Vector graphic antenna jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    1,864 vector graphic antenna jobs found, pricing in USD
    Antenna propagations 6 days left
    VERIFIED

    Could anyone give me an idea on how to analyze the antenna propagation with high-performance computing or python? Thanks.

    $29 (Avg Bid)
    $29 Avg Bid
    2 bids
    $150 Avg Bid
    1 bids

    Hi I am building a prototype which integrates Raspberry PI with Xbee and GSM/3G/LTE. I already have the XBee 2mW Wire Antenna - Series 2C (ZigBee Mesh) and Waveshare ARPI600 IO Expansion Board. I need a complete guide for a full integration which also includes having node red to discover the zigbee signal. More info can be made available if you are

    $195 (Avg Bid)
    $195 Avg Bid
    7 bids

    I have an embedded AtMega328 based project with a ready schematic, that needs to be converted to a well-designed PCB layout. Work to be done includes placing and r...well-designed PCB layout. Work to be done includes placing and routing the main components (microcontroller, BLE module , RFID module) as well as the design of a 13.56MHz antenna for NFC.

    $350 (Avg Bid)
    $350 Avg Bid
    39 bids

    Job is to design on board PCB antenna for Nordic's NRF51822 BLE Beacon. Only apply If you have prior experience in the same.

    $114 (Avg Bid)
    $114 Avg Bid
    11 bids

    We have a device that works through a radio antenna, receives digital signals. Those digital signals are data from ships that are nearby. This device works in other iOS, windows and android applications. We have the drivers for windows. We want to create the drivers for our iOS application. thank you

    $924 (Avg Bid)
    $924 Avg Bid
    18 bids

    I'm making a Mifare Reader for one device, i need one antenna to fit in 58mm x 20mm PCB. I'm using the IC MFRC522, and Cadsoft Eagle. I need all dimensions and value for capacitors.

    $50 (Avg Bid)
    $50 Avg Bid
    1 bids

    ...I really need to rush this project At the end of the project, a fully developed system compromising of the following components 1) Raspberry Pi 3 Model V 1.2 2) inAIR9B Antenna 3) Adafruit AMG8833 Breakout Thermal Imaging Camera Interconnected together, should be produced. The objective of the project is to be able to use the Thermal Imaging Cameras

    $367 (Avg Bid)
    $367 Avg Bid
    1 bids

    ...I really need to rush this project At the end of the project, a fully developed system compromising of the following components 1) Raspberry Pi 3 Model V 1.2 2) inAIR9B Antenna 3) Adafruit AMG8833 Breakout Thermal Imaging Camera Interconnected together, should be produced. The objective of the project is to be able to use the Thermal Imaging Cameras

    $517 (Avg Bid)
    $517 Avg Bid
    11 bids

    ...I really need to rush this project At the end of the project, a fully developed system compromising of the following components 1) Raspberry Pi 3 Model V 1.2 2) inAIR9B Antenna 3) Adafruit AMG8833 Breakout Thermal Imaging Camera Interconnected together, should be produced. The objective of the project is to be able to use the Thermal Imaging Cameras

    $441 (Avg Bid)
    $441 Avg Bid
    7 bids

    ...drive, a raspberryPI, and a wifi antenna. We want this hardware encased in a good looking design (that will need to be hollow to make room for the hardware). What I'm thinking is a 3D version of [login to view URL]:[login to view URL] so the drive and server can be in the snake body, and the antenna in the neck. expected output is

    $172 (Avg Bid)
    $172 Avg Bid
    64 bids

    I have a CST file with the results ' Gain + Bandwidth ' , i want to transfer it to HFSS software and get the same result ' Gain + Bandwidth ' as CST..

    $114 (Avg Bid)
    $114 Avg Bid
    9 bids

    We have 2 missions: 1 - Improve SWR on an existing antenna 800-1900Mhz or; if not possible design a new one 2 - create an ultralight ominidirectional 30-512Mhz 10W antenna antenna design 800-95/1700-1800Mhz -AND- 225-512Mhz

    $167 (Avg Bid)
    $167 Avg Bid
    8 bids

    I'm in...5V logic. Lastly I need two more of the three pole ph2.0 connector with the same wiring to operate at 3.3V. I know I said lastly but I just remembered that I will need an antenna on board as well. Please let me know your rate for this project. I also wanted to let you know that this is the first phase of the project there are two more phases.

