Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    3,052 stairs jobs found, pricing in USD

    It is a 5-...The shop's consumer unit will remain in the cellar. 2. Top 3 Floors (Flats): - Each flat will have its own separate consumer unit. - The communal area and all stairs will have their own consumer box. 3. Communal Area (First Floor): - The consumer unit for the communal area, including the kitchen and WC, will be located in the kitchen. Additional Requirements: - Electric meters are installed in the basement. Wires need to be routed from the basement to the consumer units for the flats. - Two functioning electric meters are available: 1. One meter allocated for the shop and communal areas such as stairs, kitchen, and WC on the first floor. 2. One meter for the three flats. - Additionally, each of the three flats will require t...

    $718 (Avg Bid)
    $718 Avg Bid
    5 bids

    - Old model adaptation: 70 USD - Render shots 20 each render: x 10 = 200 USD Total : 270 USD

    $270 (Avg Bid)
    $270 Avg Bid
    1 bids

    ...kitchen (the kitchen area is marked in yellow) and the social area (living room and dining room). I am considering knocking down the wall (pink color). The small terrace (green color) could be a zen garden, but with the possibility of occasionally putting a set of 1 table and 2 chairs like Balcon Arezzo (see attached image with green dot). It is intended to remodel the half bathroom under the stairs, and the guest room has a space occupied by a rectangle; I'm unsure whether to remove it or keep it (see image located in the living room). The service yard (red color) could be a small garden, but at the back is the laundry center, where the washing machine, water heater, and laundry sink are located. Second Floor The master bedroom has a small balcony, and the space could be ...

    $110 (Avg Bid)
    Guaranteed
    $110
    3 entries

    ...combined with a thoughtful approach to space management within the context of studio apartment living, will be paramount in this project. The task: Initial plan would be to have two 49m2 houses near the road and stairs up towards the main buildings up the slope (see pdf). The attached picture is just a suggestion and the houses should in the long term act as guest house for the main buildings up the slope for two families. (Find attached a photo of 50m2 house that could be available.) I am looking for just a general layout, location in the slope and also direction and example of stairs. Below the houses would be parking and a car port and parking space for two cars. Formats delivered: Could be possible to deliver dwg maps, 3D DWG or IFC models, and/or Sketch up 3d model...

    $57 (Avg Bid)
    $57 Avg Bid
    11 bids
    Industrial Combo Space Design 5 days left
    VERIFIED

    ...accommodate, and will be buying a washer and dryer for inside the bath room. We would like to not block the shop door, so we can pull our RV into the shop, and still use all rooms. We want the kitchenette to be as functional as possible, with all the things a modern kitchen would have, fridge, stove, dishwasher, sink, microwave, air fryer, etc. We would like the loft area to have a ladder, or stairs that again, does not block the entry via main shop doors, but allows for a small bed, and computer desk and chair. There is a J box with 100 amps of power, so we will need a place for a sub panel for the room. There is a gas line there as well, and sewer and water are in the ground just on the other side of the shorter wall, so we will have to cut the concrete to install drains. W...

    $34 / hr (Avg Bid)
    $34 / hr Avg Bid
    11 bids

    I’m in need of an expert draftsperson, well-versed in AutoCAD, to create a submission drawing for a residential building. This drawing will serve a critical role in the building permit application process. I will Provide A Plan and Basic Elevation of a house (DWG file - 2007 Cad) With this Plan, You have to prepare Sectional Elevation going through Stairs & Toilet. Also Submission drawing sheet (Plans, Elevation, Section, Site Plan, Schedule of Opening, Area Key plan, Area Statement Etc.) with proper layers. I will provide a Sample Sheet.

