Weight sensor project using mikroc jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    12,009 weight sensor project using mikroc jobs found, pricing in USD

    1. What the deliverable is: png files...company is more to B, we would prefer the designer who is strict. 3. Anything unique about the project or team: Aimed at helping farmers gather accurate and precise on-field information, Deltron engineers an integrated set of analytics software and sensor products. And these are also Deltron's main business.

    $63 (Avg Bid)
    $63 Avg Bid
    70 bids

    Hi, We want to open a project regarding to a special camera module. The camera module should be selectable between area scan and line scan mode. The standard area scan sensors should also be driven as line scan sensor. We want to use standard cmos camera modules as RGB, mono with 2K and 4K horizantal resolutions. During line scan mode we need to reach

    $1 / hr (Avg Bid)
    $1 / hr Avg Bid
    1 bids

    Hi, We want to open a project regarding to a special camera module. The camera module should be selectable between area scan and line scan mode. The standard area scan sensors should also be driven as line scan sensor. We want to use standard cmos camera modules as RGB, mono with 2K and 4K horizantal resolutions. During line scan mode we need to reach

    $1 / hr (Avg Bid)
    $1 / hr Avg Bid
    1 bids

    Hi, We want to open a project regarding to a special camera module. The camera module should be selectable between area scan and line scan mode. The standard area scan sensors should also be driven as line scan sensor. We want to use standard cmos camera modules as RGB, mono with 2K and 4K horizantal resolutions. During line scan mode we need to reach

    $1 / hr (Avg Bid)
    $1 / hr Avg Bid
    1 bids

    I need the following: + Emulate UART Software at maximum 9600 baudrate. +...Emulate UART Software at maximum 9600 baudrate. + Simple library where GPIO pins are specified for RX, TX + Get data packet from the sensor (Specifically Plantower PMS 7003) Code should be well commented and explained. Using HAL and needs to work on STM32L0xx-line of micros.

    $25 (Avg Bid)
    $25 Avg Bid
    4 bids

    ...durability and light weight). by using the following: 1-thermoelectric cooling module (TEC) 2-using solar energy 3-auto start and stop based on temperature and humidity ratio of sensor 4- construction design, best available thermally insulated material for the air channel 5- using least amount of electricity for air flow through duct by using converge...

    $243 (Avg Bid)
    $243 Avg Bid
    6 bids

    Assignment details: Your task is to design a sensor-based system to determine the direction of travel (IN or OUT) of people through a standard sized doorway. 1) What main challenges are present for this application? 2) What sensors and sensory method would you use? Show how your solution would work. 3) Your solution will be integrated into a larger

    $16 (Avg Bid)
    $16 Avg Bid
    2 bids

    ...animated video of our smart underfloor heating product in action. We need to illustrate the radiant heat being activated in different rooms when a person enters. RFID temperature sensor an tracking tags emit wave to the square plate-type antenna on the wall. A cable is shown wired to our Smart Controller in the junction box at the bottom of the wall near the

    $272 (Avg Bid)
    $272 Avg Bid
    13 bids

    ...level (pressure) sensor that also can measure conductance and temperature and send this to a unit on the surface that can record these parameters. No design, prototyping or production is required. I want to buy an aftermarket device and I want to use your contacts of suppliers. I DO NOT WANT YOU TO BUILD OR DESIGN ANYTHING. The sensor can be powered

    $141 (Avg Bid)
    $141 Avg Bid
    10 bids

    (Fun wifi project, Arduino, esp8266-01, with Push Notification.) Brief description: The Slave esp8266-01 when triggered sends message to arduino Nano/Master 8266 to close solenoid & send push notification. Setup the push notification via [login to view URL] Detailed description: Slave Hardware: 1. esp8266-01 2. BC547 transistor/liquid probe 3. 1 led

    $203 (Avg Bid)
    $203 Avg Bid
    17 bids
    Build Algorithms 6 days left

    Need help in building algorithms to identify events from sensor data

    $165 (Avg Bid)
    $165 Avg Bid
    4 bids

    I'm using a sound sensor (Op-Amp LM393) to detect a baby cry. Micro-controller: Arduino Mega Anyone can help with C programming? Or any experienced engineer tried this detection before? Due to tight budget, I can only afford SGD20.

