Rms sav jobs
Looking for talented freelancers to create some awesome UI/UX animations and logo animations of some of our projects, similar to this: Please quote for 1 animation - and supply samples of previous similar work. MAKE SURE YOU QUOTE IS ACCURATE. WE AILL NOT BE NEGOTIATING
I am looking for a sound engineering professional who can appropriately adjust the RMS levels of my audiobook files in Audacity. The main objective of this task is to normalize the volume for a consistent listening experience across all sections. I can't get the files to pass the ACX on all levels. When I adjust one then another goes out of range. The ideal candidates should: - Have extensive experience working with Audacity and familiar with adjusting RMS levels. - Have a sound understanding of audio editing and processing for audiobooks. - Have a proven track record of audio work that involves volume normalization. Specifically, I require the RMS levels for my audio files to be set to -20 dB. Also, the noise floor to be repaired as currently it is too quiet. ...
I am seeking a professional logo designer to design a logo for my new consulting company. The company name is: SAV Healthcare Consultants My company primary serves the healthcare industry, but I do provide non-healthcare business marketing and service needs. Therefore the design does NOT have to have elements or designs in it related to healthcare. - A strong portfolio of modern logo designs - Excellent attention to detail I would welcome a variety of design ideas including color and typeface and the look can be modern and clean, or vintage or more classic in aesthetic.
I'm in need of a competent audio narrator for my non-fiction book. Here are my specific ...Experience with non-fiction narratives is highly desirable. Each file should have a constant bit rate of 192 kbps or higher, and a sample rate of 44.1 kHz. Each individual file must contain between 0.5 and 1 second of silence (room tone) at the beginning of file, before narration performance begins, and between 1 and 5 seconds of silence (room tone) at the end of file, after narration completes. RMS for each file must measure between -23dB and -18dB, with peak values below -3dB, and a maximum -60dB floor. No copyrighted materials or extraneous sounds (pages turning, etc.). Current book will be around 76 minutes long. Budget will be $120 MUST SIGN AUDIO ARTIST RELEASE AND COPYRIGHT ASSI...
I need the right expertise to seamlessly integrate my Jornaya Lead ID into my WordPress site. The end goal is to accurately track lead conversions on my site. Below are detailed expectations for your reference: - Data Capture: The integration should enable the capturing of Lead Source and Lead Engagement information upon conversion tracking. - Implementation: The Jornaya Lead ID integration needs to be achieved seamlessly, utilizing a WordPress plugin. Ideally, the suitable freelancer would be well-versed in WordPress and have prior experience in similar integrations. Familiarity with Jornaya's tools and an understanding of lead tracking mechanics will be of great advantage.
I need an expert developer who can successfully integrate the TT Door Lock API with the RMS property management software. The API is confirmed compatible, but requires a professional touch to ensure seamless functionality. Key Responsibilities: - Integration of TT Door Lock API - Enable door lock status monitoring - Implement remote door controls - Enable access control distributions Ideal Skills and Experience: Skilled in software development, specifically with API integrations, and has prior experience working with RMS property management software. Familiarity with TT Door Lock systems is a huge plus. Must be able to ensure seamless communication between the two systems.
...sku1; # AV_JSC_WEA017_I17870_F9 set Warehouses := ZFS LDI ASN SAV ESL; set Destinations := BE CH NL PL AT; set Marketplaces := ZLBENL ZLCHDE ZLNL ZLPL ZLAT; param AllowedWarehouseMarketplaceCombos: ZLBENL ZLCHDE ZLNL ZLPL ZLAT := ZFS 1 0 1 1 1 # ZLCHDE is not allowed for ZFS LDI 1 1 1 1 1 ASN 1 1 1 1 1 SAV 1 1 1 1 1 ESL 1 1 1 1 1; param initialQty := sku1 35; param storageCost := ZFS 0.42 # daily 0.014 LDI 0.065 ASN 0.085 SAV 0.12 ESL 0.1; param orderPrepCost := [ZFS, ZLBENL] 0 # Sheet printing 0 Picking 0 Order Prep 0 External courier 0 [LDI, ZLBENL] 0.8 # Sheet printing 0.15 Picking 0.1 Order Prep 0.2 External courier 0.35 [ASN, ZLBENL] 0.28 # Sheet printing 0.18 Picking 0.1 Order Prep 0 External courier 0 [SAV, ZLBENL] 0.48 # Sheet pri...
