Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    42 userspace jobs found, pricing in USD

    I need a linux kernel module that execute a gpg command to decrypt a file. This cannot be done in userspace app, must be done in a module kernel! This is not optional! I will consider the task finished when you show me that the module decrypts the file using the gpg command! The kernel version is 4.9.x or bigger and the platform is ARM.

    $131 (Avg Bid)
    $131 Avg Bid
    5 bids

    ...--- [login to view URL] Ring0 means than code executes in kernel mode. You can do everything with hardware, software, ie. you can control all userspace. You can't simply mark your code as «ring0 code» and make OS execute it. You should write driver instead. Quote from someone on forums: “there is to way to build your

    $250 - $750
    $250 - $750
    0 bids

    I need an expert for my operating system project. In this project, you will create a new version of th...simple intrusion detection system. This system will operate by logging the system calls made by a process in the kernel, while analysis and intrusion detection will be done in userspace. Complete requirements will be shared in the attachment.

    $84 (Avg Bid)
    $84 Avg Bid
    6 bids

    The assignment is in c. You will need experience working with: Monitors, reader-writer problems, semepho...will need experience working with: Monitors, reader-writer problems, semephores, mutex, file system, Memory Management, Disk, Virtual Memory, kernel space development and userspace development Also, you need to be proficient developing in c

    $30 (Avg Bid)
    $30 Avg Bid
    7 bids

    ...features. 4. "Connector" for the new dashboard to communicate with features from our existing virtual tour editor. 5. Along with user login system, develop separation of userspace (where different user's projects are stored in different directory for easier management in the future). 6. Setup databases needed for user management and also data of all

    $527 (Avg Bid)
    $527 Avg Bid
    40 bids

    Hello, Suspend/Restore does not work in Linux on EC2, via kernel suspend, userspace suspend, or TuxOnIce. Would you like to investigate and possibly repair? Only one needs to work.

    $300 (Avg Bid)
    $300 Avg Bid
    1 bids

    Hello, Suspend/Restore does not work in Linux on EC2, via kernel suspend, userspace suspend, or TuxOnIce. Would you like to investigate and possibly repair?

    $300 (Avg Bid)
    $300 Avg Bid
    1 bids

    I need you to develop some software for me. I would like this software to be developed for Linux using C or C++. VPN , kernel and userspace applications development.

    $1186 (Avg Bid)
    $1186 Avg Bid
    16 bids

    require a userspace driver on OSX 10.8+ for a (mostly) UVC compliant camera.

    $2810 (Avg Bid)
    $2810 Avg Bid
    5 bids

    ...-qfn/dp/2362662 All the above have arious examples of existing device drivers either for MXP mbed, a userspace middleware etc....however I would like to access each device via a kernel SPI driver which will trigger "udev" to create the userspace devices in /dev ...which I can then read with python or C etc. From the little I can tell, each driver

    $500 (Avg Bid)
    $500 Avg Bid
    1 bids

    ...We need to build chroot for new users and so we need a script that create the file and directory structure (with hard links) and a script that take it updated. chroot userspace must be able to resolve domains, connect to internet, connect to site and mysql, send email, common file operation. OS is Debian 7 and ubuntu 14.04 (the scripts must run

    $52 (Avg Bid)
    $52 Avg Bid
    10 bids

    A...using Debian Linux and write two tasks. A userspace task and a soft real time task. Documentation for this project will include precise steps to reproduce your installation from scratch. Would like to use a debian CD set to minimal install as the base system. Please see attachment for details about userspace and realtime task requirements.

    $340 (Avg Bid)
    $340 Avg Bid
    4 bids

    I require a driver to control a USB 3.0 xhci driver pci express device from userspace from userspace using the standard uio and libpci libraries. This driver must completely bypass the built in linux stack and access the device endpoints directly. Instructions for disconnecting the default linux driver from a single pci express xhci device must be

    $4750 (Avg Bid)
    $4750 Avg Bid
    2 bids

    ...standard Android-SDK (Java) 2. I have tried to implement /dev/snd/pcmC0D0p as a character device (LKM) 3. I have tried to implement /dev/snd/pcmC0D0p as a character device in userspace via FUSE (shipped with Android) 4. I have tried to hook [login to view URL] & [login to view URL] with GOT/ELF-hook to intercept the mmap()-method. My conclusions so far:

    $1953 (Avg Bid)
    $1953 Avg Bid
    5 bids

    ...Standard-Ausgabe-Gerät für "TinyAlsa", mittlerweile dynamisch!) mit Hilfe eines Loadable Kernel Modul (LKM) 3. Implementierung von "/dev/snd/pcmC0D0p" im Userspace via FUSE (in Android dabei) 4. Hooking/Interception von /system/lib/[login to view URL] bzw. /system/lib/[login to view URL] via ELF/GOT-Hook Und bin jeweils zu folgendem

