Engineering Drawing Jobs

Please Sign Up or Login to see details.

I need a complete electric-motor design tailored for heavy-duty industrial machinery where sustained, high torque is the overriding requirement. The project covers the full engineering cycle—from concept sketches and electromagnetic calculations right through to detailed 3D CAD models, winding data, thermal analysis and a bill of materials ready for prototyping. Key objectives • Deliver continuous high torque at typical industrial supply voltages • Maintain reliability in harsh, high-duty-cycle environments • Meet common efficiency standards—compactness and energy savings are welcome bonuses, but raw torque matters most Your package should include: 1. Electromagnetic design files (Maxwell, Motor-CAD or equivalent) with clear performance plots 2. Mecha...

I’m ready to move from concept to fabrication for a 60 ft-long × 50 ft-wide portal-frame cattle shed with 15 ft eaves. The structure will be in mild steel, so every calculation, drawing and schedule needs to reflect that material choice. Scope Your package should take the shed from initial member sizing all the way to workshop fabrication, leaving nothing for my fabricator to guess. I require: • Steel member sizing and haunch geometry, fully calculated and clearly referenced. • Connection detailing (beam-to-column, rafter apex, base plates, side-rail and purlin fixings). Weld sizes and bolt grades must be specified to current standards. • General Arrangement drawings at “detailed layout with dimensions” level—plan, elevations and secti...

I need a licensed Structural Professional Engineer (PE) to approve a design for a Polypropene Plastic tank with a capacity of over 1000 gallons, which will be used for water storage. The tank will be installed above ground, indoors. Key requirements: - Provide structural integrity analysis - Ensure compliance with local building codes - Submit sealed approval drawings Ideal skills and experience: - Licensed Structural PE - Experience with large capacity tanks - Knowledge of Polypropene material properties - Familiarity with indoor installation requirements Looking for a detailed, code-compliant approval. The Prints attached titled "Spray Water Tank" is from our customer and is currently approved as a Steel Tank and the customer is wishing to make this tank using 1" thick...

I need a Florida-licensed structural engineer who can work on an upcoming structural project. The scope calls for full structural analysis and design, a thorough building-code compliance review to satisfy state and local jurisdictions, and ultimately an inspection report with the engineer’s signed certification. If you are currently licensed in Florida and have recent experience producing permit-ready structural packages under the Florida Building Code, I’d like to hear how quickly you can begin and what information you would need first.

Our client, a Malaysian innovator intends to file a Utility Innovation (UI) application using Patents Form No. 14 for an improved version of the existing tilting sterilizer (details will be provided later) . The core improvement is the addition of a vibration or air-pulse assisted discharge system near the outlet to prevent bridging and improve discharge reliability. The patent agent requires complete, accurate and well-organised technical information to prepare the specification, drawings, single claim and abstract. This brief sets out exactly what the engineering team must prepare. 2. Summary of the Proposed Innovation Modification: Vibration means and/or air-pulse means located near the outlet of the tilting sterilizer, activated during the discharge phase. Purpose: To facilitate gravit...

I’m setting up a steady, month-to-month engagement with a seasoned Tekla Structures professional who can own the full detailing workflow on a series of industrial projects. Every month I’ll pass you new steel packages that need to move seamlessly from concept to fabrication, so I’m counting on your deep command of Tekla to keep the pipeline flowing. Scope of work – Build clean, well-organized Tekla models straight from my IFCs, sketches, or PDF mark-ups. – Produce all GA drawings, assembly drawings, single-part sheets, and NC/DSTV files ready for the shop. – Generate bolt and material lists plus any custom reports I request so purchasing can cut POs without delays. What I’m specifically after You’re a senior-level detailer who has a...

Please don't bid if you are not certified for PA, USA. I need a licensed professional to stamp my detailed pole barn drawings for Pennsylvania approval. The barn is residential and under 1,000 sq ft. Requirements: - Must be licensed in Pennsylvania, such that City of Easton can approve it. - Experience with residential pole barn structures - Provide a stamped drawing for code compliance Ideal Skills: - Structural engineering - Knowledge of PA building codes - Attention to detail and accuracy

I want a licensed structural engineering service for a new Florida one floor house 2,331 heated sf 610 unheated sf wood roof truss and interior walls . Concrete block exterior walls The work involves designing the elements required by the current Florida Building Code. Deliverables I’m expecting: • Signed and sealed structural drawings ready for permit submission • Calculation package showing load paths, wind and uplift checks, and material specs • Brief response sheet to address any comments that may come back from the reviewer

I am building a proof-of-concept rover whose only job is to prove that controlled, repeatable motion is possible inside transformer oil. To make that happen I need a complete blueprint package—detailed engineering drawings rather than a simple overview—showing exactly how to propel, steer, and recover a small test vehicle submerged in this highly viscous fluid. Rather than propellers, tracks, or wheels, I want the craft to move by exploiting buoyancy. Your design should use the density difference between the rover and the oil to generate thrust and directional control. This should not create any bubbling in oil while movements. Critical elements of the buoyancy control system that must appear clearly in the drawings • Adjustable weights • Air / water pumps Ev...

