Underground cable laying trenches autocad drawings jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    68,162 underground cable laying trenches autocad drawings jobs found, pricing in USD

    Requirement: this is 2 and half story duplex-type villa. The Cad file has complete architecture drawings for two attached duplexes. The scope of this project only covers one duplex which is the one that has swimming pool. Through this report we have identified décor and furniture for each part of the villa. The requirements are as follow: • Complete interior design to the villa by cons...

    $586 (Avg Bid)
    $586 Avg Bid
    87 bids

    I am planning to construct Commercial Project in Trichy. I need your full civil/architectural / Structural / MEP design works from you. It is a little project but so I want to do proper design before awarding to any civil contractor. Total Plot Area 3000 Sq Feet. East to West - 37 Feet and North to South Upper side 75 Feet I need the complete design including plan/elevation design drawings for ...

    $901 (Avg Bid)
    $901 Avg Bid
    6 bids

    I am planning to construct Commercial Project in Trichy. I need your full civil/architectural / Structural / MEP design works from you. It is a little project but so I want to do proper design before awarding to any civil contractor. Total Plot Area 3000 Sq Feet. East to West - 37 Feet and North to South Upper side 75 Feet I need the complete design including plan/elevation design drawings for ...

    $912 (Avg Bid)
    $912 Avg Bid
    5 bids
    wires n cable 6 days left

    I need some help with finding some leads.

    $14 (Avg Bid)
    $14 Avg Bid
    3 bids

    I'm looking for experienced SketchUp designer to create a 3d model based on my 2d ideas provided in vector format. the model should be placed in a provided model of an apartment. You should be able to generate simplified technical drawings for the unit.

    $119 (Avg Bid)
    $119 Avg Bid
    41 bids

    MEP System design (drawings, reports, BOQ, details, schedules) required for a private project as per the below details: Land Area is 4500 [login to view URL] Footprint Area 2100 s.mtr. Contains one Mail Villa 800 [login to view URL], 2 Villas each is 250 [login to view URL], 2 Villas each is 289 s.mtr. Creation Building 320 s.mtr.

    $555 (Avg Bid)
    $555 Avg Bid
    13 bids

    Read PDF for complete instructions

    $25 (Avg Bid)
    $25 Avg Bid
    5 bids

    I am a interior designer with good touch in 3dx max modelling and realistic [login to view URL] than that I now Photoshop . autocad . For work DM me

    $14 (Avg Bid)
    $14 Avg Bid
    1 bids

    I have an excel with a code (a drawing generator) that I copy in AutoCAD. I need to add few lines of code to add in the drawing some lines, leaders and text.

    $113 (Avg Bid)
    $113 Avg Bid
    15 bids
    Trophy icon First Responder 1 6 days left

    I am looking for a picture of a EMT responder kneeling over someone who is hurt tending to his injuries. In the back ground I want an American flag and the EMT ambulance. I want it to look with the EMT and patient first in the picture with the EMT ambulance in the back ground over either shoulder and both pictures laying over the flag (like the American flag is in the back ground, please see attac...

    $100 (Avg Bid)
    Guaranteed
    $100
    0 entries

    Dear all, The job is about converting 12 files (SLDPRT and SLDASM) from Solidworks 2019 to Solidworks 2018 format, i.e. just open the files with Solidworks 2019 and save it again as previous version . Or else, import the STEP files (attached as [login to view URL]) in Solidworks 2018 - it will work also. Features need not be editable. The first one to provide the files wins the contest. Thank...

    $10 (Avg Bid)
    $10
    2 entries

    I want to get the attached drawings into and editable version so I can edit the drawings

    $25 (Avg Bid)
    $25 Avg Bid
    41 bids

    We are looking to build a device which will convert IPTV to DVB-T. The device will connect to a cloud server where it will pick up a specific details about the MUX-multiplex(frequency, modulation & other details) + a channel list which will be sent to a specific devices, so each connected device will have a specific parameters. The device will accept TV channels from cloud server on ethernet p...