...currently in need of a skilled freelancer who can efficiently extract data from an SPSS file and deliver it to me in an Excel spreadsheet. Given that I'm on a Mac operating system, the individual should be well-versed in handling and converting files compatible with this OS. **Key Requirements:** - Familiarity with Mac operating systems. - Proficiency in handling SPSS files. - Ability to convert .sav files to .xlsx format without data loss. **Ideal Skills and Experience:** - Strong background in data management and analysis. - Experience in data conversion and extraction. - Proficiency in Excel and SPSS software on Mac. - Attention to detail for ensuring data integrity during conversion. The project does not require any analysis of the extracted data, simply an efficient ...
...integrate a Retail Merchant Services (RMS) payment gateway with my existing WooCommerce site. The primary focus will be on the payment transaction process, ensuring it aligns smoothly with my current shopping cart and checkout workflow. INTEGRATION WILL BE FORM (offsite CPI compliant) **Ideal Skills and Experience:** - Proven experience in WooCommerce and WordPress - Previous work with RMS gateway integration DEVELOPER - Guide - - Strong focus on secure transaction processing - Ability to maintain website aesthetics during integration **Requirements:** - Integrate RMS payment gateway ensuring high transaction security - Keep the user experience simple and seamless during checkout, as client visits RMS HPP form screen. - Ensure full compatibility
...must be able to answer any question that comes from his codes. My ambition is to create a trading software that must have the following features: 1. It must read trading instructions from a file (or the like), and can fire/modify/cancel orders at the best possible speed (as allowed by the infrastructure). I am going to use some Indian Stock Brokers API for this project 2. It must monitor the RMS measure also in real time basis. **Key Functionalities Required:** - **Real-Time Data Analysis:** The software should be capable of analyzing market data as it happens, ensuring decisions are based on the most current information. - **Automated Trading Strategies:** I'm looking for the capability to implement and execute trading strategies automatically, based on predefined crite...
I'm seeking an expert in audio editing to fine-tune my MP3 files (15hours audiobook) . The primary task is to adjust the RMS levels of each file, to ensure they all lie within a range of -23db and -18db. Ideal candidates should have: - Proficiency in audio editing software - Understanding of decibel levels and RMS adjustment - Expertise in MP3 file manipulation It's critical to note that this adjustment should be uniformly applied to the whole audio file. I expect every portion, from start to end, to meet the mentioned range. If you possess the outlined skills and have a keen ear for audio qualities, I would love to hear from you. Looking forward to perfecting my audio files with your expertise.
...several additional functionalities, including: - Export data feature: The application must have the capacity to export the visualized data for accessibility and further usage. - Zooming and panning capabilities: An interactive UI that allows users to zoom in & out and pan across the dataset for deeper analysis. - Data Manipulation: The ability to change the dataset based on a fixed formula (AC to DC RMS conversion) is indispensable. - Comparison tool: A feature to compare different data sets for comprehensive understanding. - Scalable Solution: The system should effortlessly handle up to 50,000 data sets. Ideal candidates should have substantial experience in Highcharts, dataset manipulation, data visualization, and web applications development. Familiarity with logarithmic...
...or news portal-like website where the user will comment/discuss some news or articles. We have a customised design for it. For various tasks, such as review, we plan to use plugins. This is a long term task (series of projects for right experts) in which we will make changes to one module at a time. For review, we are planning to use this plugin However, we want to make some customisations like adding minor features to it like: showing individual review score count, showing average, showing review number, reply option, unique review item option, emoticons (reaction) for reviews, sorting reviews, Grouping review items, Design correction as per the current theme. So, we need someone who has experience working in
...que vous avez déjà créez. Voici ce que je souhaite avec le maximum de précision. Market place multi vendeur Tout ce qui doit être possible sur le dashboard admin : commandes, catalogue, stock, réduction, gestion des clients, statistique, gérer client et vendeurs, envoi de mail automatique (inscription, commande, mise à jour de livraison, approbation et tout ce qui automatisable comme mail), SAV, message prédéfini, message avec utilisateurs (vendeurs et acheteurs) avoirs, panier, tableau de bord, réglage, multi devise, multi langue, multi taxe etc …. Je vais pas faire une liste de tout mais je voudrais avoir tout ce qu’il est possible d’avoir pour un admin de Market place. Possib...
