Pwm servo multisim jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    2,284 pwm servo multisim jobs found, pricing in USD

    first I have been control the speed of dc motor using 8051 microcontroller (open loop control ) to get the reading , this is the reading: pwm values: Input={32,37,42,47,52,57,62,67,72,77,82,92,97,102,107,112,117,122,127,132, 137,142,152,162,172,182,192,202,212,228,233,238,243,248,253} speed values: output={0,38,52,72,84,104,115,133,141,158,165,192,204,212,225,231,244,248,254,261,270,276,286,3...

    $120 (Avg Bid)
    $120 Avg Bid
    9 bids

    Design a system using a matrix keypad as the input to control a PWM output signal to an electric motor (12 VDC). Show the speed % (0 to 100) on a 2x16 LCD display. PIC18F45K50 MPLAP XC8 (software) Need it done fast!

    $168 (Avg Bid)
    $168 Avg Bid
    28 bids

    I am working with some RGB Led Strips. I want to be able to control the colour and brightness of these strips. Unfortunately, I can't use the normal controllers that are sold for these types of RGB LED Strips. I need something like a PWM 25KHZ+ system so they don't flicker on cameras shooting at high frames per second. If you can see the image I have attached, I would love something l...

    $191 (Avg Bid)
    $191 Avg Bid
    31 bids

    Project retool and modification reputed client on siemens platform for machining and assembly line. project duration 6 months may be extended as per modification plan change. Knowledge of siemens step 7 , wincc-flex HMI, starter motor and 840Dsl CNC and State logic and experience of working on VFD and servo drive preferred. Interested candidate kindly forward their numbers quickly -requirement u...

    $26 / hr (Avg Bid)
    $26 / hr Avg Bid
    13 bids

    I need someone that has a raspberry pi 3 and can screen share with me and show me how to get some buttons working and maybe a servo motor. I need this within the next few hours

    $21 / hr (Avg Bid)
    $21 / hr Avg Bid
    18 bids

    RUN FreeRTOS on STM card NUCLEO-F767ZI and X-NUCLEO-IHM03A1 in IAR IDE Port both Cards to FreeRTOS including all peripherals and comm ports: SPI, i2c, UART, ethernet USB, Timers, PWM Creating multiple tasks. In these tasks, toggling 3 user LEDs, spinning Nation Instrument 2phase 4wire motor NEMA ST17-4 Write C test code for all pripherals and comm ports The code must be C and project in IAR IDE. ...

    $364 (Avg Bid)
    $364 Avg Bid
    2 bids

    Looking for a design on a Variable Voltage regulator, DC-DC Buck Boost Converter Source 12vdc (car battery) Output Range is 0vdc to 24vdc @ 360W output. This unit will be used to power a dc motor that is attached to a extension cable of up to 200'. Specifications: non-isolated step-up module Input voltage range: DC 10V~24 Input current: 10.5~30V input voltage, maximum current 30A Output vol...

    $581 (Avg Bid)
    $581 Avg Bid
    23 bids

    The 3 phase sinusoidal micro controlled generator must control and stabilizing speed of the low power BLDC motor (less than 15W, ~15 - 24VDC). Must not use the PWM. Needs to use 3 DAC channel and powerful low frequency amplifiers like outputs. Display indication and PC control for checking. For exemplar, the processor could be STM32E373 or other. The details will be later.

    $635 (Avg Bid)
    $635 Avg Bid
    18 bids

    Looking for Design Engineer for Isolated DCDC GaN based High Efficiency 120watt Ultra Compact Schematic based on Navitas GaN Power ICs, need to create Schematic and Proto Layout in Altium 40-60V Rectified input, to 20V 6A Clean DC output, regulated down to 0.1V More Details Provided once NDA signed

    $648 (Avg Bid)
    $648 Avg Bid
    13 bids

    I need to run 4 cable robot system on rapsberri pi 3(fell free to suggest a better solution), so raspberry pi3 runs stepper drivers and reads analogue joysticks, or any hobby radio transmitter with cppmpwm output. All kinematics equations will be provided if needed(it`s opensource). Feel free to port any existing Arduino project. I got following questions 1 - if there is enough outputs on raspbe...

    $158 (Avg Bid)
    $158 Avg Bid
    8 bids

    i need your development small program use arduino, main function is to trigger the servo motor according to user input times(hour), parts include is arduino nano, RTC, OLED display, push button, switch, LED.