    $28 (Avg Bid)
    $28 Avg Bid
    17 bids

    A start-up specializing in the rental of stairclimbers for residential and commercial use, to make moving equipment and appliances up and down stairs an easy and efficient process. Target: professional movers who require stairclimbers for lifting heavy objects on stairs, homeowners, construction companies, DIY-enthusiasts looking for mechanised aid moving heavy objects, property management companies, electronics stores for delivery-to-the-home orders. Starting from the company name "CityLift", the logo should be: - grunge fonts (very important); - timeless, simple, with a high recognition factor for the public; - a stylized hand truck, which can, at your discretion, be part of the logo letters, can carry them or can be integrated at the beginning or end of the l...

    $315 (Avg Bid)
    Featured Guaranteed Top Contest
    $315
    950 entries

    I am searching for an indoor space to host a popup event that will la...met. REQUIREMENTS: - Transport Box Deliverey Available DIMENTIONS: 1‘760 x 926 x 1‘536 / 5'.77 feet long x 3.4 feet wide and 5'4 feet high This is a big heavy box but if the location we pick can have it delivered to a dock we can unpack at the dock have then store the crate and we can push the SEAMTEK into the room as it is on wheels. We cannot move the unit in a small elevator or up or down stairs. -22V Power Source This machine runs off of 220V power so we will need to have access to that power to run the machine. -Space Time We are looking for a space for 2 days in a row, mid-week, from 10am-3pm -Parking We need help finding this location and that's about it. Thank you &...

    $8 - $15 / hr
    $8 - $15 / hr
    0 bids

    Hi everyone, i'm looking for some ideas ? for my backyard. The house is 10.4 meters wide so we have backyard 10.4m width and also approximately 10 m depth..100qm. Also pretty important,we are 90 cm high from the ground . In the left side of the house I have planned a 6m wide and 3,5m depth Aluminium terrace glass roof,Alu colour...house is 10.4 meters wide so we have backyard 10.4m width and also approximately 10 m depth..100qm. Also pretty important,we are 90 cm high from the ground . In the left side of the house I have planned a 6m wide and 3,5m depth Aluminium terrace glass roof,Alu colour antracite. A hot tub/ spa for exterior in let's say 2m x 2m would also be a cool feature . I' m open to more ideas like,stairs,waterfall ( mini),stairs,i dont know.. I&#...

    $54 (Avg Bid)
    Guaranteed
    $54
    55 entries

    ...inspiration, with an ability to transform my property into a classy, elegant space using either suitable or neutral color palettes. The idea is to rearrange the ground floor... as i imagined it i want to turn bedroom into heating system room and storage room, living room turn into bedroom, entrance/kitchen remove and make stairs from the first floor, bathroom stays as it is. 1st floor should be a beautiful living room with kitchen with big windows/slide doors and stairs to attic as well. Attic should be a romantic bedroom with nice windows solutions for a nice winter view. I hope i am thinking right, if you think there is a better solution i would like to hear about it. In attachment is the approximate plan of the house and photo from the front. Key Tasks: - Re-plan...

    $217 (Avg Bid)
    $217
    21 entries

    This project is all about translating the current architecture of a small, soon-to-be-demolished house into a fresh, modern...but I would prefer if it doesn't. We can put a larger beam to create opening if needed. I would like one toilet upstairs and two bedroom. At the moment there is not enough height at the ends but we can increase that as we will go for planning permission. Everything inside will be new , including new roof. Downstairs I would like to have sitting room, kitchen, dining room and small toilet under stairs. The staircase can be moved where it suits us. For the contest I need just a 2d design with furniture in place. Whoever submits the design I like the most will be the winner and will be expected to submit also the facade drawings(2 sides) and cross section a...

    $87 (Avg Bid)
    Guaranteed
    $87
    32 entries

    ...Design the Front of the House Entryway, Garage and parking lot. New Garage approximately 2,5 meter in height The measures and the placement are fix. The elevation of the house and garage is approximately 30 cm Part 2: Design the Terrace (on top of the garage) and it stairs. You are free to design a sitting area with barbecue area or small garden like shown in one of sample pictures. On the side to the neighbour there has to be a wall. The measures and the placement of the terrace are fix. The measures and the placement of the stairs are flexible as shown in the floor plan. Part 3 is OPTIONAL: Design a swimming pool and its surroundings (Pergola, garden plants ...). The measures of the swimming pool are flexible as shown in the floor plan. You can provide us ideas and ins...

