Rtos dimmer jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    514 rtos dimmer jobs found, pricing in USD

    ...manuscripts for the operation. Skills Required: -Experienced in architecture design, software life cycle in embedded applications. -Experienced in Microcontroller Architecture, RTOS -System level architecture, design and Integration skills -OS level porting. -Understanding of IoT technology. -Exposure to Sensors, would be an added advantage. Experience-

    $826 (Avg Bid)
    $826 Avg Bid
    9 bids

    Hi! I am doing a project where I want a statue lit up with Christmas lights when Node-Red is activated. My application will send a JSON HTTPS Request to IB...Christmas lights when Node-Red is activated. My application will send a JSON HTTPS Request to IBM Cloud and then I'd like the program to trigger the lights on, preferably with a dimmer effect.

    $53 / hr (Avg Bid)
    $53 / hr Avg Bid
    8 bids

    I have a code which is using PIC controller and I want to taje the design to Open CPU using SIMCOM or Qualcom module which support Open CPU modem. I am looking for someone who has done similar work before and can undertake the same. The project is for a GPS tracker. We can undertake one project and if its succesful undertake the second one after that.

    $384 (Avg Bid)
    $384 Avg Bid
    4 bids

    Hi, we are trying to harness the power of open source automation platform combined with MQTT, N...we are trying to harness the power of open source automation platform combined with MQTT, NODEMCU, ARDUINO etc to start with looking for some one who can design or hack a dimmer to work with MQTT in a local network without cloud / internet dependencies.

    $121 (Avg Bid)
    $121 Avg Bid
    15 bids

    A developer is required to create software for the device on the Stm32f4 processor and RTOS. All hardware is ready. Requires firmware development and maintenance changes. Now I have a base code on the library of emWin.

    $1035 (Avg Bid)
    $1035 Avg Bid
    25 bids

    for imad , i have to add at least 30 carac

    $59 (Avg Bid)
    $59 Avg Bid
    9 bids

    must have experience in esp8266 and programming it

    $49 (Avg Bid)
    $49 Avg Bid
    8 bids

    Needing someone with experience in or access to RX850V4 - an RTOS for the V850 family

    $371 (Avg Bid)
    $371 Avg Bid
    3 bids

    We are creating a light (led) which intensity fades in and fades out when a person approach measured with a distance sensor IR or ultrasonic. The final product (sensor and controller) needs to be small, super steady and it can be a prototype.

    $168 (Avg Bid)
    $168 Avg Bid
    46 bids

    Hi navernjaka, I noticed your profile and am curious if you can design a wireless terminal in kicad. It must be kicad so that we can collaborat...wifi module, lithium battery charger, power supply. Most everything is done. Just need to integrate LTE module, audio codec IC. Need to also write firmware. Can you write a RTOS to manage SMS, phone call?

    $10 (Avg Bid)
    $10 Avg Bid
    1 bids

    ...power optimization through programming(sleep mode, LP Mode) for battery operated applications. 2. Quectel M66 OCPU Programmer A.) Knowledge of Operating System programming(Eg. RTOS, FreeRTOS, ChibiOS etc) B.) Familiar with Quectel OpenCPU SDK. C.) Ability to make firmware for Flash RAM(32Mb) to store data during runtime and retrieve whenever required.

    $391 (Avg Bid)
    $391 Avg Bid
    17 bids

    Need to port FreeRTOS for RH850/P1H-C Microcontroller. need some basic changes which will make the RTOS compatible with RH850. you do not need to write any drivers. you just need to make some changes specific to the microcontroller. let me know if any one is interested to work on this.

    $14 / hr (Avg Bid)
    $14 / hr Avg Bid
    9 bids

    ...DAC, PWM Should have good understanding about electronics hardware. Duration of the project: 45 Days to 60 Days Deliverable : Complete BSP + Sample App RTOS Integration (Free RTOS) IDE & Compiler All tool chain support Joint Validation & onsite support (if required) We are planning to develop application software from our side.

    $1453 (Avg Bid)
    $1453 Avg Bid
    26 bids

    We are developing 32 bit controller based ECU, looking for a soft engineer who can develop softwares basic software, free RTOS integration, drivers for SPI & CAN protocal.