    $8800 (Avg Bid)
    $8800 Avg Bid
    10 bids

    we are looking to build a website for external users to access our product documentation easily, with different levels of access and downloads. within the website there will be calculators that need to be built, quoting systems and email functionality. Log in only required for higher level items, Quoting and calculators index tree/drop downs Simple to use data Sample GREASE ARRESTORS - Brochu...

    $367 (Avg Bid)
    $367 Avg Bid
    145 bids

    Presentation boards, board 1: Three perspective shots of a small building 120 sq. m. ( birds eye with site and two eye level perspectives. Board 2: Two perspectives of outdoor walkway i want to enclose with curtain wall, one for full walkway track and one for part of the walkway only. Text will be provided along with 2d drawings

    $918 (Avg Bid)
    $918 Avg Bid
    63 bids

    Please bring a JDSU tester (or any tester that can do the same) for us to conduct RFC test. Also, please provide a tech that is capable or has experience in doing RFC testing. Other things to bring: Laptop, RJ45 cable. You should be from Ireland for this job

    $15 - $25 / hr
    $15 - $25 / hr
    0 bids

    Create 8 3D visualizations. New construction project with 4 detached houses. The architect has created simple drawings. From these you should create 4 exterior visualizations including the view with the terrain. 4 visualizations from the inside (1 living area, 1 wet room and 1 bedroom each)

    $404 (Avg Bid)
    $404 Avg Bid
    21 bids

    i need realistic and creative 3D design and visualization for the attached drawing. this drawing is what I have. there is no AutoCAD drawing.

    $192 (Avg Bid)
    $192 Avg Bid
    68 bids
    Create a Flyer Design 6 days left
    VERIFIED

    I am looking for a A4 Tri Fold flyer design. I have attached a word document with the information needed in it. The company details are as follows: 10 Cable Street Avon Industrial Area Dundee Kwa Zulu Natal 3000 Tel: 034 940 0328/0329 [login to view URL] email: info@[login to view URL] On the front page it must say: "Your Route to Success" Coinit is an asset managemen...

    $279 (Avg Bid)
    $279 Avg Bid
    113 bids

    Hi Vladan I want to talk with you to see if you can make some 2D drawings for us Have a nice day

    $10 (Avg Bid)
    $10 Avg Bid
    1 bids
    1014 villa structural design 6 days left
    VERIFIED

    Required structural design , calculations , detailed drawings , outline specification and bill of quantities . 3 story villa total built up area approx 450 m2

    $337 (Avg Bid)
    $337 Avg Bid
    19 bids

    Hi Looking for someone with parts design experience. Have to redraw & finalise a prototype design in AutoCad. I also need 2D paper model with dimensions, very important - a solid model and step files. Fusion 360 converted STL and OBJ files available. If you're not 100% sure if you can produce, please don't waste my time. Be prepared to sign NDA

    $26 / hr (Avg Bid)
    $26 / hr Avg Bid
    36 bids

    Hi Looking for someone with parts design experience. Have to redraw & finalise a prototype design in AutoCad. I also need 2D paper model with dimensions, very important - a solid model and step files. Fusion 360 converted STL and OBJ files available. If you're not 100% sure if you can produce, please don't waste my time. Be prepared to sign NDA

    $121 (Avg Bid)
    $121 Avg Bid
    15 bids

    AutoCAD Projects

    $1 / hr (Avg Bid)
    $1 / hr Avg Bid
    1 bids

    I need a clasp type of joint between two surfaces of two solid ABS hemicylinders of similar dimensions. Criteria: attach fast, detach fast, minimal chance of accidental detachment. You can use any existing technique that fulfils these needs. Dimensions when we discuss. If you can do this, then I need STL and STP and 2 d drawings of the whole thing

    $24 (Avg Bid)
    Featured
    $24 Avg Bid
    6 bids

    I need a clasp type of joint between two surfaces of two solid ABS hemicylinders of similar dimensions. Criteria: attach fast, detach fast, minimal chance of accidental detachment. You can use any existing technique that fulfils these needs. Dimensions when we discuss. If you can do this, then I need STL and STP and 2 d drawings of the whole thing

    $29 (Avg Bid)
    $29 Avg Bid
    12 bids

    I have a plastic part for a device that I need an stl file , stp file and a line diagram to be created for. This is a very simple, and basically involves two pieces connected by joint similar to the side release clasp used in belt buckles. $30 budget. NO BIDS FROM INDIAPAKISTAN.