    $120 (Avg Bid)
    Guaranteed
    $120
    13 entries

    I'm looking for a talented and imaginative individual to create a symbolic representation of a 'stairway to heaven', with my daughter being a focal point on the stairs. This project is of high significance and needs to be completed as quickly as possible so a flair for meeting deadlines is crucial. As I haven't mentioned any particular elements to be included, creativity and a keen eye for aesthetics are highly appreciated in this project. A background in classical, modern, and especially symbolic art would be beneficial. - Fast completion: This project calls for someone who can produce quality work in a short time frame. - Excellent artistic judgment: The symbolism must be coherent and striking. - Strong visual communication: The story should be clear...

    $94 (Avg Bid)
    $94 Avg Bid
    43 bids

    ...furnish the Air-conditions distribution plan and drainage system separately for the residential area's - Ability to project and furnish the waterpipes foundation for toilet floor and kitchen sink drainage system on a separately plan 2D and 3D This project is a residential Flat for large family, the flat is connected to upper roof throughout an internal stairs in the corridor at the entry flat door and exterior stairs as well, only the interior stairs needs designed. (this style called penthouse flat). this penthouse needs to be designed in a 2D and 3D project in metric and CM only, and it will be handed over to a specialized engineer to work fiscally on the project as per your instruction and correct project measure. you may remove one of the unnecessary wall...

    $373 (Avg Bid)
    Urgent NDA
    $373 Avg Bid
    12 bids

    I am looking for an experienced 3D modeler to help me visualize my ideal patio layout of ...more than 75m². The patio has a unique, irregular shape, so I am expecting that it needs careful calculation for tile fitting as well as rain drainage design. In the 3D visualization, I would like you to experiment with different examples of stairs and ceramic tile patterns (80x80 cm or 100x100 cm) so I can better assess the overall aesthetic. Key requirements: - Experience in 3D modeling, particularly with patios or outdoor spaces - A good understanding of tile fitting and drainage design - Ability to create models with different tile patterns and stairs Please include examples of your previous work on similar projects in your bid, so I can see if your style fits my vision for...

    $41 (Avg Bid)
    $41 Avg Bid
    25 bids

    ...will be no car parking on the top floor, however service vehicles and ambulances will need access. Helicopters/airtaxis will land on one of the four open grates that sit atop the car ramps and then they will be moved by ground crews to helicopter parking spaces on the top level until it is their turn to depart. The top floor needs to be marked with helicopter/VTOL parking spaces. Elevators and stairs need to be close to the landing grates so that customers do not have far to walk once they are able to disembarking the aircraft. The car ramps need to have a large enough inner diameter for the aircraft to land safely on the open grate that they support. The chimney must pass through the center of each floor but otherwise all the lower floors will look like typical floors of a parki...

    $383 (Avg Bid)
    $383 Avg Bid
    49 bids

    Realistic 3D stairs modelling and placing it in realistic 3D interior.

    $207 (Avg Bid)
    $207 Avg Bid
    1 bids

    ...this project 2320. Once the job is assigned, further details, architectural drawings + structural drawings will be provided to assist. Payments will be processed over 7 milestones with a submission and review at each stage: Milestone 1 – 33% of all 4x sections, + 66% of plans (drawings highlighted in pink) Milestone 2 – 75% of sections + 75% of elevations to reflect updated sections + 50% of stairs (drawings highlighted in orange) Milestone 3 – 75% roof, planters + balcony details, 75% of walls + brick screen details Milestone 4 – 75% of wet area layouts, 75% of window + shutter schedules (drawings highlighted in purple) Milestone 5 – 75% of RCP and electrical (drawings highlighted in blue) Milestone 6 – 75% - internal + external miscellaneou...