    $974 (Avg Bid)
    $974 Avg Bid
    14 bids

    We are a small company that works with weather monitoring, we have a whole hardware development team, but we want to outs...with weather monitoring, we have a whole hardware development team, but we want to outsource some specific jobs like this one: Develop a driver for the sensor BMP280 in Zephyr RTOS for an ARM microcontroller from the family nRF52

    $271 (Avg Bid)
    $271 Avg Bid
    10 bids

    ...battery. Solar to charge battery. Current regulations for LED led supply 3.3 v 5 v supply output for mobile charging. Power input accept either solar or 12v 1 amp charger. Dimmer based on PWM. Input for led selection dual select, knob based and select based on input from Arduino pins, pin will give high input of 5 v for LED on/off. Four input from

    $17 (Avg Bid)
    $17 Avg Bid
    21 bids

    Develop a Fan and Light Dimmer Module using PIC 18F2550 or any other PIC Micro, controller. Show a working prototype with any of the PIC microcontroller and level of dimming should be 20, 40, 60, 80, 100 %. Default Code and Schematic have been attached.

    $101 (Avg Bid)
    $101 Avg Bid
    26 bids

    This is about creating a demo which connects ESP32 micro-con...micro-controller will connect to the bluetooth speaker and stream audio. The audio can be streamed via wifi or from audio stored on the ESP32. The source code must utilise Free RTOS. Successful freelancer will get US$300 for their source-code after successful code review and demonstration.

    $159 (Avg Bid)
    $159 Avg Bid
    5 bids

    I have a old pic project that i want to edit. This project has 4 LEDs for FAN and LIGHT status, but instead i would like to use 4 or 8 of these LEDs status as inputs for setting 10% to 100%. There are 2 inputs for UP and DOWN and 1 input for selecting FAN or LIGHT mode. This code is already working on BREADBOARD and just need these extra 4 or 8 inputs to set fast mode percentage of brightness. ...

    $26 (Avg Bid)
    $26 Avg Bid
    20 bids

    Loqed deve...notifications from our backend. The bridge will then retrieve the information using either GRPC (or JSON). JOB REQUIREMENTS - Excellent understanding of C / C++ - Experience with an RTOS. You know how to handle a JTAG debugger. - Experience with Bluetooth Smart - Willing to travel at least once to our office in Amsterdam, The Netherlands

    $34 / hr (Avg Bid)
    $34 / hr Avg Bid
    27 bids

    Hi Sagar D., I noticed your profile and would like to offer you my project. We can discuss any details over chat. The host CPU is a STM32F0 running FREE RTOS, using Eclipse IDE (GCC)

    $579 (Avg Bid)
    $579 Avg Bid
    1 bids

    I am looking for a person to get the firmware for my PCB done, here is what I need: RTOS Can Bus USB Device (Vcom) Wake up and sleep on interruption Start your message with the text Truck Project PCB so I know you read the whole description 2 x UART comm 6 x GPIO control 2 x GPIO read 5 ADC read 2 x User button read Control 0.96" OLED I2C LCD (write

    $140 (Avg Bid)
    $140 Avg Bid
    10 bids

    Hello, I am trying to use my existing C ++ code for Microchip and transfer it to my existing Arduino code for the 110VAC DIMMER LIGHT and FAN. I already have the MICROCHIP DIMMER working but need to control by VOICE (alexa or google) maybe we can use [login to view URL] for more info please let me know!

    $249 (Avg Bid)
    $249 Avg Bid
    23 bids

    Hi. You are looking l...discuss the details after our initial contact. The module will measure multiple analog signals and publish the data over Bluetooth to our app. We prefer working with free RTOS. Do you prefer us to do the requirements down to components or do you have mcus and Bluetooth chipset that you prefer to use? Best regards Fredrik

    $5 / hr (Avg Bid)
    $5 / hr Avg Bid
    1 bids

    I have 5years of work experience in embedded domain. Below are my key skills 1) Embedded C,C++ 2) Linux and RTOS 3) GUI DESIGN 4) Architecture Designing 5) UML Diagrams

    $9 - $9
    $9 - $9
    0 bids
    $1940 Avg Bid
    7 bids

    1. QCA7500 SoC 2. No USB, HDMI, Ethernet, Wireless 3. HomePlug Powerline communications only 4. Serial / latch AD1862 DAC 5. i2c Auth Chip 6. 44.1 khz sampling freq for Audio 7. Serial / Latch ALSA hardware driver needed Note: I have C code ready for porting.

