Filter

My recent searches
Filter by:
Budget
to
to
to
Skills
Languages
    Job State
    99 jobs found, pricing in USD

    Hi, I am looking for someone with a background in Quantity Surveying & Commercial Construction to provide a priced BOQ for a commercial development (approx. $1.5m to $2m) located in regional Victoria. The project is a Community Centre within an aged care village, and includes an indoor pool. The structural drawings are preliminary at this stage and do not provide member details (but happy to include this as a provisional sum based on your experience). Our Client has also requested the following changes (not shown on the drawings): 1. The bar facade is to be brickwork as per the outdoor fireplace not metal cladding. 2. The timber ceiling is to be deleted (assume it is to be plaster). 3. The mechanical system is to be rationalised to a more conventional (standard) operating system. 4. The bowling green is not part of our scope. We are also keen to offer as many alternative/ cost savings for consideration so we would also like a list of potential items and approx. values as part of the work.

    $378 (Avg Bid)
    $378 Avg Bid
    9 bids

    Screened pool enclosure needs repair. About 6-8 panels need to be rescreened.

    $250 - $750
    Local
    $250 - $750
    0 bids

    Reformar quase todos os cômodos e trocar janelas favor entrar em contato de imediato (Removed by Freelancer.com admin)

    $3712 (Avg Bid)
    Local
    $3712 Avg Bid
    2 bids

    Работы будут производиться в зонах Duty Free Шереметьево, Домодедово, Внуково.Ориентировочно оформляется 2-5 зон в месяц, как правило к 1-му числу каждого месяца. Требования:-Опыт работы в рекламно-производственной компании или рекламной агентстве -Опыт работ по монтажу и демонтажу рекламных конструкций, виниловой пленки, изображений на ткани и пр. -Знание материалов, применяемых в рекламе и технике работы с ними -Готовность выполнять срочные, не запланированные заранее работы -Аккуратность -Внимательность к деталям -Пунктуальность -Ответственность Обязанности: -Выезд на замеры -Оформление промо зон -Монтаж напольных стикеров -Монтаж световых коробов и замена изображений в световых коробах (в том числе с рекламными носителями на бэклите, ткани, баннере, бумаге) -Монтаж подвесных конструкций -Перемещение промо конструкций -Уборка оформленной зоны после монтажа Обязательно: -Разрешение на работу в РФ -Российская прописка (желательно Москва или МО) -Отсутствие судимости Условия: от 2 до 5 выездов в аэропорты в месяц. Оплата от 2000 руб. за выезд, в зависимости от видов работ. Работа по срочному договору.

    $30 - $250
    $30 - $250
    0 bids

    high rise buildings: are they structually efficient and sustainable 8,000 word project were you have to cover every aspect from foundations to structural aspect to everything

    $239 (Avg Bid)
    $239 Avg Bid
    30 bids

    Hello, I am looking for offshore staff for the following roles: - estimator / quantity surveyor - draftsman - contract administrator - design manager Please send me your experience, example of work and include your hourly rate Start your proposal with MATE

    $23 (Avg Bid)
    Local
    $23 Avg Bid
    7 bids

    We are renting an space and we need to work on the floor to make it acceptable for a gallery space. Kindly find attached plan area. We want to keep the concrete surface in Gallery 1 and downstairs area. We think that it just needs to be polished to look good.

    $544 (Avg Bid)
    Local
    $544 Avg Bid
    2 bids

    Hi Christian D., I noticed your profile and would like to offer you my project. We can discuss any details over chat.

    $33 / hr (Avg Bid)
    $33 / hr Avg Bid
    4 bids

    I need somebody to find me a supplier of prefab/modular/container type housing where I can buy 1 unit for under $250. I have looked on Alibaba but cannot find a supplier at that range

    $296 (Avg Bid)
    $296 Avg Bid
    7 bids

    Need a 3-D draft of wooden dragonfly art structure that will be built at Burning Man. The piece will be burnt at the end of the event, so it will need to incorporate the least amount of non-wood elements as possible (limited amount of steel/metal is allowed). Length 20', Base 11', wing 20' approx. Have sketches and pressboard models available. This project may require a couple of calls to finalize the requirements of the draft. Thanks

    $422 (Avg Bid)
    $422 Avg Bid
    19 bids

    Need to get few countertop displays made. For example, 24” H x 60” W x 24” D. 3-4 Shelves, Open from back. Need about 3 similar size display cases.