    $2308 (Avg Bid)
    $2308 Avg Bid
    45 bids

    ...steps by 5 degrees counter clockwise". Or "move the whole staircase closer to the north wall", or "make that landing a little more triangular", or "recess the balustrade into the wall", etc., etc. Note that someone has already tried to do this for me, but it was difficult to get it looking nice and smooth using Revit, Sketchup and 3DS Max. For example, the balustrades and the underside of the stairs looked rough. So I couldn't imagine what it will look like in reality nor what the builder will actually build. So maybe we need to use a different type of 3D software that is more suitable for this type of detailed, smooth, granular design? (and which can export a 3D DWG file to be imported into the Revit model of the house). Thank you......

    $13 - $46 / hr
    Sealed
    $13 - $46 / hr
    19 bids

    ...Fisher Paykel appliances. You will find a spacious front paver patio for gathering with the friendly neighbors, and a large screened porch off the back of the home. The porch features comfortable furniture, and outdoor tv/cable, surround sound, and security back patio has a gas grill connect and additional lighting. Also on this level you will find a charming powder room. Ascend the stairs and you'll find a shiplapped feature wall. On this level there is the large primary bedroom complete with shiplapped feature wall and ensuite bathroom and custom closet. Down the hall you'll find a laundry room with LG high efficiency washer/dryer. You'll find two more spacious bedrooms and a private 1/2 bath connected to each bedroom and a shared tub/shower area. There are so m...

    $103 (Avg Bid)
    $103 Avg Bid
    18 bids

    I'm seeking an expert in deck design to create a blueprint for a second-story wooden deck. This is going to be a medium-sized deck, about 12ft by 16ft in dimension. Key deliverables: - Complete and detailed blueprint for a second-story deck. - Incorporation of railings and stairs into the design. Ideal candidate: - Must have experience in designing decks, particularly wooden ones. - Familiarity with local codes and permitting process will be a huge advantage. - Good aesthetic eye and attention to function and safety. I'm looking to get my project approved for permit so precision and accuracy are key.

    $383 (Avg Bid)
    $383 Avg Bid
    35 bids

    I'll need a 3D drawing using Tekla or Strucad or Auto Cad 3d. General requirements are as follows: I will attach a 2d Autocad drawing which will have all details and sizes. The customer can not understand the 2D drawing and has requested a 3D drawing. .

    $10 / hr (Avg Bid)
    $10 / hr Avg Bid
    18 bids

    Looking for an experienced HSBcad designer to create shop drawings for wall panels , floor/roof cassettes and stairs from the building plans. Being able to include the different (MEP) mechanical , plumbing, electrical runs is a plus! These drawings will be used for offsite manufactured buildings This project requires: - Understanding of HSBcad software - Experience with wood materials, specifically Dougfir timber, I-Joists, plywood ,trusses - blueprint reading - 3d modeling -clash detection Project specs -1050 sq foot residential house -5 different models Please include samples of previous jobs shop drawings for walls , floors, roofs and stairs

    $1848 (Avg Bid)
    $1848 Avg Bid
    22 bids

    ...incorporating minimalist elements that reflect a contemporary yet timeless appeal. - **Features to Include:** - **Large Windows:** To maximize natural light and ventilation while ensuring an inviting exterior. - **Rooftop Terrace:** A design that incorporates a functional and attractive rooftop terrace, blending it seamlessly with the overall aesthetic. - **Design for Lobby, Hallways, and Stairs:** Although the focus is on the building's exterior, I would also like concepts for these common areas to ensure a cohesive look inside and out. **Ideal Skills and Experience:** - Proven experience in modern architectural designs, especially with apartment buildings. - Strong portfolio showcasing expertise in using red bricks effectively within modern designs. - Skill in opt...

    $145 (Avg Bid)
    $145 Avg Bid
    53 bids

    I will deliver a model in SketchUp of the installation site (no machine drawing, just the shed) and I will include 3 stairs (two lateral and one transversal). If I receive the dimensions of the shed, I will be able to make the correct design, otherwise you will have to adjust the design.

