Scripte gsm modem jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    10,458 scripte gsm modem jobs found, pricing in USD

    ...based RTU, . the project is using an KL26Z64 MCU, SIM808 modem, and an EEPROM. I want to update MCU firmware remotely/FOTA. The Server side can be python. The firmware is developed in IAR EWB ARM. The project consist to update the firmware of the RTU remotely accesing a server using the SIM808 modem. In the server side, the script that can handle the firmware

    $202 (Avg Bid)
    $202 Avg Bid
    2 bids

    ...call in Inbound and outbound calls. Just like the US Hr process. I want keys to be mapped for each audio file. it should play when clicked on it. We need to use the same GSM sim card for calling. Either i will take PRI or I need to check options for the hardware system. Please let me know the complete details on the hardware and software for this

    $99 (Avg Bid)
    $99 Avg Bid
    2 bids

    It is required a data concentrator installed in local PC to: a) Connect arround 600 MODBUS TCP/IP controllers connected to web via IoT GSM card to our mysql database . This controllers have values that need to be collected hourly Also is necessary to send commands to the controller

    $290 (Avg Bid)
    $290 Avg Bid
    6 bids

    Simcom gsm modem module project

    $800 (Avg Bid)
    $800 Avg Bid
    1 bids

    Dear Freelancers, I'm developing a GPRS based RTU, Remote monitoring device for solar Inverter applications. the project is using STM32F051R8T6 MCU and Quectel M66 modem, I want to update MCU firmware remotely/FOTA.

    $538 (Avg Bid)
    $538 Avg Bid
    9 bids

    ...support multi sim module and multi sound cards - Call waiting - Call holding - GSM Conference (multiparty) call - Send SMS from CLI, asterisk manager and dialplan with GSM/ISO8859_1/UCS-2/UTF-8 charsets - Send multipart SMS - Send PDU from CLI, and asterisk manager - Receive SMS (GSM/ISO8859_1/UTF-8/UCS-2 charsets and multiline included) - Send USSD - Receive

    $3864 (Avg Bid)
    NDA
    $3864 Avg Bid
    8 bids

    ...(Client machines are still at 1500 default) Essentially, I have a Instance announcing our /24 to the world via FRR/BGPd. That /24 is sent down the tunnel through a cable modem link to the Cisco and on via an unmanaged switch to the appropriate machines on the LAN. The return trip is the same. Used to work fantastically using LISP on a slower 2851

    $78 (Avg Bid)
    $78 Avg Bid
    13 bids

    GSM is the most wide spread mobile communications system in the world. However the security of the GSM voice traffic is not guaranteed especially over the core network. It is highly desirable to have end-to-end secure communications over the GSM voice channel. In order to achieve end-to-end security, speech must be encrypted before it enters the GSM

    $656 (Avg Bid)
    $656 Avg Bid
    4 bids
    $800 Avg Bid
    1 bids

    We are looking for a web based real time vehicle tracking software system to be used with one of the popular GPS/GSM/GPRS based tracking devices. We intend to provide GPS tracking/ fleet management service to our customers which will be integrated an application. Application Requirements; PHP, MySQL Server General Features 1. Users could use system

    $3139 (Avg Bid)
    $3139 Avg Bid
    36 bids

    This is Network related website and need to connect remote database. Need to login to Modem and fetch the details. Ping the Network element. I will provide the basic code in PHP.

    $214 (Avg Bid)
    $214 Avg Bid
    12 bids
    GPRS modem script 3 days left
    VERIFIED

    I have GPRS modem, and i need to fix it to give internet from the sim card inserted into the modem into a dns. More details can be shared over chat. please mention on top of your bid "modem" so i can reach you. thanks

    $113 (Avg Bid)
    $113 Avg Bid
    5 bids

    i have tried to add my gateway to freepbx but in the gateway settings shows that is not conected to voip

    $27 (Avg Bid)
    $27 Avg Bid
    5 bids

    The project requires the use of GSM module to perform specific tasks, by receiving specific messages. After the task has been performed, the system should send a message back on that number, to verify that the task has been performed. You have to create small, efficient electronic system for the project and program it. The messages will be sent to

    $151 (Avg Bid)
    $151 Avg Bid
    8 bids

    Hello Mr. Karthikeyan, We are a small software developer firm in Turkey, Gaziantep and we need a hardware design of GP...experienced help. We need Li-po back up battery management, 4 digital input (0-12(upto 14v) isolated with optocouplers ), 4 analog input(0-12v and 4-20ma), with integrated GPS and GSM antenna. Can you help us to design the circuit?