    $250 - $750
    Local
    $250 - $750
    0 bids

    Шукаю людину (або 2 людини) для встановлення паркану з сітки рабиця на дачній ділянці, за Львовом. Дорога оплачується. Бажано з досвідом роботи.

    $222 (Avg Bid)
    Local
    $222 Avg Bid
    1 bids

    Hello , We are looking for a long term partner who can promote and marketing our pool cover in America and Australia market. You need to get: 1. In swimming pool building field, get relative source 2. Know how to promote an item in local market 3. Get building experience and can help to guide the installation Pls get a rough understanding of products from the attached pics .

    $1591 (Avg Bid)
    $1591 Avg Bid
    3 bids

    Bonjour, Je recherche un/plusieurs rédacteurs Web, pour développer du contenu éditorial dans le domaine des travaux (il n'y a pas de connaissances requises dans le BTP). Le profil : - Bonne capacité littéraire / de rédaction, en Français - Bonne capacité d'analyse - Idéalement, intérêt pour les thématique "bricolage/construction" mais ce n'est pas un prérequis. - Freelancer ou agence qui gère des rédacteurs

    $6 / hr (Avg Bid)
    $6 / hr Avg Bid
    32 bids

    NLU425 is a natural language understanding research company. The company owns web properties to help develop and improve the natural language algorithms. This project involves the evaluation of a driving experience at the Yas Marina Circuit in Abu Dhabi. We are seeking a freelancer local to Abu Dhabi that can assess the driving experience by participating and taking great photos and videos of the event. No editing is expected.

    $163 (Avg Bid)
    $163 Avg Bid
    2 bids

    Buscamos un arquitecto para finalizar estudio de costes para vivienda unifamiliar. Es necesario disponer del programa Cype para poder realizar el trabajo. Actualmente el estudio de costes con construcción tradicional (gero) se encuentra realizado al 90%. Requerimos un arquitecto para realizar los siguientes estudios: > Finalización de estudio de costes con construcción tradicional (Gero) *Completado el estudio a un 90% únicamente es requerido finalizarlo. > Estudio de costes con material Ytong + Placas alveolares *Completado el estudio a un 90% únicamente es requerido finalizarlo. > Estudio de costes con steel framing/ paneles sándwich / osb Presupuesto para la realización del trabajo: 200€

    $129 (Avg Bid)
    $129 Avg Bid
    5 bids

    need a fence installed. My property is on a hill and my yard is large.

    $38888 (Avg Bid)
    Local
    $38888 Avg Bid
    1 bids

    We have these Access Points and the cabling is complete but we need somebody to mount the Access Points on the ceiling and connect them to the network. Some of the ceilings are plasterboard and some are concrete.

    $424 (Avg Bid)
    Local
    $424 Avg Bid
    1 bids

    Compile a structural engineering report on a partywall. It will need to be done by a UK qualified structural engineer.

    $277 (Avg Bid)
    Local
    $277 Avg Bid
    1 bids

    I have a list of aprox. 3500 Bacnet points for a 10 floors building. Also the floorplans of the building. I need to make sense of the data. Recognize the room which a temperature datapoint belongs to. The same for energy meters. The information is in French.

    $622 (Avg Bid)
    $622 Avg Bid
    7 bids

    Hi Christian D., I noticed your profile and would like to offer you my project. We can discuss any details over chat.

    $15 (Avg Bid)
    $15 Avg Bid
    5 bids
    Build me a house Ended
    VERIFIED

    I have a land registred in my name and need a contractor to build a house in it. We’ll discuss further with face to face meet.

    $42913 (Avg Bid)
    $42913 Avg Bid
    10 bids

    We are after a bill of quantities for a commercial construction tender (in excel). The project involves the refurbishment of part of a regional hospital, specifically an emergency department. The works include associated services upgrades, and a new ambulance entry.

