Small project using gsm modem jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    9,875 small project using gsm modem jobs found, pricing in USD

    We have updated our website, but at our home, the same old website is being loaded. We have done everything, like clearing Mac cache, deleting all files. Then resetting the modem, but still not able to access the new version of the website.

    $12 / hr (Avg Bid)
    $12 / hr Avg Bid
    11 bids

    i need code that switches over tracking services...if gps shield does not have service use gsm sim longitude and latitude to update tracking...to MySQL database

    $5 / hr (Avg Bid)
    $5 / hr Avg Bid
    8 bids

    ...Cable Modem; how can I find out, from a computer on my home LAN if my Web Facing IP address changes? The goal is to be able to find out at command line what address the cable modem is using; so I can have a script that will update DNS and keep all good? Just need the one or two commands that need to make this. See the picture of the Cable Modem webpage

    $11 (Avg Bid)
    $11 Avg Bid
    3 bids
    IOT development 5 days left

    Must be proficient in EE and software development. I am looking for someone to build a concept within the IOT space. This will be utilized to monitor d...someone to build a concept within the IOT space. This will be utilized to monitor different devices within the healthcare industry. I am look to have an adhesive translucent GSM based module built

    $1237 (Avg Bid)
    $1237 Avg Bid
    35 bids

    ...reports and write project for their viva dissertation. Culture and heritage preservation. Education, vocational training documents and education. Trade and Handicrafts Association consulting for developing works. Planning the development of the activity under consideration. The determination of objectives and programs of action for project leading by civil

    $552 (Avg Bid)
    $552 Avg Bid
    14 bids

    ...experience with serial port settings, serial communication. I want to use Neoway M590E GSM/GPRS modem with USB-UART serial converter, looks like everything okay, but I can't communicate with the modem over terminal. I already tested the communication with the modem under Windows, everything fine, working. You need to check over teamviewer while the computer

    $17 (Avg Bid)
    $17 Avg Bid
    7 bids

    ...The hardware includes Raspberry Pi 3, GPS module, 3G/4G USB modem and RPI camera. RPI soft counts incoming and out coming people under the camera, the counter have to determine people who go close to each other (without distance). It is going to work like a head counter. Parts of project: 1) People counting (recording statistic data with time and

    $808 (Avg Bid)
    $808 Avg Bid
    15 bids

    I want to use raspi as gsm gateway. This is the basic task. Details will be explained.

    $538 (Avg Bid)
    $538 Avg Bid
    7 bids

    It is a module that have to comand a relay to switch on/off 220Vac (80A) by GSM.-

    $2015 (Avg Bid)
    $2015 Avg Bid
    36 bids

    Mobile GSM servis, specialized in apple products

    $30 (Avg Bid)
    $30 Avg Bid
    36 bids

    I need to read the serial communications from a GPS NEO 6M card on a Arduino GSM 1400. GSM 1400 cannot use SoftwareSerial so you would need another method. Project will be an .ino Arduino file.

    $143 (Avg Bid)
    $143 Avg Bid
    7 bids

    I want someone to wrote me a detailed Paper explaining LORAWAN, SIGFOX and NBIOT and the role they play in current IOT market. Differences between GSM and GPS trackers also must be included in this.

    $28 (Avg Bid)
    $28 Avg Bid
    13 bids

    ...211 Also we have 10 3G/4G modems connected to Server: 3GModem0 3GModem1 3GModem2 3GModem3 3GModem4 3GModem5 3GModem6 3GModem7 3GModem8 3GModem9 Each modem should be used as Proxy server: Modem | Connection String | Authentification 3GModem0 | [login to view URL] | user/password 3GModem1 | [login to view URL] |

    $190 (Avg Bid)
    $190 Avg Bid
    5 bids

    ...simple PoC code that: + Communicate with a modem using AT Commands over the USART2 line. (I have few libraries ready that i found specifically for BC95 - I just need to get them working) Attaching nb-iot network, check connection, check signal, send data over CoAP/UDP The MCU is specifically: STM32L0-line Modem is : Quectel BC95-B20 I need an only simple

