Will it 3d print jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    1,308 will it 3d print jobs found, pricing in USD

    ...for a specific camera and your designs i will take to a 3d printer to make it out to test it, then we will refined it, then 3d print it again test it and make final corrections and i will then get it made into aluminum for my needs. The camera is called a Zcam E2 the parts are an aluminum cage. I will...

    $173 (Avg Bid)
    $173 Avg Bid
    64 bids

    ...been drawn in 3DSmax but I want them drawn in Inventor. I need the 3D drawings and also the .dwg files so I can have the steel cut and rolled. I also want the 3D print files. I also want you to record your screen so I can try to draw it at home. I will be your student. This will be an ongoing job for the right person. To prove you have read my

    $100 (Avg Bid)
    $100 Avg Bid
    33 bids

    ...Design of a plastic case max. 10cm x 8cm x 1.5cm 1st Step for 3D print prototype 2nd step for plastic injection tool It is a small laser pointer case with 2 buttons, 2 laser diodes, LiIon battery, Microcontroller, USB connector. In the below picture: The upper picture shows how to hold it in your hand and click with to fingers. Yellow: USB connector

    $419 (Avg Bid)
    $419 Avg Bid
    54 bids

    We need to create an Android APK capable of sensing a printer connected via LAN, USB or wifi to a 3d party APK . No time wasters, please. We need someone really capable and willing to go the extra mile with us. Someone honest and with modest expectations. If your skills are good, you are fast and don't ask for a lot of money, then you are our friend

    $790 (Avg Bid)
    $790 Avg Bid
    19 bids

    ...designer to create a single page website for my ebook with online checkout system on it, to sell it online with PayPal / Credit Card. Site will be capable of having additional pages for future books in the same series. (1)Create eBook cover for book Draft will be provided from abandoned work by previous Freelancer with my comments for amendments

    $47 (Avg Bid)
    $47 Avg Bid
    4 bids

    ...like to 3D print but do not have the time to properly design myself. Its a NEMA 17 stepper motor bracket that clamps onto a structure and will be used to rotate a part. I have drawings and an accurate 3D model of the part it is supposed to clamp onto. I have made a draft mockup of the part I want, but I don't have time to do it myself. I expect ...

    $33 (Avg Bid)
    $33 Avg Bid
    1 bids

    ...about already but we just need a design for the enclosure the PCB is designed and if we had to its easy enough to make adjustments to it as a new prototype wouldn't break the bank. I think you already have a file for it, however I think the joystick and buttons may not have come out with that file. I can send you the drawings for those components so you

    $10 (Avg Bid)
    $10 Avg Bid
    1 bids

    ...the movie poster used in the movie 'Life Of Brian'. It has 3 levels with 1 word on each level. My poster requires 2 words on the top level and 1 word underneath. I know exactly what I want. I believe the movie poster was drawn or painted or illustrated not using a computer font rendered in 3D. I have attached an image of the 'Life Of Brian' title

    $103 (Avg Bid)
    $103 Avg Bid
    20 bids

    ...private buildings, and we are in the need of a 3d model design mockup to give us some inspiration to design the product and 3d print it. Its format is based on raspberry pi 3 model a+ with the Zerocam Fisheye lens camera as attached. The camera will be used for private buildings for personal security. Will be watchable by mobile. Needs to be compact

    $171 (Avg Bid)
    Featured Guaranteed
    $171
    50 entries

    Hi Inderjit we worked together on a previous project - a 3D print file of Peter Pan. I'd like to talk to you about your availability to produce some new files for me. Again it will be a character from Peter Pan this time these files will be of the character Tinkerbell 3 separate files, 3 different poses. Look forward to hearing from you. All my best

    $461 (Avg Bid)
    NDA
    $461 Avg Bid
    1 bids

    Hello i need a 3D model / custom Funko Pop Figure of those 2 characters (attached photos). For the female i only need the figure not the obelisk. figurres not need to be rendered in colours only details and it needs to be 3d printable [login to view URL] (figures will be handpainted after print). Here is a link to a premodel of the Pop Figure u could use to custo...

    $35 (Avg Bid)
    Guaranteed
    $35
    3 entries

    This drawing is for a tool used to undo a lid, i will have a separate tee piece with a diagonal end that sets into a diagonal shape in the center of the disks. ( to 4 different disks). The tee piece is inserted into either key 1, 2 or 3 and 4 and it is used to undo or tighten the lid. -PLEASE READ THIS DESCRIPTION CAREFULLY- I have already had a friend

    $35 (Avg Bid)
    $35 Avg Bid
    13 bids

    ...animator who understands 3D printing and who can: 1. Use the provided 3D rigged Blender model of a man and animate him running. Make a 32 frame loop of man running(See GIF) 2-Add hair to the model and create two outfits for the man. Clark kent and Superman. Keep in mind that Supermans cape must have a thickness to it so it will 3D print. Superma...