    $21 / hr (Avg Bid)
    $21 / hr Avg Bid
    14 bids

    Connect antenna rfid to pos terminal nfc payment

    $223 (Avg Bid)
    $223 Avg Bid
    5 bids

    I need PCB antenna gerber file for SIM808 GSM module. I want antenna for GSM/GPRS, GPS and Bluetooth. Is it possible to design all three antenna on same pcb of dimension 50x50 mm ?

    $60 (Avg Bid)
    $60 Avg Bid
    14 bids

    Conducting material - AgHT Substrat...biomedical application but it is not possible to implement implantable antenna so I want to implement antenna which will be used in a receiving device ( getting all information about the patient health which is radiated from implantable antenna).So for implement these types of antenna we requires wide bandwidth ..

    $45 (Avg Bid)
    $45 Avg Bid
    5 bids

    ...want a WiFi tower antenna standing on top of the mountain on the right hand side in the same colour scheme as the logo. Please look at the attached uploaded images for reference and example: - Digital Chaos Logo in landscape formats - Table mountain real photo for reference - Table Mountain Outline guides and examples - WiFi antenna examples You can

    $22 (Avg Bid)
    $22
    23 entries
    Trophy icon Create a brochure Ended

    ...support the main image. You will notice in the link below that this manufacturer provided a product image and then added features such as HD and Free Channels included with the antenna. We would like to highlight the product, which consists of a physical sensor and an app as the main focus of the” Hero Image” but also cleanly include some of the product differentiators

    $175 (Avg Bid)
    Guaranteed Sealed
    $175
    22 entries

    ...amount of electromagnetic waves absorbed by smartphone users. It is an extra fine passive antenna, in the form of a patch, which is positioned very precisely on the back of the mobile phones (with an exclusive positioning tool), with respect to their main antenna location. The FAZUP patch regulates the power emission of the phones and reduces the SAR

    $21 / hr (Avg Bid)
    $21 / hr Avg Bid
    8 bids

    ...This is where you guys come in. For now. I need a Radio app building to interface via the usb touchscreen display. Radio is a monkeyboard Dab keystone device which uses one antenna for both DAB and FM. I need a Radio app that's similar but better looking, more honda type-r-ish if you get my drift. Than the one I have attached to this request. The app

    $27 - $333
    $27 - $333
    0 bids

    ...This is where you guys come in. For now. I need a Radio app building to interface via the usb touchscreen display. Radio is a monkeyboard Dab keystone device which uses one antenna for both DAB and FM. I need a Radio app that's similar but better looking, more honda type-r-ish if you get my drift. Than the one I have attached to this request. The app

    $199 (Avg Bid)
    $199 Avg Bid
    1 bids

    ...greatly reduces the amount of electromagnetic waves absorbed by smartphone users. It is an extra fine passive antenna, in the form of a patch, which is positioned very precisely on the back of the mobile phones, with respect to their main antenna location. The FAZUP patch regulates the power emission of the phones and reduces the SAR (Specific Absorption

    $14 / hr (Avg Bid)
    $14 / hr Avg Bid
    26 bids

    i want Design Smart Antenna In OPNET Can you help me in this Case?

    $500 (Avg Bid)
    $500 Avg Bid
    1 bids

    Personal project . Required to build an waveguide and antenna using openEMS n octave

    $185 (Avg Bid)
    $185 Avg Bid
    1 bids
    $10 Avg Bid
    1 bids

    ...reads the data from each receiver and sends this data to an external PLC (not in project scope) through RS485 communication. The board must be designed to have an external antenna and must be capable of reading multiple transmitters at the same time. The receiver board will be accompanied with SMD LED board, for status indications, to be mounted on the

    $716 (Avg Bid)
    $716 Avg Bid
    14 bids

    ...developing a Radio in C Band which should able to communicate or transfer data between the two radios. Radios shall be comprised of Indoor Unit (IDU), Outdoor Unit (ODU), Antenna System (Comrod/Cobham) , Mast (Comrod). Please feel free to tell me if you can handle it or your expertise was in RF Chip development which is alltogether different. Develop

