Servo motor interfacing with raspberry pi jobs

RPM Performance specializes in Data Acquisition and control in Drag Racing applications. This new project, based on the raspberry Pi, is for real time monitoring, closed loop control and acquisition on 1000+ Horsepower race cars. Will employ touchscreen display for setup, programming and graphic presentation of acquired data. Up to 5 input sensor channels, processed real time to control a combi...

I have already started it and don't have enough time to complete it includes Dht11 sensor, keypad, lcd, MQ 2 smoke sensor, raspberry pi 3 a+ microcontroller and the programming is done in python

We are currently building a tablet prototype that needs software development. The tablet is going to be heavily dependent on viewing photos and videos. It will require experience using image viewing applications on a Raspberry Pi such as Feh, Pi3D, Framen or other.

The skills required for this project are a good knowledge of C programming, modbus RTU, MQTT, AT commands and Atmel microcontrollers. The hardware is based on an ATXmega(-A4-128) and a Quectel BG95 (or BG96) witch has a built-in MQTT protocol stack. The board will be a modbus RTU slave device with some registers witch are synchronised with the corresponding MQTT variable. The BG95 has a built in G...

Need to create a home automation system with ai skills.

Should have rich experience working with IOT and mainly raspberry pi, arduino, node mcu, home automation...etc

This is a mechanical and design task, it may require special skills in mechanics, math and thermodynamics. What have to be done: 1. Create design of the product and get an acceptance. 2. Create a prototype device after the design acceptance. Device Description: - The device will be used for tests and will not be used by public users we may produce more for tests. The device and its design are th...

If you read this project please comment with "i read your raspberry project". i want to control and open lockers with nfc card 13,56MHz for this project we will use 1 x raspberry pi 3 1 x 16 relay board 1 x pn532 nfc reader (used libnfc) 1 x lcd 16 x nfc card with different serial ------ we will need a program a mysql database ------ data base will contain: name, in location, card, l...

My project is to have automatic watering when our land is dry and when the ground gets wet, the automatic water motor is off.

I will attempt some of these problems during the week, and I will most likely finish the remainder over the weekend. I think I might have the right equations, charts, and literature to figure out these questions; there are inconsistencies in how the equations that I found in the literature (that I found online) are labeled that are making me nervous. These questions shouldn’t pose a problem...

Current device that I own that logs data continuously on power up to SD Card when inserted. The file format is csv. What I want to do is: Switching SD Card out to Toshiba SD Wifi Card and need to use project like: [login to view URL] which will allow the card to be accessed as a network drive by a raspberry pi device. with the raspberry pi device I would like to run something like syncthing [l...

Sensor ,stepper motor ,video and Relay control connected to Raspberry Pi control by web app

We are developing a facial recognition product and we're looking for a hardware developer to specify, or design the hardware, firmware and codec we'll need to supply day and night vision video, streaming video, streaming 2-way audio, and single images (photos). There will also be a second camera that needs to be able to upload single images to the server. The hardware will need to commun...

Improve circuit and control system for reliability and durability. The components might need upgrading but keeping price reasonable. Unit operates 12 volt DC motor using 12 Volt battery. Box uses remote control and manual switch to vary speed of motor. (1) Currently using remote control and controller 12V-30V 24V 200W DC Wireless Remote Motor Speed Controller Adjustable Reversible Control Switch ...

PID Controller tuning in MATLAB and Simulink, for DC Motor control

Build Tesla LPR Scanner (Plans included) The Surveillance Detection Scout prototype, whose software Kain has made available on Github, works by capturing and analyzing the video from a Tesla's three cameras—two on its sideview mirrors and one forward-facing—on a $700 Nvidia Jetson Xavier mini-computer. It uses an open source neural network framework called Darknet as its machine ...

make a raspberry pi 3 run a tkinter program on boot, i've tried crontab with no luck

A customer of ours are to launch a vegan protein mix of pea protein, pumpkin protein and sunflower protein. The flavors will be - Berry (blackcurrant, blueberry, raspberry) and Chocolate (chocolate) The protein will be sweetened with Stevia. One serving will have 20 grams of protein - and - 2 grams of carbohydrates. It is 100 percent vegan. Here are a few examples: It would be cool to ...

Starter COmpany for Rasparry PI projects for school education. The required Features: - Stream a video or show an image to a TV connected to Raspberry PI HDMI port - The image/Video is hosted inside the raspberry PI - Code need to be written in Python - Use latest Python veriosn The coder need to advice the following: - Define the OS to use and list of libraries required to run his code - Loca...

Need content around 300 to 400 words based on "SAP Integration", for our website service pages and product pages. Looking for freelance content writer having a sound industry/domain experience and SAP relevant experience with 3+ years. Experience should be in End-to-end Implementation, Rollout, Support, upgrade, enhancements in the below areas. - Has to be more Integration specific, also...

I need Program a binary clock in ARM assembly language that uses LEDS to indicate the time, on Raspberry Pi. I will provide complete details in chat.

i am running a raspberry pi. I have a python script that is not working, and i need to know the reason. files are included. The script called '[login to view URL]' calls 2 other files located in the same directory to run one after the next. the file '[login to view URL]' works fine, yet the file [login to view URL]; does not run when controller is run and calls it. the file [lo...

We are looking for a candidate that knows LabView or Keysight VEE intimately. We have existing programs that require debugging and enhancements troubleshot over AnyDesk using live equipment. Candidate needs to be very familiar with test and measurement equipment, test uncertainty ratios, drivers, excel spreadsheets, complex equations and GPIB interfacing. We will also require the engineer to val...

