Thermodynamics design heat exchanger jobs


My recent searches
Filter by:
    Job State
    9,643 thermodynamics design heat exchanger jobs found, pricing in USD

    Need a rectangular drawing of heat recovery plenum box. 2x2. X 3 feet long. 18 inch round collar vent connection on each end and 2 openings on each side for coil modules to slide in approximately 12 wide by 18 high. A rectangular drain pan to catch condensate at bottom. Four hanger L brackets to suspend from mechanical room ceilings. Construction from 16 gauge stainless steel. Must be air tight.

    $251 (Avg Bid)
    $251 Avg Bid
    34 bids

    We had a con-ex box built into a trailer with lights, baseboard heat and window unit AC. The town, Linden won't issue permit to spot the trailer without a raised seal on the application. The electrician, from PA where the office was built, has a license but, I'm told PA does not issue or use raised seals.

    $527 (Avg Bid)
    $527 Avg Bid
    4 bids

    Project Title: Chemical Engineering Area of Focus: Process Separations Expected Deliverable: Calculations Timeline: December 6, 11:59 pm Eastern Time Zone Skills and Experience Required: - Proficiency in thermodynamics and chemical engineering principles - Strong background in mathematical modeling and calculations - Experience in conducting thermodynamic analysis and simulations - Ability to interpret and analyze data accurately - Attention to detail and ability to meet deadlines Project Description: Make sure to box the answers and write everything digitally. No hand written. Do not use Chegg/ChatGPT or any kind of service. I need question 1, 3, and 4 done. Problem 2 will help you for 3 and 4. I am seeking a skilled chemical engineer with expertise in ASPEN and Process

    $100 (Avg Bid)
    $100 Avg Bid
    13 bids

    ...Sheet Metal cover design for Kunafa cooking purposes. The ideal candidate should have experience in creating functional and aesthetically pleasing designs for kitchen appliances. Requirements: - The stove should be small in size, perfect for small kitchens or outdoor cooking. - The main feature that the stove should have is adjustable heat, allowing the user to control the temperature for different cooking needs. - The design should also be portable, making it easy to move and store when not in use. - It would be a plus if the stove has a built-in thermometer, providing accurate temperature readings for precise cooking. Skills and Experience: - Experience in designing kitchen appliances, particularly stoves and sheet metal designs. - Proficiency in CAD software an...

    $60 (Avg Bid)
    $60 Avg Bid
    6 bids

    I am looking for someone to perform a heat load calculation on my old stone building in rural Wales. The building is more than 2000 sq ft in size. - The building currently has an existing heating system, but it needs upgrading. - The main purpose of the building is residential. Skills and experience required: - Experience in performing heat load calculations for buildings - Knowledge of heating systems and upgrades - Familiarity with residential buildings - Understanding of the unique challenges of old stone buildings in rural areas.

    $517 (Avg Bid)
    $517 Avg Bid
    38 bids
    MEP designer 3 days left

    1. Complete set of Electrical Plans 2. Heat Load Calculation using HAP, Trace Software, Manual J,S,D on Wrighsoft. 3. Rescheck, Comcheck and T24 4. Complete a set of Mechanical HVAC Plans and Plumbing Design & Riser diagram

    $149 (Avg Bid)
    $149 Avg Bid
    31 bids

    Hello, what I want is a logo for my company in the HVAC, Heating, Ventilation and Air Conditioning sector, I thought of a logo that draws the public's attention to our area of ​​intervention, a logo that has the name of our company and that has something simi...some symbol of hot and cold, it is not necessary to have all these concepts, this is just several ideas that can be included. The name of the company is "Nuclimune, Lda" (without the parentheses of course). The said slogan could be our area of ​​intervention "Climatização Unipessoal, Lda." The colors can vary from warm tones like some type of orange, red to blue tones, because both colors mean heat and cold, which standardizes our área. Thank you in advance for your attention an...

    $27 (Avg Bid)
    $27 Avg Bid
    106 bids
    ansys work 1 day left

    i need also project file you can use any software to accomplish result. I am looking for an ANSYS expert to assist me with a project involving comprehensive simulation and analysis. The ideal candidate should have experience in ANSYS and be proficient in the fol...should have experience in ANSYS and be proficient in the following areas: basically make sure cutting hole by laser. it is roughly 2 mm hole anywhere on cylinder. i need graph of depth of cuts for various laser scanning speed, Depth vs. laser power for various thermal conductivity. i just need data how it will effect while cutting. i am currently working on reacher project. I want to analysis heat exchange through cylinder. Demotion of cylinder: Hight : 10 mm inside diameter 5 mm. outside diameter 6 mm. material : ...

