Usb memory write protection software jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    7,446 usb memory write protection software jobs found, pricing in USD

    We are a Fire Protection Design and Consulting company with over 20 years trade experience. We are looking for a certified engineer in Ontario, Canada, to review and stamp fire protection drawings and backflow prevention submittals. We are not looking to “purchase” a stamp. We operate with integrity and professionalism. The right candidate will be

    $256 (Avg Bid)
    $256 Avg Bid
    2 bids

    ...like to develop a simple USB game controller for Windows. I understand this is very simple to do with hardware such as Arduino atmega32u4. I have successfully created a controller using Arduino Pro Micro, however, Windows reads the controller as Arduino Micro. I would like to hire someone who can write software on a single write microchip, so when the

    $250 (Avg Bid)
    $250 Avg Bid
    10 bids

    ...new software installed by technitians that don't know anything about linux. Therefore I need help to create a Bash script for a USB-drive that autoruns on insertion of the USB drive, set proxy settings for apt (/etc/apt/apt.conf.d/95proxies), upgrades the machine and then install software listed below. Script functionality: - Autorun when USB drive

    $100 (Avg Bid)
    $100 Avg Bid
    1 bids

    Just one function Transfer file (e.g. .png or .jpg) to Android SD card via OTG use, this OTG will connect to GPIO of Raspberry Pi to Android device connector via USB OTG. Raspberry Pi will run by Debian system or Ubuntu. It will trigger by one physical button which connected to GPIO. Once GPIO level is high, procedure will be started to transmit files

    $135 (Avg Bid)
    $135 Avg Bid
    7 bids

    ...connected to the custom device with its own USB cable. Custom device will receive that input and modify the input. The modified input will change it so if the left mouse click is pressed and held, it will continiously click at a set speed in the code. Custom device will then get that changed output following with a USB and it will be connected to the PC.

    $211 (Avg Bid)
    $211 Avg Bid
    6 bids

    I need to link receipt printing of Odoo's POS to an USB Serial ESC command receipt printer on Android, the documentation of the printer has attached below, the SDK (.jar file) will be provided.

    $70 (Avg Bid)
    $70 Avg Bid
    1 bids

    Need C# expert who has experience in ...data hooking. I want to capture print data which is sent to printer through LPT port or USB. UI is not important, You can show capture data in simple form. I want logic code mainly. if you're confident in this field, please bid for me. My budget is 50$. You must write "Capture" tag at a head of your bid message.

    $110 (Avg Bid)
    $110 Avg Bid
    6 bids
    Reading PJL in USB printers 3 days left
    VERIFIED

    We need a project that reads USB printer information using PJL commands, @PJL INFO PRODINFO and @PJL INFO PAGECOUNT. The application will only read on USB printers only! No readings will be made on the network printer! The code should be done in Visual Studio so that our programmers can enter the code in our project.

    $451 (Avg Bid)
    $451 Avg Bid
    9 bids
    Trophy icon Logo for a usb cable company 6 days left

    I need a 3d logo for a company that seel USB-c cables, it must have a monkey and something that is similar to USB cable. I need a black background and something innovative a project. the name of the website is [login to view URL]

    $181 (Avg Bid)
    Guaranteed Sealed
    $181
    85 entries

    logo email contact details my company name will be Active Fire Protection

    $220 (Avg Bid)
    $220 Avg Bid
    23 bids

    ...connected to it, and we need a command line and GUI software set up that can reserve and send fax messages (send files as well as text) We don’t need you to develop this, just need to install and configure a existing software. We try to configure hylafax but could not get it to work. Here is the external USB fax modem we are using: https://www.amazon.c

    $19 / hr (Avg Bid)
    $19 / hr Avg Bid
    3 bids

    Dear All, I am looking for someone who can develop a video player that can support a high security that includes the following feature: 1. The Desktop application can be run in one PC only 2. The Desktop Application requires username and password Authentication 3. The Desktop Application support watermark 4- The Desktop Application supports encryption 5- The Desktop Application prevents screen ca...

    $617 (Avg Bid)
    $617 Avg Bid
    17 bids

    more details will be given in the chat and if you cant do and also start working instantly please dont place bid on this project, its a small task

    $24 (Avg Bid)
    $24 Avg Bid
    4 bids

    We have memory leak issues in your Java app which is growing after each iterative web service call, we need someone to go through the code with us and identify the issues so we can address them. This will require the freelancer to be on a gotomeeting call with us where we will show the code and allow the freelancer review and analyze it.