I'm in need of a competent audio narrator for my non-fiction book. Here ...Experience with non-fiction narratives is highly desirable. Each file should have a constant bit rate of 192 kbps or higher, and a sample rate of 44.1 kHz. Each individual file must contain between 0.5 and 1 second of silence (room tone) at the beginning of file, before narration performance begins, and between 1 and 5 seconds of silence (room tone) at the end of file, after narration completes. RMS for each file must measure between -23dB and -18dB, with peak values below -3dB, and a maximum -60dB floor. No copyrighted materials or extraneous sounds (pages turning, etc.). Average book will be around 3 hours long. Budget will be $70 per hour of reading. MUST SIGN AUDIO ARTIST RELEASE AND COPYRIGHT ASSI...
...rate of 192 Kbps or higher. Read our Encoding Guide for further guidance. Bit Rate Method VBR File is not encoded in Constant Bit Rate (CBR). Read our Encoding Guide for further guidance. Peaks (dB) -0 Peaks exceed 0 dB. Reduce peaks to below -3 dB. Read Guidance - Section 1 - Adjusting High Peaks for further guidance. RMS (dB RMS) -23.9 RMS is too low. Raise the level of this file 0.9 dB. Visit Guidance Section 1 – Adjusting Low RMS Files on our Audiobook Production RMS Guide for further guidance. The Impact You'll Make: - You won't just be editing an audiobook; you'll be shaping the financial futures of countless individuals. - Your work will bring clarity and life to the strategies that have already proven their extraordina...
...(4280 mAh, 22.8V), would it be possible to use those batteries to power the larger product? Ideally if a case or compartment were made that the smaller batteries plugged into. Here's a link to the small battery... And here's the larger battery I'm trying to replace...
I need to complete a series of ten assignments using an SPSS program. Nine of them involve a series of 6-8 questions interpreting statistics questions. One of them involves creating a research report (7 pages not including title page, abstract, references, and appendix), based on an analysis of a data file (DATA540.SAV in Resources). The report should include an introduction based on the hypothesis and previous research from two of the shorter assignments. I have already purchased the SPSS program. Thank you!
230V (RMS) AC single phase supply. Full wave rectifier to convert to DC. Buck convertor to 30V to use for control circuit Boost convertor to 500v to use to charge battery Matlab to include ripple factor, form factor, power factor, efficiency ect.
...to be used across multiple mediums, but I am still undecided on the scope of platforms. I am looking for a creative freelancer to create an eye-catching logo that can meet all of my needs. The Logo is for a house maintenance business Aka Handyman business in the East Kimberly in The Desert. The Name of the business is - "RMS" I'd like RMS as the logo incorperating a Dingo Head in the design somehow. Open to ideas RMS A Cheeky Slogan Would be Great if you have any ideas.... WE Service or attend to people's homes in the most remote parts of Western Australia. Not too many people visit the placs we do. HIGHIGHTER GREEN BLACK WHITE AND Dingo Orangeor Red was what I waas thinking for colours but again open to ideas. Also open to Kangeroo Head a...
I am looking for someone with the experience and knowledge to measure associations and ideally find predictive relationships between three specific dependent variables and 130 other variables. I want the level of significance for the tests to be 0.01. The successful freelancer will provide insights that are reliable and statistically significant in order to maximize the value of t...for someone with the experience and knowledge to measure associations and ideally find predictive relationships between three specific dependent variables and 130 other variables. I want the level of significance for the tests to be 0.01. The successful freelancer will provide insights that are reliable and statistically significant in order to maximize the value of the data. The data are in SPSS .sav fi...
