Rotor music video jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    333 rotor music video jobs found, pricing in USD

    We want to hire someone who can dynamically balance rotor in Solidworks and give us the mass and location for each plane from Solidworks study.

    $399 (Avg Bid)
    $399 Avg Bid
    26 bids

    I need a helicopter rotor spinning effect on a model and a deceleration script so an object gradually slows down

    $43 (Avg Bid)
    $43 Avg Bid
    4 bids

    I need help to calculate lift and other stress forces for a coaxial rotor setup for a small scale RC helicopter design. Will share more info when engaged.

    $122 (Avg Bid)
    $122 Avg Bid
    24 bids
    Trophy icon Logo Design Ended

    a quick contest to design our companies logo for website and printing. 2 Tone Vintage , a watch company. i attach one the design with logo as watch movement rotor and some chosen Font. However we are open and looking for better design of Logo and brand name, more 2D/3D effect, clean design

    $100 (Avg Bid)
    Guaranteed
    $100
    169 entries

    Hello I need someone ...Kalman filter and I have to do this to control the speed of induction motor. I need the simulink model, the entire system . the kalman filter is used to estimate mainly the rotor flux,I need to use the MPC to control thee velocity , the kalman filter is a secondary thing Kindly, check the attached file given here below, thanks

    $212 (Avg Bid)
    $212 Avg Bid
    16 bids

    Hello I need someone ...Kalman filter and I have to do this to control the speed of induction motor. I need the simulink model, the entire system . the kalman filter is used to estimate mainly the rotor flux,I need to use the MPC to control thee velocity , the kalman filter is a secondary thing Kindly, check the attached file given here below, thanks

    $96 (Avg Bid)
    $96 Avg Bid
    12 bids

    Hello I need someone ...Kalman filter and I have to do this to control the speed of induction motor. I need the simulink model, the entire system . the kalman filter is used to estimate mainly the rotor flux,I need to use the MPC to control thee velocity , the kalman filter is a secondary thing Kindly, check the attached file given here below, thanks

    $29 (Avg Bid)
    $29 Avg Bid
    4 bids

    Test the rotor for thrust at 5000 rpm, suggest optimization changes. Its a simple job for expert engineers. No time wasters please . It a seed project and lot more given to successful bidders. My final offer price is 20$ and deadline is 24 hrs. Expert can do within couple of [login to view URL] File is attached here.

    $19 (Avg Bid)
    $19 Avg Bid
    8 bids

    ...drone Pilot for a company call "Flynoceros". Flynoceros is drone frame company. They build race frames and freestyle frames. We are attending the BIGGEST fpv event of the year "Rotor Riot: Rampage" I would like to have shirt designed for the event incorporating flynoceros and RR: Rampage. Things i would like to see in the design are: Drones in action: crashing

    $65 (Avg Bid)
    $65 Avg Bid
    7 bids
    Trophy icon Build a logo. Ended

    Build a logo. I have a an idea but needs to be refined. Please see the attachment. I want it appear like rotor model. But bring your imagination. If you have some thing in your mind please post. Play with fonts, colors, size, shape, make it three dimensional, bring everything you got. Thanks.

    $50 (Avg Bid)
    Guaranteed
    $50
    115 entries

    ...and safety inspection - $259 5. Air conditioning re-gas for only $99 when you book your vehicle in for a service. 6. Free brake fluid change with every brake pad and rotor change Please visit our website for more details on the services we offer at mitchellautomotive.com.au...

    $249 (Avg Bid)
    Featured Guaranteed
    $249
    37 entries

    ...turquoise include the text: Ameba Loca ** if you've already submitted using Loco dont worry, If you are the winner I'll ask you to update it to Loca include the essence of a 4 rotor drone i.e. it can be a graphic is a drone or a that represents a drone File formats required: ai or eps, png, jpeg, I look forward to seeing the some great designs!

    $40 (Avg Bid)
    Guaranteed
    $40
    162 entries

    I have two models of generators built in OctaveFemm but now need to calculate and plot results such as cogging torque, 3 phase currents, EMF Vs rotor position followed by getting my rated torque.