    $162 (Avg Bid)
    $162 Avg Bid
    10 bids

    I have a HID based USB caller id device which i want to use to get caller id on my pstn and inject the callers number and date and time in mysql database . If you can do that please bid this will be only on centos7 linux environment and it needs to run 24/7 on the server if it fails anytime it needs to try and reconnect or send failur email to admin/root

    $135 (Avg Bid)
    $135 Avg Bid
    6 bids

    Hello, I am looking for someone who...someone who can buid a SIMPLE bash script, the script must be able to encrypt a USB partition (all the partition) and decrypt with a PGP key. I must be able to launch like this : ./[login to view URL] --uuid (usb key) --pgpkey --encrypt/decrypt if the pgpkey is good the mount usb key and decrypt if pgpkey then error message

    $29 (Avg Bid)
    $29 Avg Bid
    6 bids

    ...simulates a few of the steps an operating system takes when managing system memory and allocating it to processes by using paging and virtual addresses. Processes will enter the system requesting a fixed amount of memory. The simulator will allocate the appropriate number of physical memory frames to the process, create a page table for that process, and update

    $175 (Avg Bid)
    $175 Avg Bid
    13 bids

    Syn Flood And Ddos Protection Linux Host Ovh Dedicated Computer

    $62 (Avg Bid)
    $62 Avg Bid
    7 bids

    I need an Android apk .so file modded for in house use only. I have successfully decompiled and found many of the addresses and values, but I don't have the skill to finish what I want to do correctly. But, it is entirely doable for someone like you.

    $476 (Avg Bid)
    $476 Avg Bid
    25 bids

    Language :- C++ As the title says, I want to use memcpy to copy the data (array of bytes) of a specific address of a program's memory and put it into a local char array.

    $24 (Avg Bid)
    $24 Avg Bid
    10 bids

    I need DDOS protection for my server and domain, i have installed CSF previosly but it disappeared few weeks ago. Reinstallation of CSF and security measures that can stop/block the current DDOS attack on the server and hardening tweaking VestaCP security I use PHP-FPM with Nginx in Centos 7 and PHP 7.1 I have already changed the port for SSH and

    $32 (Avg Bid)
    $32 Avg Bid
    7 bids

    I need a code snippet in C# that lists all memory addresses that a process has access to read. It should not involve scanning and checking each address and should be almost instantaneous to generate. Very similar to the list that the Sysinternals VMMap provides.

    $20 (Avg Bid)
    $20 Avg Bid
    10 bids

    ...setup a Rpi3 with a USB webcam(Not RPiCam) in her studio, that would allow her to record audio/video her routines by controlling the Start/Stop of USB Webcam via a Webpage. and/or by a button connected to the GPIO of the Pi. Ive found similar projects online that only work with the RPI Camera not USB Cameras, that do not work with USB cameras, included

    $163 (Avg Bid)
    $163 Avg Bid
    9 bids

    Necessito de uma powerbank com as seguintes especificações: - Capacidade: entre 2000 e 3000 mAh - Input: USB-C (e se possível com wireless charging) - Output: USB-C e wireless charging - Dimensões: até 9*5.5*0.5 cm

    $2715 (Avg Bid)
    $2715 Avg Bid
    19 bids

    I have a Usb Floppy drive and want it to replicate a tone/song imputed to a program [login to view URL]

    $20 (Avg Bid)
    $20 Avg Bid
    1 bids

    I would like to send data from a memory card through a gsm network to my mobile phone. For exemple, I have a wind calculator in the forest that memorize the wind speed every 30 minutes and store it into a memory card , i would like to recover these data from this memory card through gsm to be sent as sms to my phone. Someone could help me ? Thx

    $187 (Avg Bid)
    $187 Avg Bid
    15 bids

    I would like to send data from a memory card through a gsm network to my mobile phone. For exemple, I have a wind calculator in the forest that memorize the wind speed every 30 minutes and store it into a memory card , i would like to recover these data from this memory card through gsm to be sent as sms to my phone. Someone could help me ? Thx

    $229 (Avg Bid)
    $229 Avg Bid
    6 bids

    See - brief, for DMCA protection

    $348 (Avg Bid)
    $348 Avg Bid
    2 bids

    i have a pcb with mems sensor on it i want to keep it at 150 degree celcius for half an hour. how to do it without damaging it.

    $133 (Avg Bid)
    Local
    $133 Avg Bid
    8 bids

    Hello, i have tinkerboard ...have tinkerboard computer running ARMBIAN OS. i use rdesktop to access my win10 virtual machine on local hypervisor server in local network. i want to connect smartcard and usb device to ARMBIAN and want to use it in my win10 vm. thats your tasks! i will create milestone, but i will only pay if work is finished! thanks.

