Ryu controller jobs
Seeking an independent embedded hardware/firmware engineer to design, build, program, test and deliver one complete dual-channel low-voltage electrode controller and matching owned manufacturing files. This is original development from written functional requirements; no existing schematic, PCB or firmware. External nominal 12 V supply. Two electrode pairs operate simultaneously in shared water, with current/voltage limits, controlled polarity reversal, retained polarity state, manual timed dosing, simple buttons/selector and actual-current indication. No wireless, app, display or production batch. Engineer must procure and receive the prototype, program and debug it at their own or managed facility, obtain an agreed representative electrode test fixture, perform documented shared-w...
Step by step written help in chat to set up VirtualDJ with no controller. The crossfader will blend and fade songs properly, and the mix will play through the speaker and headphones at the same time. Support continues in chat until it works.
...actually blending tracks and I’d like your guidance inside VirtualDJ. My immediate goal is to master the art of mixing two songs smoothly—beat-matching, tempo syncing, clean transitions, the works—using nothing more than my laptop. No external controller, just the software and keyboard shortcuts. House, EDM, and other dance styles are the sounds I want to practice on, so you’ll need to tailor examples and practice material to that energy and BPM range. I imagine a few live screen-share sessions where you walk me through: • Setting up VirtualDJ for controller-free use (keyboard mapping, audio config) • Reading waveforms, aligning beatgrids, and locking in tempo manually or with sync • Sculpting transitions with EQ, filters, and b...
...actually blending tracks and I’d like your guidance inside VirtualDJ. My immediate goal is to master the art of mixing two songs smoothly—beat-matching, tempo syncing, clean transitions, the works—using nothing more than my laptop. No external controller, just the software and keyboard shortcuts. House, EDM, and other dance styles are the sounds I want to practice on, so you’ll need to tailor examples and practice material to that energy and BPM range. I imagine a few live screen-share sessions where you walk me through: • Setting up VirtualDJ for controller-free use (keyboard mapping, audio config) • Reading waveforms, aligning beatgrids, and locking in tempo manually or with sync • Sculpting transitions with EQ, filters, and b...
...actually blending tracks and I’d like your guidance inside VirtualDJ. My immediate goal is to master the art of mixing two songs smoothly—beat-matching, tempo syncing, clean transitions, the works—using nothing more than my laptop. No external controller, just the software and keyboard shortcuts. House, EDM, and other dance styles are the sounds I want to practice on, so you’ll need to tailor examples and practice material to that energy and BPM range. I imagine a few live screen-share sessions where you walk me through: • Setting up VirtualDJ for controller-free use (keyboard mapping, audio config) • Reading waveforms, aligning beatgrids, and locking in tempo manually or with sync • Sculpting transitions with EQ, filters, and b...
My first priority is to stop hearing both decks at once through my Bluetooth headphones when the crossfader is fully to one side in VirtualDJ. I am running only a laptop (no external controller or sound-card) and the headphones are paired via Bluetooth. I need you to: • Walk me through the correct audio settings inside VirtualDJ so the crossfader behaves properly and I can pre-cue one deck without it bleeding into the master signal. • Explain any Windows / macOS sound-panel tweaks that might be interfering with the software routing. • Show me how to test the fix live so I know the mix is clean in both the headphones and the master output. Once the crossfader and cueing are behaving, I’d also like a quick overview of how to route the master audio out to...
...actually blending tracks and I’d like your guidance inside VirtualDJ. My immediate goal is to master the art of mixing two songs smoothly—beat-matching, tempo syncing, clean transitions, the works—using nothing more than my laptop. No external controller, just the software and keyboard shortcuts. House, EDM, and other dance styles are the sounds I want to practice on, so you’ll need to tailor examples and practice material to that energy and BPM range. I imagine a few live screen-share sessions where you walk me through: • Setting up VirtualDJ for controller-free use (keyboard mapping, audio config) • Reading waveforms, aligning beatgrids, and locking in tempo manually or with sync • Sculpting transitions with EQ, filters, and b...
