Send data php ethernet shield jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    7,045 send data php ethernet shield jobs found, pricing in USD
    Trophy icon Logo Designer/ Mascot Designer 29 days left

    ...right hand he will be carrying a spear which will run strait across 180 degrees, and in his left a Spartan-like shield with a very basic depiction of an ant with roman numerals around it (top view with its head toward the top of the shield). The reason for the ant is because myrmidon comes from the Greek word myrmex. I was envisioning that his right

    $100 (Avg Bid)
    Guaranteed
    $100
    0 entries

    ...OS is Ubuntu 10.04, which requires new drivers to boot on the Supermicro Atom C3000 motherboards. We need to keep the same OS. We only need USB and Ethernet working. The Intel ixgbe driver for Ethernet supports > kernel 2.6.18, which includes Ubuntu 10.04. Intel should provide the equivalent for USB. This project is to get Ubuntu 10.04 to boot on

    $478 (Avg Bid)
    Featured
    $478 Avg Bid
    4 bids
    Web Scraping 6 days left
    VERIFIED

    ...between 10 and 50. They must be licensed by the state and Medicare certified. They must also have contracts with, take private insurances such as Aetna, Cigna, Blue Cross Blue Shield (BCBS), PHCS, Multiplan, Care-Care etc. ...

    $44 (Avg Bid)
    $44 Avg Bid
    26 bids

    Hi Am looking at integrating an Autolabel T63 Thermal transfer printer ([login to view URL]) over ethernet to al allen bradley compactlogix (logix5000). Using their ACP protocal ([login to view URL]) would like to build a routine or AOI to handle all the "marker_Setting_Set"

    $120 (Avg Bid)
    $120 Avg Bid
    5 bids

    ...on Allwinner H5 processor in Circuit Maker. (No altium!, Only Circuit Maker) I want the following parts on the PCB: - Allwinner H5 processor (running at 1.5GHz) - 1000Mbps Ethernet (+ POE enabled) - 1GB DDR3 RAM - 8GB NAND Flash - Size of the board: about 30mm x 40mm - A GPIO port with the following pins: * USB 2.0 x1 * I2C port x3 * UART x2 * PWM out

    $986 (Avg Bid)
    $986 Avg Bid
    12 bids

    Good Day All Node/GraphQL coders, I'm looking for someone to do a POC project in node using graphql-yoga, graphql-shield and jsonwebtoken components. Please provide details on experience with above in your initial introduction. Please do not hesitate to make contact. I want to hear from you. This initial POC is a 24 hour exercise therefore all submissions

    $502 (Avg Bid)
    $502 Avg Bid
    10 bids
    Trophy icon Rodeo Logo 1 day left

    I need this logo to have a professional look and feel. 1) the outline needs to be thin and color Black. Colors are white, re...outline needs to be thin and color Black. Colors are white, red and black 2) I uploaded the signature 3) I want to keep the shape of a shield TRY a DESIGN using this text layout with the Armor Shield design.

    $15 (Avg Bid)
    Guaranteed
    $15
    51 entries

    Hardware: Arduino Uno, DS18B20 temperature sensor, 16x2 LCD display shield and servo motor. Objective: PID control of the servo motor to open and close a valve to regulate the temperature inside a condenser. We are cooling a hot condenser with cool water. The temperature SetPoint must maintain a temperature difference of no more than one

    $77 (Avg Bid)
    $77 Avg Bid
    25 bids

    letting to say "Secu...Tec". Place Security above Tec. Align Tec to the right of Security. Underline under Tec, (but long enough to cover all lettering). Place Shield Logo on Left of Security Tec wording. Please remove color of shield, Shield Logo Color should be White Font: Times New Roman or Designer Suggested Font Color: White Background: Navy Blue

    $30 (Avg Bid)
    $30 Avg Bid
    82 bids

    The shield is to have 23 IR transmitters addressed multiplexed. the system will have a PC communicating with 2 arduinos via rs485. Each arduino will communicate with 2 arduio via I2C. the shield will have all the cabling to connect with a motor driver MD10c from Cytron and a load cell A/D converter HX711 serially. You will need to know electronics

    $615 (Avg Bid)
    $615 Avg Bid
    23 bids
    Trophy icon Logo/Icon Design 4 days left

    DO NOT REDESIGN THE SHIELD LOGO that is attached. IT IS FOR REFERENCE ONLY. Looking for a designer to build a series of logos for our family of other products. We would like for you to use the attached Shield logo as inspiration and develop logos/Icons for any of the following 2 product names listed below. The logos should feel like they are

    $200 (Avg Bid)
    Top Contest
    $200
    89 entries

    Design a 8 port Ethernet switch. The chipset will be specified (uses 2 switching ICs and 8 phy chips). You will be required to create schematics symbols, schematics sheets, footprints for ICs and layout.