    $43 / hr (Avg Bid)
    $43 / hr Avg Bid
    6 bids
    Turner Air & Heat 16 hours left

    Need new logo edited and sized for shirt and pocket on shirt Looking is what i want logo to look like

    $26 (Avg Bid)
    $26 Avg Bid
    63 bids

    Project Description: PTAC Heat Banging NYC I am looking for a skilled professional who can help me with my recurring issue of loud banging noise in my PTAC unit. I have not attempted any repairs yet and I need someone who can diagnose and fix the problem efficiently. Skills and Experience: - Experience in repairing PTAC units and troubleshooting issues - Knowledge of common problems and solutions related to loud banging noise in PTAC units - Ability to identify and fix recurring issues in PTAC units - Familiarity with the specific make and model of my PTAC unit (Simon-Aire) - Excellent problem-solving skills and attention to detail - Good communication skills to provide updates and explain the repair process - Reliable and punctual, able to complete the job in a timely manner If ...

    $143 (Avg Bid)
    $143 Avg Bid
    4 bids

    ...and modern decor. Lighting: Energy-efficient, warm lighting to create inviting and comfortable environments. Materials and Construction Specifications: - Eco-friendly Focus. - Exterior: Modern wooden cladding that harmonizes with the natural surroundings. Apartment Design Features: Living Areas: Open-plan layouts with multifunctional furniture. Bedrooms: Comfortable, serene spaces with ample storage. Terraces: Furnished to enjoy sea and airport views. Unique Identity: Each unit named after a local spice, reflected in subtle design elements : Choose between : Vanilla - Mayotte is known for its high-quality vanilla. Cinnamon - Often used in both sweet and savory dishes. Turmeric - Known locally as 'yellow ginger', used for its color and flavor. Cardamom - Used in ...

    $160 (Avg Bid)
    $160 Avg Bid
    28 bids

    Design an HVAC system for a specific building. 3D axonometric view: Riser(Supply & Return), Trunk & Branches(Supply & Return), Gas supply(Yellow Lines & Meter), Roof Top Unit, Heat Exchanger, Air Conditioning Unit. Reflected Ceiling Plan: Diffuser, Returns, Annotations, Bathroom Ventilation, VAV box, Structural Grid & Dimensions, Acoustic Ceiling Tile layout, lights & diffuser.

    $85 (Avg Bid)
    $85 Avg Bid
    15 bids

    Hot uk deals is a site were people post deals they find both online and in store which are then given heat if hot / popular or cold if a poor deal id like something that i can tweak and say for example alert me if any deal hits say 100 degrees plus . the site would need to be scanned all the time as deals increase by the minute etc , thanks

    $201 (Avg Bid)
    $201 Avg Bid
    37 bids

    I am looking for a freelancer with experience in Python coding for a project related to dynamic thermodynamics. The specific task I need the Python code to perform is simulation. I have some preferred libraries or tools that I would like the freelancer to use in the code, and I would also like extensive commenting within the code. Please let me know if you have the experience to do this project.

    $468 (Avg Bid)
    $468 Avg Bid
    60 bids 1. User turns on app and sees 1st Frame flash until app loads. 2. 2nd frame would be visible if NFC is not turned on, or app is not granted privileges for it 3. Third frame would indicate if the user is logged in, and would display some helpful documentation to the user. 4. After NFC is turned on user scans water meter, and water meter icon(yellow) is displayed with start button (if it was heat meter, then grey meter will be displayed) 5. After user presses start button on 5th frame, meter activation process starts, which begins with grey icon turning into dark grey, and onto green if all step was successful. If step is not successful then icon turns to red. List icons, and bottoms icons represent same functionality. 6. If all steps were successful (except 4th one), and use...

    $4573 (Avg Bid)
    $4573 Avg Bid
    119 bids

    I am looking for an experienced freelancer to create a high-quality presentation about 20 mechanical components like ( boilers , heat exchangers , rotary equipment, tanks) with respect to standards. The presentation should be created with an intermediate level of technical knowledge in mind, and the objective should be to provide an overview of the components. No specific design preferences are given by the client, so the freelancer is free to suggest the best design for the task. The freelancer must be detail oriented, skillful in developing effective presentations and experienced in creating presentations related to mechanical components. Understanding of the target audience is expected to ensure the completed presentation meets customer needs. The freelancer needs t...