...actually blending tracks and I’d like your guidance inside VirtualDJ. My immediate goal is to master the art of mixing two songs smoothly—beat-matching, tempo syncing, clean transitions, the works—using nothing more than my laptop. No external controller, just the software and keyboard shortcuts. House, EDM, and other dance styles are the sounds I want to practice on, so you’ll need to tailor examples and practice material to that energy and BPM range. I imagine a few live screen-share sessions where you walk me through: • Setting up VirtualDJ for controller-free use (keyboard mapping, audio config) • Reading waveforms, aligning beatgrids, and locking in tempo manually or with sync • Sculpting transitions with EQ, filters, and b...
...actually blending tracks and I’d like your guidance inside VirtualDJ. My immediate goal is to master the art of mixing two songs smoothly—beat-matching, tempo syncing, clean transitions, the works—using nothing more than my laptop. No external controller, just the software and keyboard shortcuts. House, EDM, and other dance styles are the sounds I want to practice on, so you’ll need to tailor examples and practice material to that energy and BPM range. I imagine a few live screen-share sessions where you walk me through: • Setting up VirtualDJ for controller-free use (keyboard mapping, audio config) • Reading waveforms, aligning beatgrids, and locking in tempo manually or with sync • Sculpting transitions with EQ, filters, and b...
...autonomously on battery power. 2. Dimensions The complete assembly should be designed to fit within an indicative maximum envelope of: 150 × 65 × 45 mm (length × width × height). Components may be distributed within this volume rather than assembled into a single enclosure. Compactness is a priority. Please indicate the expected dimensions of the proposed assembly. 3. Operating Sequence The controller must perform the following sequence: 1. Activate the blower. 2. Activate the ultrasonic mist generator. 3. Stop the ultrasonic mist generator after a configurable period. 4. Continue operating the blower briefly. 5. Stop the blower. 6. Repeat the sequence according to the selected settings. Operating durations must be adjustable through firmware. 4....
I’m kicking off Phase 1 of a smart, impact-protective motorcycle vest and need a hands-on engineer who can take it from concept to working prototype. In this first stage you’ll design the garment structure, lay out high-visibility LEDs, specify and wire up a rechargeable battery pack, add a physical on/off switch, and integrate a compact BLE controller so the lights can be toggled and dimmed from a phone app. Key goals • Dual safety: the vest must cushion minor impacts and keep the rider highly visible. • Phone control: in the prototype the mobile app only needs to switch the LEDs on/off and adjust brightness, but the BLE firmware should be written with future signal functions in mind. • Rugged build: weather-resistant fabrics and sealed electronic...
Per Proposal Agreement and SOW
...that physically enforces unidirectional flow (OT âž” IT) with no return channel. • Native parsing of Modbus TCP on the inbound side and automatic repackaging or bridging to MQTT/MQTTS on the outbound side. TLS support is required for secure MQTT connections. • Configuration interface that lets me map Modbus registers to MQTT topics without vendor lock-in. • Throughput suitable for typical controller polling rates (please indicate benchmarked values). • Clear documentation covering installation, network segregation, and recovery procedures, plus sample configs for common brokers such as Mosquitto and HiveMQ. Acceptance will be based on a lab demo: I will feed live Modbus traffic from a PLC, observe that frames cross the diode only in the permitted direct...
...cinematic, blockbuster-style camera animation with cuts. Zero static cameras. o I need organic handheld motion, subtle floating, breathing, whip-pans, and dynamic tracking suited for intense action. o Important technical requirement: Subtle camera movements and micro-motions must be keyframe-animated manually via both the Camera and its Target (Aim)—DO NOT just slap a procedural Noise modifier/controller on the camera. Deliverables (per shot): • Native project file (.max or .blend) with clean scene organization and camera cuts set up on the timeline. • Clean viewport playblast / preview render (.mp4, 1080p, 24 fps) in shaded/solid mode (NO wireframe/edged faces), with timecode overlay. How to Apply & Free Sample Test: • Please bid your total package price...