I am looking for a skilled freelancer to design a current limiter for a specific electronic component, namely a resistor. The purpose of this design is to protect the resistor from excessive current flow. I have a power board and it is working at 180v peak to peak voltage 18khz sine wave and 40 ma RMS. The issue I have the current is not steady I want a circuit design that ensures the current not exceed 20ma rms. Requirements: - The current limiter should have a peak to peak voltage of 200v and a current limit of 20mah at a frequency of 18khz. - The design should be suitable for an in-home working environment. Ideal Skills and Experience: - Strong knowledge and experience in electronic circuit design. - Familiarity with current limiting techniques and components. - Abil...
I am looking for a freelancer who can develop a Square Wave to Sine Wave (Power) Converter for my project. Input Voltage: 120V (rms) Square wave Frequency: 500 Hz Output Voltage: Same as Input Load applied at Output: 1.5 Amp Skills and Experience: - Experience in designing and developing power converters. - Proficiency in working with square wave to sine wave conversion. - Knowledge of frequency range specifications and voltage regulation. - Familiarity with power electronics and circuit design. - Ability to ensure reliability and efficiency in the converter design. If you have the required skills and experience, please submit your proposal for this project.
I am looking for a skilled audio editor to work on multiple voice recordings for an audio book. I have recorded them and edited them in garage band, however they failed the Amazon ACX upload due to RMS range not being in compliance. The "RMS range" must be between -23db and -18db. I need some help editing that. It needs to be uploaded into Amazon (ACX) as .mp3 format. Total record time is ~3 hours over 12 chapters and 1 preview file. If you are experienced in audio editing, I would greatly appreciate your help to make these voice recordings perfect! NOTE: This is a Christian-based marriage book, FYI. See example attached. I can of course use Dropbox (Google drive, etc.) to share either the .mp3 or Garage Band files.
Build code to Read 4 Analog Signals 4-20ma in a ESP32. We have made a board thats basicly has: ESP32 WROOM ADS1115 over i2c 4 Current to Voltage converters 4-20mA to 0-3V We would like to read the values from the probes. Actualy we've got already made code for reading and readings can be made. We apply already have a Int[] for multiples readings, made an average of squared values, Calculate the RMS value and Apply a rolling average. Althought the results still fluctuate a lot. Experience is needed. Full code can be provided.
Looking for an HTML/CSS/JavaScript calendar view-based form based on the code to b...visitors to easily select check-out (CIM, CID, CIY values) and check-in dates (COM, COD, COY values), as well as # of adults (AD), children (CH), and rooms (RMS) as well as Promotional Code (PC) and submit form. The structure of the calendar and color scheme should be similar to the photo references to be provided. The widget should be mobile-optimized and show calendar views on mobile devices as well. FORM VALUES: CID = CheckInDay ( 1…. 31) CIM = CheckInMonth (1 …. 12) CIY = CheckInyear (2023 . . .) COD = CheckOutDay ( 1…. 31) COM = CheckOutMonth (1 …. 12) COY = CheckOutYear (2023 . . .) AD = Adults ( 1 … 10) CH = Children ( 1 … 10) RMS = Rooms ( ...
Retail Marketing Solutions LLC “RMS”, is a "Start Up" International Technology | Marketing | Recruitment Agency throughout North and South America, Europe, and Australia. ----------------------------------------------------------------------------------- Hiring - Director of Strategy Development Consultation “Remote Independent Contractor”. • High 6 to 7 Figure Position • Highly Experienced with Digital Agency Sales (Digital & Programmatic). • Consult | Mentor | Grow | Manage an Experienced Consulting Team. • Enroll Clients to Purchase the below Services: 1.) Web & eCommerce 2.) Branding 3.) Packaging 4.) Marketing 5.) Content Writing 6.) Software Technology 7.) Talent Recruitment 8.) Maintenance & Management Plans ...