    $583 (Avg Bid)
    $583 Avg Bid
    2 bids

    I want to build STM8S103 8bit Microcontroller based digital fan dimmer or Regulator I have complete hardware setup which only needs software to run the project. Require C code which should have the following functions 1- single digit 7 segment Display increment or decrement using up and down button 2- for the controlling of 220v AC Fan speed IC trigger

    $20 / hr (Avg Bid)
    $20 / hr Avg Bid
    25 bids

    Looking for an embedded SW engineer who can make design and modelling of an application at abstract level. I looking to...Expert in UML design - Expert in embedded PC interface protocols such as I2C, SPI, CAN, and USB. - experience how to make a software work across multiple platforms such as Linux, RTOS (e.g. RTX/uCOS) and bare metal microcontrollers

    $201 (Avg Bid)
    $201 Avg Bid
    9 bids

    ...pulse, SpO2 and more. WiFi and Ble enabled, battery powered and should have capacitive touch display with a decent UI. You will need to design it around Arm Cortex processor. A RTOS based firmware is preferred. You will need to provide us with detailed schematic, PCB design layout, BOM of device, firmware and its source code, detailed instruction to flash

    $2008 (Avg Bid)
    $2008 Avg Bid
    12 bids
    Trophy icon Design a Flyer Ended

    ...Content - Quay Electrical REC:26063 2018 SPECIALS $60 LED Downlights Supplied and Installed Savings of over $50 per year per light swapping from Halogen to LED! Free dimmer with every 15 down lights installed 0433 367 776 liam@[login to view URL] [login to view URL] Call today to find out more ------------------ Should

    $37 (Avg Bid)
    Guaranteed
    $37
    90 entries

    ...looking for someone to review a design to identify problems and determine what modifications we need to make to the circuit to make it work correctly. The circuit is a TRIAC dimmer design and it appears to not be switching correction. We are looking for experienced electronics specialists only. The reason we have this design is because of choosing the

    $52 / hr (Avg Bid)
    $52 / hr Avg Bid
    9 bids
    $496 Avg Bid
    2 bids

    Please see detailed overview and deliverable attached

    $228 (Avg Bid)
    $228 Avg Bid
    8 bids

    Interfacing sensor Program require experience in RTOS(FreeRTOS).

    $29 (Avg Bid)
    $29 Avg Bid
    2 bids

    Hi, I'm looking for a freelancer who has experience with various technologies including: - Embedded Linux, RTOS, and bare metal (no OS) - AWS IoT - IEEE 802.15.4 radios (foundational protocol of Zigbee and others) - Serial communications (SPI, I2C, UART, RS485, 1-Wire, CAN, Ethernet) - 8-bit resource-restrained microcontrollers - 32-bit

    $121 (Avg Bid)
    $121 Avg Bid
    11 bids

    Schematics & PCB Design (Altium preferred) for a 5A custom Arduino 2 channel Dimmer with NRF24L01 wireless interface that will meet all safety precautions in an as small as possible package. (max 5mmX5mm PCB) The schema will include : Atmega328p MCU 2 Channel 5A IGBT (no heatsink) 4 Buttons 4 LEDs 2 Current sensors (ACS712) SPI flash memory

    $184 (Avg Bid)
    $184 Avg Bid
    19 bids

    Schematics & PCB Design (Altium preferred) for a 5A custom Arduino 2 channel Dimmer with NRF24L01 wireless interface that will meet all safety precautions in an as small as possible package. (max 5mmX5mm PCB) The schema will include : Atmega328p MCU 2 Channel 5A IGBT (no heatsink) 4 Buttons 4 LEDs 2 Current sensors (ACS712) SPI flash memory