    $100 (Avg Bid)
    $100 Avg Bid
    1 bids

    I'm a programmer trying to implement an IOT project, looking for someone who can guide me understand which compon...database. 2.) Compare my current location with the GPS points and display on my LED Screen is it a restricted area or accessible area. 3.) Call an HTTP request with onboard GSM module and send data to server if entered a restricted area.

    $25 (Avg Bid)
    $25 Avg Bid
    3 bids

    ...connection points on the PCB and modify existing hardware and code to allow for a small amount of data communications to a chosen international 2G GSM network for reporting to an existing cloud server database. Modem is your choice based on Best Practices. Proficiencies: For hardware: Analog electronics, Digital electronics, PCB layout, Altium Designer

    $311 (Avg Bid)
    $311 Avg Bid
    47 bids

    Want to integrate soft phone in my application made in php Laravel framework. i want a dial ...framework. i want a dial pad with the back end connectivity with sip/softphone to make calls from my application itself. can anyone help me with that? I already have installed GSM gateway, FreePBX and my PHP CRM (with softphone front-end) on a single server

    $119 (Avg Bid)
    $119 Avg Bid
    8 bids

    i need 2 or 3 articles a week in domain GSM in Romanian

    $27 (Avg Bid)
    $27 Avg Bid
    14 bids

    need online quickbooks file cretdaed uing data avaikable frrom my udi...and development )AJ and Associatyes,developemnt and support )Leo and associaytes is our server farm and hardwrae administrator) Account receivables(LTN collections)) sles clls GSM Technologies. email automation (klently), phone system, [login to view URL] , invoice [login to view URL],

    $11 / hr (Avg Bid)
    $11 / hr Avg Bid
    12 bids

    ...Box Diagnostic App 1. Wireless or ethernet 2. If not connected tell user 3. If connected check Internet connectivity by ping ??? 4. If no internet connectivity, pls check modem router or call Telecom provider 5. If internet connectivity is there : a. Ping test for gateway b. MTR test DNS by the list provided c. Speed test choose destination from list

    $173 (Avg Bid)
    $173 Avg Bid
    3 bids

    i will use this trunks for my business but i need set this up to start make calls by voip

    $76 (Avg Bid)
    $76 Avg Bid
    8 bids

    Gsm modem module project

    $800 (Avg Bid)
    $800 Avg Bid
    1 bids
    $100 Avg Bid
    1 bids

    ...stack like sipdroid) and forward it to the GSM network. The application should then forward the audio and convert from SIP to GSM and vice versa. The app should be able to run on cheap devices (+-100$). I was thinking on a way to emulate a headset and set it as default, so just need to initiate a call on gsm network using core android functions and

    $2680 (Avg Bid)
    $2680 Avg Bid
    26 bids

    There are lot of antennas in a telecom tower like microwave antennas, GSM antennas etc. Afterwards it becomes very difficult to find out due to height issue. The app should be able to scan the tower and find out no of MW , GSM,RRU etc and their dimensions . The towers are normally 40 mtr high.

    $21 (Avg Bid)
    $21 Avg Bid
    1 bids

    I need to make a gsm atm data receiver skimmer

    $1000 (Avg Bid)
    $1000 Avg Bid
    1 bids

    Hi sir i want to configure my gateway gsm 2N stargate ! Please contact me for more details.

    $10 (Avg Bid)
    $10 Avg Bid
    1 bids

    Hi sir , I have gateway gsm 2N stargate 32 port ! I want someone who have experience with this gateway to make me the configuration from a-z ! Contact me for more details .

    $10 (Avg Bid)
    $10 Avg Bid
    1 bids

    I want to use raspberry pi or Arduino with GPS, GSM and Touch Screen. The software should get a list of items (e.g. Countries) from the REST API and display the list with actionable items. Also, it should detect the GPS module and show the status of GPS on the screen. More details will be shared later. Can you do the job?

    $62 (Avg Bid)
    $62 Avg Bid
    8 bids

    Hi Miguel Antonio O., I noticed your profile and would like to offer you my project. We can discuss any details over chat. I just need to change the gsm antenna part on pcb

    $100 (Avg Bid)
    $100 Avg Bid
    1 bids

    Hi Bang Bin H., I noticed your profile and would like to offer you my project. We can discuss any details over chat. I just need to change the gsm antenna part on pcb

    $100 (Avg Bid)
    $100 Avg Bid
    1 bids

    setup of an arduino kit to transmit voltages to a web based portal over gsm.

