Threadx bootloader jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    617 threadx bootloader jobs found, pricing in USD

    Hello I need a UART/LIN Bootloader for NXP S32K116/S32K146. From NXP there is available Bootloder for S32K148 which have to be customized. Regards Ivan

    $583 (Avg Bid)
    $583 Avg Bid
    5 bids

    Hi Hema S., I noticed your profile and would like to offer you my project. Briefly: Developing NXP S32K116/146 Concise Bootloader over UART and LIN. To receive SREC and flash into application space. [Removed by Freelancer.com Admin for offsiting - please see Section 13 of our Terms and Conditions]

    $724 (Avg Bid)
    $724 Avg Bid
    1 bids

    I need the Espressif commands to load a bootloader to the Esp32, that protects it from uploading any other sketch unless with the encryption key. Thanks a lot, Paul

    $255 (Avg Bid)
    $255 Avg Bid
    3 bids

    We are looking for someone that can create an avr2560 based bootloader that supports micro sd card updates, stk500_v2 and serial updating. This is going to be used mainly with the Arduino platform.

    $750 (Avg Bid)
    $750 Avg Bid
    1 bids

    Bootloader currently resides in first page of pic memory. Move bootloader code to last page, let MSD report size to OS as available size on PIC. Remove code referring to C5 for LED (no need for LED), change enter bootloader button from HIGH to enter to LOW to enter. Xtal and fuse settings discussed on acceptance of job. Only necessary for: - PIC16F1454 - PIC16F1455 - PIC16F1459 [login to view URL...

    $20 (Avg Bid)
    $20 Avg Bid
    1 bids

    After system root, it shows bootloader unlocked warning. We want to take off the message.

    $362 (Avg Bid)
    $362 Avg Bid
    2 bids

    I have a Moto G7 that I want to flash with TWRP, LineageOS and MicroG. Bootloader is unlocked, developer option and OEM checked. You will remotely flash the new OS using Team Viewer or equivalent

    $18 (Avg Bid)
    $18 Avg Bid
    3 bids

    This is not Android Application Development. This is low level kernel and bootloader code development and debugging on AOSP framework. Key Responsibilities Bring up Android Open Source Project (AOSP) system-level software (Bootloader, Kernel, Android Framework) on new hardware Write and maintain kernel drivers Debug Linux kernel panics and crash dumps Ensure device system performance (har...

    $12 / hr (Avg Bid)
    $12 / hr Avg Bid
    23 bids

    We are looking for an Embedded Firmware Engineer skilled with ARM Cortex M4-Microcontrollers (Nordic Based microcontrollers will be added advantage ) and Esp32 Microprocessor / Digital sensors Interfacing / Serial communication protocols like i2c,SPI,i2s / Good Knowledge in Embedded C, C++and Knowledge in Threadx / FreeRtos will be added Advantage.

    $38 / hr (Avg Bid)
    $38 / hr Avg Bid
    3 bids

    In my project need to write a boot code that do self-programming from external flash memory SST25VF020 via spi. MY DEVICE PIC18F67K22 it will be better if the code will be written in basic, such picbasicpro (pbp3)?

    $211 (Avg Bid)
    $211 Avg Bid
    6 bids

    I need to downgrade Samsung Galaxy A6 from Android 10 to Android 8(original operating system). The big issue is to downgrade the bootloader. Please bid only if you had downgraded Android version on phones earlier.

    $224 (Avg Bid)
    $224 Avg Bid
    4 bids

    # General Bootloader and Windows application for updating firmware in STM32 mikrocontroller via UART. ## Derivate to support - STM32F301C8T7 - should work for the whole family with least modifications ## Parts to deliver - Bootloader for STM32 (Keil MDK5) - Windows 10 application for firmware application update # Bootloader ## General description Firmware which should be flashed into the cont...

    $1592 (Avg Bid)
    $1592 Avg Bid
    15 bids

    android 11 change the bootloader animation.