    $30 / hr (Avg Bid)
    $30 / hr Avg Bid
    1 bids

    I am looking for an experienced interior designer specializing in modern decor to help give my staircase a fresh, new feel. Key elements of the project include: - Implementing a modern design aesthetic - Incorporating a neutral carpet on the stairs - Applying art features on the adjacent walls - Adding key lighting fixtures that complement the overall design. The ideal applicant will be well-versed in selecting and matching neutral colored materials, sourcing and arranging the perfect art pieces to add personality to the space, and understand the subtleties of lighting to accentuate features of the staircase. Experience in similar projects and a portfolio showcasing their modern design style will be a big plus. Attention to detail and the ability to work within a specified budget...

    $750 - $1500
    Sealed
    $750 - $1500
    44 bids

    My villa is under construction. I would like to have a layout for the outdoor area that consists of several items, I would like to have the layout in advance so I know where to place the base for each requirements. ...classic (almost matching to my villa style) - the outdoor shall consist of : A. 1100*500 cm room B. Setting area with barbecue C. Waterfall & ground water pool (not swimming pool) D. Garage for two cars E. Children playground (mega slides house & 4 swings) - the room shall have nice view of water & greens - I except that setting area also has nearby waterfall & water grounds - villa outdoor stairs length shall not have any items so the car can pass by - villa garden is approximately sized 2679*2164 cm **attachment upon request** - villa out...

    $433 (Avg Bid)
    $433 Avg Bid
    62 bids

    ...3. Right now there is no wash basin in lower floor near dining , forcing people to use powder room for washing hands 4. builder has provided point for washing machine in kitchen , which i dont like need alternate points 5. convert store room in lower basement to pooja room god idols will be placed on north side, 6. design of deck area 7. since stairs is steel one , and the back side of stairs is glass , how do we utilize this space under the stairs 8. planning to have a study area in upper floor living room 9. place between master bedroom and children room is wasted...

    $99 (Avg Bid)
    $99 Avg Bid
    7 bids

    the kitchens going to be 241 cm and above gypsum, 2. I'm changing a little bit units they want less drawers in all 6 kitchens. I will need to change the in all the showers the size is the same just small movements and to Wright on etch wall the tipe of tiel we are going to have . 4. I will need another look at the bathroom in...to the shower. 5. To change a little details in the ceiling plans ( light ,ac and gypsum plan to add). Also to do a folder ? with etch villa with all the carpentry work : kitchen ,closets,entrance cabinet ,TV wall,all the doors list that we already have All the closets will be 259 cm and above gypsum .untill 280 to our ceiling. All the corridors cabinets that you didn't do last time 2 down stairs and 1/2 upstairs for the washing machine ...

    $656 (Avg Bid)
    $656 Avg Bid
    1 bids

    I'm looking for a creative and experienced freelancer to bring my vision of a cozy fair stand to life, primarily focusing on showcasi...series of vegan products that we also sell EDIT 2: Make sure you use actual size; 5 meter wide and 3 meter deep. The stand has 3 walls. So only one opening (5m) EDIT 3: So many of the AI generated images are very full of all kind of furnitures and several bar counter etc. We should have one counter, behind which we are able to prepare and serve food. The entry should not be filled with random stairs, counters.... EDIT 4: Check the file Exhibition rough outline. This is an example of something that would actually be doable. I need a 3d model of something like this. EDIT 5: AI entries are good as idea source. But they are not doable. I need...