    $78 (Avg Bid)
    $78 Avg Bid
    31 bids

    This includes the development of vhdl code for PWM generator, PID controller, flux estimator etc. Training would be web based on Skype or webex.

    $1108 (Avg Bid)
    $1108 Avg Bid
    4 bids

    Hi, I´m developing a VTOL Y FixedWing. I have the frame almost done, and everything else. I need someone who can program the PixHawk to takeoff and land automaticly on copter position. The UAV have to be hybrid between plane and copter, depending on the speed of the model. It has 3 rotors, one on the tail and two on the wings wich rotate 90º with a servo (Like in the picture). Video: [...

    $266 (Avg Bid)
    $266 Avg Bid
    4 bids

    DSP - Digital Signal Processing Guru Wanted I am looking for an Embedded programmer who can develop a DSP based PID Controller for a servo-motor. The PID Controller will be the heart of this project, it will some analog circuit but minor and will be provided. Data to the controller will be digital 16 bit SPI, motor feedback is 16 bits analog-level. Must know DSP and be able to write the code in C...

    $1114 (Avg Bid)
    $1114 Avg Bid
    33 bids

    I need some graphic design. I need to design a commemorative poster for our bands first gig. We have band logo and main character - however need to confirm details of date (Friday 30 Aug 2019, and venue (Servo Food Truck Bar, Port Kembla) other bands on the bill TBC.

    $19 (Avg Bid)
    $19 Avg Bid
    74 bids

    For bicycle renting business we need a board with following requirements: -Will run on solar power with battery. -Will have cost efficient 3G/4G Breakout Module (e.g. like BK-SIM7020E) -Will have a GPS module -Will have a servo to lock and unlock the bike -It will send the location and the lock state of the bike to the database periodically(For Example GPS Data every 60 seconds and lock state when...

    $630 (Avg Bid)
    $630 Avg Bid
    11 bids

    I have a new project for circuit and PCB design. It uses an STM32 MCU (exact model to be decided with freelancer) with several interfaces to connectors: - I2C interface to DAC chip on the board with some complexity behind it (I have schematic design, but good to be checked upon copying) - 10 PWM pins connected to timers, 2 x ULN2003 for 8 of the outputs, 2 transistors for the others - 5 ADC input...

    $597 (Avg Bid)
    $597 Avg Bid
    39 bids

    Hi Bolkar A., I noticed your profile and would like to offer you my project. We can discuss any details over chat. Let's review the project before you accept. The project is to port or to rewrite it from the ATMega 8 to the ARM STM32F407 micro. The controller is basically a PWM Controller controlled by either a digital encoder or a PC. It can also do frequency modulation. I can provide most ...

    $500 (Avg Bid)
    $500 Avg Bid
    1 bids

    My company requires the completion of CAD, PROTOTYPE AND GOLD SAMPLES for my Ergonomic Reflexology Massage shoes. Mechanical, electrical, schematic design, bluetooth capabilities, servo motors and rechargeable batteries.

    $2731 (Avg Bid)
    $2731 Avg Bid
    12 bids

    We are looking for embedded C programer who can write code in DSP controller for inverter application. Please contact us at [Removed by Freelancer.com Admin]

    $218 (Avg Bid)
    $218 Avg Bid
    12 bids

    Hello, I have a project where I need to control the speed of an DC motor with the help of arduino. I communicate with the arduino passing the values through the Serial. Now what I need is to control the motor speed depending on the distance to the object, this can be done through PWM or PID, I leave it to the developer's discretion. Thank you for contacting me to provide more information.

    $29 (Avg Bid)
    $29 Avg Bid
    11 bids

    I would like a project buit in Multisim. You should exclude a traffic light simulator and a digital watch. (College small project)

    $42 (Avg Bid)
    $42 Avg Bid
    9 bids

    I would like a project built in Multisim with the following components: 1. Arduino Uno R3 2. LCD Display 3. Soil Sensor 4. Temperature sensor 5. Light sensor 6. Humidity sensor. 7. Touch sensor

    $113 (Avg Bid)
    $113 Avg Bid
    10 bids

    General Setup / Briefing ==================== This Electron App generally consists of 3 major parts. The renderer process starts the main part which is in [login to view URL], then 1) Communication with a NodeJS RestAPI Server happens via [login to view URL] 2) A Tokbox WebRTC Session is established via [login to view URL] when a user connects with Browser to the electron app. This part ([logi...