    $171 (Avg Bid)
    $171 Avg Bid
    32 bids

    ...high-quality foam without the use of heat. This project will require the adaptation of existing ideas and the integration of new innovations. Skills Required: • Mechanical Engineering Expertise: Proven ability in the design and engineering of consumer products, particularly with mechanisms involving fluids. • Proficiency in Fluid Dynamics: Strong understanding of aeration and emulsification of dairy or similar liquids. • Experienced in CAD Design: Skilled in using CAD software to design intricate parts and assembly. • Prototyping and Material Knowledge: Capable of selecting suitable materials and creating prototypes for testing. • Analytical and Problem-Solving Abilities: Must be able to analyze the patent for potential desi...

    $360 (Avg Bid)
    $360 Avg Bid
    13 bids

    I am in need of a designer and draftsman with experience in ASME SEC VIII and TEMA and API 660 Design to create a pressure vessel, Shell & Tube Heat Exchanchers design for my project. Specifications: - I have detailed specifications for the design that need to be followed. - The dimensions and specifications are already determined and must be incorporated into the design. Timeline: - The pressure vessel design needs to be completed within 2-4 weeks. Skills and Experience: - Proficiency in ASME SEC VIII and TEMA and API 660 Design is required. - Experience with pressure vessel design and drafting is essential. - PVElite, AutoCAD - Attention to detail and the ability to follow specifications accurately are crucial for this proje...

    $417 (Avg Bid)
    $417 Avg Bid
    31 bids

    Our logo for ChillBite Curry Puffs embodies the essence of our brand with a playful yet sophisticated touch. The design features a stylized, cool-hued curry puff at its center, capturing the essence of the frozen aspect of our product. The gentle curves and inviting colors evoke a sense of warmth and satisfaction, suggesting the delightful experience of enjoying our delicious, ready-to-heat curry puffs. The incorporation of a subtle steam element rising from the curry puff symbolizes the convenience and freshness of our frozen offerings. The overall aesthetic is clean, modern, and appetizing, reflecting the high-quality and contemporary appeal of our products. The chosen font complements the visual elements, striking a balance between friendliness and professionalism. The c...

    $10 (Avg Bid)
    $10 Avg Bid
    1 bids

    need to guideline for Analysis of the influence of heat transfer mechanisms on the energy performance of the building fabric elements for the building, use python tools.

    $470 (Avg Bid)
    $470 Avg Bid
    51 bids


    $6363 (Avg Bid)
    $6363 Avg Bid
    95 bids

    I am looking for a freelancer to design a hot water heat pump system with a heating capacity between 10kW and 20kW. This system will be primarily used in residential settings and operate on renewable energy sourced from solar, wind, or other sources. This project is especially suited to skilled designers who have experience in designing heat pump systems to meet residential needs while using renewable energy. The system will require a buffer tank which will be used to store heat energy and potentially act as a heat battery. The house is large with the current system being 3 separate hot water tanks, with electric elements. The new system will have a large heat pump as the primary heat source with electric elements as a backup for high hot w...

    $751 (Avg Bid)
    $751 Avg Bid
    37 bids

    I am looking for a professional and experienced mechanical engineer to help with structural design, and research at our startup projects. The timeline for completing this project is 50 days deadline. This project would require an experienced eye to handle complex and challenging tasks as well as an understanding of the principles of mechanics, kinematics, thermodynamics, and fluid mechanics. The successful applicant should be able to think critically and act quickly all while working under pressure and juggling multiple projects. The mechanical engineer must have excellent communication skills and the ability to work effectively as part of a team or autonomously. Experience in CAD software is a must. If you love bringing ideas to life, can provide creative solutions to proble...

    $311 (Avg Bid)
    $311 Avg Bid
    27 bids

    ...who can assist me with designing the ventilation system for my indoor pool. The specific tasks for this project include designing the ventilation system, calculating the heat load, and selecting the appropriate equipment. I do not have any specific requirements or preferences for the ventilation system, so I am open to suggestions. I need this project to be completed within a short timeframe of 1-2 weeks. Ideal skills and experience for this job include: - Strong knowledge and experience in mechanical engineering and HVAC systems - Familiarity with designing ventilation systems for indoor pools - Ability to calculate heat loads and select appropriate equipment - Attention to detail and ability to meet tight deadlines. Must be mechanical engineer able to certify and s...