    $193 (Avg Bid)
    $193 Avg Bid
    16 bids

    ...company has many years of experience in development and production in the field of efi fuel pump, has a modern dust-free workshop,Imported Japan automatic production line for the rotor at the same time, companies for the first time in 2006by IATF company TS16949 quality system by the United StatesCertification. At the same time, productsthrough the national

    $433 (Avg Bid)
    $433 Avg Bid
    38 bids
    Trophy icon Video Creation Ended

    I'd like to create a video that is a collection of clips from existing videos. Here are the clips i'd like to combine: "HBM100t - steam turbine LP rotor" - 1:46-1:52 -> [login to view URL] "Heavy Haulers in the Oil Sands - BTITW" - 0:56 - 1:01 -> [login to view URL] "Marine Diesel Engine (K98MC)"

    $76 (Avg Bid)
    Guaranteed
    $76
    24 entries

    I need a logo designed. Hi, I'm looking for a company logo the name of the company is called rotor 360 and the company utilizes UAV's for inspection purposes mainly wind turbines.I do you have a few ideas however the company's logo is wanting to be professional design and the colouring of the logo is preferred to be white or black with a flash of red

    $66 (Avg Bid)
    $66 Avg Bid
    73 bids

    [login to view URL] rotor wing and tail stabilator can rotate; [login to view URL] helicopter can take off at a certain height, And back to original position; [login to view URL] final model would be like the attachment demo's effect.

    $66 (Avg Bid)
    $66 Avg Bid
    6 bids

    ...complete drone frame will be suggested. 
An additional task will be to make a list of components (BOM) and shop drawings for the beforehand mentioned custom engineered multi-rotor platform. You will be working in close cooperation with a drone expert that will guide through all necessary information regarding the drone construction itself. It is a plus

    $35 / hr (Avg Bid)
    $35 / hr Avg Bid
    11 bids

    Amazon auto parts fitments Help solve the issue, Looking for an efficient way to...https://www.amazon.com/Bosch-50011247-QuietCast-Premium-Brake/dp/B004AGC2CO/ref=sr_1_1?s=automotive&ie=UTF8&qid=1527293275&sr=1-1&keywords=Bosch+50011247+QuietCast+Premium+Disc+Brake+Rotor%2C+Rear What cars will fit this auto part, need to know all Makes/Models/Years

    $165 (Avg Bid)
    $165 Avg Bid
    7 bids

    Need to design a simple 6 rotor drone, something as shown in the image but you can improvise and create your own design as well. Need a package (can just be shown as a cube) attached to the drone at the base of the drone and should be shown that it is fitted with a fuel cell which powers the drone. Looking for a very simple design and nothing complicated

    $141 (Avg Bid)
    $141 Avg Bid
    24 bids

    Mechanical Final Year project on Water Rotor.

    $15 / hr (Avg Bid)
    $15 / hr Avg Bid
    32 bids

    Hi I need help with a simple CFD simulation, using Ansys CFX. I'm trying to simulate a single rotor attached to magnets, enclosed. I'm struggling with the meshing. Please if you can help message me.

    $28 (Avg Bid)
    $28 Avg Bid
    1 bids

    Hello, I need to make a tests n MagNet Infolytica program. I have STEP file with ready electric motor. It has coils, stator and rotor. Coil number of turns is - 30. At final i want to have working MagNet file, where i can make test by my self.

    $26 (Avg Bid)
    $26 Avg Bid
    5 bids

    I need som...to design motor for maximum torque within the given requirements, and manufacturing method. The enginner will be responsible for delivering stator lamination cut files, and rotor design and BOM, as well as simulation results. If the enginneer has proir experience with lamination fabrication houses, and winding services, that is a plus.

    $4081 (Avg Bid)
    $4081 Avg Bid
    10 bids

    looking to have someone good with Solidworks, EmWorks (magentic simulation software), and a backround in mechanical engineering render a 3D model of a rotor i have sketches of using EMWORKS to design rotor so that we can test the products function before having manufacturer produce it.