    $364 (Avg Bid)
    $364 Avg Bid
    35 bids

    A building condition survey If your IBSP topic related to MBIS or condition survey, please note the following points: MBIS topic: 1. You should follow the CoP for MBIS and Practice Notes for RI to prepare your report 2. Some MBIS report not cover all the 5 major inspection elements 3. Not give the MBIS inspection tables only, you are required to explain your finding and diagnosis of the possible causes as well as your suggested repair method. Mark-up plan should be provided to show the defect location 4. Building condition survey report must cover all the building components (not only MBIS 5 elements) including exterior, internal common area as well as all the building services items i.e. water supply system, drainage, Fire Services Installations, E&M and gas installation, security system etc. 5. Diagnosis is the major component in an inspection report / condition survey report. You can refer to the building maintenance or building defects reference books for the diagnosis. 6. All the photos should be annotated with the location, purpose and nature etc. 7. Not just copy the report from the IA workplace without your own work.

    $20 / hr (Avg Bid)
    $20 / hr Avg Bid
    2 bids

    Simulation using Simul8 2016Software, will discuss on chat.

    $30 (Avg Bid)
    $30 Avg Bid
    1 bids

    Require someone to complete a few exercises based on an A3 floor plan. These are to be very simple. Nothing technical/too detailed. But you do need to comply with all the necessary criteria. Should be drawn on 5mm paper. I need the first two exercises by the 15th of March, and you can complete the rest during whenever (preferably within a week or two). I can provide you with more details. Please look at the attachments before you bid. Needs to be completed to Australian standards/methods.

    $115 (Avg Bid)
    $115 Avg Bid
    12 bids

    Civil enggineer in resdential project

    $47 (Avg Bid)
    $47 Avg Bid
    5 bids

    Hi Mario912, I noticed your profile and would like to offer you my project. We can discuss any details over chat.

    $15 (Avg Bid)
    $15 Avg Bid
    1 bids

    Wir suchen jemanden, der mit uns von ersten Skizzen bezüglich der Raumaufteilung bis hin zu ersten Bauvoranfragen / dem Finalen Bauantrag gehen kann.

    $37 - $308
    Local
    $37 - $308
    0 bids

    I require house working plans to be prepared baded on a current concept Progress the concept into 3d working perspecitve concepts and detailed 2d working with enough detail for council approval and construction. All plans are to comply aith AUS standards and building code

    $24 - $196
    Local
    $24 - $196
    0 bids

    Hi, I am looking to have our Master Bath Redesigned. I am also looking for a 3D Virtual Designer, come to our home. Once my Wife and I can see what the New Design would look like including Project Cost, we then can move forward with the hole project. P.S. I need someone that is licensed and extremely reputable. I also would prefer to have someone near our zip code 08831.

    $3000 (Avg Bid)
    Local
    $3000 Avg Bid
    1 bids

    Seal my window from the outside and redecorate two rooms affected by dump.

    $3322 (Avg Bid)
    Local
    $3322 Avg Bid
    3 bids

    I need an expert in Design Builder and EnergyPlus (Preferably an Industrial Engineer or an architect) for simulations and different energy and buildings modelings. Message me for details,

    $169 (Avg Bid)
    $169 Avg Bid
    18 bids

    I need a builder to build the school and add very detailed stuff.

    $10 - $40
    Local
    $10 - $40
    0 bids

    Building a Roblox game so I can enjoy it and make people enjoy the game.

    $10 - $50
    $10 - $50
    0 bids

    Hi, I am looking to have our Master Bath Redesigned. I am also looking for a 3D Virtual Designer, come to our home. Once my Wife and I can see what the New Design would look like including Project Cost, we then can move forward with the hole project. P.S. I need someone that is licensed and extremely reputable. I also would prefer to have someone near our zip code 08831.

    $3055 (Avg Bid)
    Local
    $3055 Avg Bid
    1 bids

    Need a tree house in my back yard for my sons and theres a big oak tree perfect for a tree house

    $21 / hr (Avg Bid)
    Local
    $21 / hr Avg Bid
    1 bids

    Instal 3 sets of Rubbair - Poly-Kor, Vcam Insulated ABS Impact Door. Picture attached of approximately what they look like.

    $833 (Avg Bid)
    Local
    $833 Avg Bid
    1 bids

    Realizuje szkolenia dofinansowane z funduszy EFS, poszukuję szkoleniowców, branżystów w każdej dziedzinie. Osoby chętne do współpracy, z dyspozycyjnymi terminami. Nie potrzebne wykształcenie pedagogiczne lecz chęć do nauczania młodzieży w wieku licealnym. Planuje stworzyć sieć osób szkolących, które do roku 2022 będziemy wspólnie realizować.

