Building Architecture Jobs

I need a skilled decorator to transform my rented 2-bedroom flat with a traditional style. The focus areas are the living room and bedrooms, with an emphasis on high-quality lighting. Key Requirements: - Traditional style expertise - Experience with rented property decoration - Strong focus on lighting design and selection Ideal Skills and Experience: - Interior design certification - Portfolio showcasing traditional designs - Ability to source and install lighting fixtures Please share your portfolio and relevant experience.

I recently bought the lot next to my home and I want to use it for a simple “through and through” driveway. To get zoning approval I need a clean, professional drawing set that shows: • A scaled site plan with the full driveway layout and precise dimensions • Two clearly marked curb cuts—one on the front street and one on the rear street—drawn to the widths required by our ordinance • All notes or call-outs that reference the relevant sections of the local zoning code I can provide the requirements the city requests. There is no survey. I am not yet sure if the planning board will insist on landscape or drainage details, so I would value your advice on whether to add them before submission. Please deliver a PDF set ready for the permit desk alo...

I have a vacant block in Western Australia and need a clear, hand-offable 2D concept sketch for a three-storey family home. I have uploaded a sketch showing the level of detail I am after and a list of the rooms I want on each level. The block is a regular shaped corner site with a 17m frontage that has river views and a 40m frontage to the second street. I would like to stay within a building envelope of 14m x 32m. The block has an upward slope of about 3 metres sloping from the 17m frontage to the rear. I would like the four car garage at the end of the block furthest away from the view. Nothing too polished, PDF delivery is fine, although an AutoCAD file is a bonus if you work digitally. Please keep local Australian building practices in mind so the concept feels realistic to deve...

The architectural concept for a new 1,450 m² restaurant-plus-retail venue in Bali is locked in; now I’m concentrating on the structural side. The building spans a basement, ground floor, upper floor and a roof terrace and is roughly 75 % steel framing over an RC basement and foundations. Because we sit in a high-seismic zone, the frame, connections and foundations must be proven against ASCE 7 load combinations and seismic provisions, with concrete detailing to ACI 318 and steel design to AISC 360 (knowledge of Indonesian SNI is an advantage). I need someone who can: • Analyse the full gravity, wind and seismic load paths in ETABS or SAP2000, • Optimise the steel and RC members, then design the foundations, • Develop connection calculations and details, &b...

FREELANCE BRIEF Archistar Master Plan Options — 3D Modelling 16–28 Blueridge Drive, Dubbo NSW Prepared by Work Rest Play Here · 16 August 2026 Overview Work Rest Play Here holds a group of adjoining industrial lots along Blueridge Drive, Dubbo NSW, numbered 16 through 28. We need a freelancer to build this site in our Archistar account, place the existing constructed buildings and the already-approved future buildings on it, then produce options for extending the community title subdivision across the lots that are still undecided. This project is referred to internally as “Lease Friend Master Plan Options.” Scope of Work 1. Kickoff briefing (20 min, Teams/Zoom) — A short call at the start to walk through the plans, the site and the goals for the proj...

I’m renovating a residential house and need a qualified professional to design and document the structural support for a new staircase opening. There is no existing chimney to deal with, so the entire effort can concentrate on keeping the surrounding floor and load-bearing walls secure once the opening is cut. Here’s what I’m looking for: • Structural calculations that prove the modified floor will meet local code once the opening is in place. • A concise set of drawings showing beam, joist, and post sizes, connection details, and any required plates or brackets. PDF is fine for review; a DWG or similar editable file will be needed for the contractor. • A brief specification sheet listing material grades (steel or engineered timber), bolt sizes, and an...

I’m moving into the interior-finishing stage of a newly built residential townhouse and need a detail-oriented professional to see this last phase through to completion. Your job will be to translate my design concept into a fully specified finish package, source and schedule materials, and oversee on-site installation so every room is delivered move-in ready. Scope of work • Develop or refine finish schedules covering flooring, cabinetry, fixtures, hardware, paint colours and any bespoke millwork. • Confirm product availability, lead times and quantities with suppliers, then align deliveries with the build timeline. • Coordinate and brief trades—painters, tilers, carpenters, electricians, plumbers—so workmanship meets design intent and local code. &...