    $11758 (Avg Bid)
    $11758 Avg Bid
    5 bids

    At the end of the project, a fully developed system compromising of the following components 1) Raspberry Pi 3 Model V 1.2 2) inAIR9B Antenna 3) Adafruit AMG8833 Breakout Thermal Imaging Camera Interconnected together, should be produced. The objective of the project is to be able to use the Thermal Imaging Cameras to detect and count the number

    $283 (Avg Bid)
    $283 Avg Bid
    3 bids

    ...greatly reduces the amount of electromagnetic waves absorbed by smartphone users. It is an extra fine passive antenna, in the form of a patch, which is positioned very precisely on the back of the mobile phones, with respect to their main antenna location. The FAZUP patch regulates the power emission of the phones and reduces the SAR (Specific Absorption

    $1 / hr (Avg Bid)
    $1 / hr Avg Bid
    1 bids

    We have a fabricated RF amplifier IC which need to integrate which RF source, TX and RX antenna. We need PCB designer who have proven experience in RF circuit design and PCB layout design. The circuit requirement are listed as follow, please contact us for detail. - Circuit operation frequency: 2.4GHz - Number of PCB layout: 2 layers - Need to design

    $202 (Avg Bid)
    $202 Avg Bid
    17 bids

    We have an RFID pcb with an antenna and a Pic 16f688 chip on it. To program a T5577 RFID card with 125 kHz, we need a small software. Target of the software: Place a card at the unit, the RFID code 00 00 00 01 gets written. The write process gets proved and the. Buzzer makes a sound. The second card gets the next code 00 OO OO O2 ..... and

    $373 (Avg Bid)
    $373 Avg Bid
    19 bids

    ...to design a 2.4GHz antenna meant to be integrated inside an aluminum case (with openings). You may find a non-exhaustive list of tasks below: - import our current mechanical design in the simulation software of your choice - understand and import our current FR4 PCB into the simulation software - design and optimize an antenna within the available

    $567 (Avg Bid)
    $567 Avg Bid
    17 bids

    Hello Freelancer Community, we are a mobile antenna consulting start-up and we need to have a one-page flyer designed using our logo ( attached) and brand colors. The copy that needs to go on the flyer is attached. It is a short description of our process that we want to illustrate for the customer in 5 simple steps. We expect: - A flyer

    $91 (Avg Bid)
    Guaranteed
    $91
    64 entries
    Trophy icon Design a logo Ended

    ...the sketch as well as a jpg of the exact moth they want in the middle. The writing needs to be at the top: THE NATURE CO. Then the moth (please remove the two straight antenna and elongate the circular one so it looks more like the drawing). Then of (in script like the drawing) then * SALADO * (The asterisks being dots) I will need this file

    $35 (Avg Bid)
    Guaranteed
    $35
    22 entries

    Hi Liu Z., I need to design a circuit that it could receive an electromagnetic wave with a specific wavelength using an antenna. Could you help me? If so, let us talk, please.

    $10 (Avg Bid)
    $10 Avg Bid
    1 bids

    ...of like a spiral antenna. The top and all odd layers are the same pattern. The bottom and all even layers are the same pattern. I have high res graphics in .svg, .bmp and many other formats of the shape needed for the copper planes. But it needs to be imported as .svg if possible because the very small transition steps of non vector images cause very

    $533 (Avg Bid)
    NDA
    $533 Avg Bid
    21 bids

    5G antenna architecture design and signal processing system configuration.. or build a algorithm for signal transmission and reception ..