We are looking for an experienced structural engineer/FRAMECAD specialist to prepare the complete LSF framing design based on the attached architectural drawings for an industrial project in Samail, Oman. Scope of Work: 1. Administration Building 2. Main Warehouse / Industrial Hall 3. Guard House All buildings shall be designed using the FRAMECAD cold-formed steel framing system. Exclusion: The separate Storage and Toilet/Service Block located at the rear of the warehouse is entirely excluded from the scope. Required Deliverables: * Structural design and calculations * Complete FRAMECAD model * Wall and roof framing layouts * Panelization, bracing and connection details * Member sizes and schedules * Fabrication/shop and erection drawings * Material/steel quantity take-off * Foundat...

I need corrections on my ADU plans that are already submitted to the city. The corrections are primarily focused on code compliance and utility connections. Key Requirements: - Review and modify the plans for code compliance. - Adjust utility connections as per city requirements. - Ensure all changes are in line with city regulations to facilitate approval. Ideal Skills and Experience: - Expertise in ADU design and city regulations. - Strong background in code compliance, especially for residential projects. - Proficient in modifying utility connection layouts. - Experience with city submission processes and revisions. Looking for a detail-oriented professional to ensure my plans meet all necessary criteria for approval.

I need a structural engineer for a residential building project. There are two things I would like to do: - I would like to remove a wall from my house and want to make sure it’s okay to do so/ what we would need to do to make it safe. - I would like to raise the roof of the second story to make a full second floor (currently much of the floor space is behind knee knee walls due to a a low roof line. Open to negotiation on whether to pay hourly or fixed. Ideal skills and experience: - Licensed structural engineer - Experience with residential structures - Proficiency in load calculations - Knowledge of building codes and regulations - Attention to detail and accuracy Please provide relevant qualifications and experience in your bids.

I own an otherwise sound vintage typewriter, yet its typing action feels sluggish compared with modern expectations. My sole aim is to enhance functionality—specifically the typing mechanism—so that it achieves noticeably faster stroke-to-print speed without compromising durability or the machine’s classic feel. What I need from you • Diagnose the existing key-lever, escapement and linkage timing, identifying every point that causes drag or delay. • Engineer practical modifications—re-tensioning springs, refining linkage geometry, upgrading bushings, or suggesting new materials—that will cut the cycle time of a single key press. • Supply clear technical documentation: annotated photos or CAD drawings of each proposed change, a parts list,...

Please Sign Up or Login to see details.

I need a fully parametric lower suspension control arm modeled in SolidWorks for an aluminum-alloy application that meets prevailing OEM standards. The part must include all typical features—mounting bosses, bushing housings, bolt holes, reinforcing ribs, generous yet realistic fillets, and thoughtful weight-reduction pockets—while maintaining structural integrity, manufacturability, and accurate fitment to the subframe. Once the 3D model is complete, I also require a production-ready 2D drawing that calls out every critical dimension, GD&T frame, hole specification, surface-finish note, and tolerance needed by a machine shop. Pay particular attention to clearance envelopes around bushings and ball-joint hardware so the arm drops straight into an existing chassis without r...

I have completed a set of engineering drawings for a new septic system and spray irrigation area that utilises an Aerobic Treatment Unit (ATU). Before I submit anything to council, I need a Queensland-registered RPEQ to confirm that the design complies with all relevant state and local on-site sewerage regulations and then place your official stamp on the drawing set. You will receive the current PDF/DWG plan, design calculations, soil report and manufacturer literature. Your role is to: • Review the entire package with a focus on full regulatory compliance, especially the layout, hydraulic capacity and land application area sizing. • Mark up or note any minor amendments needed so the design can be certified without reservation. • Once satisfied, issue your RPEQ sign-o...