    $577 (Avg Bid)
    NDA
    $577 Avg Bid
    17 bids

    ...formats from com port 1 and com port 2 and create standard output data string. 3 parameters are to be measured using ADC. send final data from output data string to remote server through http post, IFTTT, and/or UDP socket, and optional modbus. set status LEDs, and send out status/debug data through com port 2. 1. Standard ESP32 board will parse incomi...

    $612 (Avg Bid)
    $612 Avg Bid
    3 bids

    data from PLC through ethernet tcp/ip ,i want to display data using arduino uno

    $132 (Avg Bid)
    $132 Avg Bid
    15 bids

    Data need to be pulled from a factory PLC. Here are the main requirements: PLC: Simatic S7-414 6ES7414-3XJ00-0AB0 Communication protocol: Profinet Communication interface: Ethernet Any solution using Excel VBA is welcome. Candidate must be ready to share similar previous projects.

    $197 (Avg Bid)
    $197 Avg Bid
    9 bids

    Hello! We need in new...2. Use colors from our website (black, red) We like something like that: [login to view URL] [login to view URL] [login to view URL] [login to view URL]

    $70 (Avg Bid)
    $70 Avg Bid
    36 bids
    Trophy icon Fund Management Logo 25 days left

    ...consider. Either one of the shapes to consider within or around the eagle: 1. Round shape somewhere that would represent an EYE as a whole but not too obvious as well. 2. Shield. What does Masceive mean? Mas stands for Mass - a large number of people or objects crowded together. the site is also crowd funded - the quantity of matter which a body contains

    $110 (Avg Bid)
    $110
    99 entries
    St Grants Homes Group 1 day left
    VERIFIED

    We are a property company and we want a logo to go on ...be a strong professional Corporate font. We want the logo to be a coat of arms to include: -A Black Stallion Horse on one side -A Lion On the other side -Zulu Shield -Knight Shield -1 Spare -1 Sword -Kings Crown connected to a Queens Crown Interlocking -Words in the ribbon-Love Joy Peace

    $124 (Avg Bid)
    $124 Avg Bid
    41 bids

    I have to cover elements marked in green. Shield height is 130mm. This should be very simple cover made with 2mm mild steel, painted in yellow, with small slide doors to check the belt which is covered. 3D model + 2D DWG for laser cutting and bending

    $33 (Avg Bid)
    $33 Avg Bid
    55 bids

    -I need someone to design and execute Nonlinear Model Predictive Contro...-RGB Camera ( Front view ) -RGB Camera ( Rearr View ) -Upboard computer with the following specs:- -Intel x5-Z8350 (4*cores) -4GB RAM, 64GB eMMC -4*USB ports , GPIO -WIFI and ETHERNET -Steering will be done through differential torque between 2 motors mounted on the rear wheels.

    $534 (Avg Bid)
    $534 Avg Bid
    5 bids

    ...image to start configuring the VM host. There are 4x motherboard hardware interfaces that get directly mapped by the host to the 10.04 image: 1x USB 2.0, 1x USB 3.0, and 2x Ethernet interfaces. We don't care about any of the other physical interfaces, since (I) the only operation of the host is for the single 10.04 image, and (ii) this is an embedded

    $550 (Avg Bid)
    Featured
    $550 Avg Bid
    9 bids

    Hi, We want to open a project regarding to a s...Altera or Xlinx FPGA. As the milesotones: 1. Creation of camera controller to achive area scan and high speed line scan functions. 2. Sending image over USB 3.0 or Gigabit ethernet 3. Testing The estimated period is max 8 weeks. Can you please inform us your interest and availability. Best Regards.

    $1 / hr (Avg Bid)
    $1 / hr Avg Bid
    1 bids

    Hi, We want to open a project regarding to a s...Altera or Xlinx FPGA. As the milesotones: 1. Creation of camera controller to achive area scan and high speed line scan functions. 2. Sending image over USB 3.0 or Gigabit ethernet 3. Testing The estimated period is max 8 weeks. Can you please inform us your interest and availability. Best Regards.

