SMS Controller with Communications

Closed

Project Description:

SMS Alert (2 way messaging)

The device will need to consist of the following items:

1. Power

2. GSM Communications

3. 5 analogue inputs

4. 3 Analogue outputs

5. 3 LEDs (1 GREEN 1 RED 1 AMBER)

6. 1 Buzzer

7. The device must have an ability to be updated on specific fields, either by SMS or by port interace.

1. Power:

a. The device should have an internal battery but also be able to be powered by 240V 50Hz power.

b. The LED Amber must indicate power to the device

2. GSM Communications:

a. The device needs to be able to send and receive SMS’s and be able to have a setting to program from which number(s) it may receive an SMS

b. On receipt of Command 1: the device needs to show LED Green

c. On receipt of Command 2: the device needs to show LED Red and give 5 short beeps every 15 minutes

d. On receipt of Command 3: the device needs to show LED Red & Green Flashing and give 5 short beeps every 1 hour

e. On receipt of Command 4: the device needs to show LED red and no signals

f. On receipt of Command 5: the device must allow LED Green to be on permanent and Amber to Flash

g. On receipt of Command 6: the device must Set LED Amber to On for Power On and LED Green Permanently On.

h. On Receipt of Command 7: the device must let all three LED’s FLASH

3. 5 Analogue inputs:

a. On activation of any input the device is to send an SMS to a pre-programmed number indicating it’s Unique ID and the Input that activated the SMS. This is to be sent in a text format for example 0123456789,1

b. When an analogue device has activated a signal LED green & LED Amber must flash

4. UPDATE Commands:

a. The device must be able to be programmed for which number(s) may send it a command (and this may include ALL numbers may send – factory default)

5. Analogue Outputs:

a. On receipt of a command and output port it needs to activate the switch as on or off as per the command. EG: 10,00,1 for command 10,port 0, ON

The PC Board should display (c) Bernhard Hiltemann 2013

Attached is a document outline the functionality of the commands.

Skills: Electronics, Manufacturing, Microcontroller, PCB Layout

See more: sms gsm, LED display, flash sms, communications, analogue, amber, project led manufacturing, led project program, device controller, flashing led, sms project receive, led manufacturing project, internal communications, unique short sms, short sms, sms alert device, sms send specific port, send commands sms, analogue input, buzzer led, project sms gsm, numbers receive sms, sms commands, gsm sms switch project, need receive sms

Project ID: #4647404

34 freelancers are bidding on average $682 for this job

jobykpaul

Very easy project for us... Award the project if you are interested

$789 USD in 30 days
(35 Reviews)
7.4
MikroStar

hi, i am an electrical engineer and an embedded system designer. i can help you with this project.

$3500 USD in 45 days
(32 Reviews)
6.3
bbk

I can make your project

$300 USD in 30 days
(18 Reviews)
5.1
ahmedmohamed85

Dear sir, I have more than 5 years experience in digital design please check your PM

$666 USD in 25 days
(12 Reviews)
5.0
Mathilda33

hello! i can do this work.

$300 USD in 25 days
(17 Reviews)
5.0
stemtechnologies

We can make the SMS using Quectel M10 or M95 modules REgards Soma

$388 USD in 3 days
(1 Review)
4.4
shahbaz1980

Hello Check your PMB.

$233 USD in 20 days
(7 Reviews)
3.7
DamithaKD

Read Pm sir :)

$283 USD in 3 days
(2 Reviews)
2.6
vikramkadiaan

Hi I am a experienced embedded engineer and can complete the whole project,Lets discuss

$333 USD in 25 days
(1 Review)
2.1
vivekgajera

I can do this work.please check your pm

$333 USD in 8 days
(1 Review)
1.5
lamvantruong

Hello, I can do that. Thanks

$611 USD in 20 days
(0 Reviews)
0.0
AmmadRehmat305

Hi , We are a team of R&D engineers and we have worked a lot on GSM projects. This is a fairly simple project and we can get it ready in 15 days. Send us a PM to see sample work. Keep in mind we have a lot experience w More

$555 USD in 15 days
(0 Reviews)
0.0
azappia

I have recently developed a computer hardware with similar characteristics using a siemens module, I can do the job.

$850 USD in 3 days
(0 Reviews)
0.0
embfocus

we are embedded electronics consulting and production company offering end to end services in product development. If your seriously looking for a quality vendor for long time support we are there to provide it with 10 More

$1111 USD in 30 days
(0 Reviews)
0.0
KimYong

Please check the PM.

$666 USD in 30 days
(0 Reviews)
0.0
vardhansonu

Hi give me one chance to do the project.I will prove myself suitable for your requirement.

$155 USD in 3 days
(0 Reviews)
0.0
BienNguyen

Hi buddy, we have experience about GPS/GSM communication. Please check my private message.

$2000 USD in 30 days
(0 Reviews)
0.0
mayankvagadiya

Hello see my portfolio. We do same as you want.

$234 USD in 9 days
(0 Reviews)
0.0
XtremeEHS

hi, do you need help.

$222 USD in 3 days
(0 Reviews)
0.0
k03ak

Hi! We are a team of electroncs engineering prosessionals with more than 25 years of experience in electronics design field. Can make this project for you easily. Please contact for clarification.

$300 USD in 20 days
(0 Reviews)
0.0