    $147 (Avg Bid)
    $147 Avg Bid
    6 bids

    Hi, I have a client that would like me to 3D Print and cast one of the two small characters in the image attached. I need someone fast and competent since the lead time is very short. Once my client gives me the green light, it will need to be completed within 48hours max. If this works out, I will have more casual jobs like this for the right person

    $23 / hr (Avg Bid)
    $23 / hr Avg Bid
    48 bids

    ...designs by cutting and grinding. Now we 3D print the designs and then cast it to bronze or silver. Would like to hire somebody to do the 3D models after provided pictures in .stl format. In the attachments there is photo of the desired design. Rough estimate for the diameter is around 35-40mm. This is a pendant that will be casted in bronze and silver. After

    $41 (Avg Bid)
    $41 Avg Bid
    15 bids

    We are lo...with their service. Preferably looking for manufacturers who can print 3d models, cast and finish the product either with setting gems or leaving it blank for stones to be set. Looking for manufacturers in india,china,hongkong or the likes where costs can be reduced. Products will be shipped to U.K. so that would need to be considered.

    $26 (Avg Bid)
    $26 Avg Bid
    3 bids

    3D model of cross to be 3D printed. 9"H x 5"W x 2.5"D. This is for printing several of these to place on a Credenza unit. They need to be very ornate, with deep curved grooves and an overall depth/thickness of 2.5". They will be placed directly onto a wooden door/panel on the credenza. I am looking for expertise to create the right type of model/file

    $88 (Avg Bid)
    $88 Avg Bid
    80 bids

    I am looking for an experienced modeler who will easily prepare a 3D model of the frame for the painting image, the file must be: - visually compliant with the photography given earlier - it must have exact dimensions - the final file must be delivered in STL format - the file must pass tests of 3D printing software Please check the attached The project

    $32 (Avg Bid)
    $32 Avg Bid
    16 bids

    I need a 3D rendering of a cutaway home that looks like the attached photo. It does not need to be exactly the same but the elements in this image is exactly what I am looking for. A cut away of a 2 story home showing the attic, a room, a bathroom, kitchen, garage, patio, trees, shrubs, grass and a fence line. NO BASEMENT. I will need a high res image

    $246 (Avg Bid)
    $246 Avg Bid
    36 bids

    I am looking for an experienced modeler who will easily prepare a 3D model of the frame for the painting image, the file must be: - visually compliant with the photography given earlier - it must have exact dimensions - the final file must be delivered in STL format - the file must pass tests of 3D printing software Please check the attached The project

    $57 (Avg Bid)
    $57 Avg Bid
    13 bids

    I am looking for an experienced modeler who will easily prepare a 3D model of the frame for the painting image, the file must be: - visually compliant with the photography given earlier - it must have exact dimensions - the final file must be delivered in STL format - the file must pass tests of 3D printing software Please check the attached The project

    $87 (Avg Bid)
    $87 Avg Bid
    13 bids
    Trophy icon Create STL Ended

    I need someone to take the attached images and create an still file so that I can 3D print the object. It will be use to direct air flow. Item A: Please make 3" Item B: Relocate holes to the top of curve Item C: Disregard Item D: Move to 0.875" Item E: Disregard Item F: More Curve- Less Squared Item G: Outside Dimensions are 11.8125"

    $50 (Avg Bid)
    $50
    22 entries

    ...need help getting this idea designed and in a 3D print ready format. I will need both the STL file and rendering preview of it. I need it 100mm in height (4 inch) I have attached reference images of the person I want done. Since she is leaning against the wall (and I only want the girl), her position will need some slight adjusting. I think her lef...

    $69 (Avg Bid)
    $69 Avg Bid
    8 bids

    ...changeable and print, stamp, and hopefully stitch friendly. We would need to use it on papers, cards, leather, watches and the website, so it really needs to be flexible. Example used is the Ralph Lauren brand logo (the Polo player). So for the original logo, don't be afraid to use more than one color, but try to limit it to 3 or 4 colors so it won't...