    $125 (Avg Bid)
    $125 Avg Bid
    5 bids

    At the end of the project, a fully developed system compromising of the following components 1) Raspberry Pi 3 Model V 1.2 2) inAIR9B Antenna 3) Adafruit AMG8833 Breakout Thermal Imaging Camera Interconnected together, should be produced. The objective of the project is to be able to use the Thermal Imaging Cameras to detect and count the number

    $729 (Avg Bid)
    $729 Avg Bid
    7 bids

    the analysis of modulations ( .qpsk ,8psk ,16qam and 64) on MIMO-OFDM system over AWGN,Rician and Rayleigh channels and their effect on BER for high d...MIMO-OFDM system over AWGN,Rician and Rayleigh channels and their effect on BER for high data rates esented. The proposed MIMO-OFDM system with OSTBC using 2x2,4x4and 8X8 antenna configuration

    $158 (Avg Bid)
    $158 Avg Bid
    3 bids

    I would like to fabricate a PCB which the RF output power for N...png". - Electrical characteristic should be within the range provided by 24L01 and MCP01 datasheet (please see attachement) - Corresponding schematic include - built-in RF antenna with acceptable transmission/ receiving (10m range) - Pass DRC and exported Gerber - prefer Altium designer

    $199 (Avg Bid)
    $199 Avg Bid
    22 bids

    I am Krishna. I am based out of Bengaluru, India. I would like to build a 8X8 RF antenna matrix board for Chess. Anyone having expert knowledge on RFID concept and interested to build a prototype can contact me to build together. I am not interested to get this project built without me learning. Please quote your charges.

    $297 (Avg Bid)
    $297 Avg Bid
    8 bids
    Trophy icon Create Logo Ended

    ...cart is controlled remotely. Something like this: [login to view URL] [login to view URL] [login to view URL] Other ideas could also be analysed

    $50 (Avg Bid)
    Guaranteed
    $50
    81 entries

    ...additional memory (Not the must, but best to have something with price constraint and open source resources) 3. I2C and SPI ports for connecting sensors. 4. Inbuilt BLE Antenna and Wifi Antenna (or you can attach some workable modules) 5. Battery powered prototype (any good battery spec within the size limit should be fine) 6. USB port for coding programs

    $481 (Avg Bid)
    $481 Avg Bid
    13 bids

    ...The sides of the wall (left and right of the stairs) seem are rosa. The middle part is white. The part underneath the balcony is again rosa. On one of the pictures two antenna looking poles can be seen on the roof. Those are not needed. I will provide more pictures of the building if I get my hands on more. If you need more details please

    $226 (Avg Bid)
    $226
    23 entries

    ...Which io pins are to be used for the spi bus can be determined by my software. The 32.768 khz crystal connects to p0_26 and p0_27 no copper can be placed under the bt600i antenna. Do you want me to send you the data sheets with the reference circuits. I would like schematic, a pcb design and bill of materials Thank you have fun and take care always

    $174 (Avg Bid)
    $174 Avg Bid
    33 bids

    I would like to have a ESP32 based ...least 4 GPIOs upto 30v with isolation using optocoupler 4. External Antenna with SMA Connector 5. Two Serial Interface Connection other basic requirement will be shared later but before awarding the project. Please only show interest if you have already worked with ESP32, antenna, voltage dividers, optocouplers.

    $403 (Avg Bid)
    $403 Avg Bid
    17 bids

    I've a project to design a pcb which has 220V AC inputs (4), 24V DC inputs (4) 12V DC inputs(2) and digital outputs(4). I need one GSM module, sim card holder, SMA antenna, speaker and microphone pins on the board. Operating voltage of the board should be 24V DC. We can choose microcontroller together and talk in detail about the rest.

    $158 (Avg Bid)
    $158 Avg Bid
    9 bids

    ...used in School for Student Attendance: 1) We need a 125 kHz RFID Reader and Controller which can be installed in School for attendance, it should have an extendable aerial/antenna with wire. 20 CM length, the RFID Reader should be small and should also have a read range of minimum 5 Cm on thin RFID cards. 2) The RFID Reader and controller should send

    $1018 (Avg Bid)
    $1018 Avg Bid
    15 bids

    ...them, they are 3 questions in theory and 1 question need a calculation the calculation question I'm not sure how to solve it to be honest, still struggling with it. its about antenna and propagation. 1. Describe the term Group Velocity and Phase Velocity with respect to the dominant mode of propagation in rectangular waveguide. 2. What is meant by phase

    $64 (Avg Bid)
    $64 Avg Bid
    1 bids