    $30 (Avg Bid)
    $30 Avg Bid
    1 bids

    I have installed Dinstar GSM gateway, but I have voice quality problem. Who can solve it, please contact with me

    $34 (Avg Bid)
    $34 Avg Bid
    10 bids

    Looking for an arduino expert,who can design a wearable wrist smart band with multiple features , features are 2.5 inches screen , gsm anteena, temperature sensor, multiple microcontroller and sensors will work simultaneously. then create API of the product that will be interact with smartphone application and web services Also required design

    $110 (Avg Bid)
    $110 Avg Bid
    3 bids

    I want to interface SIM800/SIM900 or Telit GL865 to LPC2148. There is one 125kHz RFID connected to LPC2148 also. I want to upload RFID Card ID to a webserver using GSM/GPRS module. I need a FreeRTOS application for this task, which can scan RFID and upload card ID simultaneously. Card wil be scanned very fast like 70-80 cards per minute.

    $303 (Avg Bid)
    $303 Avg Bid
    11 bids

    1. I am planning to design a gps tracker pcb which has gps and gsm modem with a stm32 micro. I have some work already done in orcad 16.5. Can you complete that project? 2. which country/ timezone you operate from? 3. are you alone or work in teams?? 4. do you design hardware based on requirement? 5. Will you be able to support in antenna design and

    $15 / hr (Avg Bid)
    $15 / hr Avg Bid
    1 bids

    1. I am planning to design a gps tracker pcb which has gps and gsm modem with a stm32 micro. I have some work already done in orcad 16.5. Can you complete that project? 2. which country/ timezone you operate from? 3. are you alone or work in teams?? 4. do you design hardware based on requirement? 5. Will you be able to support in antenna design and

    $14 / hr (Avg Bid)
    $14 / hr Avg Bid
    1 bids

    1. I am planning to design a gps tracker pcb which has gps and gsm modem with a stm32 micro. I have some work already done in orcad 16.5. Can you complete that project? 2. which country/ timezone you operate from? 3. are you alone or work in teams?? 4. do you design hardware based on requirement? 5. Will you be able to support in antenna design and

    $14 / hr (Avg Bid)
    $14 / hr Avg Bid
    1 bids

    1. I am planning to design a gps tracker pcb which has gps and gsm modem with a stm32 micro. I have some work already done in orcad 16.5. Can you complete that project? 2. which country/ timezone you operate from? 3. are you alone or work in teams?? 4. do you design hardware based on requirement? 5. Will you be able to support in antenna design and

    $14 / hr (Avg Bid)
    $14 / hr Avg Bid
    1 bids

    we are looking for en expert to develop a app that will act as sip gsm gateway i am including here a [login to view URL] to a software that was develop for window [login to view URL] 2, the actual software for window s i will drop it to you once we hire you 3. a suggestion

    $462 (Avg Bid)
    $462 Avg Bid
    3 bids

    We have landline free hand phone with internal sos alarm button working with contact id protocol and looking for design of gsm modul to convert the landline to gsm communication

    $2467 (Avg Bid)
    $2467 Avg Bid
    17 bids

    Looking for system administrator who have experience in linux with PURE SMS sending - receiving use USB GPRS modem. Need to properly attach GPRS modem uver USB port to ttyUSB0 and send SMS message with AT commands, also receive response from modem.

    $133 (Avg Bid)
    $133 Avg Bid
    10 bids

    We are looking to skillful guys to Configure 3 SPA3000 devices & 1 GSM gateway with xCALLY contact cloud center (Asterisk base call center system). The job will be mainly sitting the devices to be connected with xCALLY systems using the sitting parameter of xCALLY GUI. * the xCALLY is hosted in VPS @ germany. * The VPS @ germany is connected to NordVPN

    $194 (Avg Bid)
    $194 Avg Bid
    2 bids

    i want to setup an gsm voip gateway GUI using asterisk+a2b+chan dongle, use huawei e173u-1 and e153u-1. i already have a running server, but i want to setup a new server with the following features in a GUI: 1-sim card suspension detection based consecutive unsuccessful number of calls and discard(dongle stop now) the suspended ones as well as not