    $923 (Avg Bid)
    $923 Avg Bid
    37 bids

    My project requires an experienced acoustic engineer to assist with assessing noise from a heat pump at a residential property. Advice needed to design an acoustic screen that achieves approximately 10db reduction from the noise source to a neighbouring window. Advice will be used to support a planning application. We can provide drawings, plans and photos for comment. This project is urgent, and requires an experienced professional who can assess the situation and report back quickly.

    $29 / hr (Avg Bid)
    $29 / hr Avg Bid
    5 bids

    I am seeking an experienced master of mechanical engineering and engineering management (industrial engineering) with the desired timeline for completion of the degree estimated to take 2 years. The desired professional should be knowledgeable in the field of mechanical engineering, which includes mechanics, thermodynamics, materials, and energy science & advanced heat transfer. The ideal candidate must be able to demonstrate creativity, efficiency, and sound judgement in order to complete projects within a specified timeline. The professional must also have the experience and acumen to advise and mentor junior engineers. I am looking for a candidate who can guide me daily into my classes.

    $27 (Avg Bid)
    $27 Avg Bid
    21 bids

    I'm looking for assistance with creating a few hot sauces labels for a new business. I already have a specific name and theme in mind, and am looking for someone to help me bring it to life. We have a lineup of four different hot sauces, each bringing a different level of heat. Here is our flavors in order of spiciness : Pineapple cajun jalapeno, Mango Tacos habanero, Peach cobbler with scotch bonnet, Cherry raspberry with big mama. The style of the hot sauce label should be cartoonish, so that it stands out on the shelves and appeals to potential customers. We also want the name Watatatow to be displayed, which will become our logo. We want the labels to be fun to look at and have vibrant colors. We also want the label to include all ingredients in the back. This project will...

    $69 (Avg Bid)
    $69 Avg Bid
    105 bids

    My project involves using Autodesk CFD to conduct a heat transfer analysis on a given system. I have specific parameters and conditions that need to be considered for the analysis, as well as a need for a detailed report of the results. The report should include all relevant data pertaining to the analysis, with a short summary of the findings. The ideal freelancer for this project should have extensive experience with Autodesk CFD and be familiar with conducting heat transfer analyses. If you feel confident that you are the right freelancer for the job, please do not hesitate to apply.

    $117 (Avg Bid)
    $117 Avg Bid
    36 bids

    I am looking for an experienced engineering professional to perform simulations on a solar still system using ANSYS. The primary purpose of the simulations is to derive an optimal design for the system through analysis of heat transfer, fluid flow, and structural components. I expect the simulation to result in a designed that reaches the optimal performance of the system to be identified by the end of the project and am looking for a completion timeline of two months. The simulations should involve fluid flow analysis. Therefore, the ideal candidate should have an advanced understanding of thermal energy engineering principles, advanced ANSYS functions, and demonstrated experience running similarly complex models.

    $48 (Avg Bid)
    $48 Avg Bid
    18 bids
    Trophy icon SoleLux Logo Contest 8 days left

    ...incorporate cool colors such as blues, greens, and purples. I am open to the designer's creativity and do not have any specific elements or symbols that need to be included. Ideal skills and experience for this job include: - Strong graphic design skills - Experience in creating modern logos - Knowledge of color theory and the ability to work with cool colors - Creativity and the ability to come up with unique and eye-catching designs. Brand Name: SoleLux Brand Products: • Foot File and Callus Remover • Electric Feet Callus Removers • Foot Spa Bath with Heat • Electric Callus Remover • Callus Remover Shaver Brand Mission Our Brand mission is to deliver innovative foot care solutions that enhance overall well-being, self-care, and co...

    $30 (Avg Bid)
    977 entries

    ...This script has a mix of some Dave Chappelle's laid-back style, witty humor with Kevin Hart's high-energy, expressive style. Here's how the script could look: Don’t actually use Kevin Hart or Dave Chapelle or an animated version of them but someone that actually looks similar and acts like them is cool. This will be the script: **Actor #1 (Kevin Heart looking Style):** *(animatedly)* "Man, this heat is disrespectful! My AC's down. I can't live like this, I need help! You know somebody who can fix this tragedy?" **Actor #2 (Dave Chappelle looking Style):** *(calmly)* "Yeah, brother, just call 'My AC Hook Up'. They're like the AC whisperers." **Actor #1:** *(exaggerated disbelief)* "What? My AC Hook Up? Tha...

