start again with a more advanced

    $1427 (Avg Bid)
    $1427 Avg Bid
    25 bids

    I have a xamarin android app I need to print with Bluetooth printer so I need to add the code for that part

    $146 (Avg Bid)
    $146 Avg Bid
    5 bids

    ...academic requirement. We would like two android Bluetooth Low energy (BLE) applications in such a way that one master device will act as Transmitter (with transmitter app) and all other devices having client application will act as receivers. We need to send data between transmitter and Receiver(s) using Bluetooth low energy (BLE). Example: There are 10

    $191 (Avg Bid)
    $191 Avg Bid
    15 bids

    Hello writers, We need article writer to help updating our blog on the website. Native English Speakers [login to view URL] main products are Wireless Earbuds/Bluetooth Headphones/Bluetooth [login to view URL] may view our website and Amazon storefront first. [login to view URL] [login to view URL]

    $38 (Avg Bid)
    $38 Avg Bid
    15 bids

    Hello writers, We need article writer to help updating our blog on the website. Native English Speakers [login to view URL] main products are Wireless Earbuds/Bluetooth Headphones/Bluetooth [login to view URL] may view our website and Amazon storefront first. [login to view URL] [login to view URL]

    $24 (Avg Bid)
    $24 Avg Bid
    16 bids

    ...for communication trial purpose only. Pls have a look on attached material. I need some one that have experience with MQTT connections, MySQL connection, JSON handling, Bluetooth File Upload and Receival. I need the layout like the PPT file. ** I need this job to be developed in 1 week, but slides 1,3 and 4 I need ready in 2 days to validate it first

    $627 (Avg Bid)
    $627 Avg Bid
    25 bids

    ...basic mobile app for trial purpose only. Pls have a look on attached material. I need some one that have experience with MQTT connections, MySQL connection, JSON handling, Bluetooth File Upload and Receival. I need the layout like the PPT file. ** I need this to be developed in 1 day once my hardware developer is in a hurry to try the communication,

    $205 (Avg Bid)
    $205 Avg Bid
    6 bids
    $32 Avg Bid
    3 bids

    Please read before bid: - MY BUDGET IS FIXED AT 80 AUD. Any bid over this limit is ignored. - You must have a previous experience with Bluetooth on Android at low level to be able to complete this task so please don't bid if you have no experience with Low Energy BLE. And about the task.. I need an android app that utilises mobile BLE at low level

    $150 (Avg Bid)
    $150 Avg Bid
    9 bids

    ...Finland. I can do this myself, but I hurt already and I think I should hire local help. Shoestring budget, first phase less than $20k NTD to probe quality/price -ratio. This project can be considered as prototyping for a startup company "Instant Homes" that would be created with the help of a willing co-founder in Taipei area and my landlady who currently

    $5 / hr (Avg Bid)
    $5 / hr Avg Bid
    17 bids

    ...experienced React Native developer who has previous experience writing apps to communicate with Bluetooth devices. We need to develop a mobile app written in React Native to deliver the following 2 functionalities: 1- Collects data from beacons (Bluetooth): We will provide the APIs that can be used for mobile and device communications (these APIs are

    $412 (Avg Bid)
    $412 Avg Bid
    9 bids

    ...experienced React Native developer who has previous experience writing apps to communicate with Bluetooth devices. We need to develop a mobile app written in React Native to deliver the following 2 functionalities: 1- Collects data from beacons (Bluetooth): We will provide the APIs that can be used for mobile and device communications (these APIs are

    $185 (Avg Bid)
    $185 Avg Bid
    14 bids

    You can use the WinRT API if you like. I can work with you to test with my device on this end. Everything must be in C++ and will be used in an existing Qt project. The project will be considered complete when; 1. You have provided a C++ class that compiles using Qt 5.12 & VS 2017 on Windows 10. 2. The class advertises a service. 3. The class is able

    $120 (Avg Bid)
    $120 Avg Bid
    6 bids

    ...directories and have them build with the rest of the project * src/adapters * src/constants * src/hooks * src/structs * src/tasks * src/utilities - Make any code changes necessary to get the existing code to be able to upload using the Dialog SUOTA app - Demonstrate that the code can be upgraded over Bluetooth and that the new version of the code works

    $23 / hr (Avg Bid)
    $23 / hr Avg Bid
    10 bids

    In order to make multiple arduinos - 6 or 7 - communicate simoultaneously sending data to one computer

    $84 (Avg Bid)
    $84 Avg Bid
    11 bids

    I need simple App this connect with device with bluetooth, emulating serial port UART BLE, at 9600,8,1,n put a indicator red is disconected green is connected. Put a text input (from phone Android) Put button to send Put a text view for ouput (from device) In java Budget fixed $ 50 USD Time to delivery 2 days I need the source code

    $50 (Avg Bid)
    $50 Avg Bid
    9 bids

    My company is building a small, custom bluetooth speaker, intended for kids, that has functionality both with and without an accompanying app. The two most distinct features are the speaker's shape, and ten custom ports for buttons/light extensions. I am looking for a partner FOR THE DEVICE ONLY (not the app) who has both the electrical and industrial

    $1347 (Avg Bid)
    $1347 Avg Bid
    33 bids

    Make a Digital Signage device. I need you to build and debug 4 of these systems so GIVE COST TO INCLUDE ALL OF THIS INCLUDING FAB, ASSEMBLY, BOM! Use inexpensive microprocessor from Rockchip, Allwinner [login to view URL] should be Android. Decode 4K a/v stream, record from microphone input. Download and run Android apps. No AI, neural network or image recognition required. Be able to drive dua...

    $2674 (Avg Bid)
    $2674 Avg Bid
    19 bids

    ...would have a multi-tenant structure in which it can be deployed for multiple clients and multiple registers per client. The app should be able to seamlessly connect with a bluetooth printer and a cash drawer. It should have all the features of a standard POS system. We are looking for a solution similar provided by VendHQ or Lightspeed. Companies or

    $4103 (Avg Bid)
    $4103 Avg Bid
    71 bids

    This Project is to create a system to allow a mobile device to stream music to multiple Bluetooth speakers/headphones simultaneously. It has two main deliverables: 1. A hardware device which includes the Bluetooth receiver and transmitter(s). The successful bidder will need to identify a suitable set of standard components and (if necessary) provide

    $2716 (Avg Bid)
    $2716 Avg Bid
    21 bids

    ...He will then connect with Bluetooth with the Karoake app and sing the song. The app will have controls and features similar to meragana. pitch, echo , volume, tempo Scale Live display of notes Recording Social media sharing etc). User can buy the mic of the client and connect his handset through bluetooth with the app and use the same

    $4295 (Avg Bid)
    $4295 Avg Bid
    73 bids

    Looking for someone to make small application to change the Bluetooth name on devices that have Nordic chipset.

    $58 (Avg Bid)
    $58 Avg Bid
    7 bids