    $719 (Avg Bid)
    $719 Avg Bid
    6 bids

    1. Dont worry about the offer price, quote yours. 2. how much you would charge for a gps tracker pcb with stm32 and sim808 module. couple of analogs, 4 di...2. how much you would charge for a gps tracker pcb with stm32 and sim808 module. couple of analogs, 4 digital ins, 1 CAN, and 1 rs232, 12v to 4v dcdc converter and on Board gsm antenna? Read Less

    $8 (Avg Bid)
    $8 Avg Bid
    1 bids

    1. Dont worry about the offer price, quote yours. 2. how much you would charge for a gps tracker pcb with stm32 and sim808 module. couple of analogs, 4 di...2. how much you would charge for a gps tracker pcb with stm32 and sim808 module. couple of analogs, 4 digital ins, 1 CAN, and 1 rs232, 12v to 4v dcdc converter and on Board gsm antenna? Read Less

    $9 / hr (Avg Bid)
    $9 / hr Avg Bid
    1 bids

    I'm looking for someone to write me an A+ proposal on the apple cash register system(POS) and how it will benefit small businesses, retail companies, resturant sand all businesses using cash registers. And also add the Apple Pay modem of Payment,

    $68 (Avg Bid)
    $68 Avg Bid
    32 bids

    I want somewone to configure kannel to be able to send sms and to be able to bill custommers based on dlr. we use gsm pool with quectel M35

    $211 (Avg Bid)
    $211 Avg Bid
    4 bids

    ...printer, with the same status as above, found, connected, can't find etc. The reason I need this script is we have many employees working from remote offices which have a 4g modem and network printer, I have to remote in and help support all the time, so I need this tool that I can configure and send to users which will troubleshoot and connect automatically

    $408 (Avg Bid)
    $408 Avg Bid
    17 bids

    We have an arduino with a GSM Shield SIM900, which already sends SMS to a certain number which is specified in the program. We need to somehow send that SMS to a web server by using the SIM's 3G capability, and then process the data in order for it to be displayed graphically and be accesed by users with passwords.

    $246 (Avg Bid)
    $246 Avg Bid
    7 bids

    I need my gateway to be set up so that I can receive international voip traffic and forwarded using the simcards on the gateway. You set the route and Asterisk server on VPS. This should take just few minutes

    $38 (Avg Bid)
    $38 Avg Bid
    3 bids

    We are looking for a web based real time vehicle tracking software system to be used with generic and popular GPS/GSM/GPRS based tracking devices. We intend to have a GPS tracking/fleet management software for our vehicles. If you already have done much of the software is very helpful with the times. Application Requirements: (PHP, MySQL Server)

    $3030 (Avg Bid)
    $3030 Avg Bid
    56 bids

    Datalink International is seeking a skilled Android and iOS Application developer. Must have 5 + years of proven development skills. All Apps developed will link over GSM Cellular networks to existing GPS and SMS Host Software. Must be familiar with SIP and serial data connections

    $22 / hr (Avg Bid)
    $22 / hr Avg Bid
    29 bids

    He...) Via the GSM ( the SIM card which is installed in the phone ) In more details Now we have a mobile device and Asterisk server, I want to link the mobile to the server and this server will send the call (SIP) and the mobile will make this call via the SIM installed In a way or another this APP will make the mobile work as a VoIP to GSM gateway

    $215 (Avg Bid)
    $215 Avg Bid
    6 bids

    Hi, We are looking for Firmware developer for IOT product developer. Expertise with GSM/GPRS, WIFI, BLE/BT, GPS/GLNSS, HALL SENSORS, ACCELEROMETER/GRYOSCOPE and its use for GPS correction, Motion detection, Power management planning

    $1640 (Avg Bid)
    $1640 Avg Bid
    15 bids

    Project Description Vending Machine Telemetry project to extract machine data (MDB or DEX) - specifically vending machine selection and successful dispensing information (additional payment information will be good but not absolutely required), and upload them via GSM shield to a URL. Detailed schematics with arduino, GSM shield (or similar), hardware

    $325 (Avg Bid)
    $325 Avg Bid
    3 bids

    1. Dont worry about the offer price, quote yours. 2. how much you would charge for a gps tracker pcb with stm32 and sim808 module. couple of analogs, 4 digital ins,...2. how much you would charge for a gps tracker pcb with stm32 and sim808 module. couple of analogs, 4 digital ins, 1 CAN, and 1 rs232, 12v to 4v dcdc converter and on Board gsm antenna?