    $21 (Avg Bid)
    $21 Avg Bid
    10 bids

    Having a experience of 3 years in machine designing (automation) and I’m using SOLID WORKS and AutoCAD

    $50 / hr (Avg Bid)
    $50 / hr Avg Bid
    1 bids

    I would like to self publish a children's book and need illustrations. I prefer lifelike drawings not stylized or cartoon. I have attached the story.

    $317 (Avg Bid)
    $317 Avg Bid
    45 bids
    Revit Modelling 6 days left

    We would like to hire a Revit draftee to help us develop models for our fibreglass products. There will be two parts in this job: 1. Handrail Product Guide (refer to attached) All drawings marked with red ticks on page 8 to page 18 2. Ladder Product Guide (refer to attached) All drawings marked with red ticks on page 8 to page 16 Output will include all family files and other related files (as re...

    $1228 (Avg Bid)
    $1228 Avg Bid
    4 bids

    Hi, I'm looking for the right developer to help me build out an online IT school. I have the theme from ThemeForest and I'm working on the outline for the page layouts. This theme has multiple different pages inside of it and I want to cut and rearrange everything. Here is the theme link: [login to view URL] Step1: This will be an ongoing project and the first part will be to get eve...

    $12 / hr (Avg Bid)
    $12 / hr Avg Bid
    100 bids

    Namazone Services: Media Digital Marketing Software Development Power Backups New Office System Setup Server Solutions Network Cabinet And Network Tools Telecommunications And Structured Cabling CCTV Cameras And Equipments Annual Maintenance Contract Cisco Products Copper And Fiber Optic Cable And Accs Namazone Networks Limited Corridor Area, Arusha - Tanzania [Removed by Freelancer.com Admin fo...

    $280 (Avg Bid)
    $280 Avg Bid
    33 bids

    I would like to have plans prepared for a concept home. - I will provide dimensions, and a sketch of the basic layout. Using standard openings, cabinets, etc. Simple Container Home comprised of two 40’ high cube containers.

    $105 (Avg Bid)
    $105 Avg Bid
    36 bids

    Description Manage the activities of internal operationsto ensure proper planning, communications and implementation of solutions. Communicate with team along with requirements to achieve project results. Perform critical path analysis for projects to calculate, identify and manage aspects of the deployment and mitigate risk. Resolve and/or escalate issues in a timely fashion. Ability to con...

    $1041 (Avg Bid)
    $1041 Avg Bid
    3 bids

    In need of about 15 changes to Residential home plans. Includes updates to the electrical, foundation and staking plan. Must have current version of AutoCad.

    $163 (Avg Bid)
    $163 Avg Bid
    16 bids

    Make a prototype project on autocad to present it at my factory

    $131 (Avg Bid)
    $131 Avg Bid
    27 bids
    Trophy icon Baseline logo 5 days left

    We need a logo design for our new project baselineagents.com. We work mainly with football, handball and basketball players in Europe but also open to manage any professional sport player. WE offer: Proffesional Accurate Fair Management, medical cover for our players, financial and legal help. Our Logo should be something straightforward but professional NO JOKES NO KIDDY DRAWINGS

    $100 (Avg Bid)
    Guaranteed
    $100
    215 entries

    I require a siteplan and houseplan to be redrawn from old drawings, so that modifications can made for upgrades and remodelling. Revit must be used, deliverables must be in a format that Revit 2020 can be used to do future alterations and changes. Examples or deliverables are provided, as well as snippet of old plans to be used. Freelancer needs to be familiar with typical building standards ...