...then closed up so the pad still looks stock. The one visible change I do want is a pair of small capacitive-touch patches on the top edge—one beside each shoulder button. Each patch is simply a 3 mm hole with a wire looped through and secured under conductive tape, the free end going to an unused Pico GPIO, identical to the touch point in the original wiring diagram. I will hand you: • the controller • the Pico (pre-headers) • two gyro boards • conductive copper tape • resistors, screws, tape, hot-glue sticks and solder Please bring only the thin, flexible stranded wire needed for the internal runs; everything else is covered. After assembly I’ll flash the firmware myself, so the deliverable is the fully re-assembled pad tha...
Hi, I want to modify a wired game controller (GameSir Tegenaria Lite) by fitting a Raspberry Pi Pico and 2 gyro sensors inside it, based on this open source project with full instructions and wiring diagram: I'd also like one extra thing included that is not in the official guide: 2 small touch patches on the top edge of the controller, as in this PHOTO: Each patch is a small hole in the shell with a wire passed through and held under conductive tape, and the other end goes to a spare Pico pin. The wiring is the same as the touch point in the guide. I'll handle the firmware myself. I already have the controller and will supply the Pico, the 2 gyro sensors and the conductive tape. Would you already have the small items, such as 100k resistors
...krijgen welke toegankelijk is voor de Fuxa server. * Configureer de S7-driver van FUXA voor elke PLC (inclusief de juiste rack/slot-instellingen, verbindingstype, polling-frequentie, enz.). * Koppel de relevante tags (ongeveer 30–40 per PLC; de lijst hiervoor lever ik aan). * Ontwerp overzichtelijke, responsieve schermen die actuele waarden, statusindicatoren en de verbindingsstatus van elke controller tonen. * Verwerk alles in mijn bestaande Docker-omgeving en lever het bijgewerkte 'compose'-bestand, het JSON-bestand van het FUXA-project en een korte handleiding aan, zodat ik het systeem op elke gewenste host kan opstarten. De oplevering wordt beoordeeld op basis van de volgende criteria: 1. Alle PLC's worden in FUXA als 'actief' (groen) we...
...STM32H745Zi board. Register access is already running; what I need is the maths. Your task is to fuse the IMU’s gyroscope and accelerometer so the MCU keeps an accurate estimate of its attitude and continuously subtracts the gravity vector. The end result must be two real-time, gravity-free linear acceleration values for the X and Y axes only. The code will sit in a small autonomous-vehicle controller, so it has to stay responsive during sustained vibrations, pothole like movements and slow tilting during slopes and hills—not just brief hand motions. Please keep latency low enough for a 400 Hz control loop and write everything in clean C that compiles inside STM32CubeIDE with HAL drivers. Deliverables • C source and header files implementing the orientation...
I am looking for an experienced remote studio technician or Windows audio specialist to diagnose and permanently resolve severe audio driver conflicts, software...ghost drivers • Disabling exclusive audio control modes and hardware acceleration Required Skills & Experience • Proven experience optimizing Windows PCs for professional audio production and low-latency recording. • Deep understanding of Focusrite ASIO drivers, virtual audio routing, and resolving conflicts between DAWs and communication apps (Zoom). • Ability to diagnose DPC latency, IRQ/USB controller conflicts, and BSOD crash dumps via remote desktop session (e.g., TeamViewer, AnyDesk, or Zoom). • Familiarity with Hindenburg Pro is a strong plus. Please share your relevant experience and ...
...that fall within a narrow range of size and weight, so the gripping routine can be standardized. Speed and accuracy are more important than adapting to a wide variety of parcel types. To succeed, the solution has to: • Run real-time image detection, barcode/label decoding, and destination lookup in one seamless pipeline. • Generate reliable pick coordinates and sorting commands for the robot controller with minimal latency. • Offer a simple dashboard or API endpoint for monitoring counts, mis-reads, and any items that need manual intervention. • Arrive with source code, trained AI models, and setup documentation so the system can be reproduced on additional lines. The project will be considered complete when a test line consistently detects every pass...