    $372 (Avg Bid)
    $372 Avg Bid
    3 bids

    Your goal will be to develop a FUSE userspace filesystem for Linux. The filesystem will support all basic operations, including directory listing, file read and write. Authentication will be done over HTTPS (one simple GET request over HTTPS). Directory listing and create/delete/rename/etc file operations will be made over JSON API. File data reading

    $330 (Avg Bid)
    $330 Avg Bid
    1 bids

    Your goal will be to develop a FUSE userspace filesystem for Linux. The filesystem will support all basic operations, including directory listing, file read and write. Authentication will be done over HTTPS (one simple GET request over HTTPS). Directory listing and create/delete/rename/etc file operations will be made over JSON API. File data reading

    $465 (Avg Bid)
    $465 Avg Bid
    2 bids

    Your goal will be to develop a FUSE userspace filesystem for Linux. The filesystem will support all basic operations, including directory listing, file read and write. Authentication will be done over HTTPS (one simple GET request over HTTPS). Directory listing and create/delete/rename/etc file operations will be made over JSON API. File data reading

    $180 (Avg Bid)
    $180 Avg Bid
    4 bids

    ...except from the proxy server. It must not be possible to bypass this as an unprivilidged user, and it must be possible to enable or disable the block on specific ports from userspace. Other implementation ideas welcomed, ipfw seems to be too buggy (lock reversal with uid matching). Full source to be provided, with IPR ownership transferred to us. This

    $1000 (Avg Bid)
    $1000 Avg Bid
    1 bids

    ...except from the proxy server. It must not be possible to bypass this as an unprivilidged user, and it must be possible to enable or disable the block on specific ports from userspace. Other implementation ideas welcomed, ipfw seems to be too buggy (lock reversal with uid matching). Full source to be provided, with IPR ownership transferred to us. This

    $500 (Avg Bid)
    $500 Avg Bid
    1 bids

    ...doesn't support most of the filesystem operations like createFile() or readDir() or whatever, your goal will be to design a protocol which we will use on server side. Your userspace filesystem will just GET or POST over HTTP to a hardcoded URL or URLs where server-side script will be located, which will handle the filesystem requests and return responses

    $758 (Avg Bid)
    $758 Avg Bid
    16 bids

    ...Dokan can be downloaded here: [login to view URL] Basically it provides the necessary kernel-space driver for the virtual drive, and you can focus only on the HTTP userspace code. As you can see at the dokan website, there are also some source codes for sshfs virtual drive, your goal is to implement http virtual drive in a very similar manner

    $1000 (Avg Bid)
    $1000 Avg Bid
    1 bids

    ...am looking to customize btusb.c I want btusb to manage multiple bluetooth dongles, but only present one virtual device to the linux core kernel. It must allow I/0 to userspace as well. So, say we have 3 bluetooth usb dongles connected to a machine. I want each of those to connect to btusb.c. I want btusb.c to manage each of the radios discretely

    $23 (Avg Bid)
    $23 Avg Bid
    1 bids

    The kernel driver should provide both read and write support. You can port code frm linux-ntfs or NTFS-3G but linux-ntfs does not have write support and NTFS-3G is userspace. Look forward to hearing from you.

    $2125 (Avg Bid)
    $2125 Avg Bid
    1 bids

    ...pulses/minute). The board has 6 pins free for GPIO. The board will be connected to electricity or water meters. Each x pulses will be equivalent to 1 kWh. The application will run in userspace but a separated driver with the same functionality is desirable (so any other application can read from the driver the pulses). There should be a way to store the pulses in

    $466 (Avg Bid)
    $466 Avg Bid
    5 bids

    ...read from the IN endpoint a 4Kbyte block and then write to the OUT endpoint the same 4Kbyte block. That has to happen natively from the .sys driver itself and not from the userspace application (as it is right now). Also that reading/writting has to happen on a timely basis through a timer with a period of 1ms. So for every 1ms tick, the driver will

    $165 (Avg Bid)
    $165 Avg Bid
    2 bids

    ...fairly straightforward to follow. Feel free to use either one of the codes to add the additional functionality. Other material required: 1. FUSE: File System in Userspace ([login to view URL])[ ][1] 2. Example of hello world file system ([login to view URL])[ ][2] steps for mounting fuse: 1. Create a

    $30 - $5000
    $30 - $5000
    0 bids

    ...fairly straightforward to follow. Feel free to use either one of the codes to add the additional functionality. Other material required: 1. FUSE: File System in Userspace [[login to view URL]][1] 2. Example of hello world file system [[login to view URL]<wbr></wbr>[login to view URL]][2] steps for mounting fuse: 1.

    $30 - $5000
    $30 - $5000
    0 bids

    ----------------------------- Userspace (GUI) description ----------------------------- Looking for someone who will write a HTTP filesystem driver (client-side application and driver) for Windows. The server-side is already developed. How does the requested software work: - user will run the installer - software is installed in his computer

    $1181 (Avg Bid)
    $1181 Avg Bid
    8 bids

    Linux provides a /dev/hpet interface for userland hpet. I need a program that can be injected/inserted into a binary only program to read /dev/hpet and convert the data into a gettimeofday() format, therefor injecting an alternative gettimeofday() into the binary only program via LD_PRELOAD. I need the gettimeofday() to be either coarse or accurate depending on flags. Ie: LD_PRELOAD=[login ...