    $1 / hr (Avg Bid)
    $1 / hr Avg Bid
    1 bids

    Hi, We want to open a project regarding to a s...Altera or Xlinx FPGA. As the milesotones: 1. Creation of camera controller to achive area scan and high speed line scan functions. 2. Sending image over USB 3.0 or Gigabit ethernet 3. Testing The estimated period is max 8 weeks. Can you please inform us your interest and availability. Best Regards.

    $1 / hr (Avg Bid)
    $1 / hr Avg Bid
    1 bids

    Dear Muhammad, I am looking for an Hardware Engineer having experience with FPGA/ASIC in the Ethernet area. We want to build and develop a product and it looks that you would be able to do that. More details about the project I would share in the chat.

    $10 (Avg Bid)
    $10 Avg Bid
    1 bids
    Trophy icon Design Me A Logo Ended

    My Potty Pal is a portable, foldable, toddler...a portable, foldable, toddler potty seat cover with four quadrant nodules covered by bottle caps/non-skid pads and an apron/leg shield which are replaceable or washable. These bottle caps/non-skid pads and apron/leg shield are the only parts of the foldable potty seat that touch the standard toilet seat.

    $110 (Avg Bid)
    Guaranteed
    $110
    106 entries

    Using an existing code base, integrate a transmitter/ receiver unit into a touchscreen interface using an Arduino Mega, touch screen shield and a touch screen. *note* you must provide references for similar projects and have a high rating to bid on this project. Requirements: 1. Provide tested, debugged code that requires no more than two rounds of

    $189 (Avg Bid)
    $189 Avg Bid
    18 bids
    Trophy icon Company Logo Design 21 days left

    ...image of what we're looking for. This image comes from Warcraft, so we don't own it. However, we want a shield like this. Main shield color should be black or silver. The color of the shield border can be any color you want. The center of the shield should have a "V". The company is a digital advertising company. You can go for the cartoony/gamer...

    $50 (Avg Bid)
    $50
    50 entries

    ...looking for someone to colocate our mini Intel NUC server (5,2" x 5,2" x 3.5" in size) by connecting it to your residential internet connection (to your internet router via ethernet cable). We set up the server in such way that ONLY the traffic of 4 popular UK streaming web sites ever reaches the Intel NUC server. If you have doubts you could sniff

    $1800 (Avg Bid)
    $1800 Avg Bid
    1 bids

    I need a pcb design usin eagle. It is a shield for Arduino Pro Mini, The parts i am using: Arduino Pro mini Atmega 328mu Eeprom 24LC512 Rtc Ds1307 Xbee PRO I need the part size to be 1206 and the board size to be around 60mmx25mm

    $68 (Avg Bid)
    $68 Avg Bid
    23 bids

    ...Advantage [TRY NOW] [ICON] Security Solution Security Advantage [TRY NOW] 3. Select the security solution Wheel that loads the security including a lock and privacy shield 4. Notification Your organization is Protected Smaller additional text 5. End display Ready to get started? Get in touch with our Security Team today Contact .......

    $90 (Avg Bid)
    $90 Avg Bid
    29 bids

    ...that shows the number of bullets you still have Three less important things: -The selected type of gun (you can choose between a pistol/shotgun/ machine gun/sniper) ==> I will send you a render of the gun. We didn't choose the color of the gun yet. Take the design of this gun as a reference for the four other guns -The Team you are in (you can choose

    $57 (Avg Bid)
    $57 Avg Bid
    1 bids

    For details please see [login to view URL] attached and other files LCD I use ( [login to view URL] )

    $193 (Avg Bid)
    $193 Avg Bid
    10 bids

    We are an entertainment company, we look for a logo with a shield, the company name is Medieval VIP and our products are entirely for adults for very particular appetites and sophisticated tastes so.... in other words we make the fantasy come true, whatever it may be. We do not want cliparts or adaptations of other designs, if you do not know how

    $80 (Avg Bid)
    $80 Avg Bid
    66 bids

    ...create a wood family crest. I will be painting the completed sign after it is cut (or engraved) and will finish using epoxy resin. The shape of the piece of wood will be the shield as shown. Am also open to the idea of a 3d crest which could be cut out. Any design ideas are welcome. Project should only take an hour, maybe two hours at most if software