    $2819 (Avg Bid)
    $2819 Avg Bid
    2 bids

    Hi Md Mithu R., I noticed your profile and would like to offer you my project. We can discuss any details over chat.

    $982 (Avg Bid)
    $982 Avg Bid
    10 bids

    Looking for design ideas etc. I currently have a home that was built in the 1970, in need of a curb appeal update, also the home currently has a two car garage under the home (on the left side of the house) that is noisy when the garage door is opened and the bedrooms are above. Additionally, I have a second driveway on the right side of the house that is more practical to enter the house especially with groceries. I am looking at options but what I am considering is relocating the 2 car garage (may need to be a bit bigger for storage etc) to the right side of the house and build a connector from the existing side door to the garage so that we can go from the cars directly to the house. Bushes & driveway on right side of the house would have to be rebuilt to accommodate the new 2 garage; the driveway would be wide at the garage and narrow to get to the street. I would also like to change the curb appeal by possible adding doghouses to break up the roof line and change the entrance way. I want to change the siding of the house, as of now we have 11-12" old redwood siding that is painted and box out windows with trim. etc. very open to new ideas to change the look of the front of the house. Where the existing two car garage is I would like to close the wall and add a door (or French doors or other) to allow access to the basement from that side, door would need to favor the left side of existing opening so I can use the remaining space for storage.

    $175 (Avg Bid)
    $175 Avg Bid
    17 bids
    Office build out Ended
    VERIFIED

    Looking for a general contractor with experience in commercial office build out. Looking for local contractor to meet with in Livonia area. Open space, looking to build 6-8 offices with 2 conference rooms. plumbing and electrical already in place.

    $13333 (Avg Bid)
    Local
    $13333 Avg Bid
    1 bids
    Dig 4x Postholes Ended
    VERIFIED

    Dig 4 Postholes (for fence) 250x250mm wide 600mm deep

    $22 - $184
    Local
    $22 - $184
    0 bids

    I'm planning to use Opencv(3.4) in C++ (Qt creator) in Raspberry pi 3. i have tried building using Cmake GUI. unfortunately ffmpeg do not build with opencv. Note: i don't want just Opencv to be built, i have done that already. it works fine. i am looking for someone who can build Opencv WITH ffmpeg for C++ (NOT PYTHON) if you want i'll give access to my device (rpi 3)

    $175 (Avg Bid)
    $175 Avg Bid
    6 bids

    - Imbiancatura appartamento su due livelli di 55mq (vernice acquistata) - Tagliare in altezza due armadi impiallacciati. - Creare armadiatura sottoscala (legni acquistati) - Sistemazione generale giardinetto 20mq - Piastrellare bagno di 6mq (piastrelle acquistate) Le figure possono essere differenti: devo rientrare al budget max con tutti i lavori, da effettuarsi entro fine febbraio. Attrezzatura in Vs possesso. No improvvisati/inesperti. Grazie

    $305 - $916
    Local
    $305 - $916
    0 bids

    Hi, I am looking for a good builder who can help construct a 4Level house in Bangalore, India.

    $2155 (Avg Bid)
    Local
    $2155 Avg Bid
    9 bids

    make good and rebuild a section of wall approx 5 metres long by 1 metres high in double skin brick to match existing assess damage to adjacent impacted wall sections and where required demolish and rebuild in double skin brick to match existing dispose of all bricks and building materials to an appropriately licensed waste site dispose of all car parts to an appropriately licensed waste site

    $6916 (Avg Bid)
    Local
    $6916 Avg Bid
    1 bids

    Room 1: 3.5 x 2.6 height 2 m Room 2: 2 x 2 hight 2 m All together need to build 5 walls with light timber frame and plasterboard. It very easy job I don't have the time otherwise I would've done it myself. Materials will be supplied but you have to have your own tools.

    $1322 (Avg Bid)
    Local
    $1322 Avg Bid
    1 bids

    We need a consultant to do a quantities takeoff in planswift

    $24 - $201
    Local
    $24 - $201
    0 bids

    I need somebody to visit a vacant land block and give me a rough guess (based on metres and size) on how big of a property and what style I could build. Must be acceptable with local codes.

    $8 - $23
    Local
    $8 - $23
    0 bids

    Top Building Community Articles