    $81 (Avg Bid)
    $81 Avg Bid
    1 bids

    ...is a computer and a GSM transmitter-receiver. The communication between the smartphone and the house is made via this GSM which sends and receives SMS. The computer questions peripherals, and sends back the desired data. The smartphone read SMS and shows datas. If there is an alert in the house, the computer send an SMS via the GSM. The application make

    $669 (Avg Bid)
    $669 Avg Bid
    42 bids

    i am trying to use the Arduino to post i have 3 sim800L shields my project was working before but for some reason it does not want to post any more i keep getting errors when i try to connect so i would like to write a new code i just want to post the following 2 variables username and password to a php file...and on that php file i will send to my

    $31 (Avg Bid)
    $31 Avg Bid
    9 bids

    ...technical advice and guidance via telephone or email from technical product specialist(s) who will: o Troubleshoot network problems, via phone, virtual private network, or modem connection, down to Maintained Product Component level, or sufficiently to exclude Maintained Products as the root cause. o For ARs of Severity Level 1 (Critical) and Severity

    $42 / hr (Avg Bid)
    $42 / hr Avg Bid
    7 bids

    1)i want to build a arduino nano project, which connect with camera and gsm module. SIM card will be plugged and use in this project. 2)I want if i ring the phone number of this SIM card, the phone will be cutted off and the camera will capture a photo and send this photo through mms to the number that i ring. But only three phone number can be recognized

    $35 (Avg Bid)
    $35 Avg Bid
    1 bids

    For SIM 800C module, we'd like to have functionalities described in the document.

    $204 (Avg Bid)
    $204 Avg Bid
    3 bids

    ...setup network. If even mesh base is acceptable if it's easy to implement and cost effective and also please don't come up with available gps and GSM based tracker. Even if you are having solution using gps and GSM that meets our requirements then it's acceptable The developed device should be cost effective. If already available device then we can discuss

    $6339 (Avg Bid)
    $6339 Avg Bid
    9 bids

    I need a C language programmer to customize Asterisk Open Source to adapt to an owned security solution by driving communications flow from a GSM gateway.

    $264 (Avg Bid)
    $264 Avg Bid
    8 bids

    ...product that needs to be ported from a Tiva MCU to an ESP32. All current code is written in c. We currently have code written for TM4C1294NCPDT on a custom board with 2G modem. However, now I want to use an inexpensive ESP32 board with external SD card and external Xbee LTE M Module. STEP 1: Connect to WIFI SD card and copy pictures over to board

    $1518 (Avg Bid)
    $1518 Avg Bid
    20 bids

    Via its smartphone a user questions the accessories which are in its house. In the house there is a computer and a receiver GSM. The communication between the smartphone and the house is made via this GSM which sends and receives SMS. The computer questions peripherals, and sends back the desired data. The smartphone read SMS and shows datas

    $13 / hr (Avg Bid)
    $13 / hr Avg Bid
    31 bids

    ...4-20 ma) 8. Logging of above 9. GSM function to send log file by e-mail with all data above in file 10. Touchscreen control and TF screen for below 11. Graphing of pressure vs time displayed on screen as well as flow rates and totaliser (can switch between functions if easier or display all as one) 12. Possibility of GSM control relay (utter wish list)

    $1618 (Avg Bid)
    $1618 Avg Bid
    42 bids

    ...4-20 ma) 8. Logging of above 9. GSM function to send log file by e-mail with all data above in file 10. Touchscreen control and TF screen for below 11. Graphing of pressure vs time displayed on screen as well as flow rates and totaliser (can switch between functions if easier or display all as one) 12. Possibility of GSM control relay (utter wish list)

    $1646 (Avg Bid)
    $1646 Avg Bid
    18 bids