Filter

My recent searches
Filter by:
Budget
to
to
to
Skills
Languages
    Job State
    10,929 steel cad jobs found, pricing in USD

    I am looking for designers that have experience with virtual...of image place a dining table. In the living area (foreground left), please add a couch, rug and coffee table facing camera. In the kitchen area, add bar stools, stainless steel fridge freezer and microwave to match. Please use your discretion if placing any wall art or clocks. Good luck!

    $196 (Avg Bid)
    $196 Avg Bid
    21 bids

    I need an Engineer in Mexico who can deliver accurate CNC (Oxy and Plasma) cut parts to the US and Canada, an Example drawing is attached, Please reply with an official quote and include the freight cost! I do not want to work directly with the CNC shop and want to have someone in charge of the operation in Mexico. multiple quotes from multiple shops is preferred in an event simultaneous jobs need...

    $14 / hr (Avg Bid)
    $14 / hr Avg Bid
    5 bids
    $85 Avg Bid
    30 bids
    CAD panel design 6 days left
    VERIFIED

    Need a person with knowledge of cad to do a simple panel for an iPad mini 2. More information via mail, prefered an italian person (just to be able to describe the job better)

    $24 (Avg Bid)
    $24 Avg Bid
    30 bids

    you can give me CAD project and i gives you 15%

    $95 (Avg Bid)
    $95 Avg Bid
    33 bids

    Structural Steel Estimator to Provide Accurate & Detailed BOQ and Colour Coded Mark-up of Plans. On-going work. 1 job every 24 hours or so. Our client will be working solely off our BOQ so I need a confident, accurate and Experienced estimator for this job.

    $35 (Avg Bid)
    $35 Avg Bid
    33 bids

    we are looking for CAD jewelry designers that know how to work with rhino and zbrush the work is from home, you send us designs and we pay per design we want to use work day - depend on you, the more you work the more money you can make the pay per design is dependent on the telnet and its determined In conversations between us and the designer

    $21 (Avg Bid)
    $21 Avg Bid
    5 bids

    I’m chasing someone to design a flat pack design for a crate that is collapsible and can be made out of a sheet of Aluminium. It needs to CAD designed for allowing to be cut with a CNC router

    $21 (Avg Bid)
    $21 Avg Bid
    20 bids

    ...PAYABLE, 5. ACCOUNT RECEIVABLE , 6. ACCOUNTANT from all TYPES of industry below- 1. Warehousing and Storage, 2. Construction, 3. Financial Services, 4. Accounting, 5. Steel industry, 6. Industrial engineering, 7. Petroleum industry, 8. Chemical industry, 9. Timber industry, 10. Construction of Buildings, 11. Electrical Equipment, 12. Appliance

    $3 / hr (Avg Bid)
    $3 / hr Avg Bid
    18 bids

    Looking for a quick 3D CAD design for a newly designed adjustable bed based on several images and guidelines. This will be to show to Australian investors.

    $29 (Avg Bid)
    $29 Avg Bid
    46 bids

    I just need someone to cut into 2 pieces a cylinder of metal of length 45 to 50 mm. The diameter has to be minimum 19 mm max 20 mm Then the each 2 halves need to have a machined flat surface. See attached sketch. I need it urgently

    $31 (Avg Bid)
    $31 Avg Bid
    25 bids

    i need a cic=vil engineer to design 2 steel structures (frame system and truss system) and provide full construction cad drawings

    $50 (Avg Bid)
    $50 Avg Bid
    29 bids

    I have a very small project I need a mechanical drawing for. It's a simple metal bracket made out of steel plate, with a few bends and orifices.

    $23 (Avg Bid)
    $23 Avg Bid
    18 bids

    project is 80% completed, written it GOLANG + [login to view URL] + PostgreSQL, I need a developer for long term. First goal to complete code and launch the project. This project will grow. hourly/weekly wage will increase when project will be launched, and working. Thanks.