It was using the RC522 Mini and its Arduino library. One key feature was its ability to detect if an RF Tag or Card is present, every time i represent the same card. I need its reader to be able to detect a card once, read its values. If i remove the card and present it again, it should read its values again. If that´s possible with the PN532 as well. so basically it was aware if the card is still presented or near the reader and try to read it again after that presence was gone.
...pumps and irrigation valves remotely using long-range LoRa communication without Wi-Fi, GSM, or Internet connectivity. We are looking for an experienced **Embedded Hardware Engineer / PCB Design Engineer** to design two professional, compact, reliable PCBs. **1. Transmitter PCB – Handheld Remote** - ESP32 DevKit / ESP32 module integration - ILI9341 SPI TFT touchscreen interface - XPT2046 touch controller - Three physical push buttons - E32-433T30D LoRa module interface - Rechargeable battery and charging circuit - Power management and voltage regulation - USB charging and programming interface **2. Receiver PCB – Field Control Unit** - ESP32 integration - E32-433T30D LoRa module interface - Four-channel relay driver circuit - Four control outputs for water pump and...
...components and their integration into the existing Inventor project are required.** ## 1. Existing Project - Protective cage already designed in Autodesk Inventor. - One access door. - Drone operated inside the cage. - Drone power supply: 24 V DC / 10 A. - Separate 24 V DC power supply for the safety control system. ## 2. Required Electrical Components The electrical design must include: - Safety controller (Pilz PNOZmulti 2 or suitable alternative). - Safety door switch with electrical guard locking. - Multiple safety contact mats (Sicherheitskontaktmatten) inside the cage. - Manual reset button (Reset-Taster) outside the cage. - Two redundant safety contactors for the drone power supply. - Contactor feedback monitoring. - Main switch. - Power supplies (24 V DC). - Fuses an...
Hi Victoria, Our client will be advancing the project over multiple regional area service coverage platforms. Our client has expressed their interest in pursuing this project extension with the opportunity of your professional private contractor involvement. You are welcome to maintain contact should you have any inquiries. Thank you for your interest in our client's project's successful completion of its outcome. Respectfully, Project Coordinator Curt Klein
Important : We will only accept proposals that fall within our budget range (fixed price). If you have a different budget expectation, please do not submit a proposal. Project Description : Design the schematic and PCB for one irrigation controller. This is a hardware design job. Firmware is not included. The controller runs from 24 V DC. The MCU is fixed: Espressif ESP32-WROOM-32UE, external antenna, , at least 4 MB flash. Not a module with a PCB antenna, and not a development board. The board has wired 10/100 Ethernet and USB-C programming. Inputs: 3 float switches, 3 NPN level sensors, 2 pressure transducers, 1 pulse flow meter, and 1 two-wire leak probe. Outputs: 6 low-side MOSFET channels (2 solenoids, 1 irrigation pump, 1 mix pump, 2 low-current spares). A load may ...
...walkway that boosts curb appeal yet stays easy to maintain. An automatic watering system needs to be integrated from the start, with zones sized for future plant growth and a user-friendly controller. I’m open to your ideas on hardy, low-upkeep planting palettes and bed materials—as long as they reinforce the welcoming feel and tie in with the house’s style. Deliverables • Scaled site plan detailing walkway alignment, planting beds, hardscape materials, and irrigation layout • Plant schedule listing quantities, sizes, and key seasonal notes • Specification sheet for the automatic watering system (controller, valves, sprinkler or drip type) • Two to three perspective renderings or a SketchUp/3D view that shows the new entry exper...