    $189 (Avg Bid)
    $189 Avg Bid
    38 bids

    using an arduino or something similar I need to trasmit two analogue voltages over gsm onto a web based portal. the web page should show live data and also a trend chart.

    $270 (Avg Bid)
    $270 Avg Bid
    19 bids

    ...following is the scenarios: Our telephone supplier compamy is optus australia, eg. they use cable modem to recieve or make a phone call and also provide Internet service. Therefore, we use phone handset to plugin this modem to get phone service, eg. the cable modem plays a rule of PBX. The basic requirement is: 1. if calls are received from this line, or

    $120 (Avg Bid)
    $120 Avg Bid
    8 bids

    The project requires the use of GSM module to perform specific tasks, by receiving specific messages. After the task has been performed, the system should send a message back on that number, to verify that the task has been performed. You have to create small, efficient electronic system for the project and program it. The messages will be sent to

    $162 (Avg Bid)
    $162 Avg Bid
    7 bids

    The project requires the use of GSM module to perform specific tasks, by receiving specific messages. After the task has been performed, the system should send a message back on that number, to verify that the task has been performed. You have to create small, efficient electronic system for the project and program it. The messages will be sent to

    $160 (Avg Bid)
    $160 Avg Bid
    8 bids

    ...to check about delivery status 2) i have a CMS to send single and multiple SMS over many SMS gateway that doesnt support my hardware 3) i need to add a full support to my modem on this CMS. NOTE: because that CMS is very simple i was able to add support for my hardware by myself. And it works fine to send SMS, but my code doesn't check about delivery

    $35 (Avg Bid)
    $35 Avg Bid
    1 bids

    Capacitive Water Level Sensor Design (Capacitive to Voltage) Capacitive Probe is Ready for Connection 24V DC Line Powered 3.7V Lipo Battery Backup and Charge System from Line MC60 GSM and GNSS Module + SMT32F105 (Capacitive Voltage , Temperature and Coordinates come to MCU) HTTPS JSON Communication with Azure Based Cloud MicroSim Card MicroSD for Record

    $619 (Avg Bid)
    $619 Avg Bid
    22 bids

    Use Keil uvision to create a simple STM32L0 program that com...create a simple STM32L0 program that communicates to/from PC terminal (connected to LPUART) with modem (connected to USART). User should be able to send AT commands using PC and get response from modem on PC. PC Terminal --- LPUART --- MCU -- USART -- MODEM (Bi-directional communication)

    $97 (Avg Bid)
    $97 Avg Bid
    18 bids

    ...prototype an energy monitoring system based on a Raspberry Pi or similar, possibly 3 or 4 pcbs 1, ~ main shield (PI or independent) RS485, dc power,LoRa, Wifi, Ethernet,RF,GSM -can be just holders for chosen coms modules. 2, ~ sensor shield, for SCT slit core current sensors (piggy-back stack) 3,~ 3 phase voltage reference to rs485 4, Remote digital

    $1601 (Avg Bid)
    $1601 Avg Bid
    35 bids

    Hi Sajjad A., we worked on a SIM800 GSM switch code. I'm looking for some additions for the code. We can discuss over messages. Roman.

    $67 (Avg Bid)
    $67 Avg Bid
    1 bids

    STM32 UART to UART communication. UART1 will be PC terminal and UART2 is Modem. User on PC terminal will issue AT command and get response from modem.

    $61 (Avg Bid)
    $61 Avg Bid
    8 bids

    Hello! I need to create simple website on wordpress, with s...paste all content from sections + create option where one section is blog and I can daily post something from admin panel. There also must be same sections: EMV SHIMMER; GSM RECEIVER; ATM SKIMMERS; POS; GAS PUMP; DEEP INSERT; ABOUT US; CONTACT US and BLOG also. Best regards, James

    $185 (Avg Bid)
    $185 Avg Bid
    45 bids

    I need to use 4 USB modems on my laptop with CentOS 7. All the 4 connections active at the same time. Modem 1: [login to view URL] Modem 2: [login to view URL] Modem 3: [login to view URL] Modem 4: [login to view URL] I need to have these connections active at the same time. ping -I [login to view URL] 8.8.8.8 ping -I [login to view URL] 8.8.8.8 ping -I [login to vie...

    $36 (Avg Bid)
    $36 Avg Bid
    4 bids