    $20 / hr (Avg Bid)
    $20 / hr Avg Bid
    13 bids

    ...especially for long entombed skeletons, are of rusty style: mace, armor and kite shield (pure metal these since wood would have been rotten). The first bow should be of "good quality", so no broken or rusty stuff here (won't be worn by "old" skeletons). For the shield, mace and bow, i included an impression picture, the armor is pure artistic freedom

    $209 (Avg Bid)
    $209 Avg Bid
    1 bids

    I want 3 visuals 1 Label 2 Logo 3 Label on bottle I want to develop the above on a bottle ...3 pieces Deet Free Patented Technology Effective 4 hour+ All Natural Ingredients 6oz No Nasties The style should balance between natural and scientific - perhaps a green shield with medical plus - I'm open to creative ideas. Mosquitoes or bugs can feature.

    $100 (Avg Bid)
    Guaranteed
    $100
    14 entries

    Our catalog has a custom search bar setup: [login to view URL] Right now this search bar only shows up on the first page of the product archive. We need it to also show up in the same spot of the successive archive pages.

    $159 (Avg Bid)
    $159 Avg Bid
    41 bids

    It is a food restro which become online after some time so we want a logo Which have a chef face with fork and spoon and a shield which contain name "sbliya" it is midnight food delivery service , food delivered 6:00pm to 3:00 am.

    $22 (Avg Bid)
    $22 Avg Bid
    16 bids

    Need someone to edit an INF file - VERY Simple, should take literally 5 minutes.

    $14 (Avg Bid)
    $14 Avg Bid
    2 bids

    Interface for Speed and Start/Stop Control over ethernet using a microcontroller. VFD to be used is a PowerFlex 70 from Allen-Bradley. Micrologix 1400 PLC controller to be used.

    $505 (Avg Bid)
    $505 Avg Bid
    11 bids

    ...of the hash function; 4. FPGA must transmit information over the Ethernet interface (UDP protocol); 5. Basic information for transmitting the value of Nonce corresponding to the goal (current complexity); 6. Supporting information is shown in the application Interfaces.pdf. 7. Ethernet interaction scheme with xcku035-1ffva1156c chip. See the application

    $625 (Avg Bid)
    $625 Avg Bid
    3 bids

    We, Polite Social, are offering a job for Friday Jan 11th for 3 hours. We are having an event in Melbourne and need help with networking three computers together via ethernet or WiFi. - Freelancer must me Melbourne based - Must have networking experience - Will travel on-site to Federation Square, Melbourne

    $15 / hr (Avg Bid)
    $15 / hr Avg Bid
    3 bids

    Need a full time .net developer to develop a data acquisition desktop software with real time data & charts display, data logging capabilities and data communications over USB & Ethernet. More details will be shared over chat.

    $5476 (Avg Bid)
    $5476 Avg Bid
    37 bids

    ...forth at varying user input determined time intervals using either an IP65/66 stepper or industrial servo. The electronic drive module design needs to be based on the Arduino shield (modular connection) system with robust arduino programming, have an IP65/66 touch screen UI (with simple time period set, run and stop modes) be able to operate on 24v and

    $733 (Avg Bid)
    $733 Avg Bid
    27 bids

    We have Xamarin Forms project which works fin...project which works fine and now we would like to add printing feature to it. - The task is to build printing feature which could print text to thermal printers by both USB and Ethernet. - The work should be done by Xamarin Forms(Android Only). - The work should be able to be integrated with our project.

    $176 (Avg Bid)
    $176 Avg Bid
    11 bids

    This is a simple job for the right person. It requires changing a simple sketch from ethernet to wifi. I can get it working with an arduino with an ethernet sheild on it, but I now need it to work with an ESP8266 for wifi compatibility. Developer who wins the job must be skilled, prompt with completion and have great feedback at a reasonable bid.

    $144 (Avg Bid)
    $144 Avg Bid
    10 bids

    ...Note : i chose SD card reader because it seems to be the simplest after research, but it can be any type of device that windows got build-in drivers for : vga graphic card, Ethernet controller, usb controller, audio card, anything. Yet again I don’t need the card to actually works for that usage, just the fact I plug the pcie card and windows install

    $429 (Avg Bid)
    $429 Avg Bid
    3 bids

    It is a food restro which become online after some time so we want a logo Which have a chef face with fork and spoon and a shield which contain name "sbliya"

    $15 (Avg Bid)
    $15 Avg Bid
    23 bids