My concrete-clad commercial building needs to stand out after dark. The brief is clear: develop an exterior lighting concept that both attracts attention and highlights the structure’s strongest architectural features. Security illumination is a secondary concern; visual impact is the priority. I will provide elevations, CAD files, photographs, and a brand style guide at kickoff. Based on these resources, please deliver the following: • Concept mood boards illustrating colour temperature, beam angles, and fixture placement • A full lighting layout with fixture legend, circuiting, and control strategy (DMX or DALI—whichever best serves the concept) • Photometric calculations that demonstrate target lux levels and surface uniformity on concrete • High-...

I need a Georgia-licensed civil engineer to prepare a full, permit-ready drawing package for a small site that requires three components: • Storm-water management layout showing flow paths, structures, and any detention or treatment details. • Retaining-wall design sized for the on-site soils, complete with footing, reinforcement, drainage, and safety notes. • Updated contour and spot-elevation map that ties the new work back to existing topography for accurate grading. Please deliver PDF sheets suitable for county submittal plus the native CAD files. All sheets must carry your current Georgia PE stamp and signature. I will provide the survey, preliminary site concept, and any municipal checklists as soon as we start. If you have questions on local ordinances or need ...

I’m working on an architectural trellis that needs to clear-span 9000 mm in galvanized steel. The concept is locked in and I already hold a full set of detailed CAD drawings showing member sizes, connection ideas, plan, elevation and sections. What’s missing is the professional touch that turns those drawings into a build-ready package a fabricator can pick up without guesswork. Scope • Check the existing layout and confirm the span will perform as an architectural feature under dead load, wind and light maintenance loads. • Optimise or validate member sizing and connection details for cost-effective fabrication and hot-dip galvanizing. • Produce shop drawings (DWG + PDF) with plate, bolt and weld schedules, plus a concise bill of materials. • Sup...

I need a skilled contractor to design the exterior of a 40’x30’ equipment barn to look like a carriage house. Requirements: - Use metal panels for siding - Color: Burnished slate - Style: Carriage house look Ideal Skills and Experience: - Experience with barn and carriage house designs - Proficiency in working with metal panel materials - Strong understanding of color and design aesthetics

I need an experienced engineer/contractor to tell me if an interior wall is load bearing or not. The goal is to create an open floor plan. Requirements: - Assess if wall is load-bearing - Ensure structural integrity Ideal Skills & Experience: - Knowledge of load-bearing walls - Strong attention to safety and detail

I need detailed electrical, mechanical, and structural plans for a meat shop. This includes all necessary systems: HVAC, plumbing, and refrigeration. Ideal Skills and Experience: - Expertise in designing electrical systems for commercial buildings. - Proficiency in creating mechanical plans, particularly for HVAC, plumbing, and refrigeration. - Strong background in structural engineering. - Experience with food industry regulations and requirements. - Ability to provide a detailed project proposal, showcasing past work and relevant experience. Please include: - Past work - Experience - Detailed project proposals

Looking for an interior designer for our pharma factory spaces in Ahmedabad, Gujarat, India. The scope includes designing passages in production and laboratory areas, toilets, reception, a cabin, and other factory-related spaces. We prefer a modern or Western design style that aligns with the functional and compliance needs of a pharmaceutical environment. The project budget is around ₹60,000 INR for top-tier customization.

Looking for an interior designer for our factory spaces, including reception, pantry, cabin, etc., in Ahmedabad, Gujarat, India. We prefer a modern or Western design style. Further details will be discussed with the hired freelancer. The project budget is around ₹60,000 INR for top-tier customization.

I'm seeking an experienced architect or designer to create a modern, minimalist waterfront home. Key requirements: - Style: Minimalist - Key Features: Large windows, open floor plan, outdoor living spaces - Material: Prominent use of concrete Ideal skills and experience: - Proven portfolio in minimalist and modern designs - Expertise in maximizing natural light and creating cohesive indoor-outdoor living environments - Strong knowledge of concrete construction and aesthetics Please share your portfolio and approach. Looking forward to your bids!

I need a complete set of modern residential drawings that celebrate an open floor plan and expansive windows. The goal is to create a bright, flowing living environment where natural light defines each space and indoor-outdoor interaction feels effortless. Scope of work • Translate a rough brief and site information into concept sketches that capture the open layout and generous glazing. • Develop those sketches into permit-ready architectural plans (floor plans, elevations, sections, roof plan, door-window schedules). • Produce a coordinated 3D model and a handful of photorealistic renders so the spatial feel and exterior massing are crystal clear before we move to construction. • Provide PDF sets for council submission and editable CAD/Revit source files fo...