    $170 (Avg Bid)
    $170 Avg Bid
    27 bids

    make programme for a automatic paper cutting machine. cut from a roll into sheets. 1 stepper motor for the feeding rotor 1 stepper motor for the cutting mechanism on a linear rail 2 mechanical end switches on the linear rail (when stepper motor moves wrong or loose steps -> also used as reference point) 1 sensor to know when the roll is empty

    $206 (Avg Bid)
    $206 Avg Bid
    25 bids

    Im looking to have someone design me essentially a rotor for an altenrator that utilizes fixed magents instead of pushing a current through copper wiring to create a magentic field. Both the housing and the rotors fixed magnets will have to be assembled so that the repulsion or attraction (whichever is more efficient) between the magnetic fields creates

    $518 (Avg Bid)
    $518 Avg Bid
    30 bids

    Hello - I am investigating quadcopters and I...MATLAB. I need a MATLAB program writing (not SIMULINK) just MATLAB so I can simulate Quadcopter flight with a couple of inut parameters and I'll need to be able to config the rotor speeds. and I just would like a couple of graphs so I can look at the and then write my own based upon what has been written.

    $224 (Avg Bid)
    $224 Avg Bid
    9 bids

    Implement a working model of a DFIG in Matlab/Simulink. Use the model to simulate the performance of a DFIG during normal a...contrast and compare performance of the DFIG. Investigate control techniques to improve performance of a DFIG during conditions of grid problems including measures to control the rotor-side and grid-side converters in the DFIG

    $59 (Avg Bid)
    $59 Avg Bid
    11 bids

    Please Sign Up or Login to see details.

    Featured Sealed Top Contest NDA

    Implement a working model of a DFIG in Matlab/Simulink. Use the model to simulate the performance of a DF...contrast and compare performance of the DFIG. Investigate control techniques to improve performance of a DFIG during conditions of grid problems including measures to control the rotor-side and grid-side converters in the DFIG model: attached

    $501 (Avg Bid)
    $501 Avg Bid
    16 bids

    Implement a working model of a DFIG in Matlab/Simulink. Use the model to simulate the performance of a DFIG during normal a...contrast and compare performance of the DFIG. Investigate control techniques to improve performance of a DFIG during conditions of grid problems including measures to control the rotor-side and grid-side converters in the DFIG

    $122 (Avg Bid)
    $122 Avg Bid
    1 bids

    I have requirement of Simulation modeling of doubly fed induction generator with grid side and rotor side controller.

    $326 (Avg Bid)
    $326 Avg Bid
    16 bids

    Hi! My name is Jacob and I'm looking to startup a drone business. I want to do photography as well as video with it but more on the video side of things. Eventually I would like to get into the industrial side of it as well. Having said that the name and logo should appeal to all disciplines. I've actually came up with a few ideas for the name/logo

    $83 (Avg Bid)
    $83 Avg Bid
    87 bids

    Hi, how much time would it take to model the electro-magnetics on a motor design. Can you model an AC induction motor? I could provide the DXF file for rotor and stator. Would you be able to suggest improments to the pole shape and back iron requirements?

    $15 (Avg Bid)
    $15 Avg Bid
    1 bids

    ...(27.5 MVA), Turkey Working on Large Generator Components:- 3-D modeling, Assembly and Design for Manufacturingof----- • Shaft NDE (Non-Drive End) (Raw and Machined). • Rotor Leads (Complete). • Cooling water piping- Generator. • Cooling water piping- LCB Software Used:- NX 10, ASAP Duration: 1-Sep-2017 to Present.  Project Location: - Andritz

    $13889 (Avg Bid)
    $13889 Avg Bid
    6 bids

    ...electromagnetic torque, the rotor speed and the load angle during the transient in both cases, on appropriate time scales. Comment on these results. ​.​d)  Simulate the response of the generator to a three-phase short circuit at its terminals. In particular, show the three stator phase currents, the load angle and the rotor speed during the transient

    $50 (Avg Bid)
    $50 Avg Bid
    1 bids

    ...goes through. The track of the ball is black, and when the ball goes through this pixels they are going to change their colour to 70% or less grey. The same happens in the rotor, where one can measure the change of the pixel to black or red. I say pixels as the ball spins fast, and most times between one frame and the next It is going to skip the

    $48 (Avg Bid)
    $48 Avg Bid
    2 bids

    I require a drawing to submit to manufacturers for a quote. It is a vertical shaft with a rotating spindle.