    $15 (Avg Bid)
    $15 Avg Bid
    12 bids
    Coding Sensors 5 days left

    I want someone to program two sensors one for a smart watch the first sensor is for the heart rate and the other one is for temptature degree

    $83 (Avg Bid)
    $83 Avg Bid
    3 bids

    When the MQ2 gas sensor detects combustible gas such as propane / methane => 200 PPM, it triggers the on (1) function and gets the current GPS fix location coordinates and packages this GPS fix location data as a Google Maps hyperlink inside a SMS text message and sends the message to a specified cell number. The program confirms message receipt then

    $624 (Avg Bid)
    $624 Avg Bid
    36 bids

    We need someone to create growth graphs for children (length - head size - weight) Doctor will be adding values every some days for each child and depending on gender the graphs must be automatically generated Here is the data for the graphs [login to view URL] [login to view URL]

    $50 (Avg Bid)
    $50 Avg Bid
    6 bids

    I would like someone to develop for me an android mobile app to locate vacant car parking space in my facilities where I have fitted wireless parking space sensor which detects occupied and unoccupied parking space with online space booking and online prepaid ,debit and credit card payment [login to view URL] to [login to view URL]

    $759 (Avg Bid)
    $759 Avg Bid
    84 bids

    the inductive sensor on arduinp will give its value 0 or 1 according to which servo motor rotates left or right

    $53 (Avg Bid)
    $53 Avg Bid
    14 bids

    ... and am looking to shrink the size of my PCB board. I currently use a custom designed PCB board (using Fritzing software), Arduino Pro Mini 5V 16MHz, Bluetooth HC-05, Pololu's Mini Pushbutton Power Switch with Reverse Voltage Protection, Sound Sensor with Adjustable Gain, On/Off push button, Micro USB adapter, On indicator LED, capacitors and resistors

    $456 (Avg Bid)
    $456 Avg Bid
    44 bids

    I am currently in an R&D phase of a project and after advice from someone with skills and experience in Raspberry Pi 3 data logging with analog inputs and 3G/4G/LTE internet connection to retrieve that data. Can you provide advice on the use of a rasberry pi data logger for water pressure (depth) and temperature and conductance recordings as well as

    $73 (Avg Bid)
    $73 Avg Bid
    6 bids

    Hello. We have developed a new product for strength and conditioning that you only use your body weight but we now require an Instructional app building for the product. We would prefer IOS at this time but android would also be ok. Both systems would be even better! We have also had other ideas about what this app could include but we would need 3rd

    $2149 (Avg Bid)
    $2149 Avg Bid
    51 bids

    I need a 4-5 minutes video about exercises to weight loss. The video must be original and not taken from youtube or other websites. I need a voice over and a music background

    $275 (Avg Bid)
    $275 Avg Bid
    17 bids

    I need you to write some content for a website.

    $107 (Avg Bid)
    $107 Avg Bid
    36 bids

    ...to keep the time instead of the arduino Uno internal clock and I need help with changing the code so that it uses the external clock instead. I will also be adding a light sensor to the underneath of the clock which will sense the brightness in the room and adjust the light of the LEDs appropriately - darker if the room is dark and brighter if the room

    $18 (Avg Bid)
    $18 Avg Bid
    16 bids

    Simple C coding of sensors using Arduino. 1) Sound sensor. 2) Motion sensor. Rewrite my program such that it looks nicer.