    $61 (Avg Bid)
    $61 Avg Bid
    4 bids

    My ***MAX*** budget for this project is $75. Please DO NOT bid if you do not agree with the given amount, nor if you cannot bid for the project within this budget. Thanks! ============================================ Hi! I would like to download a custom bootloader to an (Arduino compatible) ESP32 that will protect it against the downloading of new sketches. This could be implemented, in my opin...

    $55 (Avg Bid)
    $55 Avg Bid
    4 bids

    I have a Samsung A105FN with rooted Andoird 10Q and last bootloader u5 unlocked . I wuold like to downgrade to android 9. I saw it's possible with combination file but i need help to do it if it's possible

    $110 (Avg Bid)
    $110 Avg Bid
    3 bids

    Hello, I'm trying to interface on my STM32L496 : a QSPI external Flash memory, FATFs file format, and a USB connection. The final goal is to allow a user to put a binary file on the external Flash memory from his/her PC, allowing a custom bootloader to reflash this binary to the internal memory to finally boot on it. Would it be in your competence to develop this software? Thank you in ad...

    $589 (Avg Bid)
    $589 Avg Bid
    8 bids

    Hello, i need someone experienced with kernel bootloader to modify an existing project to make it compatible with a specific operating system. Requirements: High experience in assembly. High experience in OS architecture.

    $562 (Avg Bid)
    $562 Avg Bid
    4 bids

    I am building a new IoT product on a PIC32MK1024GP with a modem, GPS and various IO. I am an experienced firmware programmer, but the PIC32, XC32, MPLAB IDE, etc. is all new and I need some support from time to time to figure out problems or ask advice. Currently I have a bootloader that can load an application through serial or through an OTA update. We also need to be able to update the bootloa...

    $25 / hr (Avg Bid)
    $25 / hr Avg Bid
    4 bids

    Develop a circuit with the following functionalities. - ATSAMD21G18 incl. adapted Arduino bootloader and documentation - 3x RS232 connection using the MAX3232 - At least six GPIO ports - Input voltage: 12 V - TCXO with at least 2.5PPM The circuit should be designed incl. PCB in Eagle and the components incl. order number should be listed at Mouser or Farnell. In addition, a prototype PCB is to b...

    $1403 (Avg Bid)
    $1403 Avg Bid
    22 bids

    We are looking for to implement FOTA. Through FTP or MQTT we are going to send the .bin file, that could be stored in SD/external Flash. then by using IAP (bootloader) we are planning to write the code in controller flash. Controller : STM32F103C8T6

    $251 (Avg Bid)
    $251 Avg Bid
    2 bids

    I'm looking for a professional in programming with stm32 Discovery Board. the frequency range of audio signals extends from around 20 Hz to around 20 kHz. Output signal tones such as end of program, EAP-Tone etc. via internal loudspeaker (approx. 2-5W). Volume and tone can be adjusted via software and can be saved in the EEProm Serial commands -> USB to UART -> FTDI232 baud rate 3840...

    $190 (Avg Bid)
    $190 Avg Bid
    2 bids

    I need a specialist to help me unlock the bootloader of a Huawei P9 Lite as well as some help in order to install TWRP and a custom ROM. The phone is needed for testing. All procedures have to be documented and delivered to me along with the links of the zip files that will be used. The job will be done using either Anydesk or Teamviewer through my computer.

    $20 (Avg Bid)
    $20 Avg Bid
    1 bids

    hi, i search for someone who is good on CANBUS i need the bootloader DATA form the canbus logs.

    $470 (Avg Bid)
    $470 Avg Bid
    2 bids

    We need a developer to quickly build a custom OS image for raspberry pi for a programming and QC jig for an electronic device we make. The raspberry pi will need to boot up into the application automatically. Once it boots there should be 2 buttons: 1) Run QC Test 2) Flash Firmware Each of these has a set of steps that are required: Run QC Test will do the following: 1) Detect an arduino based de...

    $552 (Avg Bid)
    $552 Avg Bid
    10 bids

    I need a specialist to help me unlock the bootloader of a Huawei P9 Lite as well as some help in order to install TWRP and a custom ROM. The phone is needed for testing. All procedures have to be documented and delivered to me along with the links of the zip files that will be used. The job will be done using either Anydesk or Teamviewer through my computer.