    $414 (Avg Bid)
    $414 Avg Bid
    47 bids

    This project involves a true-to-scale 2d drawing of a house with a CAD. Basis for this are two sketches with dimensions drwan by hand. The drawings are CAD drawings of the floors and a section of the house as a whole with dimensions. You supply cad files in a common format (dxf). ---------------------------------------------------------------------------------------------------------------------...

    $107 (Avg Bid)
    $107 Avg Bid
    39 bids

    Most important notes: Please submit your offer if you MEET ALL THE FOLLOWING REQUIREMENTS: 1- you are registered company and have past big projects. sorry to say that any offer from persons or small teams will be ignored, with appreciation to all. 2- Please submit similar (or near field) projects you done. we mean complex projects have complex admin panel, user levels, complex team and content ...

    $35337 (Avg Bid)
    $35337 Avg Bid
    31 bids

    Greetings Khabib, I am hacking a very old DNA synthesizer I bought on ebay using an Arduino controller and am interested in having you modify an old Python program I have for photochemical pattern generation. The old Python program is for photochemical mask generation and can be used for combinatorial oligonucleotide array synthesis. I want to link the existing Python program to the old DNA synth...

    $250 (Avg Bid)
    $250 Avg Bid
    1 bids

    I need around 100 drawings that illustrate points mentioned in questions that pertain to driving rules and to the written part of the driving test (US). I am looking for original art, not google art. No bids from indiapak region please. Budget is $1 per drawing.

    $46 (Avg Bid)
    $46 Avg Bid
    15 bids

    Looking for someone to assist with conceptualising new product and creating a 3D render with guidance through communication and initial drawings/ sketches / photos to [login to view URL] develop into further product range but at this stage it is just one product that is a metal object. Please provide specific job related examples of other similar projects you've worked on.

    $301 (Avg Bid)
    $301 Avg Bid
    12 bids

    Design Engineer and CNC Programmer Metal forming and Sheet metal designs. Metal doors. Balusters for stairs. Auto Parts & Accessories, Auto Cast & Production Lines, Sheet Metal, Home Decoration & All Laser Works Autocad-Solidworks-Corel -flex-art cam

    $397 (Avg Bid)
    $397 Avg Bid
    18 bids
    Auto CAD designs 5 days left
    VERIFIED

    Shop drawings for countertops Steel brackets load calculations

    $105 (Avg Bid)
    $105 Avg Bid
    50 bids
    Trophy icon I need a Logo Designer 5 days left

    This is for my new WINE Website, Underground Wine Merchants - [login to view URL] Truthfully, I have no idea what I want - classy - fun - no idea, so I"ll trust you to take a look at the site and submit what you think works. Thanks - and good luck :) Jeff

    $60 (Avg Bid)
    Guaranteed
    $60
    73 entries

    Hello, I need you to make me furniture shop drawings . Beds, sofas, arm chairs...etc. 2D and 3D modeling . All details must be included for manufacturing Thanks. Amr.

    $20 (Avg Bid)
    $20 Avg Bid
    1 bids

    Yes I just started my own company it is going to be a clothing line for bikers I am trying to design the logo for the company and need help I would like the words I BadBikerz egg that are in a tribal font to be at a arch with some tribal drawings off to the side and underneath I need the logo to be in a two-tone color design that can be changed as most of my designs will be transferred to e...

    $500 (Avg Bid)
    $500 Avg Bid
    1 bids
    $130 Avg Bid
    1 bids

    I have a site that another developer converted from APS for me. He made a custom theme that is based on WP 2019 theme but has a number of things disabled like Jquery and some Javascript. Also theme uses a custom footer rather than the built in WP menus for the footer. I would like as many as possible of the default WP 2019 options to be fixed so that the site is easy to manage for a non develo...

    $175 (Avg Bid)
    $175 Avg Bid
    90 bids