    $50 (Avg Bid)
    $50
    44 entries

    ...[login to view URL]) and Google Home Hub. It will be used by university owners in our platform ([login to view URL]). Our goal is to have all the files required to print this device on a 3D printer. This device will be built with Raspberry Pi 3 ([login to view URL]) and a touch

    $300 (Avg Bid)
    Urgent Guaranteed
    $300
    36 entries

    I need a logo redesigned for a nonprofit client. I want the logo to look like it does in the attached files, but it needs to be more refined and polished WITHOUT 3D effect. We need a two-dimensional flat logo design that has more gradient color scheme. Basically, the logo needs to look less "flat." The logo needs more light and shadows to increase

    $50 (Avg Bid)
    Guaranteed
    $50
    62 entries

    I am building a toy and to have a character for it, Requirement: Flexibly body joints, elbow,knee and hip-Leg joints in way easy to assemble after 3D print of each body parts. Hand stretched above head to toe length about .75" for both boy and girl. I will like to have my kids photo copy for facial appearance instead of just some random

    $562 (Avg Bid)
    Local
    $562 Avg Bid
    44 bids

    I would like to create a 3D file to which I am able to upload to a place that will print it using aluminum material. I essentially want to make an aluminum book cover, front and back, for a weekly planner I am making. I need the cover to be bindable, meaning that I need holes drilled along the edge to be able to use a metal spiral to bind the 2,

    $18 / hr (Avg Bid)
    $18 / hr Avg Bid
    5 bids

    ...are a french web agency and our client needs a website to show a 3D modeling of his work to his clients. His job is to print the lead/plastic cylinder around the bottlenecks of wine bottles. So we need a 3d artist to modelize a texturized bottleneck and export it for three.js. We will provide the website with a simple image upload so he can change

    $454 (Avg Bid)
    $454 Avg Bid
    28 bids

    Hello, I am after someone that can design and provide 3d drawings and files for housing of a mini pc that we have similar to a raspberry pi. I would like to 3d print the case as we are testing the device and need to protect it while testing. Very simple rectangle case that covers everything and only exposes the ports on two sides. I have cad drawings

    $96 (Avg Bid)
    $96 Avg Bid
    13 bids

    See the attached logo. It is a sphere with ribbons around it. I want to made into a 3D model I can print. So the ribbons need to be self supporting. I've attached a mono .ai and a colour which helps visualise it. model will be single colour.

    $35 (Avg Bid)
    $35 Avg Bid
    12 bids

    Need to design a plastic box, that i need to fit a machine inside, the machine is ready, so when we cover it, it will look like little cute robot. the robot will be 3D printed, that will fit in a box of 25x25x45cm 45cm is the height. attached sketch of what i imagine the robot to look like. there is a hole in the side to get out the robot special and

    $151 (Avg Bid)
    $151 Avg Bid
    54 bids

    ...need a 3D model of our glass bottle idea to be able to 3D print it. The sketches only represent the idea - exact modelling has to be done by the freelancer. As you see the bottle is quite unique, with many irregular shapes and edges, representing the raw style of a diamond. The bottle will be completely out of clear glass with nothing on it besides

    $132 (Avg Bid)
    $132 Avg Bid
    34 bids

    I have a tablet design that I had a frien...and don't want to ask him to make too many changes for free. I need a few things revised for a 3d print. Since I am painting the device, I'd like to separate out pieces that will be different colors. The original prototype is 3 pieces, and I'd like to make it 5 or 7 pieces that I can glue together instead.

    $146 (Avg Bid)
    $146 Avg Bid
    14 bids

    ...and it has to look exactly like the word image of a famous movie poster, except the 3 words I use are different to that original movie poster. I know exactly what I want. The title is from the movie 'Life Of Brian' by the Monty Python crew. I believe the movie poster was drawn or painted or illustrated not using a computer font rendered in 3D. I

    $78 (Avg Bid)
    $78 Avg Bid
    67 bids

    ...the Best Design. 2. Winner will deliver the File in Print-ready .ai and .png (300 DPI) along with a 3D mockup and 3. Original Source File of the Design with Fonts and Icons used for the Design. Please don't use Train/Railway in your design. It is transportation focusing business, not only Railway/Train. Winner will get the chance for later project...