    $80 (Avg Bid)
    $80 Avg Bid
    5 bids

    Building of storage facility from steel stracture

    $168 (Avg Bid)
    $168 Avg Bid
    13 bids

    ...looking for a Designer with 3D modelling expertise that can convert my Architect’s 3D CAD model .dwg file to a format that I can print out on a 3D printer for use at an Expo in early July. My company is a Modular building company that builds 5-star hotels using steel modules that look like shipping containers. The model you will be creating is a 35

    $278 (Avg Bid)
    $278 Avg Bid
    26 bids

    Hi DenkaPolosich, we are looking for someone that can help us to calculate strenghts of a steel beam i a roof construction. Do you have a program or skills to do this? Looking forward to hear from you! Best Robbie J

    $50 (Avg Bid)
    $50 Avg Bid
    1 bids

    ...and insensitive to torsion. Edge protection needs to minimizes the risk of injuries. The aluminium panel system needs to guarantee a level of quality that clearly exceeds steel or fiber material superstructures. Beside design of solution engineer should provide list of materials selected. Manufacturer of profile product portfolio System should

    $250 (Avg Bid)
    Guaranteed Sealed
    $250 Avg Bid
    1 entries

    How many hours would take you to make a custom product page for woocommerce store ? I'd like this page [login to view URL] to look something like this: [login to view URL]

    $25 (Avg Bid)
    $25 Avg Bid
    1 bids
    Jewellery CAD artist 3 days left
    VERIFIED

    Looking for an Experienced cad person that works in Rhino or Matrix. We need someone who has availability for at least 4 hours per day. Tasks will be working with our existing Designer on a variation of different jewelry designs . Diamond Layout ,Shelling and Zbrush are all extra skills that we would highly prefer though it isn't a must. We are looking

    $11 / hr (Avg Bid)
    $11 / hr Avg Bid
    20 bids

    We are currently looking for a draftsperson with Framecad experience who has structural experience and dealing with steel light gauge frames to work on a large commercial project. Position is to start immediately. Please contact[removed by freelancer.com admin]

    $2517 (Avg Bid)
    $2517 Avg Bid
    15 bids

    New business idea requires a CAD designer to create the blueprint for a physical prototype

    $149 (Avg Bid)
    $149 Avg Bid
    54 bids

    3D modelling a steel shed + making 2D drawings from it

    $162 (Avg Bid)
    $162 Avg Bid
    58 bids

    I need a CAD design of a 27in. x 11in. propeller that I can use to create a 2 part mold to make it over and over again. I will need this propeller designed in 2 ways so that one will spin in a clockwise direction and the other will spin in a counter-clockwise direction.

    $67 (Avg Bid)
    $67 Avg Bid
    19 bids

    ...business. I plan to private label and import a stainless steel kitchen appliance from China and sell it through Amazon FBA/a separate website. My top priority at this time is to find a consultant who can help me conform with U.S. Customs/trade regulations in the context of importing stainless steel kitchen appliances from China. For a longer-term arrangement

    $22 / hr (Avg Bid)
    $22 / hr Avg Bid
    7 bids

    ...inspection points as per California Code of Regulations, Title 22, Section 66264: These tanks are horizontal tanks, with 5,000 gallons capacity each, fabricated from carbon steel material with rubber lined interior for protection against wastewater. Dakota Ultrasonic thickness tool was utilized to measure the wall thickness around the tank. The average

    $97 (Avg Bid)
    $97 Avg Bid
    13 bids

    Hi my name is yasin i am working in stainless steel workshop the manger want me to make a new catalog with a round 50+ pages ( in each page around 6 doors ) it is very simple and i need to check each photo on it ( modifying it and make it in good design ) the files upload is a sample of the work ( both cat loge and my door photo ) if we agree

    $140 (Avg Bid)
    $140 Avg Bid
    35 bids

    ...need to be edited as per E-Commerce Standards in addition to our requirements, for uploading on E-Commerce Marketplaces. The Products are- Copper Water Bottles, Steel Water Bottles, Stainless Steel bathroom Fittings and other Home Products. Following are the tasks that need to be done: 1. Making white background. No Blurr/Smudge to be seen and retain

    $32 (Avg Bid)
    $32 Avg Bid
    27 bids

    I'm looking for someone that can listen to my requirement on design of dining table that is foldable and compact.

    $94 (Avg Bid)
    $94 Avg Bid
    30 bids

    We need a Freelancer that could make a technical drawing for our project. What we need: - Our design the frame fully drawn and calculated - The electrical layout - needs to be done in 7 days - Needs to meet Dutch standards more information you can private message‚Äč me!

