We need a electronic board and software for Arduino, to get in touch Coin and bill acceptor , thought serial protocol to know which bill or coin is getting into the machine. We need to hear the coin and bill validator using RS232 virtual port to put in the screen the value. Actually we are using MDB4.2
I have a LabView code to control an instrument" Keithley 6487 picommeter and voltage source". The code is basicly for an older version of the instrument and I made some changed to have it working on this version. I used to be working some time but I want start showing some problems later on. I want to have it fixed and make a stand alone version from it.
Monitoring the running parameters and provide control functions to efficiently mange a visual inspection system in serial production Record running real time data to an external file for subsequent analysis Allow for remote monitoring and control by sharing real time data over the network Simulate a camera inspection system for manufactured parts
We want to create a Labview program to control a Zaber X-Z stage([url removed, login to view]) to move a probe across(in 10 micron steps) the sample and make AC(1000hz) measurements sourcing from Keithley 6221(about 10mA) and measuring on 2182. Datalogging required.
1. Model verification/identification of an electromechanical plant, Voice Coil-Driven Flexible Positioner Simulator (VCFP). Simulation using Matlab/Simulink. 2. Design digital PID controller for a position and velocity signal inputs. 3. use industry standard real-time dSPACE software/hardware 4. use dSPACE for hardware in the loop to implement the designed digital controller and assess its performance. you are required to produce a written document solving the Problems set out in Part A below. Include in your report your design methodology, all Matlab codes and graphical output, and dSPACE implementation applied.
I need you to develop a LabVIEW Library for me which is communicate with the PLC, also do some programming with TIA Portal for Siemens S7-1200 PLC. I would like this software to be developed for Windows.
I would like for someone who is proficient in MATLAB codings to help me modify my coding by introducing disturbance and a coding to compensate that disturbance in a damper system which replicates a steel rolling rig. Files will be given as reference.
I want to devolpe a 3d model of a system using matlab simscape and finding its transfer function a 3d model of the system is attachaed
I want Design Zeta converter in Proteus by using PID control in Arduino, I did the calculation for zeta converter ... I want zeta converter to take voltage from solar from 10V to 30V as I did the calculation in the "Word" and the output voltage 12V ...
Project : Enginesoft report generation EngineSoft is a labview based software for performance testing of I C Engines. It is developed by inhouse team @ 10 years back. It works with NI-USB6210 DAQ device. After data logging and calculations, reports are generated in MS office and Excel The software generates reports in Microsoft Office 2007. Requirement: It should generate reports with Microsoft Office2013 or higher versions.
Need a freelancer to port an old Altera(maybe even Xilinx ISE) project into Xilinx Vivado and provide the bitstream to run on a Digilint Zybo Zynq-7010. May be done very quickly since many files are already in a ISE project. Resources: [url removed, login to view] [url removed, login to view] [url removed, login to view] [url removed, login to view] [url removed, login to view] [url removed, login to view] [url removed, login to view] When complete the bitstream will be loaded on the Zybo, the Zybo will retrieve blockchain data, calculate sha-2 hash values, and provide hash prof-of-work to any pool(such as slushpool). Upon completion freelancer will provide bitstream, Vivado project and copy source code to relevant GitHub repository. No more than a few new lines of source code should need to be written. If code no longer functions because of out-of-date or no longer available dependencys, conditions of completion will be changed form "complete working system" to "other".
I need monitorize around 30 different equipments as ovens, autoclaves, freezers, etc which uses temperature sensors like termocouples and pt100. The purpouse is collect all sensor's signal and screen into a SCADA system.
This is a Desktop application, the purpose of which is to test a product. The product is a physical product, testing of which requires some test analyzers. These analyzers can communicate with application using USB/LAN. Someone who has experience in developing such applications will be an advantage. Developer should have experience in using State design pattern. Each state is associated with communication with analyzers, user input and Database. As the application needs to interact with physical devices, there could be any delay in receiving any data, it should not affect the responsivness of the UI. We are also looking for nice UI . We can provide some UI designs if there is any need. Application should look like professional application.
Hello, I have requirement to generate two pulses of Variable Widths and variable time gap using LABVIEW 2017 and myRIO 1900. For example: First Pulse Width of 25us ~> a delay of 5us ~> Second pulse width of 5us ~> (Repeat this sequence with a Frequency of 5Hz ) I have attached the expected waveform. I am new to LABview if someone can share VI file or concept to make it. Please let me know of any material that I must read to implement this.