SPOOLFAB PIPING ISOMETRIC DRAFTER — DISCOVERY CALL / EXPLORING A POTENTIAL ONGOING RELATIONSHIP (OIL & GAS FABRICATION) WHAT THIS POSTING IS This is a discovery post, not a bid request. We are not asking for a formal quote, a firm rate, or a committed turnaround time at this stage. We're simply trying to find out whether experienced SpoolFab drafters are out there who'd be interested in exploring an ongoing subcontract relationship with us, and to have an initial conversation about fit, experience, and general capacity before either side commits to anything. If there's mutual interest, we'll follow up with a real scope of work, you'll propose your pricing against it, and we'll provide a small pilot batch to get started. ABOUT THE WORK We are a pi...

I need a skilled mechanical CAD designer to create fully engineered blueprints for our equipment. These designs will be used for manufacturing purposes. Ideal skills and experience include: - Proficiency in CAD software (e.g., AutoCAD, SolidWorks) - Experience with industrial equipment design - Ability to create detailed, accurate, and manufacturable blueprints - Strong understanding of engineering principles and manufacturing processes Please include samples of previous work and a brief overview of your relevant experience in your bids.

I am developing a portable outdoor golf entertainment game for the Australian market and require an experienced mechanical/product designer to develop the concept into a CAD and engineering package suitable for obtaining manufacturing quotations from China. The product is intended for backyards, camping, parks, BBQs, holidays and social events. It is an entertainment game rather than a professional golf training product. The current concept consists of a lightweight artificial-turf target board with four scoring holes. The board folds approximately in half for compact transport and storage and incorporates simple folding legs. Current approximate dimensions are: • Open: 900 mm × 550 mm • Folded: 450 mm × 550 mm • Target board weight: ≤3 kg if technically a...

I need a local engineer to assess soil conditions for a small residential project in Truckee. Requirements: - Assess soil bearing capacity - Determine footing diameter, depth, reinforcement, and beam and post-base details and connectors. - Area: 96 sqft -structure is down slope at approx 10 and 15 degree angel. - some of the dirt on the down hill side has been removed and placed there in efforts to make a level play surface for my son. It is unsettled approx 1 1/2 feet. Ideal skills and experience: - Civil or structural engineering background - Experience with soil assessment and foundation design - Knowledge of local building codes and regulations

My new residential shed will measure 12 m long, 7 m deep and 3 m high and I need a Queensland-registered engineer (QBCC licence essential) to certify my drawings after advising of material specificiations. The layout is an open floor plan with no internal walls, so the design must clearly show adequate framing, footings and bracing to satisfy current NCC and AS 1170 wind load requirements for my region (C2 - Cyclonic Zone) What I am expecting from you • Signed and stamped structural drawings in PDF • A concise calculation package that supports the member sizes and connection details you specify I will supply the site address, soil report and preferred cladding specs as soon as we start. I will provide the drawings upon you advising specs on material members to use. I&rsqu...

I'm seeking an engineer to recommend a center load beam with a center support post for a 16-foot span in a single-story residential construction. The beam will be exposed, so aesthetic considerations are important. Requirements: - Recommend a suitable wood beam - Consider structural integrity and aesthetics for an exposed design Ideal Skills and Experience: - Structural engineering expertise - Experience with residential wood beam design - Knowledge of load-bearing requirements and aesthetic integration

I need a qualified civil designer to prepare a complete gravity-sewer extension and service stub for an existing lot in Redlands, Queensland. The design must be ready for lodgement and works approval with Redlands City Council, so it has to follow all current SEQ Code and Council standards. Sewer and Water services are constructed by Redlands Waater. Scope The job is limited to pipe work only—no manholes (existing in place) or junction structures are needed. You will determine the optimum alignment, grade and cover, size the pipes, and show the tie-in to Council’s existing main. All drawings, long-sections and supporting calculations must be supplied in a format the Council accepts (DWG/PDF plus editable spreadsheets). I typically work in AutoCAD Civil 3D, but you can use...

I have a dismantled 60' × 100' Heritage Red Steel covered horse arena that is now sitting on its new site in Madera County. The original, engineer-signed drawings are complete, unchanged, and come with the prior jurisdiction’s approval letters. All I am missing is a fresh 2022 Madera County structural stamp that confirms the set still meets the latest county building code updates. What I will provide: • Full original plan set in PDF and CAD • Previous approval documents for reference • Photos of the disassembled components, should any visual confirmation help What I need from you: • Review the existing calculations and details • Identify any code-related items that require notation for Madera County’s current amendments • Affix yo...