    $213 (Avg Bid)
    $213 Avg Bid
    38 bids

    i have a series of valve sample. from size 1/2 inch until 4 inch. i need to draw cad for each sparepart. i already have drawing dor size 1/2 inch. you only need to re drawing and measure with suitable size that i will sent to you. each project for specific spare part this time is for size 3/4 inch and 1 inch. freelance must be live in surabaya

    $17 (Avg Bid)
    $17 Avg Bid
    50 bids

    I am looking for a CAD drafter who can convert a old building sketch to CAD. please contact with samples. Thank you,

    $34 (Avg Bid)
    $34 Avg Bid
    52 bids

    Hello Vanessa, We are redesigning our steel detailing manual and would need some assistance with detailing the steel connection, designs, and other figures/tables. Our in-house detailers have an overwhelming amount of work and would like to hire you for our team’s manual redesign project. Is this something you are familiar with (AISC Standards, Welding

    $8 / hr (Avg Bid)
    $8 / hr Avg Bid
    1 bids

    We need shop drawing for Structural Steel modifications to an existing building to accommodate rooftop AC units

    $468 (Avg Bid)
    $468 Avg Bid
    36 bids

    We need a CAD-Design with our logo on it (logo attached) of a black case which contains a printed circuit board (see the pictures below, the measurement unit is mil (thousandth of an inch)). The whole point is to design a case which is close to impossible to open or at least destroys the main part of the module when someone tried to open the case.

    $188 (Avg Bid)
    $188 Avg Bid
    36 bids

    I am looking for an experienced CAD/3D Designer with experience in structural design of metal based structures. Must have excellent 3D modelling skills on SolidWorks or equivalent and structural design/analysis skills. Looking for candidates in Bangalore only!

    $313 (Avg Bid)
    $313 Avg Bid
    39 bids

    Looking for Investors for a SME for 3 to 5 Million USD for a running business into Steel products.

    $41 (Avg Bid)
    $41 Avg Bid
    1 bids

    Need an Auto Cad 2D of a first floor of a building in Okhla. Urgently. By End of day today.

    $76 (Avg Bid)
    $76 Avg Bid
    36 bids

    I want someone to model warehouse which is 40x60ft. Totally [login to view URL]

    $38 (Avg Bid)
    $38 Avg Bid
    23 bids

    ...Bananas, Rice crackers, Celery, Tomatoes, salt and cashew cheese (all organic vegan gluten free) 2) Picking up my chinese herbs and cooking them for 1.5 hours in a stainless steel pot for 1.5 hours following the instructions. I have a full script, a doctors note and all products are legally prescribed. I'm here from 13 to 19 June and require help as

    $333 (Avg Bid)
    Local
    $333 Avg Bid
    1 bids

    Somos una pyme y necesitamos contratar por algunas horas un dibujante CAD, de manera urgente, para elaborar dibujos tecnicos (simples) para un nuevo material a imprimir.

    $5 / hr (Avg Bid)
    $5 / hr Avg Bid
    74 bids

    Responsibilities • In this position, you will be joining a team of CAD Librarians in the Platform Engineering Group (PEG) responsible for developing, maintenance, and enhancement of library symbols used on system validation and debug platform designs for my client's next-generation desktop and enterprise processor family and/or chipsets. Your responsibilities

    $6 / hr (Avg Bid)
    $6 / hr Avg Bid
    8 bids

    Need plan sets for a steel/vinyl/aluminum patio structure. Have prior plans from all aluminum but now using different materials. Will be placing solar panels on top, so need wind and weight load calcs. Need a USA-based engineer because to permitting in local areas around the states. State structural licensing is not required, just a structural license

    $1786 (Avg Bid)
    $1786 Avg Bid
    9 bids

    I have a drawing of eyewear I would like to laser cut, but the proportions might be a little off, so I need someone who has experience with designing eyewear to modi...eyewear I would like to laser cut, but the proportions might be a little off, so I need someone who has experience with designing eyewear to modify the design and make it in CAD format.

    $40 (Avg Bid)
    $40 Avg Bid
    30 bids

    needing the structural plans for a 2 story steel frame build with concrete floor on second story 6m x 8m with 2 car carport under the 8m side

    $124 (Avg Bid)
    $124 Avg Bid
    39 bids

    I need to put a small piece of electronics inside a camera dome enclosure. I need the CAD design for this, so that the electronics can be securely attached inside. Message me if you need more details.

    $147 (Avg Bid)
    $147 Avg Bid
    62 bids
    Trophy icon Design a Logo Ended

    We requi...the company initials of "MW". We provide a laser cutting service so the logo needs to be of a design that is simple enough (i.e. no 3D effects) to be able to cut out of steel for when we want to brand our work. We are a metal working company so would like a more "industrial" look. We will require JPEG & Adobe illustrator CS4 files.

    $119 (Avg Bid)
    Featured Guaranteed
    $119 Avg Bid
    157 entries