    $10 - $30
    $10 - $30
    0 bids

    I want to build a bootloader for stm32f446re board where it will be used for updating firmware over OTA and via the NFC.

    $459 (Avg Bid)
    $459 Avg Bid
    4 bids

    We're trying to secure the bootloader in Pixhawk device. Anyone with knowledge in bootloaders or Pixhawk is required for consultation (Paid)

    $154 (Avg Bid)
    $154 Avg Bid
    2 bids

    See the attached documents. I have the schematic and a system overview. I will be using an Arduino nano with the old bootloader style board.

    $399 (Avg Bid)
    $399 Avg Bid
    37 bids

    We are using. PIC18F26K22. Pic18F46k22. we want to do an over the air firmware update of the PIC using BT module connected to it. We will have a 2 applications. Master app. Will load a hex file. Encrypt it. Then can be emailed to client. (App can be mobile or desktop based. Does not matter). Client app. Client receives the encrypted (hex) file. the app connect to the pic controlle...

    $966 (Avg Bid)
    $966 Avg Bid
    8 bids

    Bootloader for application updates over USB. Application to be configurable by PC software (we can do this, or you can design this too). PC software to be able to set addresses, bit location to activate outputs on the PCB.

    $6047 (Avg Bid)
    $6047 Avg Bid
    5 bids

    I want a software through which i can easily unlock any android phone's bootloader unofficial but with owner permission

    $12 / hr (Avg Bid)
    $12 / hr Avg Bid
    3 bids

    Hello. I had to manually replace all the files of an ubuntu server installation with the old files I recovered from the dead disk, I now need the grub bootloader to be able to recognize these new files. Attached is the screenshot of the error. Winning bid will need to work thru my computer using teamviewer or anydesk, no other options.

    $25 (Avg Bid)
    $25 Avg Bid
    2 bids

    Need a bootloader for an STM32F405RGT6 -Processor: STM32F405RGT6 -Firmware flashing from: SD card in FAT32 format via SPI with no card detect pin (with binary file named "firmware") -Rest of memory left for the firmware being flashed -If firmware is flashed from SD, the [login to view URL] file becomes [login to view URL] once flashed -No status LED's as all pins are utilized -Crys...

    $207 (Avg Bid)
    $207 Avg Bid
    6 bids

    We have 2 devices (already existing): A master device (pcb) with an ESP32 with a CANBus on it. A slave device (pcb) with a ATmega328 also with a canbus on it. The canbus is linked together and can talk to each other. We want to have a bootloader / sw that can be used for updating the atmega328. The firmware can temporary be stored on the ESP32 spiffs and send over canbus to the ATmega. If possib...

    $1012 (Avg Bid)
    NDA
    $1012 Avg Bid
    11 bids

    System: Arduino Mega 2560 / ATmega2560 with GSM SIM900 attached Needed: FOTA Suggestion, what I would need: - Bootloader capable for FOTA (maybe most important part) - Firmware to integrate into my main project for handling the firmware download from the website via the SIM900 (the hex-file output by Arduino IDE) (medium important) - Rewrite the firmware with the downloaded new version (important...

    $738 (Avg Bid)
    $738 Avg Bid
    11 bids

    PIC32MM developer. I want to implement OTA, using BLE, in my system that uses PIC32MM. Deliverables: Bootloader App mobile to test update firmware ... maybe could be used the source code on the link below. Could be used EZBL [login to view URL] See the link with another example: [login to view URL]

    $302 (Avg Bid)
    $302 Avg Bid
    5 bids

    I need you to develop some software for me. I would like this software to be developed for Linux. #!/bin/sh echo --------------------------------------------------------------------------------------------echo THERE ARE 10 PAUSES IS THIS SCRIPT SO LOOK FOR PROMTS FOR YOU TO HIT ENTERecho --------------------------------------------------------------------------------------------echo [*] BEFORE WE ...