    $26 (Avg Bid)
    $26 Avg Bid
    18 bids

    Rotor and stator drawing please specify drawing making cost

    $66 (Avg Bid)
    $66 Avg Bid
    21 bids

    This is part of a project that has an international patent application pending. There is a video which demonstrates the key functionality. Please note this was created in C++. [login to view URL] Please begin your response with "Dove" to indicate

    $2931 (Avg Bid)
    $2931 Avg Bid
    20 bids

    Redesign Lundell claw - pole rotor with additional pole shoes, based on present 12 pole design. Must work in existing 72 slot stator.

    $166 (Avg Bid)
    $166 Avg Bid
    1 bids

    This project is for the calculations of lift fans for UAV (drones). I need someone that can research and specify the rotor type, diameter, speed and disc loading for a multi-copter with 4 lift fans. This would be done iteratively on 4 sizes of lift fans. (in order to assure you're read this post...please let me know in your reply the name of one

    $141 (Avg Bid)
    $141 Avg Bid
    9 bids

    ...twenty existing commercial drones with single/multi-rotor configurations. (quad-copters and similar). I need a list of: 1. the power plants, 1a. how many of each, 1b. mass of motor, 1c. max continuous power rating 1d. motor speed at continuous power 2. Rotor size (diameter) 2a. lift per rotor 2b. number of rotors 3. Range with max payload

    $152 (Avg Bid)
    $152 Avg Bid
    15 bids

    Hi We need a program (in C) to control our brushless motor from an SAMD21 micro controller (Arduino M0) . The motor has hall sensors to determent the rotor position and is controlled through 3-half bridge (BTS7960). Other (simpler) solutions to control our motor is welcomed. We want to establish a relationship to an embedded programmer that

    $132 (Avg Bid)
    $132 Avg Bid
    12 bids

    CAMPAIGN PUZZLE BEGINS INCOMPLETE AND IS TIMED/Animated TO GRADUALLY BECOME COMPLETE BY END OF 30 second SPOT WITH PUZZLE PIECES FLYING IN TO COMPLETE A PRODUCT PICTURE ...BEGINS INCOMPLETE AND IS TIMED/Animated TO GRADUALLY BECOME COMPLETE BY END OF 30 second SPOT WITH PUZZLE PIECES FLYING IN TO COMPLETE A PRODUCT PICTURE OF A BRAKE CALIPER AND ROTOR

    $471 (Avg Bid)
    Urgent
    $471 Avg Bid
    25 bids

    ...(called rotor). On the left circle, the rotor will rotate by 1degree at every frame. On the right circle, the rotor will move every 60 frames by 60 degrees. The result is that the left circle will show smooth rotation. The right circle will show jumpy rotation. Use the uploaded circles ([login to view URL]) and the rotor.png. [login to view URL] shows the rotor in t...

    $31 (Avg Bid)
    $31 Avg Bid
    5 bids

    I need a logo designed. I need a logo designed. Hello my name is Juan Cambron looking to grow my business, I am hig...is GO 2 Auto, we work on import and domestics vehicles this are services we provide Emission system diagnostic A/C service Engine & transmission work Tune-up Brake & Rotor service Suspension & Steering work Module programming

    $30 (Avg Bid)
    $30 Avg Bid
    8 bids

    I need a logo designed. Hello my name is Juan Cambron looking to grow my business, I am highly int...is GO 2 Auto, we work on import and domestics vehicles this are services we provide Emission system diagnostic A/C service Engine & transmission work Tune-up Brake & Rotor service Suspension & Steering work Module programming Thank you

    $315 (Avg Bid)
    $315 Avg Bid
    36 bids

    ...from main storage tank or manifolds, medical air, surgical air, medical vacuum system and Nitrous oxide for anesthesia.  Design of Automatic Irrigation system and sprinkler, rotor, bubbler and dripper for watering of tress and lawn.  Proficient or familiar with a various design software’s of HVAC, Fire Fighting system, Plumbing & Medical gasses systems:

    $174 (Avg Bid)
    Local
    $174 Avg Bid
    6 bids