A scanned paper sketch of a commercial floor plan needs to be traced into a clean, editable AutoCAD file. Only the basic outline is required. Deliverables • One fully editable .dwg file • A quick PDF export for visual review Acceptance criteria • Geometry precisely matches the provided scan when overlaid • File opens with no missing references or proxy objects •DRAW HOW IS IN IMAGES. Once the DWG passes those checks, the project is complete.

I'm seeking expert guidance to decorate my modern-style bedroom with a bold color scheme. I'm particularly focused on wall decorations and lighting. Key Requirements: - Modern decor expertise - Bold color scheme integration - Creative wall decoration solutions - Innovative lighting design Ideal Skills: - Interior design experience - Strong color coordination - Proficiency in modern decor trends I'm looking for a professional who can provide tips, ideas, and possibly a design plan to bring my vision to life.

Hi, I’m looking for an experienced AutoCAD/interior space-planning designer for an office fit-out project in a prime location in Dubai. The office is for an Artificial Intelligence company, so I’m looking for a space plan that is not just functional but also modern, attractive, premium and well-designed. The requirements are: - Reception area with visitor seating - Meeting/boardroom for 15–16 people - Large CEO cabin with a lounge/visitor seating area - 2 Manager cabins - Open workstation area for 15 people - Small Accounts room for 1 accountant with a small seating area - Wet pantry - Dedicated server room - Proper circulation and efficient use of space I already have the existing floor layout, which I can share with you. I’m looking for someone with strong ex...

I’m preparing to fit-out our new 2 500 m² corporate headquarters and the brief is straightforward: a striking, thoroughly modern environment that instantly impresses clients and visitors while giving our team an inspiring place to work. The scope is comprehensive—reception, lobby, open workspaces, executive suites, conference rooms, ancillary zones and the surrounding landscape all need to read as one cohesive statement of our brand. Here is what I need from you: • A full interior concept in a crisp, contemporary style—floor plans, detailed elevations and high-quality 3D visualisations that let stakeholders understand the design at a glance. • Material, lighting and furniture specifications that balance aesthetics with durability and maintenance pract...

I'm seeking an experienced architect or designer to create an ultra-premium, rustic-style Kashmiri mountain resort. The resort will be built on a sloping plot measuring 160' × 200' (32,000 sq ft / ~5.88 kanal) and will feature private villas as the primary accommodation type. Key requirements include: Design Style: Rustic, blending seamlessly with the natural surroundings and incorporating traditional Kashmiri architectural elements. Accommodations: Private, luxurious villas, each offering privacy and high-end comfort. Amenities: Essential inclusion of a spa and wellness center, and a gourmet restaurant. Ideal Skills and Experience: Proven experience in designing high-end, rustic-style resorts or similar properties. Strong understanding of local Kashmiri architectur...

Builders have just wrapped up on my project, but the exterior still looks like an active job site. I need someone to clear away all leftover construction materials—wood off-cuts, pallets, scrap metal, nails—as well as any general trash the crew left behind. Once every bit of debris is removed, all exterior surfaces must be pressure-washed, from the walls and siding to the walkways, driveway and any hardscape so the property is ready for final inspection and hand-over. You’ll need to bring your own tools, including a powerful washer capable of tackling cement dust and light paint overspray. Hauling or on-site sorting of debris for recycling or proper disposal is part of the job. When you leave, the site should be spotless, free of hazards, and completely rinsed down. If ...

Architectural & ID Detailed Drawings – Pediatric Clinic Looking for an experienced Architect / Interior Designer to prepare Architectural & Interior Design drawings for a small pediatric clinic. The required layout shall include: * Reception and waiting area * Doctor’s private office/consultation room with private small bathroom * Pediatric examination/treatment room(s) * Storage and required supporting spaces * Furniture layout * Floor & wall finishes * Reflected Ceiling Plan (RCP) * Internal elevations, joinery and detailed drawings * Basic MEP coordination Deliverables: AutoCAD (DWG) + PDF drawings, fully detailed and suitable for site execution. Experience in pediatric/healthcare interior design is preferred. Please share samples of similar projects.

I'm seeking an experienced interior designer to create a modern design for a hotel lobby. The focus is on decorative accents to enhance the lobby's aesthetic. Ideal Skills and Experience: - Proven portfolio in modern interior design, particularly for commercial spaces like hotels. - Strong sense of color, texture, and form. - Experience in selecting and integrating decorative accents such as artwork, plants, and sculptures. - Ability to work within a budget and provide cost-effective solutions. - Excellent communication skills for collaboration and updates. Please share your portfolio with your bids.