    $26 (Avg Bid)
    $26 Avg Bid
    15 bids

    I need react, vuejs, Html expert for small bug fixing in my testing web page of BLE sensor IOT hub. it is very simple but need high skill in web programming. Only bid for experts

    $139 (Avg Bid)
    $139 Avg Bid
    17 bids

    i have parts like ultrasonic sensor and servo and inductive sensor i want to work together in different ways if inductive detect something give value 1 if not 0 if 1 rotate servo right 90 degrees reset pos. if 0 check ultrasonic for value that is 1 or 0 if 1 rotate left 90. and reset [login to view URL] 0 in ultrasonic sensor do nothing i want code to do this

    $17 (Avg Bid)
    $17 Avg Bid
    3 bids

    I need my ardunio to be able to detect the rpm of a bicycle wheel accurately using an IR sensor. Using an ultrasonic sensor to detect obstacles infront of the bicycle

    $104 (Avg Bid)
    $104 Avg Bid
    33 bids

    ...of administration of each icon.. for example. we will have user permissions. this means that we will add permissions to sensors so that we can configure the limits of the sensor, same for the other stuff [login to view URL] [login to view URL] [login to view URL] it will not

    $1249 (Avg Bid)
    $1249 Avg Bid
    31 bids

    ...looking for a data scientist who can help us with a project with analysis of temperature, energy and sensor data to look for optimisation opportunities and classification of data to generate messages to help optimise building performance. Knowledge and prior experience in building automation, HVAC and sensor data modelling is a plus. Work can be done in any

    $1260 (Avg Bid)
    $1260 Avg Bid
    23 bids

    ...customize an IPad scanner app (SDK) from Occipial - [login to view URL] with own logo and possibility to save the scan. All scanner functionality is in place and we use the app today, but we want some minor changes. Development language is XCode. This project requires expertise on Xcode, Swift, App registration ++. In the absence of this

    $4733 (Avg Bid)
    $4733 Avg Bid
    49 bids

    At the end of the project, a fully developed system compromising of the following components 1) Raspberry Pi 3 Model V 1.2 2) inAIR9B Antenna 3) Adafruit AMG8833 Breakout Thermal Imaging Camera Interconnected together, should be produced. The objective of the project is to be able to use the Thermal Imaging Cameras to detect and count the number

    $614 (Avg Bid)
    $614 Avg Bid
    7 bids

    Hi! I need a small and lightwave software to record and capture data from a Motion Capture suit. This are the necesities of the software! - Windows Based - Basic sensor management - Sensor calibration ✔ - Basic system calibration ✔ - Magnetic interference immunity* ✔ - Body dimension customization ✔ - Multi-viewing window ✔ - Motion data recording/replay

    $566 (Avg Bid)
    $566 Avg Bid
    11 bids

    Hello, I'm looking for individuals who can help me with WSN, IoT simulations. Simulation should be in Contiki/Cooja, NS2, NS3, Matlab or Ombet++ Hands on experience with LTE, IOT, Wireless Networks, Python, C, C++ needed. If interested please reach out.

    $176 (Avg Bid)
    $176 Avg Bid
    10 bids

    ...is source code to recreate this. The inertia matrix needs to be changed to a CubeSat. This paper contains the type of satellite I would like to be modelled and shows the sensor and actuator modeling. Refer to Table 1: Magnetorquer Parameters to determine the max control torque that can be generated by the magnetorquers.(https://www.researchgate.n

    $2344 (Avg Bid)
    $2344 Avg Bid
    17 bids

    1) On over speed vehicles passing by we would initiate a capture image event for IP Camera. This photograph would be saved in RPI USB Memory card. (Budget $1500AUD). 2) Editing photo (attaching Speed/Speed-Unit information) and saving to RPI. (Budget $700AUD). 3) Pushing captured photos to WebApp and associate every photograph to a Traffic Log Involves extensive changes in WebApp and Python. (Bu...