    $272 (Avg Bid)
    Featured Guaranteed
    $272
    358 entries

    I need floor plans for a new single-family home, which has 3 levels over garage level and is 1600sf max. The city allows me only 2 specific configurations for the size/shape of the house (S1 and S2). I would like a functioning floor plan for both Schemes to decide on what works best. In each scheme: Level 0 is garage and house entrance with stairs going up to level 1. Level 1 is for the living room, kitchen, a half bath, closets, shelves, maybe a laundry room (or should it be on level 2?) Level 2 is for bedrooms and bathrooms. Hopefully three bedrooms can fit well. Level 3 is for either an extra bedroom, or an extra living room to relax and enjoy the views. Needs a bathroom in either case. Ideal Skills: - Experience in Modern Residential architecture - Strong expertise in dr...

    $122 (Avg Bid)
    $122 Avg Bid
    57 bids

    ...discrepancies in wall heights that require adjustment. - **Foundation Corrections:** The foundations do not align with the intended design specifications. - **Stair Modifications:** The existing stair layout is incorrect and needs redesigning. I'm open to discussing the specifics of each of these elements, including the degree of roof pitch adjustment and the precise modifications needed for the stairs to ensure they meet both functionality and design standards. **Ideal Skills and Experience:** - Proficiency in Chief Architect software - Strong background in architectural design, particularly 3D modeling - Experience rectifying architectural plan conflicts - Good communication skills to discuss and align on project specifics I look forward to collaborating closely with th...

    $23 / hr (Avg Bid)
    $23 / hr Avg Bid
    29 bids

    ...future investors. Preliminary design: Soil and topography samples Phase 1 (Conceptual Phase) - Color plans - Exterior and Interior 3D images Phase 2 (Schematic Phase) 1. Architectural and landscape plans - Site plan - Floor plan (all floors) - Dimensioned plans - Building level plans - Exterior materials plan - Roof plan - Building view (4 sides) - Building parts (4 sections) - Main details - Stairs details - Railing details - Roof details - Wall and floor details - Roof details - General details - Pool details - Pool deck detail - Gutter details 2. Interior site plans - Floor plans - Floor plan (all floors) - Dimensioned plans - Interior material plans - Ceiling plan - Light points plan - Building sections (4 sections) - Enlargement (detail) of each room - Detail of built-...

    $588 (Avg Bid)
    $588 Avg Bid
    36 bids

    I'm looking for a skilled Designer with significant experience in home renovations, particularly in ren...Designer with significant experience in home renovations, particularly in renovating both main floors and basements of bungalows. Here are the specifics: - It should be noted that the current condition of the main floor and basement is bare studs. Main Floor requires - 2 bedrooms - 1 bathroom - 1 kitchen - 1 see through fireplace were the tv can be ontop - we value cooking and appreciate storage . (stairs to downstairs) basement requires 1 bedrooms 1 bathroom , 1 utility room 1 small kitchen 1 living room & storage area. interior dimensions of the house are 18x37 feet We will require counsel on design decisions, so a good sense of aesthetics and functionality will ...

    $123 (Avg Bid)
    $123 Avg Bid
    26 bids

    I'm looking for a landscaping expert to breathe new life into my front yard. The design should include: - Stairs and a retaining wall. - A focus on incorporating shrubs and trees. - Specifically, I'd like evergreen and olive trees added to the design. Ideal skills would be past experience in creating visually pleasing and structurally sound landscapes, with working knowledge of the best way to incorporate and care for evergreen and olive trees. Understanding of gardening techniques to achieve balance between aesthetics and functionality will be preferred. Willing to spend more on continuous work with the right person ?

    $32 (Avg Bid)
    Guaranteed
    $32
    12 entries

    I require a comprehensive floorplan for a medium-sized, commercial building. This is not a remodel. What is needed is simply accurate measurements of the footprint of a two-story commercial building with 36 rooms, 3 bathrooms, hallways, stairs, parking lot, and garage etc. and then floorplan/drawing rendered. Approx 20K square feet total. Must be licensed!!