Need person(s) with below skills in Chennai, India: 1. Understanding in Test systems to verify software at system level 2. Experience in understanding existing hardware schematics 3. Experience in debugging existing test harness 4. Experience in using Basic hardware like oscilloscope, multi meter, function gen and other related test input system 5. Experience in developing Scripts in any language 6. Experience in developing test setups 7. Experience in C or C++ mandatory. Experience in Matlab,Simulink or Labview preferred. 8. Experience in model based development preferred
Multisim software from National Instruments will be used to model the equivalent circuit above using the ordinary circuit components shown. LABVIEW development platform would then be used to display the IV and PV characteristics obtained from the Multisim software for the PV model operation under Standard Test Conditions (irradiance of 1000 W/m 2 and temperature of 25 0 C). The irradiance value will be multiplied by a reducing factor and another simulation run. This would represent uniform shading of the PV cells. LABVIEW will be used again to obtain the PV and IV characteristics of the PV model. The final step would involve connecting of a bypass diode to a specific number of cells in a series circuit. This is because shaded cells need to work with a reverse bias voltage in order to give the same current as the illuminated cells. However, excess reverse bias voltage could cause hotspots in the shaded cells that would result in an open circuit creation in the entire PV module thus the need for the bypass diode. The simulation will then be run with these new changes and the PV and IV as displayed on the LABVIEW Front panel will be recorded. Finally, analysis for all the three cases would be done to identify the changes in the power output of the PV from the PV plots so as to determine the effects of uniform and non-uniform shading on power output of a PV. Efficiency of the PV model for each case and fill factor for each case will be determined. The values of interest for each case can be obtained from the PV and IV curves. These include short circuit current (I sc ), open circuit voltage (V oc ) and maximum power (Pmax).
I am working in the area of machining of Titanium alloys, where i am recording the Material removal rate (MRR) and Surface roughness (SR) of the machined components. I saw your developed Multi-Objective Particle Swarm Optimization (MOPSO) code in MATLAB and i downloaded it form "[url removed, login to view]" I am trying to run this code by modifying the objective functions in MOP2(x) file., but the Pareto optimal front is obtained for the previous one function (as you have fixed). Please help me in modifying the functions and other parameters in the code. Please let me know where i have to make changes in the code. I have 4 variables and thier lower and upper bound are as follows: Lower bound = [0 5 50 8] Upper bound = [6 15 150 72] the objective functions are: z1 = 0.002+ 0.0185*A+ 0.0030*B+ 0.00175*C+ 0.00120*D - 0.00126*A.^2- 0.000024*B.^2-0.000007*C.^2+ 0.000002*D.^2+ 0.001111*A.*B+ 0.000008*A.*C- 0.000400*A.*D - 0.000006*B.*C - 0.000026*B.*D; z2=0.442 - 0.0188*A + 0.0126*B - 0.00007*C + 0.00151*D + 0.00428*A.^2 + 0.001541*B.^2+ 0.000002*C.^2- 0.000008*D.^2- 0.00481*A.*B - 0.000211*A.*C + 0.000048*A.*D + 0.000173*B.*C - 0.000065*B.*D; Thanking you in anticipation I am attaching the .m files. I am requesting you to please help me in this regard. I am just beginner in MATLAB. Kind Regards
WE NEED AN ARDUINO SOFTWARE WITH THE NEXT REQUIREMENTS: LABVIEW INTERFACE COMUNICATION WITH ESP-8266 MODULE TO CONTROL A 3,5v MOTOR
here i need a person who could enable me in grounding and applying forces on my pre existing CAD models. I have already generated the fully XML file from CAD software, i just need the person to ground the model on a plane.
Hello, I have this XY graph with some real data. The limits were established prior to the WHITE lines have been drawn on the graph. That is leaving me with all kinds of FAILURE because of the existing test. Sometimes the motor is running too slow, grabbing too few of a data. Sometimes its too fast grabbing too much of data. Can I set the limits somehow were its more dynamic? As in, when the end slope is starting to ZERO out when where THE LIMIT line ends? Can someone guide me in the right direction. I am using Labview 7.0 I can open with Labview 8.0
I have a bunch of data files that I would like to be analysed. I know exactly what analysis needs to take place and when, I just don't have enough Labview skills. The data is in a matlab file, contains signals at 1500Hz for approx 2-6 mins on ~100 channels. I either want an all-singing mega program, or two separate ones; one to cut down the data into chunks of data of interest (based on events or user-placed markers); and the second to perform the correct analysis on the correct channels of data. What makes this fun is that I have 20 participants and no two data files are in the exact same configuration.
we want to develop an indoor positioning system using dead reckoning method. we are using STM32F0 microcontroller. using only accelerometer and gyroscope. We want to use EKF or any other suitable method. We also prefer to show the position of the object directly for a short time and distance. so is it possible to employ these data in embedded platform (keil u-vission) to develop the system. other possibility is to save the data in SD card and use Matlab to process the data offline. THANKS IN ADVANCE
I need a certified Labview Developer (CLD) or Certified Labview Architect (CLA) for a Labview based project. Payment will be handsome and details will be shared only with the hired candidate. The candidate must be present in Pune, India or should be willing to travel as the deployment will require physical presence.
Need to generate some filters in labview and demonstrate the waveforms using matlab.
Robot picks up any object and keeps it from one place to another. Robot scans the object to be picked up which include image processing and keeps it from one place to another. The project must use Arduino UNO , MATLAB. This is a computer science project.