Project cost - $60 is USD or cad? Project scope - logo design, with symbol/icon, 4 layouts (3 are editable), with allowance for revisions until it meets our expectations
Sinewave Inverter Project - Lighting Equipment - Power Rating: 250VA - Input : 24VDC nominal [Can be anything between battery down 16V, battery overcharged 30V] (2) Output:- (i) Voltage = 110V RMS (ii) Current = 2 Amp (ii) Freq = 500 Hz (iii) Pure Sine Wave; THD 5% (iv) Power Load Coefficient (Capacitive) = 0.6 pf (Lead), minimum - Devices connected: Lighting Equipment I am looking for a freelancer who can develop a sinewave inverter for my lighting equipment. The inverter should have a power rating of 250VA. I have specific requirements for the input and output voltages, which will be discussed further. The inverter should be able to efficiently power the lighting equipment without any disruptions. Skills and Experience: - Experience in designing and develop...
Interface to sync database between RMS (REST API) boom gate database and Evolution software.
...data acquisition and integration within the dashboard. Additionally, I will require your MS Azure account login credentials to establish the necessary connections and configurations. Furthermore, in order to ensure seamless integration and setup of the required settings in the RUT955 device, I kindly request remote access to its WEBUI. This can be achieved through the utilization of either the RMS or the Zero Tier VPN. Rest assured, we will document the step-by-step process, including the configuration of MODBUS parameters, integration with MS Azure, and the creation of the dashboard itself. This documentation will serve as a comprehensive guide, enabling you to understand and modify the MODBUS parameters or adjust the displayed parameters on the dashboard whenever necessary. ...
I am looking for a freelancer to set up my python+celery+redis+mongodb infrastructure. I already have existing servers that can be used for the setup. The objective to merge candidate application data from three data sources - linkedin jobs, naukri and naukri rms. Each job will have a unique job_id and all the applicants from each data source will be tagged to one unique job_id. 1- A service will capture the data from each data source and upsert into each collection. eg. linkedin_jobs, naukri, naukri_rms. Since this service can run any number of times, the operation will always be upsert so that duplicates are removed 2. Stage 2- Upon completion of the upsert, there will be a collection called merged_data that will merge data from all three collections for a given job_id. This ...
I am looking for a skilled Python developer to build a database update system using RabbitMQ and MongoDB. The purpose of the system is to update our database on demand to ensure that it is always up to date. The objective to merge candidate application data from three data sources - linkedin jobs, naukri and naukri rms. Each job will have a unique job_id and all the applicants from each data source will be tagged to one unique job_id. 1- A service will capture the data from each data source and upsert into each collection. eg. linkedin_jobs, naukri, naukri_rms. Since this service can run any number of times, the operation will always be upsert so that duplicates are removed 2. Stage 2- Upon completion of the upsert, there will be a collection called merged_data that will merge
I am looking to hire a web design and development specialist to create a customized Repair Management system website. I have a specific design in mind and I'm in the process of purchasing a domain name and hosting for the website. I need someone with expertise in web development who can ensure optimal functionality and user experience. The individual must have experience working with RMS websites as well as website design and other web technologies. The website must be visually appealing, secure, and easy to navigate. The successful applicant should have an excellent attention to detail, be able to adhere to deadlines, and possess excellent communication skills.
National Records Management System A records management system (RMS) is a software application designed to manage and track records throughout their lifecycle, from creation to disposal. An RMS typically provides tools for storing, organizing, searching, and retrieving records, as well as managing access and security. The system is designed to ensure that records are stored securely and can be easily accessed and retrieved as needed, while also complying with legal and regulatory requirements. As a national records and security database for a country like ours , an RMS could play an essential role in managing a wide range of records related to national security, law enforcement, and other critical government functions. The system could be used to manage records related...
I am looking for a freelance developer to create a program to adjust MP3 audio files to meet specific requirements. The program should adjust the audio files to an RMS between -23dB and -18dB RMS and the kbps to 192. It must do this without mangling the sound. The program can be either a standalone program or a plugin, and should be compatible with Windows operating systems.