    $33 (Avg Bid)
    Guaranteed
    $33
    67 entries

    Hi, We need an STL file that we can use to 3D print a case. The case will need to hold all 3 of the following devices, with the plugs facing externally: [login to view URL] [login to view URL] [login to view URL]

    $25 (Avg Bid)
    $25 Avg Bid
    25 bids

    ...FutureBook is a 100% family owned Canadian company, we choose to print in China. The highest quality printing in the world comes from China and our books are dramatically higher in quality and dramatically lower price. We also offer exclusive state of the art options such as lenticular 3D covers, video screens in covers, laser die-cuts, and on and on

    $13 / hr (Avg Bid)
    $13 / hr Avg Bid
    11 bids

    ...FutureBook is a 100% family owned Canadian company, we choose to print in China. The highest quality printing in the world comes from China and our books are dramatically higher in quality and dramatically lower price. We also offer exclusive state of the art options such as lenticular 3D covers, video screens in covers, laser die-cuts, and on and on

    $25 / hr (Avg Bid)
    $25 / hr Avg Bid
    28 bids

    ...playground and I need branding of it! I need a professional designer that has experience with restaurant branding identity. This would include the designing of the basic branding requirement such as logo, typography, colors, elements etc. and should provide me with a branding guideline plus mockups for the final phase. I will also need templates for presentation

    $100 (Avg Bid)
    Guaranteed Top Contest
    $100
    172 entries

    ...the logo without "". Code blue is an event where security people meet. #1 symbolizes our first event. It will be a sticker to put up on your computer/wall so the logo should be sticker friendly and ready for print. Flat design preferable, no 3D. File format for finished delivery .svg Our current company logo can be used as inspiration and has

    $60 (Avg Bid)
    Guaranteed
    $60
    41 entries

    3D builder is a software that allows you to create objects and print them seamlessly. I need the 3d printer too connect to a lcd screen which has a processor that can run the 3d builder software 3d builder has a print option and when it is clicked i wish the 3d printer to automatically print the object, the user will create sea...

    $52 / hr (Avg Bid)
    $52 / hr Avg Bid
    6 bids

    Hi i'm looking for 3d generalist to render a realistic cash check out counter like the one in the supermarket. we will need the final render high polygon with high resolution 8k because it usage for print and digital.. i had attached an sample counter and the rough visual please have a look the talents we will add in our own. Any question please don't

    $151 (Avg Bid)
    $151 Avg Bid
    39 bids

    Looking to design a simple case to print on 3D Width 168mm, Depth 157mm, Height 33mm In the left front corner to have mounted Raspberry 3 ( can mimic existing cad file of a smaller box) In the right back corner to have mount another board (size and position link here) [login to view URL]

    $153 (Avg Bid)
    $153 Avg Bid
    16 bids

    ...Step" will be shown underneath or to the side of your Logo. The Concept is a Fresh Look and Modern Health and Fitness/Well-Being and yet physical strength appearance. Colors preferred are Blue and Green gem stone colors. The design should be fairly masculine and not too corporate. Primary service will be one on one coaching and will be a personal

    $60 (Avg Bid)
    Guaranteed
    $60
    253 entries

    Hi, Need help to design the enclosure for a circuit board developed. We will be 3D printing the device enclosure. It needs to be good enough to be used in the field. The device has a LED light, a USB port for charging, and a button. These three elements must be incorporated into the enclosure design and the button, LED light, and USB port must remain

    $209 (Avg Bid)
    $209 Avg Bid
    57 bids

    Bulid 3D files for 3D PRINT IT IS NEEDED SEVERAL DESIGNS . iAM LOOKING FOR A SPECIALIST ABLE TO BULDD UP 3D FILES. THE FIRST ITEM WILL BE FRUIT BOL , DOUBLE WALLED, ORGANOTEXTURES PATTERN, TO BE MADE BY 3d PRINTER [login to view URL] IDEA PHOTO ATTACHED. DIAMETER ABOUT 30 CM. THE PATTERN IDEAS WILL BE PROVIDED, AS WELL LIMITS .MORE PRECISE DR...

    $180 (Avg Bid)
    $180 Avg Bid
    10 bids

    ...should be created in php or some other easy to use platform which has a simple control panel where we can update it in house without the need for the designers future input except to carry out software updates. The website can have 2-3d now or in the future, so the website needs to be dynamic and able to upgrade easily. we do need registration of both

    $1078 (Avg Bid)
    $1078 Avg Bid
    16 bids

    ...small projects that I have built in Houdini to 3D print. However, I am having trouble completing the project due to Booleans failing (crossed boundaries / unshared edges) Do you have some experience in Houdini? I will need these issues resolved ready for printing. I will also have more projects coming up so it would be good to find someone to work with

    $39 / hr (Avg Bid)
    $39 / hr Avg Bid
    8 bids