    $250 (Avg Bid)
    24 entries

    I need an air curtain model to control the temperature of a food cabinet. The model should include speed control, as well as possible heat settings and/or remote control. Ideally, it should be suited to food cabinet size, which is small. Please let me know if you have any questions or need more information. Thanks!

    $161 (Avg Bid)
    $161 Avg Bid
    24 bids

    Im looking for Radiant Heat loop design. My home is approximately 2300sq ft.

    $93 (Avg Bid)
    $93 Avg Bid
    12 bids

    ... whimsical, and iconic. Details : So I’m a professional racer. I’m wanting to get art drawn up that I can have printed onto tshirts and sell. I drive 4 wheelers and my race name is BadBunny 707 and I want that on the shirt design. Then I want some sort of cartoon female rabbit with brown hair, and a race suit and high heel boots on. I’m wanting her to have obvious breasts and be very feminine. If she can be standing by a 4 wheeler that would be great. I also want all my social media information on the print as well. These will be put onto iron on paper and heat pressed onto t shirts. So the size I would need it to be is about the size of a stand letter paper. If this is something that you think you can do please let me know. I’m attaching pi...

    $108 (Avg Bid)
    $108 Avg Bid
    103 bids

    I am looking for a PCB designer to create...all the necessary components and connections. Type of PCB material: Aluminum - I require the PCB to be made of aluminum for its durability and heat dissipation properties. Specific features or functions required: Yes - The PCB should have specific features and functions tailored for the water supply control system. Ideal skills and experience for the job: - Proficiency in PCB design and layout - Knowledge of medium-sized PCB design principles and techniques - Experience working with aluminum PCB materials - Familiarity with designing PCBs for water supply control systems - Ability to incorporate specific features and functions into the PCB design If you have the skills and experience mentioned above, please submit ...

    $234 (Avg Bid)
    $234 Avg Bid
    7 bids

    Civil Engineering, Solar analysis, Solar entry, Shading device design, Building performance (6-8 x A3 landscape pages, Glazing, Steady State Heat Loss

    $92 (Avg Bid)
    $92 Avg Bid
    8 bids

    ...category management as it directly influences customer perception and profitability. • Real-world examples: Implementing dynamic pricing strategies based on demand and supply analytics to maximize revenue. 2. Placement or Shelving: • Importance: Effective shelving or product placement enhances visibility and accessibility, improving sales and customer satisfaction. • Real-world examples: Utilizing heat maps and customer journey analytics to optimize product placement and enhance shopper engagement. 3. Assortment: • Importance: Assortment planning ensures a balanced and appealing mix of products catering to diverse customer preferences. • Real-world examples: Analyzing market basket analysis to understand product affinities and optimize assortment f...

    $25 (Avg Bid)
    $25 Avg Bid
    24 bids

    Deliverables 1. Electrical Load 2. Heat Load Both are to be calculated in excel for the home layout sent by client

    $180 (Avg Bid)
    $180 Avg Bid
    1 bids

    Hello, we are Words Online, and we are looking for Czech translators for a 1-Million-word project. Summer is starting to go full swing, so there’s nothing better than a super project to keep you from thinking about the heat. We need Czech translators with e-commerce experience, or willing to learn, for a one-million-word project that will run for about 5 weeks. There is no limit to how many words you will work on; meaning you will be able to work on how many words you wish to. Hourly earn averages at around 15 USD and can go up to 35+ USD.

    $8 / hr (Avg Bid)
    $8 / hr Avg Bid
    2 bids

    ...Core Idea Solar Order Web acts as a digital bridge between customers and solar energy installers and offers access to a range of other energy-optimized products, such as heat pumps. Customer Side: • Basic Information: Before diving in, customers are met with: Information about the service The ability to create an account Educational material on solar panels Step-by-step guide to ordering and installation A list of potential suppliers The rating system for suppliers • User Experience: Simple and intuitive user interactions via an account Integration with AI to assist customers in choosing the best offer The ability to design their solar energy solutions using Google API Supplier Side: • Profile Creation: Suppliers present themselves through: Basic company inf...

    $4038 (Avg Bid)
    $4038 Avg Bid
    96 bids

    ...have outside access to a ramp. This tiny house will be designed to accommodate a retiring couple but have extra space for our three adult children to visit and accommodate possible future grandchildren. We would like the main living space to be spacious and open with plenty of seating space and room for a tall Christmas tree. In this area we would like to have a fireplace, gas or electric but gives heat. Off the living area we need a kitchen area that offers full size appliances, a pantry and open wall space to accommodate for wall shelving rather then upper cupboards. We want to add space to hang cast iron on a wall. Off the living space we would like to add a moving wall. When the wall is pulled out it will shrink the living space but open up a private room for our wheelchair c...