I will have full PDF set of architectural and interior drawings and need every measurable item pulled straight from those sheets. The goal is to create a complete quantity take-off that I can hand to both the estimator and the procurement team without further editing. Need an Experience preparing BOQs for luxury villas, residential, and interior fit-out.

Prepare a complete 3D steel fabrication model and workshop drawing package on the supplied structural engineer drawings and connection details. This is not a structural design project. The work is limited to fabrication-ready detailing and interpretation of the supplied drawings. Files Provided Ground floor steelwork layout First floor / roof steelwork layout Steelwork sections First floor connection details Roof connection details Architectural elevations and sections for coordination Use the latest construction revisions (C2/C3) included in the uploaded drawing package. will propvide more info via chat.

I already have a completed site plan for a property in Pennsylvania that show a new driveway layout. Before I submit it to the city I need a Pennsylvania-licensed design professional to give it a final technical review and place their professional seal on the drawing. The drawing is finished, so I’m not looking for design changes—just a careful check to confirm it meets state and local requirements, followed by your approval stamp. Deliverables • Marked-up PDF (if you find any minor corrections) • Final signed and sealed PDF ready for municipal submission Please let me know your turnaround time, and any questions you have about the file format or city submittal standards. Within a budget, I just need drawings sealed.

I need a stamped boundary survey of my vacant Philadelphia lot and a complete set of zoning drawings that the city will accept for a permit. The goal is to turn the parcel into a private driveway with drive-through access and legal curb cuts at both street fronts. Because there is no existing survey or prior drawing, the work starts from scratch. I will rely on your field measurements, research into city records, and any required coordination with Philadelphia’s Department of Streets and Zoning. Once the survey is set, I’ll need an architect-prepared site plan showing pavement layout, curb-cut dimensions, grading, storm-water notes if required, and any other details the permit counter typically asks for. Deliverables (PDF and CAD preferred): • Signed boundary/topogra...

I need a skilled contractor to design and build a 16-space RV campground with an additional multi-use building. The additional building should include: - 2 Apartments - Laundry Room - Camp Store - Possible Showers Ideal skills and experience: - Experience in campground construction - Knowledge of local zoning and building regulations - Ability to design functional multi-use spaces - Experience in plumbing and electrical work for laundry and showers Please provide a portfolio and relevant experience.

We are converting our loft into a habitable room and the new dormer is almost ready now. However we've reconsidered the original place of the new loft staircase and now we need the front chimney breast disconnected at the loft level (to be removed) and the remaining chimney stack above - supported; as well as calculations and drawing of a new loft staircase opening which will be in the place of the removed chimney. Attached, you can find more details - hope these explain things better. Please let me know if you could help. Look forward to hearing back,

# Office Interior Designer Needed for Complete Commercial Office Design We have recently taken a new office space and are looking for an experienced **Commercial Office Interior Designer** to design the complete office interior. We already have: * Video/photos of the empty office space * Existing floor/layout plan provided by the housing board * Measurements/layout information of the space We need someone who can understand the existing space and create a **practical, modern and professional office interior design** around it. ## Scope of Work The designer should provide: * Complete office space planning * Reception area design * Workstation/seating layout * Founder/Director cabin * Meeting room * Employee seating arrangement * Storage requirements * Pantry area * Electrical point p...

I'm looking for a skilled structural engineer to assist with a residential renovation project. The specific task involves the removal of a header from a pantry. Key requirements include: - Expertise in residential structural modifications - Ability to assess and ensure structural integrity post-modification - Provide detailed plans and calculations Ideal Skills & Experience: - Licensed structural engineer - Experience with residential projects - Strong knowledge of building codes and regulations Please include relevant experience and credentials in your bids.

CAD & CorelDRAW Designer Required – Wayfinding Signage Looking for an experienced designer with AutoCAD and CorelDRAW skills for wayfinding and directional signage projects. Requirements: * AutoCAD & CorelDRAW expertise * Experience in signage/wayfinding design * Shop, fabrication & installation drawings * Good knowledge of signage materials and detailing * Accurate and professional work * Infrastructure/railway/metro signage experience preferred Please share your portfolio, experience and quotation.