...named Belgium document controller has to approve every single outgoing file. Key items I expect from you: • Information architecture and permission model for scalable, project-based SharePoint libraries • Power Automate or equivalent approval workflow that routes releases to the designated Belgium controller before external sharing is allowed • Clear, role-based metadata and versioning settings to distinguish working, review and final states • Template or provisioning script so the same setup can be cloned for future projects without manual re-work • Concise admin and user guidance so local IT in Belgium can support it after hand-over Acceptance criteria • Pilot library created, tested with sample documents, and locked down to Be...
...for sound detection and direction. Develop an attention manager combining visual and audio information. Enable the robot to automatically orient toward speakers or relevant visual events. Prioritize competing stimuli and avoid unnecessary attention switching. Implement fast reactions independently of the LLM. 5. Physical Movement and Emotional Expression Integrate the Pimoroni Servo 2040 controller. Support eight servos controlling the quadruped's legs, with additional servos planned for eye movement. Implement basic locomotion, including standing, sitting, walking, and turning. Integrate an animated eye and physical mechanical iris for expressive behavior. Synchronize eye, iris, and body movements with speech, emotions, and attention. Ensure smooth movements, saf...
...through-holes, and I will supply you with clear photos and a dimensioned sketch that capture every critical measurement. Your job is to translate those visuals into a reliable, collision-free G-code program ready for production. I’m open to whatever CAM workflow you prefer—Fusion 360, Mastercam, SolidCAM, or any other package—as long as the final code runs smoothly on a standard Fanuc-style controller. Deliverables • Verified G-code file, organized by tool and operation • Setup sheet listing tooling, speeds, feeds, and work offsets • A quick simulation screenshot or short video proving there are no gouges or crashes Acceptance Criteria The code must machine all features to the dimensions shown on the sketch, leave the specified finish allow...
...their clothing and interchangeable accessories • Buildings, furniture, and outdoor scenery pieces • Weapons, vehicles, and other interactive props Technical Expectations – Clean, animation-ready topology (LOD0 plus at least one lower LOD) – 4K PBR texture sets (Albedo, Roughness, Metallic, Normal, AO) baked from high-poly sculpts – Rigged, skinned characters with a basic humanoid controller compatible with Unity and Unreal – Source scene files (Blender, Maya, or 3ds Max), plus exported .fbx/.obj and packed texture folders – Naming conventions and scale that follow standard game-engine guidelines Acceptance Criteria • Assets import into Unity and Unreal with no errors • Materials look photorealistic under a ...
...cost analyses, expense breakdowns and monthly management accounts. Support date comparisons, drill-down and PDF, Excel and CSV exports. All accounting statements must reconcile with the general ledger and relevant subledgers. 16. USER ACCESS AND APPROVALS Provide roles for administrator, managing director, finance manager, accountant, project manager, procurement officer, payroll officer, store controller and read-only auditor. Apply permissions on the server and in the interface. Protect payroll, payment approvals, banking details, journals and period closing. Support configurable approval limits for quotations, purchases, variations and payments. Record approver, time, action and comments. Apply separation of duties to high-risk transactions. 24. IMPLEMENTATION GOVERNANCE Be...
...set-pieces, or clever obstacles that encourage exploration without overwhelming players. • Integrate a handful of fresh interactive elements (collectibles, simple traps, NPC props, etc.) so the environment itself contributes to gameplay rather than acting as a backdrop. All changes must plug neatly into my current Unity project (URP, Unity 2021 LTS), respect the existing camera and player-controller scripts, and stay organized in prefabs or tile palettes so I can tweak things later. Once done I expect the updated scene file, new sprite sheets or tilesets (PSD/PNG), and any C# scripts required for interaction. I’ll provide the full project, art guidelines, and a short video walkthrough. If this sounds exciting, tell me how you’d approach balancing visual p...