    $122 (Avg Bid)
    $122 Avg Bid
    7 bids

    My app is very simple: it has a "take" button, when it is...image from your photo galery. And a "show" button: when you press it you show that image into an UIImageView. The problem is that everytime I take and show a new photo, the memory usage will increase, even if the old photo is not shown anymore. You have a screenshot and the source code below:

    $68 (Avg Bid)
    $68 Avg Bid
    17 bids

    Fix secret music session website and phocagallery not showing correctly

    $153 (Avg Bid)
    $153 Avg Bid
    49 bids

    read my complaints here: [login to view URL] Fix my app, send me the new code and the deployable

    $201 (Avg Bid)
    $201 Avg Bid
    12 bids

    SENARIO: I have a quantity of 40 USB thumb drives. I want to divide them into four groups, A, B C, and D. When I plug ANY of the thumb drives in from group A into ANY of the USB ports on the Pi, I’d like it to play video: /Home/Pi/[login to view URL], when I plug ANY of the thumb drives in from group B, I’d like it to play video /Home/Pi/[login to view URL], when I plug...

    $20 (Avg Bid)
    $20 Avg Bid
    2 bids

    ...for you PCB designers who are up tonight. There is a PCB design already done in Altium Designer that contains a USB-C connector in it. This was a TE Connectivity USB connector. All we need you to do is to swap this connector with a Molex USB-C connector, the Datasheet of which will be supplied. All it takes is running Altium and about half an hour to

    $24 (Avg Bid)
    $24 Avg Bid
    32 bids

    My wife is currently using her phon...recording I would like to setup a Rpi3 with a USB webcam in her studio, that would allow her to record her routines by controlling the Start/Stop of USB Webcam via a Webpage. and/or by a button connected to the GPIO of the Pi. Ive found similar projects online that only work with the RPI Camera not USB Cameras.

    $244 (Avg Bid)
    $244 Avg Bid
    10 bids

    Hello Designers I'd like to have my USB stick and a DVD designed. Just need 2 cliparts. Need to be simple

    $21 (Avg Bid)
    $21 Avg Bid
    8 bids

    We (LOYAL PROTECTORS) specialize in personal protection dogs. We sell puppies , youth dogs and adult dogs. we offer obedience training and personal protection training. We specialize in Belgium malinois dogs

    $110 (Avg Bid)
    Guaranteed
    $110
    204 entries

    We want to use usb ports remotely We want a server - client architecture. Server will be a rpi-like device with an usb port. Client will run on windows10 and windows7. Server and client are accessible through LAN. Server and client software should be controlled via API. Main goal of the project is when any usb device is physically attached to pi,

    $163 (Avg Bid)
    $163 Avg Bid
    2 bids

    I need to mirror iPhone screen on any Android device using USB cable Cable. We cannot install the iTunes on the Android device, so the solution might handle this issue it self.

    $413 (Avg Bid)
    $413 Avg Bid
    8 bids

    We have a sbc box (server) running armbian with usb ports. There is a remote user (client) running windows 10. Client and server are on the same LAN. When we attach an usb device into box, we want it to behave like it is plugged into clients computer. We want a software similar to Virtualhere project.

    $575 (Avg Bid)
    $575 Avg Bid
    7 bids

    Hello, I'm using a PIC18F26K22 i need to manage (write/read, edit) data stored in flash memory (AT25SF081) , but i have only 1K ram so is very hard for me manage the external flash , i have 2 sectors availables (64KB each one) and only use 1 of they, so I want some kind of code to manage for me to write/edit/delete to the sector #1 and use sector #2

    $63 (Avg Bid)
    $63 Avg Bid
    1 bids

    Hello, i have tinkerboard computer running xubuntu 18.04 tls. i use rdesktop to access my win10 virtual machine on server in local network. i want to connect smartcard and usb device to xubuntu and want to use it in my win10 vm. thats your tasks! i will create milestone, but i will only pay if work is finished! thanks.

    $174 (Avg Bid)
    $174 Avg Bid
    6 bids

    I have one project where I have to allocate a lot structs but I am getting memory leaks and dont know why

    $25 (Avg Bid)
    $25 Avg Bid
    20 bids

    ...old keyboard that was once sold in the us via monoprice and went out of production years ago. I love this keyboard for various reasons, Black cherry mx switches, usb passthrough, modular usb cable, but mainly because as far as i can tell it is the only keyboard in the world which is TKL and has macros (the roccat ryos pro tkl also does but they arent

    $135 (Avg Bid)
    $135 Avg Bid
    4 bids

    Please see attached file to this project!

    $316 (Avg Bid)
    $316 Avg Bid
    19 bids

    My question will be numerical related to transformer differential protection

    $56 (Avg Bid)
    $56 Avg Bid
    6 bids

    We need a line illustration created for this USB drive to show people how the usb opens. We would also like an arrow added showing how the tab with the chip flips up to open.

    $90 (Avg Bid)
    $90 Avg Bid
    33 bids