I have a set of existing design concepts for a custom kitchen and now need them translated into full AutoCAD shop drawings that a cabinet maker can take straight to the workshop. Every sheet must carry complete specifications with joinery details, right down to the last hinge. What I will give you • PDF/DWG concept drawings and finish schedules • Overall room dimensions and appliance schedules What I need back • Scaled plan, elevation and section views for every cabinet run • Detailed joinery call-outs showing carcass construction, door styles, shelf pins, etc. • Cabinet framing details, handles & hardware positions, and all required electrical and plumbing cut-outs clearly dimensioned • A cutting list (board, edge tape and hardware) ready ...

I need a complete MEP package for a new residential build of roughly 350 m² spread over three floors, with two separate apartments on each level. Your focus will be on two disciplines: • Plumbing – I already have the fixture layout, so I’m looking for drawings that show the full water-supply and drainage routes, plus detailed specs and pipe sizes for every run, valve, and connection. • Electrical – Kitchens and bathrooms are the priority; I need circuiting, load calculations, panel schedules, and placement of outlets, switches, and protective devices that comply with local residential codes. The final delivery should include coordinated CAD/Revit drawings (PDF + editable files), a concise calculation report, and any installation notes that a contractor ...

I'm seeking a skilled floor plan designer to create a two-story residential floor plan. The home should feature a distinctive circular shape with an open dome at the center. Key requirements: - Two-story residential layout - Circular design with central open dome - Attention to spatial flow and natural light - Experience in unique architectural designs according to Indian climatic conditions. Ideal candidates will have: - Strong background in residential floor plan design - Expertise in unconventional building shapes - Knowledge of Indian building codes and regulations - Proficiency in design software (AutoCAD, SketchUp, etc.) Please provide samples of similar work and a brief approach to this project.

I need a licensed Ontario Land Surveyor to visit a residential lot in Rockwood as soon as possible. The main goal is boundary verification, with a particular focus on confirming that the freshly poured foundation sits within the required setbacks. Because I have no previous survey documents, you’ll be starting from scratch: establishing accurate boundary lines, marking (staking) the corners and key points on-site, and then tying those points to the new foundation walls. Please include in your proposal: • Your OLS licence number or firm registration • A brief outline of the field work you’ll perform (total station, RTK GPS, etc.) • The format of the deliverable—at minimum, I need a signed sketch showing boundary dimensions, stakes placed, and the meas...

The site plan for my property needs a professional landscape‐design drawing that highlights two key elements: an inviting network of pathways/walkways and at least one signature water feature. I already have a rough sketch and measurements; what I need now is a clean, to-scale drawing (DWG/PDF) that a contractor can build from without guesswork. Scope • Translate my hand notes, photos, and site measurements into a detailed CAD layout. • Show pathway widths, surface materials, slopes, and junctions clearly. • Illustrate the water feature’s footprint, depth, pump location, and connections to power/water. • Indicate existing trees and major plant beds only as context—full planting design is optional and can be quoted separately. Acceptance Criteria ...

I'm seeking a skilled designer to create a floor plan for a modern-style barndominium. The layout must be functional and aesthetically pleasing, incorporating the following requirements: - 2 bedrooms and 2 bathrooms, with both bedrooms on the same floor. - Future loft space to be included. - Open-concept living area that promotes a spacious, airy feel. Ideal skills and experience: - Expertise in modern architectural design - Experience with barndominium layouts - Strong understanding of open-concept living spaces Please provide samples of previous work and a rough timeline for completion.

I need a licensed land-survey professional in Philadelphia, PA to document an adjacent lot that will soon be converted into a driveway. The survey must be accurate enough for legal documentation with the county, so all measurements and drawings have to meet local standards for stamped survey plans. Scope • Precisely locate and record the lot’s current boundaries (only if it helps reference the new drive) and capture exact driveway dimensions—length, width, and any required setbacks. • Supply a clean, scale-drawn plat showing the proposed driveway layout, bearings, and linear measurements. • Provide a full photo set: aerial views (drone or equivalent), eye-level ground shots, and close-up detail images that clearly show surface conditions and any obstacles....

I have a full set of architectural drawings in PDF that must first be traced or converted into clean, fully layered DWG files. Accuracy is key: every wall, opening, fixture and level needs to carry through at the correct scale so I can use the files for permitting and future modifications. Once the as-built drawings are ready, I’d like you to take the project a step further and develop a comprehensive modernization strategy covering both the interior and the exterior. Think updated layouts, refreshed façades, contemporary materials, improved circulation and better use of light—everything that will bring the property up to today’s aesthetic and functional standards. Deliverables • Editable DWG set that mirrors the original PDFs • Concept redesign dra...