...request, your logic should sign and broadcast the transaction without manual intervention, then return the txid so they can track it. You’re free to tap into dogecoind / core JSON-RPC, Blockcypher, or another reliable API, but the final code has to be self-hosted, secure, and ready to drop into a typical PHP and JS front end and back end. Deliverables 1. Clean, well-commented integration code (controller + service layer + any helper scripts) 2. Database schema or migration script for tracking addresses, deposits, balances, and withdrawals 3. Postman or curl examples that demonstrate each endpoint 4. Read-me with setup, environment variables, and security notes 5. A short video or screenshots proving end-to-end deposits/withdrawals on testnet, then mainnet once a...
I'm looking for an experienced motor designer to create a magnet-free synchronous reluctance motor. This motor will be used in electric vehicles or e-bikes and should operate within a power range of 1 to 10 kW. Key Requirements: - Design a synchronous reluctance moto...or e-bike motor requirements - Strong background in electrical engineering and motor design principles Peak Power: 6.7 kW (9.0 BHP) * Continuous Power: 4.5 kW (6.0 BHP) * Max Motor Torque: 26 Nm * Nominal Operating Voltage: 48V DC architecture. * Peak Electrical Power: 6.7 kW (9.0 BHP). * Continuous / Rated Power: 4.5 kW (6.0 BHP). * Estimated Peak Current Draw: 135A – 140A (pulled from the controller under maximum acceleration in Rush mode). * Phase Configuration: 3-Phase Alternating Current (AC) input...
...reliably execute real business tasks end to end. This is ongoing ownership of the whole technical lane, not a one-off fix. WHAT YOU INHERIT - VPS running Hermes Agent (Docker) with scheduled jobs and Slack delivery - Controller -> Builder mission dispatch (open dispatch/callback regression; GitHub repo with recent PRs and issues) - OmniRoute model routing with fallback providers - Supabase "Shared Brain" evidence store; Notion and Google Drive knowledge sources - GitHub + Vercel deployments; workspace and dashboard front ends OUTCOMES IN YOUR FIRST SPRINT 1. Real Controller -> Builder mission: dispatch, callback, mission ID and ledger evidence, proven end to end 2. Four currently degraded assurance checks moved to PASS or a documented, specific blocker 3....
...current. Automatically record every ON/OFF event with date and timestamp. Calculate daily machine running hours. Display real-time ON/OFF status of all machines. Send machine data to our cloud-hosted database. Provide API integration support for our existing mobile and web applications. Scope of Work: Hardware selection and procurement. Complete hardware installation and configuration. IoT controller and firmware development. Cloud connectivity and API integration. Testing, calibration and commissioning. We already have a software development team managing our existing applications. The freelancer will coordinate with our team for integration. Please share: Recommended hardware architecture. Estimated hardware and installation cost for 9 machines. Project timeline...
...development time Develop the ESP32 (or similar MCU) firmware: pressure/presence sensing, addressable LEDs, digital display, Wi-Fi and BLE, plus camera, speaker and microphone integration Design the physical mat structure and electronics packaging in CAD: mounting for the display, camera, sensors, LEDs, controller and wiring; protect electronics from stepping loads; keep it serviceable; prepare parts for 3D printing or CNC Build a simple mobile-friendly web control interface that communicates with the controller (REST / WebSocket / MQTT / BLE) Prepare the BOM, wiring diagrams and step-by-step assembly instructions for our technician in California Lead remote troubleshooting, integration testing and the final functional demonstration by video call Deliver all firmware/source...
After demoting and removing our old Windows domain controller/DNS server (), file access over our Windows file share has become painfully slow whenever that machine is powered down. A quick netstat -ano | findstr 445 shows repeated SYN_SENT traffic toward , confirming the new server is still trying to reach the retired DC on port 445. Here is what I already know: • Staff open files via a standard Windows file share on a server. • The retired IP shows up in both DNS server records and a couple of Group Policy / logon-script items. • The former DC also handled DNS before its demotion. I need a clean-up that removes every lingering reference to , updates or recreates any stale DNS records, Group Policy objects, or logon scripts, and verifies that all authenticat...