    $16 (Avg Bid)
    $16 Avg Bid
    1 bids

    I am looking to hire someone who is familiar with programming STM32 microprocessor for motor control application. The applicant must be familiar with bootloader and OTA update.

    $819 (Avg Bid)
    $819 Avg Bid
    22 bids

    I'm looking for someone who can develop an ethernet bootloader using Atmega1284 and W5500 with the arduino framework. The code mustbe 100% functional and easy to embedded to others application. I need the souce code to embed at my main application and some support if needed. What we expect: 1) A web server with forms embedded at arduino, where the user can select the file .BIN file and POST...

    $309 (Avg Bid)
    $309 Avg Bid
    3 bids

    Atmega2560 FOTA => GSM SIM808 + SPI Flash I have an ATMega2560 with an SPI Flash memory (AT25M02) and I want to do an OTA bootloader. The ATMega2560 main program is written using Arduino. It is need downloading the new binary firmware from the web and saving it on the Flash Memory. and need to writing a custom bootloader to program the mega and then reboot it. I've exported the Intel ...

    $730 (Avg Bid)
    $730 Avg Bid
    12 bids

    The goal is getting the UF2 bootloader up and running with the SAMD21 Xplained pro development board or a custom SAMD21 board in Atmel Studio various milestones include, adding in features to the bootloader including sleep and wake code, customization of presented mass storage files (txt logs, bitmap image, icons, other filetypes), simple routines for hiding and showing files in the mass storage ...

    $472 (Avg Bid)
    $472 Avg Bid
    8 bids

    I want an implementation of aes in at-mega2560's bootloader. Also, I want to explain me in complete how: 1. I can pass the key in the bootloader 2. I will lock the bootloader, in order nobody can read the key 3. I will encrypt the code 4. I will update the code In general, what I want to achieve is in case that somone reads my chip, he wouldn't can make another one same. Also, I want t...

    $216 (Avg Bid)
    $216 Avg Bid
    2 bids

    I need to boot macOS using Clover on VMware workstation pro 16 running on a dedicated server (window server 2019 standard). I access it through RDP I have VMware workstation pro 16 installed Now I need to use Clover bootloader to boot that macOS. to all bidders: Please read and fully understand what I need. Again, it's a VM on Window Server, only accessible through RDP. to the bid winner: ...

    $107 (Avg Bid)
    $107 Avg Bid
    9 bids

    I have a programmer which programs a [login to view URL] have a bootloader which sends the encrypted unique ID of the chip to the [login to view URL] programmer then sends its unique ID encrypted and also the chip unique ID to a server which responds back with the encrypted firmware (I don't know which encryption algorithm is used but mostly AES 128) then the programmer sends the encrypted fi...

    $250 (Avg Bid)
    $250 Avg Bid
    1 bids

    I want someone who is good in implementing bootloader and can work on tc387 controller and implement the following features, Support CAN based UDS protocol o Support NVM for internal Flash – EEPROM emulation o Support primary & secondary Bootloader mirroring, the secondary bootloader is downloaded in RAM memory by the primary bootloader o Support portioned flashing o Support software...

    $1025 (Avg Bid)
    $1025 Avg Bid
    2 bids

    I want to use arduino as HID keyboard and joystick. I want to toggle it with a switch. Complete details in chat.

    $82 (Avg Bid)
    $82 Avg Bid
    5 bids

    Hello, I have a order to write code (bootloader) for the Arduino Micro Pro, which in Windows would be displayed alternately as a keyboard or as a joystick - not simultaneously.

    $160 (Avg Bid)
    $160 Avg Bid
    3 bids

    I need a developer to unlock the bootloader got a Redmi Note 8T - the miunlock tool is not working flawlessly and i need a secondary method for development purposes. ideally the method Mi uses on there other devices via CMD.

    $333 (Avg Bid)
    $333 Avg Bid
    2 bids

    I need some to help me to install bootloader in my arduino board.

    $3 / hr (Avg Bid)
    $3 / hr Avg Bid
    7 bids