    $272 (Avg Bid)
    $272 Avg Bid
    15 bids

    ...230v to 5v Hilink power supply (or anything smaller) 3. the Switches should be made of triacs (and mos3041) 2 channel (no electromechanical relays to save space ) 4. one AC dimmer using triacs. I would be providing the firmware for the same I Only need the circuit. I already have a working circuit using NODEMCU and electromechanical relays this

    $107 (Avg Bid)
    $107 Avg Bid
    14 bids

    ...230v to 5v Hilink power supply (or anything smaller) 3. the Switches should be made of triacs (and mos3041) 2 channel (no electromechanical relays to save space ) 4. one AC dimmer using triacs. I would be providing the firmware for the same I Only need the circuit. I already have a working circuit using NODEMCU and electromechanical relays this

    $115 (Avg Bid)
    $115 Avg Bid
    11 bids

    ...Good knowledge, logical, analytical thinking - Have a system overview and product development mindset - Software language: C/C++, C# - Platform and operating system used: RTOS, Linux, Windows - Microcontroller: ARM core from STM, NXP or TI - Communication standards: I2C, CAN, RS485, UART, NFC, SPI - Experienced in develop embedded software for

    $1370 (Avg Bid)
    $1370 Avg Bid
    20 bids

    This is about creating a de...SIP call. In this case the ESP32 micro-controller will act both as a sip client and Bluetooth receiver. Successful freelancer will get US$300 for his source-code (made in Free RTOS) after demonstration. After successful code review the successful freelancer will also be made a preferred contractor of Alexys International.

    $266 (Avg Bid)
    $266 Avg Bid
    9 bids

    ...inputs and control of two pumps and fan already working. I made sure it compiles and runs with the following tool chain: XC32 1.42 or higher Harmony 2.04or higher Free RTOS and WIFI driver working Using MPLAB X IDE v4.0 or higher All currently available free for download from Microchip Our goal is simply to modify this firmware by adding a

    $2555 (Avg Bid)
    $2555 Avg Bid
    6 bids

    In order to do the project, you will need Altera's DE2-115 Board. Please contact me for more info. Prior work with MicroC/OS-II RTOS with the Nios II Processor is an asset.

    $134 (Avg Bid)
    $134 Avg Bid
    3 bids

    ...electronics will pass Safety and regional Certifications. Product involves: i) communication between multiple MCUs using I2C ii) Implementing Power Management methods provided by RTOS supplier iii) Ensure database has been setup correctly iv) communicating with PC via USB using standard APIs v) understanding of USB at all levels vi) implementing simple mixed-signal

    $1145 (Avg Bid)
    $1145 Avg Bid
    8 bids

    I need to connect Z wave dimmer 14294 to Openhab 2. The dimmer is working as a switch at the moment. I need the sitemaps, items, rules configuration or whatever else I need for the dimmer to work properly.

    $10 - $30
    $10 - $30
    0 bids

    Based on the Project Amazon RTOS for STM32L4, Need to take out the actual wify and add wifi functionality using ESP8266 . Doesn’t mater if use at+ commands via UART or SPI , but need the driver can be an extrcted layer to be used with other MCU Important amazon RTOS The Project is base don STM32L4 Discovery board, the final board is not the same

    $139 (Avg Bid)
    $139 Avg Bid
    5 bids
    Trophy icon Martywatt lighting logo Ended

    I build LED grow lights with simplicity in mind. They are fully passive cooling and have a dimmer with nothing else. The lights are upgradeable as the LED tech gets better and only use the best components I can find. They use Citizens CLU058 3618 COB LED and Meanwell drivers. I would like to use Meanwell colors or lettering (not copy but similar), but

    $250 (Avg Bid)
    Guaranteed
    $250
    80 entries

    ...Capacitive touch screen, Ethernet, SPI flash, ADCs, DACs and a 2G/3G modem and communicates with Amazon cloud. The support we need is to port Harmony framework (Along with Free RTOS) for this board and demonstrate drivers for all the peripherals so that we can build our application faster. The customized board is based on the Microchip development board

    $942 (Avg Bid)
    $942 Avg Bid
    6 bids

    based on STM32L4 dicovery Amazon AWS RTOS, need to configure via uar ( at commands ) or SPI a wifi module ESP8266 working.

    $244 (Avg Bid)
    $244 Avg Bid
    2 bids