...assembled without any extra work or modules. - Deliverables: EasyEDA (or KiCad) project, Gerbers, BOM with LCSC part numbers (parts in stock at JLCPCB), pick-and-place file, with ERC/DRC passing and the USB-C connectors suitable for JLCPCB assembly. - Please send me the schematic for review before starting the layout, and the layout before generating the final files. - Please tell me which hub controller you plan to use and whether USB 3.x needs a 4-layer board. Size constraint (important): the board must be no larger than 90 mm x 40 mm. The 90 mm side runs along the row of the four USB-A ports (the same length as the hub in the photo), and the 40 mm side is the depth of the board. The modem adapters extend beyond the board edge, as in the photo. Please confirm that the design f...
...can toggle on or off from the in-game settings screen. It will be used strictly in PvE modes, never in competitive PvP, so the behaviour can focus on making target acquisition feel natural rather than perfectly balanced. Core behaviour • When the crosshair drifts close to a valid enemy, the assist should apply gentle, configurable magnetism (not a hard snap) that feels subtle with mouse and controller alike. • Assist strength, radius and fall-off need to be exposed as variables I can tweak in Blueprints. • The system must respect the player’s preference flag: if the option isn’t enabled, no additional aim logic should run. Technical expectations • Unreal Engine 5 (currently on 5.3) – Blueprint implementation is fine, but clean C++ n...
...Anti-Spam Check: Start your proposal with the exact passphrase: "TITAN-VALIDATED". ===================================================================== ### Project Overview: We are seeking a Senior Hardware / Embedded Electronics Engineer to perform an end-to-end design audit, simulation, schematic completion, 4-layer PCB layout, and thermal/reliability validation for an industrial-grade ESP32 controller board. Schematic is currently ~85% complete in KiCad. --- ### Appendix A: Scope of Work and Deliverables #### Milestone 1: Schematic Audit, Peripheral Integration & Electrical Simulation ##### A. Scope of Work (Milestone 1) 1. **Circuit Simulation & Power Integrity (PI/PDN):** - Full audit of current KiCad schematic; fix industrial design flaws. - Simulate and ...
...staff. • The emphasis is on doing—learners should spend most of their time assembling, coding, printing, flying, and troubleshooting rather than watching slides. Scope of work You will design and deliver a series of modular workshops that blend basic demonstrations with guided, build-and-fly (or build-and-print) projects. Typical topics might include: – Drone safety, frame assembly, flight controller setup, and first-flight practice – Robotics fundamentals using Arduino or Raspberry Pi, sensor integration, and simple autonomous tasks – 3D modelling in Tinkercad/Fusion 360, slicing, printer calibration, and post-processing Deliverables 1. A clear session plan for each module, timed for 60- to 90-minute blocks 2. Materials list and pre-s...
...changeovers between sizes should be tool-free or require only quick-change tooling. If you have experience with cam-driven benders, servo-based CNC wire forming, or hybrid approaches, let me know which architecture you would adopt and why. Please include in your proposal: • 3D CAD assemblies and detailed part drawings suitable for fabrication • Motion/control schematic (PLC or dedicated motion controller) with suggested sensor and actuator list • Bill of materials with manufacturer part numbers and estimated costs • Cycle-time estimate for the smallest and largest clip sizes • A brief note on safety guarding and CE/UL considerations if relevant I will review concepts based on mechanical soundness, projected throughput, and clarity of document...
...inserted in either orientation. The present design’s data path is only USB 2.0 low-speed, so D+ and D- simply need to be bridged to both sets of A/B pins on the USB-C side. What I do need added are the correct CC1/CC2 pull-down resistors so the port negotiates 5 V power in either direction, plus any layout tweaks to keep impedance and clearances clean. No high-speed differential routing or USB-PD controller is required—just solid compliance for reversible 5 V, 1A operation and reliable data transfer at the existing low-speed rate. You will receive the current schematic and PCB file (KiCad). After the modification I will need: • Updated schematic with the new Type-C connector and CC network • Revised PCB layout ready for fabrication • Regenerated ...