    $3092 (Avg Bid)
    $3092 Avg Bid
    47 bids

    Sketch 1 - DS18820 1 Wire temp. sensor to control two ssr relays on an Arduino Nano. Temp need to be displayed on an LED and relay on need to be indicated with led Sketch 2 - Optical water level to control 230 v ssr relay with Arduino nano. Software need to count the amount of water the pump connected to the relay will use and send warnings to thingspeak

    $158 (Avg Bid)
    $158 Avg Bid
    21 bids

    ...from a water sensor that outputs water level as a voltage. Full is 3V and empty is 0V. We would use a raspberry pi as the control system. At 2.4V the controller sends a signal to a solenoid valve that opens the valve. After a 10 second delay the controller sends a signal to turn a pump on. When the voltage on the water level sensor reads 3.0V

    $2263 (Avg Bid)
    $2263 Avg Bid
    9 bids

    NodeMCU interfaced with humidity sensor gets the analog input as moisture and post the moisture value to the cloud.

    $26 (Avg Bid)
    $26 Avg Bid
    10 bids

    ...source code program. Using Nuitrack SDK Computer vision programming, by [login to view URL] Want that you create a mouse functionality using virtual touch module of nuitrack. Hand movement will follow mouse pointer and grab will be click or hand goes z axis will replicate touch. Programmer can choose which camera sensor to using in the program. 1

    $50 (Avg Bid)
    $50 Avg Bid
    1 bids

    ...rounded corners or sensor housing should only be used for the 6.5-inch or 5.8-inch display. Resources For resources on creating great screenshots for the App Store, you may want to review the App Store Product Page information available on the Apple developer portal. Please ensure you have made any screenshot modifications using Media Manager. You

    $56 (Avg Bid)
    $56 Avg Bid
    21 bids

    ...a camera module that has the relevant spec and program the drivers to get it working with the Jetson Let me know if interested [login to view URL] [login to view URL] https://developer

    $654 (Avg Bid)
    $654 Avg Bid
    5 bids

    Looking for a recommendation on a PLC as well as programming for a very simple automation project. I have 1 pneumatic cylinder and I pneumatic turntable that I need to be able to control. process: Turn System on (illuminate GREEN LIGHT) Detect signal from a pressure sensor (Illuminate RED Light and turn of Green Light) control cylinder 1 to oscillate x times

    $17 / hr (Avg Bid)
    $17 / hr Avg Bid
    26 bids

    ...features implemented is the electronic compass. The code for the animation graphics (a rotating arrow that should indicate North) has been completed. Now I want the code for the sensor data to be written very accurately, by a pro in this field. The magnetic north must be detected and shown on the screen very accurately; therefore I need the code to be the

    $100 - $200
    Sealed
    $100 - $200
    15 bids

    i want to buy a large touch screen from alibaba. i need the system to display bottom of scree, all ac controls and to send ...controls and to send commands to a relay board left of the screen to cover 2/3rds of the screen the main system right of the screen has 3 displays, 1. 360 camera system, 2. tyre sensor monitor, 3 switching control eg. lighting.

    $786 (Avg Bid)
    $786 Avg Bid
    36 bids

    Indoor path tracking using accelerometer, gyroscope and magnetometer MPU 9050: 9DOF sensor MCU: Raspberry Pi B+

    $246 (Avg Bid)
    $246 Avg Bid
    5 bids

    Please contact me via chat if you are interested. The job needs to be done TODAY with about 400 products today and the rest after tomorrow evening. P...done TODAY with about 400 products today and the rest after tomorrow evening. Price to be negotiated. Please do write something about yourself so I know you have read the project through to the end.

    $33 (Avg Bid)
    $33 Avg Bid
    49 bids

    Hello, I am looking for an Arduino programmer to write a code for my project. The code should do the following: When receiving a specific SMS (eg: 'RelayON') -- but only if the measured voltage < 13.5 V -- the module should give 5V on a pin (eg. Digital pin 7) from Arduino board for a specific amount of time (eg: 5 seconds) - this will close a relay

    $146 (Avg Bid)
    $146 Avg Bid
    42 bids

    i have application that developed on IONIC framework. works with IPhone and android. i need someone to fix bug on the gps sensor

    $20 (Avg Bid)
    $20 Avg Bid
    4 bids

    This was project report writing about motor working on ultrasonic sensor using arduino UNO.

    $99 (Avg Bid)
    $99 Avg Bid
    9 bids