    $873 (Avg Bid)
    $873 Avg Bid
    27 bids

    ...sort of seemless stonework floor texture. 2.) The "lower level" walls, with a single texture. The lower level walls should be approximately 5' tall. The walls should look like stonework walls with enough variation to be interesting. 3.) The "upper level" walls, with a single texture. Similar to the lower level, except that the upper level will have the seating area for the arena, as well as stairs, so it will be much more varying in the 3D height. The center should be open so that when placed on top of the lower level, the arena below can be seen. Then a series of decorative meshes: Barrels, Crates, Beds, Tables, Chairs, etc. These do NOT HAVE TO BE commercial use. This is for a private game, so objects from existing collections are perfectly fine ...

    $50 (Avg Bid)
    Featured Guaranteed
    $50
    9 entries

    We are looking to build a small mezzanine in our factory. The are already has 3 concrete walls so we are after a floor with one lightweight wall, door and stairs. We are looking for someone to take our rough notes and measurements and provide a schematic with required plans to assist our build.

    $54 (Avg Bid)
    $54 Avg Bid
    25 bids

    I'm seeking a professional freelancer with experience in 3D modeling and 2D drafting. The project involves a medium-sized residential building with a moderate degree of complexity. The ideal candidate should have the necessary skills to deliver detailed and accurate models and drafts. Features Required: - Interior details such as arrangement and design of rooms, stairs etc - Structural details including columns, beams etc - Exterior features like windows, doors and more Experience in residential building projects, and proficiency in using relevant modeling and drafting software, is a must for a successful completion of this assignment.

    $151 (Avg Bid)
    $151 Avg Bid
    49 bids

    I'm looking for a creative and detailed-oriented architect to design a multi-level residential building embodying both functionality and elegance. Here are my requirements: - Multi-Story Focus: Specifically, a three-story structure (or more), catering to a sophisticated residential purpose. - Comprehensive Room ...Strong understanding of building codes and zoning laws. - Responsive and open to collaborative revision processes. I'm anticipating a blend of luxury and comfort that maximizes the use of space while providing a sense of home. If you have the expertise and creative vision, I'd love to see your proposal on how you'd bring this structure to life West Facing Plot 26' X 50' Stilt Floor for parking, stairs and lift lobby Ground Floor + 2 Floors ...

    $17 (Avg Bid)
    $17 Avg Bid
    14 bids

    I'm looking for a professional to design a sleek, modern and minimalistic exterior stair...with concrete. - Safety: Incorporate sturdy handrails for safety. - Planning: Must meet local building and planning codes - Style: Aesthetically appealing, embracing a modern and minimalistic approach. Ideal Candidate: - Experience in architectural design, specifically with concrete structures. - Strong portfolio featuring modern home exteriors. - Knowledgeable about safety standards for outdoor stairs. - Capable of creating detailed design plans (CAD) for contractor / permitting use. - Excellent communication and ability to translate my vision into a practical design. Your work will lay the foundation for the welcoming entrance my home deserves. Looking forward to turning this concept ...

    $102 (Avg Bid)
    $102 Avg Bid
    15 bids

    I'm on the lookout for an experienced Interior Designer with a penchant for modern designs. The project space is a small ground floor which includes a living room, dining, Majlis (guest room), stairs and kitchen - ceilings, floors, and bathrooms are not part of the scope. Here's what I'm specifically looking for: Color Scheme: • We're opting for neutral colors. A balanced mix of white, beige, and gray should pervade the room. Style: • The style should ensue a modern industrial theme with a touch of neo classic. Think raw, functional, mature yet minimalist. Focus Areas: • The crux of your task will be the furniture arrangement. Intelligent use of space is primary. Your expertise in picking the right furniture, placing it optimally considering t...

    $140 (Avg Bid)
    $140 Avg Bid
    72 bids

    I'm looking for a professional, thorough and disciplined cleaner who can tackle multiple areas of my home. Specifically, I need assistance with: - The kitchen - The living room - Bedroom, including rearrangement of items for better organization - Entry and stairs, ensuring they remain clutter-free The service is required once a week, harmonized with my busy schedule. Preference will be given to those able to consistently deliver high-standard services on a regular basis. As for the cleaning methods, I would like you to use deep cleaning techniques that leave the space looking spotless, fresh, and sanitized, ready for use. Ideal freelancer should have: - Proven experience in residential cleaning - Strong attention to detail - Proficiency in deep cleaning techniques - Excelle...