Vehicle counting and classification project written in C++ or C# using OpenCV, Visual Studio 2017, Windows 10. The problem is to count and classify vehicles inside a predefined area and multi lanes. Classification shall consist of large vehicles (trucks, buses, etc.) and small vehicles (cars, Pickup trucks, motorcycles, minibus, etc.) only. Counting shall consider that the vehicles might be at zer...

desing motor

desing motor

create a Python/QT-based system that will work on a Raspberry Pi

We are looking for a solution on base Raspberry Pi with a Linux operating system. The purpose of the Raspberry Pi to connect to the Android device WiFi and allow to send ADB shell command automatically according to what I would define.

Responsibilities and Activities: Build and lead a full stack development team inside our Hostel Supply division to take Hostelworld to the next level Leverage your experience and leadership to transform existing functions to drive consistency and efficiency through your strategies and management Lead the execution for all things related to our supply platforms including our processes, develop...

Synchronize audio output and servo motor [login to view URL] this link for more insights [login to view URL] Feel free to contact at any time. 9739912260

i have stepper motor and i have arduino and lcd panel with keys i want to control the steopper motor 1. travel 2. speed 3. acceleration from keypad.. thats all

Looking for a creative person interested in creating a series of DMX lighting effects for our motor racing track - we have a series of lights including Moving Lights, Pars, Blinders and Special effects including CO2 Canons and Flame throwers We are looking to create a series of sequences we can use each week to introduce drivers, celebrate there wins and open and close the show with. A competen...

Please Sign Up or Login to see details.

Raspberry Pi to display an image based upon variables received from incoming TCP commands. Also to host a Wifi network.

Re-Design User Interface of a Seed counter using a Raspberry Pi computer board. The software uses a LINUX operating system. Periphial Hardware is a 7" Raspberry Pi 7" Touch Screen display, counting module, motor controller. Software part: QT, Microsoft visual studio 2017, Netbeans IDE, for Netbeans

Passive IMSI number and Lat Long data to be captured and transverse to an static IP at a central SQL DB in our data center in South Africa. A web interface will be build to lookup a mobile number via a login and password per user on a Google map. We will be using 4 SDR Radios, one for each network. We will NOT be using Raspberry Pi we will be using A NUK PC with Ubuntu 18.04 installed and wire sh...

The CNN Money’s Market Movers website ([login to view URL] ) tracks the most active stocks on a real time basis. Specifically, the most active, the top gainers and top losers are listed at any instance in time. You will first write Python scripts that collect the list of most actives, gainers and losers from the above website. Next, your programs should take the ticker symbols and names of t...

So i have a program right now that uses tensorflow on a raspberry Pi 4. I have everything setup and working however it thinks that my cat is a dog. I have 50 pictures of my cat that i would like to load into tensorflow to hopefully help tensorflow better detect my cat however im having difficulty figuring this part out.

Copy an Sd card to a portable SSD drive. Create new directory on ssd and copy total contents of SD card to ssd portable drive. If card is re inserted make a new directory and copy contents. Visual Confirmation that project is complete and contents verified. Later upgrades include loading to a cloud and small screen for verification.

GSM based motor ON/Off and Water management system.

I have basically two issues that i am running into the first is starting at line 38. What im trying to do is use a button to that will basically run a stepper motor and write override enabled on the screen and continue to only check that section of the code until the button is pressed again which would then allow the rest of the code to continue. The second issue is with the twillio intergration ...

Looking for an absolute LoRaWAN expert to consult and to support ongoing technology development. Arduino, Raspberry experience does not count. A thorough familiarity with 1.0.3b is.

I need to design an air curtain for heat insulation. I need calculations of hydraulic power, motor power, rotation speed, electric power required, flow velocity and rate. The room size LxWxH=21×12×6 meters. Door size HxW=2x1.

Hello, We need swing tags and a candle box designed up for our candles. I need modern, creative designs. (please see examples for inspiration). Please use clean fonts. My favorite style so far is the image I have attached named main inspiration. For the swing tags, I want them to be double-sided, with an image of a scetch on the back (refer to image attached). I also want to say Thank yo...

Application Requirements: * GTK-based GUI app that can run on Raspberry-Pi (model 3b+) * Should display 8 buttons as shown in the attached image - one should open a camera-window, one will open an empty screen, rest of buttons should do nothing * Camera window should be able to display a standard (Logitech USB) camera input * I need only boilerplate code to get up and running with it as quickl...

create tables and queries and a bit ER diagram related work.

so i have a raspberry pi 0w and 4G modem ZTE MF910 using squid proxy having success working on local network but cant get it to work on external , i have tried with my adsl and it works fine so its my isp...is there any way to forward the port using another router ? i do have a dlink dsl 124 i think that my isp uses carrier grade nat , found this on the net and i barley understand this meaning c...

I need the FOPD model that I have already created in HYSYS to be converted to Simulink for the Benzene and Toluene Splitter. I also need the deviations from the set point in terms of ITAE quantified, and proper controller configurations (P, PI, or PID) implemented in Simulink. An example is shown in this document of what is needed. I highlighted everything in yellow pertaining to what I need accom...

We are looking to control servo (With Brake) and stepper motor (with Brake) through the drivers. We are planning to use Modbus. Driver data sheet attached. Requirements: Screen will have the following buttons: Servo 1 : ON/OFF, Number of Rotations, Speed, Direction, Brake/Release Servo 2 : ON/OFF, Number of Rotations, Speed, Direction, Brake/Release Servo 3 : ON/OFF, Number of Rotations, Speed,...

Problem programming the code of the project Python programming This is the project link [login to view URL]