...their look, function, and overall user experience without touching checkout or other areas of the site. What I have in mind • Re-arranging existing elements, adding or hiding fields, and improving the visual hierarchy so key information stands out. • Tweaking the underlying Twig templates, controller logic, and CSS so the pages stay fast and fully responsive. • Ensuring any edits play nicely with current extensions and the default OpenCart 3 architecture. Deliverables 1. Updated template, controller, and style files for and (or their Twig equivalents). 2. Clear notes on every file you touched so I can replicate the work on staging or future themes. 3. A brief test report confirming that core functions—price display, add-to-cart, pagination,...
...Google Pay, Samsung Pay, etc.) and our own closed-loop prepaid vending cards, then return a simple “approved/declined” signal on the existing vending bus. The machine firmware will handle product release, so all you have to supply is reliable payment capture and a clear on-device approval indicator. What I’m looking for • Schematic, PCB layout and component BOM for the reader, antenna and controller. • Embedded firmware (preferably in C/C++ or an RTOS you’re comfortable with) that handles card/wallet detection, secure transaction processing and basic prepaid-card balance checks. • Simple API spec or command set showing how the module reports Approved/Declined over the standard connection. • 3D enclosure design ready for injecti...
...or equivalent). 2. Fusion 360 CAM/Mastercam File: Original .f3d/mcam file containing the model, machining setups, tools, and toolpaths. 3. Actual Machine-Run G-code: Original CNC programs used during production, covering every setup or clamping operation. 4. 2D Production Drawing: Original drawing with dimensions and tolerances (PDF or DWG). 5. Part Information: Material, machine make/model, controller, shop location, and relevant production details. Data Ownership & Authorization All files must come from genuine, completed production jobs. The machine shop must own the files or have explicit permission from the rights holder to share and license them. We do not accept confidential, NDA-restricted, export-controlled, or unauthorized customer files. Shop and customer informat...
I need a single, well-structured gateway virtual machine that will act as Domain Controller, profile server, and network gateway for several Hyper-V hosts running on the same network. Scope • Deploy and harden the gateway VM on Hyper-V. • Promote it to a DC and configure required roles (DNS, DHCP, file/profile services). • Audit each host’s virtual switch configuration, standardising names and uplink mappings so every VM can route traffic consistently through the new gateway. • Migrate existing static-IP virtual machines to the gateway-managed addressing scheme with minimal or no downtime. Key expectations • Clean PowerShell-based build scripts or clearly documented manual steps. • Rollback and testing plan covering basic ping te...
...intended design. Product Specifications: Capacity: Approximately 50 litres. Approximate dimensions: 400 mm W × 300 mm D × 700 mm H. Material: Brushed stainless steel. Front-opening access door. Removable top lid. Manually sliding internal bag-support frame. Bag-clamping mechanism. Four caster wheels, including two locking casters. Internal space for electronic components, including a controller, battery, and weight sensors. The product does not require motors or automated opening mechanisms. Scope of Work: We are looking for: Complete 3D mechanical CAD design. Design for manufacturing (DFM) considerations. Detailed 2D manufacturing drawings. Editable CAD source files and STEP files. Assembly design and component integration. Manufacturing or coordin...
...development time Develop the ESP32 (or similar MCU) firmware: pressure/presence sensing, addressable LEDs, digital display, Wi-Fi and BLE, plus camera, speaker and microphone integration Design the physical mat structure and electronics packaging in CAD: mounting for the display, camera, sensors, LEDs, controller and wiring; protect electronics from stepping loads; keep it serviceable; prepare parts for 3D printing or CNC Build a simple mobile-friendly web control interface that communicates with the controller (REST / WebSocket / MQTT / BLE) Prepare the BOM, wiring diagrams and step-by-step assembly instructions for our technician in California Lead remote troubleshooting, integration testing and the final functional demonstration by video call Deliver all firmware/source...