    $250 - $750
    Local
    $250 - $750
    0 bids

    First Floor Area: 45m x 25m Height: 4 meters Usage: Textile storage Facade: 10% glass facade for natural light and external view Design Elements: Sufficient entryway for trucks Personnel entrance door Second Floor Area: 45m x 25m Height: 3.5 meters Industrial elevator Stairs: Usage: Garment production line and office space Facade: 30% glass facade for natural light and external view Design Elements: Production Area (70% of the floor space): Placement of machinery and production lines Office Area (30% of the floor space): Work tables, chairs, and partition tapes for the official space

    $151 (Avg Bid)
    $151 Avg Bid
    38 bids

    I am currently in need of a free...of a freelancer proficient in Revit to rapidly create a 3D model designed for my study course. It is important that the basic outline of this model be completed today. Low budget, 20€, very basic model. To be delivered 3D model in revit file that i can open with Revit24. I will probide the 2D dwg drawing of the building and photos of the house. Key Components: - Walls - Floors - Windows, doors, stairs The desired level of detail for this project is basic. Even though the finish won't be intricate, it should be good enough for clear understanding and study purposes. This project is perfect for individuals with proven experience and skills in basic, quick 3D modeling, and rapid execution time. Efficiency and adherence to the deadline is...

    $39 (Avg Bid)
    $39 Avg Bid
    11 bids

    ...for each floor Spot B & Spot E would be 2 two floor levels. Ground with sealing hight of 5 second with seeling hight of 6 meters Spot C the middle and largest. Would have 3 levels with sealing height of 5 for each floor. First and second floors would be as arch balconies above each other. Not full floor but more of mezzanine upper floors style that has an arch curve style. Finally I need a stairs and elevator design in each of the five renting drive through buildings, in a very stylish style, efficient space utilization manner. As well as a food lift on elevator to end comer of each floor level. Need to add more parking spots to meet the requirements of municipality. Sum of renting space for each building and total renting sumed buildings too. Please propose an...

    $146 (Avg Bid)
    $146 Avg Bid
    69 bids
    Trophy icon infographic/visual design Ended

    I require an infographic that will visually represent the values of a school. The purpose of this design is to help communicate these values simply and effectively. The values are: Respect, Accomplishment, Inclusion, Spirituality, Empathy The first letter of the above values = RAISE I would like an...that will visually represent the values of a school. The purpose of this design is to help communicate these values simply and effectively. The values are: Respect, Accomplishment, Inclusion, Spirituality, Empathy The first letter of the above values = RAISE I would like an infographic/Design element to showcase RAISE and the associated values. Personalised and different :) Eg Raising Up, stairs etc etc I have attached some other examples from other schools and the colours w...

    $45 (Avg Bid)
    Guaranteed
    $45
    96 entries

    We need a premium and elegance logo with thin lines with black color for a premium wood flooring company. At the icon we need to have a relationship between the floor and the stairs because the company is dealing with construction premium wood flooring and wood stairs. We DONT want the Wood color we need something clean and elegance. Please don't the send me the classic icons that you send to every contest because i am recieving the same icons ( we are an agency ) The label is: Premium Flooring

    $86 (Avg Bid)
    Guaranteed
    $86
    600 entries

    I'm after someone to provide me with shop drawing, to include 50mm round tube as top rail to include 50mm round tube as bottom rail to include 12mm solid rod as upright for balustrade to include parts list with cutting sizes angles ect please refer to sketch to give you an idea of what im after all sketches are drawn in top view for all measurement's and stairs risers for accurate angles and size

    $348 (Avg Bid)
    $348 Avg Bid
    61 bids

    Top stairs Community Articles