    $144 (Avg Bid)
    $144 Avg Bid
    11 bids

    6 Legged and 2 Arms walking robot with servo control Size of the robot will be 60cm x 60cm x 60cm (L, W, H) nVIdia’s Jetson TX2 board to be used Sensors such as LIDAR, Temperature and GPS to be supported Built-in camera position of Jetson board to be changed Two external cameras support is needed GSM Module to be supported Battery support is needed The two arms will have fans (cutter) at en...

    $8104 (Avg Bid)
    $8104 Avg Bid
    8 bids

    Require an app to control the speed of a hydraulic motor via a PWM valve. The app will control a machine and the faster the machine is driven forward the faster the hydraulic motor needs to turn. We will use GPS speed and an actual speed pulse from the machine to determine the output signal to the PWM valve We need 12V controller with Bluetooth connection to control the PWM valve and return the ...

    $1266 (Avg Bid)
    $1266 Avg Bid
    38 bids

    Arduino controller for 3 servo with timming control

    $56 (Avg Bid)
    $56 Avg Bid
    1 bids

    Looking for an expert in Electric Circuits and Networks. Need to solve simple questions related to Mesh Analysis Nodal Analysis

    $28 (Avg Bid)
    $28 Avg Bid
    14 bids

    need to design a traffic crossing system. freelancer should have good grip on circuitory and needs to have good skills on designing circuits in simulators like multisim, OrCad etc.

    $52 (Avg Bid)
    $52 Avg Bid
    8 bids

    I would like to Design, simulate, build, and analyze a single phase, DC to AC PWM inverter for my company where we sell inverters. the inverter must provide 12 VAC rms to a resistive and inductive load, with a 12 VDC voltage source using one of the methods of Pulse Width Modulation. Communicate your results effectively

    $271 (Avg Bid)
    $271 Avg Bid
    17 bids

    The project contain the following materials: 1. Arduino nano 2. L298 module 3. 1 Potentiometer for adjusting speed of motors (it adjust speed for booth 2 motors in same time) 4. 2 motors (12v) connected to l298 module What i need to do this project: 1. arduino need to be connected to L298 module 2. L298 module need to be connected to 2 motors of 12v 3. i need to control the speed of the motors ...

    $29 (Avg Bid)
    $29 Avg Bid
    20 bids

    Hi, I need a person or a team who can help me transform an idea to a physical device. In short i need help with: 1. Create a custom arduino board to suite my need. The board needs a display and some buttons. 2. Create firmware to do the things i want. Show something on the display and manipulate PWM signals. The firmware do also need to log everything that happends to a sd card. 3. Create enc...

    $666 (Avg Bid)
    $666 Avg Bid
    35 bids

    I have a requirement for a PWM based three phase Micro Hydro Controller or ELC to be designed and prototyped. The ELC( Electronic Load Controller) is intended to control the voltage and frequency of a synchronous generator of a stand- alone micro hydro power generator. The generator frequency variation is in inverse proportion to the loading condition where ELC maintains constant loading of genera...

    $4925 (Avg Bid)
    $4925 Avg Bid
    6 bids

    I’ve 3d printed 6 DOF robotic arm but I couldn’t not programmed it using Arduino software, following an article “howtomechatronics” but at the end the code and it’s control software do nothing, my robot is fully assembled with servo motors, Mega boards & electronics are working great in tests. I need a simple fixed code to upload it in Arduino Board to pick up p...

    $11 / hr (Avg Bid)
    $11 / hr Avg Bid
    14 bids

    I need an Application to record potentiometer movement into stepper motors and servo through Arduino using visual studio app, please check the ​attached file for more detail.

    $250 (Avg Bid)
    $250 Avg Bid
    3 bids

    Lock mechanism is designed using a servo driven from 30 to 120 degrees. I need a PsoC 6 set up to drive the servo from app input buttons. As a lock it needs security as in password for each board. Battery meter and time to recharge indicator. We would collaborate on the app side.

    $1152 (Avg Bid)
    $1152 Avg Bid
    11 bids

    I had done a project on digital RO panel, multi mode servo control panel, railway inverter card, and many small projects which are used in colleges

    $71 (Avg Bid)
    $71 Avg Bid
    1 bids

    Ko je sef v stanju pripravljenosti sveti rumena [login to view URL]ča dioda se pokaže ko je koda nepravilna,zelena ko je koda pravilna. Ko je koda pravilna, se odklene servo za zaklepanje. Lp Tadej Cajnar

    $27 (Avg Bid)
    $27 Avg Bid
    2 bids

    SMALL WEATHER STATION (Karachi, Pakistan preffered) Arduino based project involves construction, programing in C, and evaluation of a microcontroller-based weather station that is able to continuously sense: (1) wind speed, (2) temperature, and (3) rain, and then output the sensed values as follows: (1) wind speed on a mechanical servo-based gauge, (2) temperature on a LED barograph, and (3) rain...