    $120 (Avg Bid)
    $120 Avg Bid
    3 bids

    We need implementation of latest FUSE (filesystem in userspace, at least 2.6) compatible API? within Windows XP/2003/2008 environment. This includes implementation of kernelspace <---> userspace linkage writing userspace library and kernel driver part. And this also requires usage of Installable File System (IFS) APIs to implement kernel-space interaction

    $4250 (Avg Bid)
    $4250 Avg Bid
    4 bids

    ...use a userspace helper app, but remember, all crypto must be done in kernelspace! ## Deliverables 1. Kernel patch to provide encrypted binary loading. It must apply cleanly against an ARM 2.6.17 kernel tree that I will supply. 2. Any userspace utilities required to load encrypted binaries. They must compile on ARM. 3. An x86 utility (userspace) to

    $1161 (Avg Bid)
    $1161 Avg Bid
    3 bids

    We need implementation of latest FUSE (filesystem in userspace, at least 2.6) compatible API with additiona of asynchronous calls possibility within Windows XP environment. This includes implementation of kernelspace <---> userspace linkage writing userspace library and kernel driver part. And this also requires usage of Installable File System (IFS)

    $1283 (Avg Bid)
    $1283 Avg Bid
    3 bids

    ...also be nice. overview: i need a linux kernel module that implements a userspace loadable custom firewall filter (using the kernels existing api for custom filters) the loading of this object module should be done using ioctl calls and mapped memory arrays.. the userspace loadable objectfile must be removable and reloadable on demand kernel

    $531 (Avg Bid)
    $531 Avg Bid
    4 bids

    We're after a driver for an Intel PRO/1000 GBE network adapter which runs entirely in user mode - i.e. will not cause any user/kernel context switches in normal use. We need to be able to send and receive small UDP packets at a far greater rate than we're able to using the driver in the kernel, and eliminating the context switching and kernel protocol stack looks like the way forward. ...

    $1275 (Avg Bid)
    $1275 Avg Bid
    4 bids

    I need a i2c driver in linux that access the i2c controlls on a 440GX chip. The driver needs to be able to be access from userspace. ## Deliverables Rent A Coder requirements notice: As originally posted, this bid request does not have complete details. Should a dispute arise and this project go into arbitration "as is", the contract's vagueness

    $1059 (Avg Bid)
    $1059 Avg Bid
    13 bids

    LUFS is a hybrid userspace filesystem framework supporting an indefinite number of filesystems (localfs, sshfs, ftpfs, cardfs and cefs implemented so far) transparently for any application. under GPL License, hosted at <[login to view URL]> My initial project request was posted on the developer mailing list: <[login to view URL]

    $25 (Avg Bid)
    $25 Avg Bid
    1 bids

    LUFS is a hybrid userspace filesystem framework supporting an indefinite number of filesystems (localfs, sshfs, ftpfs, cardfs and cefs implemented so far) transparently for any application. under GPL License, hosted at [login to view URL] My initial project request was posted on the developer mailing list: [login to view URL]

    $30 - $5000
    $30 - $5000
    0 bids

    ...durchzuführen? ich denke so im rahmen von 20-40h im mai. ich benoetige einen DMA test, also die maximale transfergeschwindigkeit von einem PDM pin (input) bis in den linux userspace. HW und xilinx build-server sind vorhanden. ich habe das board (z-turn myr) bis jetzt noch nicht getestet. das input sollte als vivado AXI4lite IP auf der GP clock (100MHz)

    $12 / hr (Avg Bid)
    $12 / hr Avg Bid
    1 bids

    Nous recherche un intégrateur Wordpress pour intégrer des PSD vers un theme Wordpress/Woocommerce nu. Liste des templates: home (avec widget p...recherche un intégrateur Wordpress pour intégrer des PSD vers un theme Wordpress/Woocommerce nu. Liste des templates: home (avec widget panier) product page product category userspace cart checkout

    $573 (Avg Bid)
    $573 Avg Bid
    23 bids

    ...ловит сигнал. Задачи: 1. Настроить, чтобы многопоточное приложение ловило сигнал. 2. Настроить получение прерывания GPIO приложением userspace. Чтобы не драйвер отлавливал GPIO прерывание, а userspace.

    $418 (Avg Bid)
    $418 Avg Bid
    5 bids

    ..."oryginal" powinien nadal bez przeszkod trafic do adresata (aplikacji/modemu), a "kopia" wraz z timestamp z momentu jej przechwycenia powinna byc dostepna w userspace. Obecna implementacja serial drivera nie pozwala na otwarcie wiecej niz jednego handle do serial portu co powoduje, ze sniffowanie przez zwykle otworzenie portu jest niemozliwe

    min $3
    min $3
    0 bids