Je recherche de l'aide pour créer une plateforme en ligne appelée SAV Master. La plateforme devrait comprendre des fonctionnalités basiques de gestion des stocks, de suivi des ventes et de gestion de la relation client. Je préférerais que cette plateforme soit basée sur le web et propose un niveau basique de personnalisation de l'interface utilisateur. Je suis à la recherche de quelqu'un qui puisse fournir une solution complète répondant à mes besoins spécifiques
I need a single PCB that accepts a digital signal, TosLink or digital Coax, and can simultaneously transmit that signal over a selectable FM frequency for about 150 feet and send an analog signal out at about a maximum of 5 watts RMS. Preferrable that power supply would accept 110VAC. The design is only the first step. Ultimately, I need the product produced for installation in a product our company makes.
Make a Daily Finance Tracker Template with a Dashboard View on Notion wherein there is a Net Income calculation based on Two Tables, namely – 1. Income - The Income Table has Five Properties, namely - Date (in the format of Date on a Daily Basis), Income Type - which has "Select" property with nine options - F, TP, CB, SW, DI, RES, OTH, RMS, PTY. The “Locations” is another property in the Income Table which also has “Select” property with six options – H, SPS, SSPS, S, HDP, OTH. The Income Table further has an “Amount” property which has the Amount in the form of Numbers received from different locations. The last property would be “Remarks” in which one can add remarks related to the received Income. 2. Expense...
I need help creating a logo for my coaching business. My company name is RMS Performance, I work a lot with athletes who want to become stronger, faster and better at their sport, and people who want to become fitter in general. I was thinking red for a colour but I am not married to that idea. I will leave some photos of logos I like as an base idea. But I feel like they all need something
CFD Post-Processing Script in C I have a script written in C that reads in a set of files, calculates the average for a specific variable (var1) from the files, and then writes it into an output file. I'm trying to modify the script to calculate the root mean square (rms) of a variable (e.g. pressure). The variables needed to calculate the rms are found in the files being read in. I need to calculate pressure first before I calculate the rms of it using the elements (e.g. density, momentum, etc.) of the array whose values are stored within each file that is read in. Please let me know of any questions you may have or any additional detail I can provide. I've attached the script to this post including a single sample file which is read in with this script. The...
I would like an app created for windows that allows me to select an input folder of audio files, output folder, and it will automatically adjust the audio files to an RMS between within the specific volume range of -23dB and -18dB RMS, and the kbps to 192. The GUI can be very basic, just functional. I would like to be able to set the RMS and KBPS range, with the default options being the ones above. It has to do this elegantly - it can't butcher the audio.
I am under a tight deadline and need three regression models with three DV using one IV, and socioeconomic CVs. I have a .sav and .csv file ready that may need some cleaning/organizing. Any interpretation would be appreciated and compensated.
As a busy entrepreneur, I understand how important it is to have quality audiobooks available to my audience. That's why I'm here to find an experienced freelancer who can help me edit an audiobook that meets ACX standards. The material that needs to be edited is in chapters as audio files. I do not require narration services, I only need help with the editing process: RMS, Peak, Noise Floor etc top of that, I need the audio edited to clean up any background noise or irregularities. If you think you have what it takes to complete this project, please don't hesitate to apply!
I am looking for how a specific calculation was achieved using IEC60909 short circuit analysis for peak and rms current values for a project(image attached). The required details and schematics for the calculations would be provided.
I want to transfer channel sounder between two l'USRP N210 with RFX2400 (supportant 2,3 ~ 2,9 GHz). Using GNU Radio and then i want to analyze and study the connectivity in calculate the RMS delay and doppler frequency
Hi Dezine Geek, I accidentally deleted the project after releasing you payment and leaving a review. Now I cant message you back. Please help
Hi Dezine Geek, I accidentally deleted the project after releasing you payment and leaving a review. Now I cant message you back. Please help
We are trying to get two general PowerPoints built (possibly more) for our publications. The PowerPoints need to be editable so that we can make quick fixes and adjustments as needed. I've attached two PowerPoints that we have (RMS Generic and NS Home Generic) that have touches of tailoring from the past. We'd like these updated to be more in line with the Peter Christian Outfitters PDF I've attached. We can give more specific instructions and images / graphics when needed. Thank you!