    $128 (Avg Bid)
    $128 Avg Bid
    26 bids

    I have desktop C# app that sends serial data to the Arduino the data comes from usb joystick the data is 0-65485 0 = maximum to the left 65485 = maximum to the right so I get these in Arduino serial from C# I want to control a servo accurately with degree for that range of data the servo I am using is from 0-3600 degree I will provide the manual of the servo

    $33 (Avg Bid)
    $33 Avg Bid
    22 bids

    Hi, I have a servo motor with data sheet I have C# app which sends values of USB JoyStick ( 0-65485 ) 0 >> Fully Left 65485 >> Fully Right 32000 >> Center All I need to do is to control the servo by the joystick accurately how much you can write Arduino sketch for it ? it's very simple Thanks

    $20 (Avg Bid)
    $20 Avg Bid
    1 bids

    You will simulate following scenario: There is a man who wants to enter his home. 1)When he gets close enough to the door (it means getting into range of PIR sensor), output of PIR sensor will be HIGH. Getting HIGH output once is enough. 2) He should enter the password of the door using Keypad to get in his house. 3) If password is correct, door will be open using micro servo motor. (It means micr...

    $123 (Avg Bid)
    $123 Avg Bid
    5 bids

    I need someone to develop the mechanical component assembly for an auto servo system to extract and re-infuse biological fluids components in a closed system, and/or use a pull-push back and forth method to move the fluids from one vessel to another and repeat.

    $2226 (Avg Bid)
    $2226 Avg Bid
    17 bids

    Hello, i am relatively new to arduino and have very basic experience in programming. I am having problems to get my project working the way i want. The main thought behind this project is to be able to control a crane using a bluetooth HC-06 module and a android app. (also considered using potentiometer to control the servos, but found out it would be much cooler to controll it with my phone) It w...

    $42 (Avg Bid)
    $42 Avg Bid
    17 bids

    The project is about developing an Arduino based AC motor control for a record player. In a previous project we managed to generate a stable PWM signal with an Arduino Uno, that is later on filtered and amplified to generate a proper sine wave, that can be altered by frequency and amplitude to control a motor. The current version works fine with the exception that finetuning the generated frequenc...

    $270 (Avg Bid)
    $270 Avg Bid
    12 bids

    Hello, Kindly read the complete project description before placing a bid. Need detailed User Guide/Manual with step to step tutorial on how to assemble the parts and coding for Multifunctional Smart Car Kit for Arduino with 4WD chassis, Bluetooth Module HC06, Ultrasonic Sensor HCSR04, Line following Sensor. This car should perform the below 4 functions. • Function-1: Controlling smart car...

    $81 (Avg Bid)
    $81 Avg Bid
    8 bids

    Need help in developing c code for a biquad audio filter using the dsp features of the silabs efm32 series mcu,s, preferably the efm32wg series. Using the built in a2d, with an audio input of 2 volts p-p we need three pwm outputs corresponding to the amplitude of base, midrange and treble bands. preferably the codecs should be variable so the optimal bandwidths can be achieved.

    $480 (Avg Bid)
    $480 Avg Bid
    7 bids

    - Part time but Long Term opportunity - Small company looking for programmer with experience in motion control, automation, and open source to engineer & build automation solutions in a manufacturing environment. - Work along side Industrial designer to carry out vision but also creatively contribute to WIP one-piece continuous flow manufacturing solution. The ideal person will be: - Famili...

    $37 / hr (Avg Bid)
    $37 / hr Avg Bid
    26 bids

    I had worked on atmega controllers and made digital ro panel in which I used to control pump, flush, and cartridges, tds. Another project I made of multimode servo control card in which we used to display it on lcd and seven segement and show us low limit high limit, frequency, input and output voltages. Now recently I am making a project on underslung railway charger in which we used to display d...

    $14 (Avg Bid)
    $14 Avg Bid
    1 bids

    0-5Vdc input linear output which needs to be converted to 5-0-5Vdc (V curve) . Auxilary input 5Vdc to circuit price is important hence we prefer PWM output from MCU and by RC filter to analog output. All above in minimum 10 bit and maximum 12bit resolution. Response 200 Hz

    $110 (Avg Bid)
    $110 Avg Bid
    6 bids