I'm looking for an experienced architect or designer to create plans for a traditional-style, two-story residential house on a detached single plot. The design should incorporate ample front, rear, and side land. Key requirements: - Traditional architectural style - Two-story layout - Utilization of surrounding land Ideal skills and experience: - Expertise in traditional home designs - Experience with two-story residential layouts - Strong understanding of land utilization Please provide examples of similar work.

I already have the complete architectural drawings in DWG/PDF and now need a detailed under-floor heating (UFH) layout for the entire building. The plan must show every zone, manifold and circuit clearly so that the installation team can build straight from the drawing. Here’s what I expect: • A fully coordinated UFH plan in AutoCAD with correct pipe spacing, loop lengths and labelled circuits, keeping each loop within recommended limits. • Legends, notes and a simple pipe-length schedule included on the sheet for quick material ordering. Deliverables: • Editable AutoCAD (.dwg) file on the same coordinate system as my base plans. • Print-ready PDF set. • Pipe-length schedule (embedded table or separate XLS). If you have proven UFH design experience...

I need a Florida-licensed structural engineer who can work on an upcoming structural project. The scope calls for full structural analysis and design, a thorough building-code compliance review to satisfy state and local jurisdictions, and ultimately an inspection report with the engineer’s signed certification. If you are currently licensed in Florida and have recent experience producing permit-ready structural packages under the Florida Building Code, I’d like to hear how quickly you can begin and what information you would need first.

# TopSolid Wood Specialist Needed — Custom Kitchen Furniture Assembly (Ongoing Monthly Work) ## About Us WERDEN is a premium kitchen and interior furniture brand based in Baku, Azerbaijan, with our own showroom and in-house CNC production facility. We design custom kitchens and interiors for local and international clients. ## The Job We provide you with AutoCAD drawings and on-site measurements for a kitchen project. Your job is to assemble the full project as a working, production-ready model in **TopSolid Wood** — correct panels, dimensions, materials, hardware placement, and door/cabinet structure — matching our design and production standards exactly. The final file must be fully editable and ready to send straight to CNC (correct part separation, nesting-ready, a...

We are converting our loft into a habitable room and the new dormer is almost ready now. However we've reconsidered the original place of the new loft staircase and now we need the front chimney breast disconnected at the loft level (to be removed) and the remaining chimney stack above - supported; as well as calculations and drawing of a new loft staircase opening which will be in the place of the removed chimney. Attached, you can find more details - hope these explain things better. Please let me know if you could help. Look forward to hearing back,

I’m preparing to develop a ground-plus-two building for retirement community. Location: Palakkad municipality, Kerala, India 7m Road on south side AI can be used for ideas and designs needs to be on CAD. Needs to be 100% VASTU Following are minimum requirements: 1. One floor with reception, nursing station, lift, 2 stair cases (One for fire), Maid room with bath attached, sr living master suite (bedroom, reading area, walking closet and bathroom) , kitchen, poojaroom, living room, parking 2. Another floor with 4 individual bedrooms with attached bath room, common living space. linen rooom, utility room, pantry 3. Next floor with 2 individual bedrooms with attached bath room and a sr couple suite (bedroom, reading area, walking closet and bathroom), gym Exact plot dimensionsare ...

I need a full set of architectural construction drawings for a new apartment building produced in AutoCAD, formatted on A3 sheet sets. An outline schedule is already prepared and attached; once we start, I will forward the base architectural files and any additional reference material you need. Scope of work • Produce coordinated floor plans, sections, elevations and all related construction details exactly as indicated in the attached drawing schedule. • Maintain my title-block standards and layer naming. • Supply each submission in both PDF and native .dwg. Milestone flow 1. 20 % – Tasks 1 & 2 completed and issued for review 2. 50 % – Tasks 3 & 4 3. 80 % – Tasks 5 & 6 4. 90 % – full-set markup revisions returned and inc...

Title: Victorian Building Designer and Permit Coordinator – Ongoing Work We are seeking an experienced building designer and permit coordinator to manage the complete post-sale documentation and building approval process for a range of standard expandable cottages in Victoria, Australia. This is not simply a drafting job. We need a reliable person who can take each customer project from initial site information through to completed plans, consultant coordination and building permit approval. Our business has established 20ft, 30ft and 40ft expandable cottage models. The core designs are standardised, but each project requires site-specific documentation, coordination and approval. The successful applicant will initially complete one paid pilot project. If successful, this will b...