    $428 (Avg Bid)
    $428 Avg Bid
    44 bids

    ...WE ARE NOT LOOKING FOR A LOGO, BUT FOR A GIFT BOX DESIGN!!! USE OUR EXISTING LOGO PLEASE. THANKS. I'm seeking a talented and creative designer to develop a gift box design for our new brand: BE Living. We need a standard gift box packaging design for our cookware series, and it must be provided in AI format to allow for customization for each box and new series in the future. Please note the following characteristics of our cookware: 1. Ceramic Non-Stick Coating: Our cookware is equipped with a state-of-the-art ceramic non-stick coating. Importantly, it's free from harmful compounds such as PFTE, PFAS, and PFOA. This feature underscores our commitment to health-conscious and environmentally friendly products. 2. Available for all heat sources...

    $25 (Avg Bid)
    30 entries

    بحث كامل عن النباتات البرية وعن طريقة انتاجها في منطقة الخليج العربي وفي الكويت تحديدا

    $370 (Avg Bid)
    $370 Avg Bid
    17 bids

    HVAC Technician / Specialist: Need an HVAC specialist who can come in ASAP. The furnace doesn't listen to the thermostat anymore, so the only way to turn off the heat is shut off the breaker for the HVAC unit. As such, the home is freezing or way too hot. Address: 72 Chemin du Lac Barnes, Val-des-Monts, QC J8N 6E4

    $37 / hr (Avg Bid)
    $37 / hr Avg Bid
    2 bids

    I require a current limiter that will efficiently limit any voltage coming in to 10a output current at the same voltage as the input voltage. The input voltage can range from 200 to 800v. I can dissipate up to 200w of heat if required, Mount all elements that can heat up on the bottom of the PCB so that it can be mounted to a liquid cooled aluminium plate. The device must act as a dummy switch, to turn it on i will supply it with 24v, to turn it off i will cut the 24v power to it. The device must be robust in the sense that there can be 10000a wanting to pass thought, it must handle this efficiently and only allow 10a to pass. The mosfet driver should be isolated as well as the 24v incoming power supply. Only quality components should be used and components should be slightly...

    $25 / hr (Avg Bid)
    $25 / hr Avg Bid
    1 bids

    Hi, I would like to build a fluorescent imager and be able to edit the input parameters via script so I can optimize the process. Essentially a 2D stage with a camera to capture images and a TEC to heat and cool. I would like this built on a RasberryPi but it is not required. The core functions that are needed: 1) "handler", 2D stage +servo or solenoid , ~18"x6", accuracy +/- ~1/32. Need to be able to set times and locations for the handler to move. 2) 2 TEC (thermoelectric controller), need to be able to set the temperature of the TECs. 3) 2D stage "camera stage" ~6"x6" with greater than 100um accuracy. This stage will be holding a camera and be acquiring images of ~6"x6" area. I will need to be able to have the fuction...

    $3837 (Avg Bid)
    $3837 Avg Bid
    8 bids

    I'm looking for a freelancer that can help me with an industrial-scale project that re...project that requires estimating the cooling required to control the exotherm of a hazardous reaction. Specifically, my project entails understanding the low heat capacity of the reactants, and controlling the reaction within a temperature range of 50 to 100°C. I need the professional expertise of someone that knows how to mitigate the risks and consequences of such a hazardous reaction. The ideal freelancer will have experience working in pilot, or industrial scale reactions to generate a safe, yet effective cooling estimate. The final deliverable should include a detailed report of the heat capacities of the reactants, and the cooling design that can efficiently manage t...

    $379 (Avg Bid)
    $379 Avg Bid
    5 bids

    I am looking for a skilled freelancer into 3d printing and coding to build 2 small magnetic levitating displays for me and optimize it for me so that it floats steadily. The displays should be 8-16 inches in size. It should have feet and vent holes so it does not over heat and power connectors for the base and wall of the us standard with 6-10 ft cable. it should be silent. I want it to hold 1 pound or over very steadily and it has to be relatively easy to set the magnet on the display to float compared to the Woodlev magnetic levitating display of which I have an amazon link below. If you don't want to click my link, just look up "woodlev magnetic le...

    $446 (Avg Bid)
    $446 Avg Bid
    36 bids