Cancelled

I need autocad draftsman mainly for MEP works

Most of the drawings have been done. But need the following:

1. Final review, it means I give you a comment on each drawing, some drawings have very little to add

2. General layout of the drawings to be uniform for all along with a legend and document numbering

3. Addition of few more drawings

The reason is that the drawings are being done by the subcontractors, and I need to unify the final set of drawings to be neat and ready for execution.

Most of the drawings needed are electromechanical and not Civil.

The project is a 2 floors each floor is around 250 sqm.

The civil work is done by the main developer of the building. The project is to fit out the inside with MEP .

So the main drawings needed, are for cable trunks, cable running and E&M …

Like CCTV, Access control, BMS, Air conditions…

Dear All bidders,
I am going to cancel this project and open multiple projects for each E&M system that requires work. I am working on preparing detailed description for each so that you can directly know how much time it takes for you to be able to make a good bid. the budget of each project will be less than this one, but the sum of all budgets will be equivalent.
the systems will be :
1. CCTV
2. ACCESS CONTROL
3. BMS
4. Fire Detection
5. Fire suppression
6. Power Cabling
7. LAN Cabling
... and several others
all will be defined as earlier stated, and even illustrated using a basic drawing tool, you will need to sketch it on autocad, and give me the measurements of the cables.
best regards,

Skills: AutoCAD, CAD/CAM, Electrical Engineering, Engineering, Mechanical Engineering

See more: need autocad draftsman, i need a draftsman, general floor, general cable, execution drawings, engineering drawing i, electromechanical engineering, draftsman autocad, review drawings, mep works, mep work, electromechanical, Draftsman civil, civil works, Civil engineering works , CIVIL ENGINEERING PROJECT, civil building, autocad work , autocad civil, autocad 2, cctv drawing autocad, autocad project need, cctv autocad drawings, sqm drawing, civil autocad project work

About the Employer:
( 21 reviews ) paris, France

Project ID: #5490786

31 freelancers are bidding on average $1730 for this job

almiradjo

Hello! I am interested. Posses extensive experience in AutoCAD. I am not MEP expert so I could work only by your sketches or instructions. Hope to hear from you. Best regards!

$1580 USD in 15 days
(249 Reviews)
7.4
ahmedhamdypop

Dear Sir, This is Ahmed Hamdy an Industrial and CAD Engineer for more than 8 years, I'm working as R&D Engineer for 4 years, I can do this project in a very very short time with a high quality with the lowest price I'm More

$2000 USD in 15 days
(38 Reviews)
5.6
ArchVerica

Hello, I"m licensed architect with 7 years of experience in Building Architecture and I will be glad to help you with this project. Best regards, Verica

$1500 USD in 20 days
(25 Reviews)
5.3
bernatolentino

Hi! I am the best provider for this job. I have done similar project like this. I'm interested to your project I'm Berna from Philippines. An Architecture Graduate and an Assistant CAD Manager with 7 years of Experi More

$1500 USD in 10 days
(40 Reviews)
5.5
reyyaricha

Hi, Hi This is Richa Reyya and I run a small India-based 3D visualization company and we serve Architects, Builders and Engineers. We provide 2D drafting and 3D services for our clients. We have experien More

$1500 USD in 10 days
(10 Reviews)
4.8
ntltech

Hi, I'm an electrical engineer with 20 years of experience in the engineering and construction for E&M systems. I'm currently working with 3 desginers on delivering the highest quality of service to our Clients. It More

$1666 USD in 30 days
(20 Reviews)
4.9
SsArchi

Hi There, I am a building designer/architect located in Sydney Australia and would like the opportunity to work with you on your project to your specified scope of works. I have Autodesk REVIT and AutoCAD certificat More

$1684 USD in 21 days
(8 Reviews)
5.3
saifie

Hi, Great chance for you to get good quality work with low price!!!!!!!!!!!! We are a team of engineers named as JSM Services having more than ten years experience in the field of design and analysis. We are introduc More

$1500 USD in 20 days
(23 Reviews)
5.1
klikrz

Contact me, If you require any model done in 3ds max (importable to almost all of the 3d softwares or for 3D print), or any of the 3DS Max + VRay Photorealistic 3D Renders. For my skill and expertise refer to my Portf More

$2368 USD in 30 days
(9 Reviews)
4.8
chyconsl

HI, I have done similar projects in the past. I will like to use my experience to serve you better. You can trust my sincere indulgence both in quality and time frame. If you will give me a chance, I will ensure that y More

$1666 USD in 30 days
(4 Reviews)
4.3
rodeltolentino

Dear Sir, I'm an Architect with extensive working experience in my field. Has more than 7 years experience in my profession. Creative, professional, miticolous, detailed person, I do Site inspection as QC Officer. I More

$1500 USD in 7 days
(3 Reviews)
3.4
rahulvikhe

Very good in drawing reading, drawing making and understanding final requirement. please reply on this.

$2500 USD in 30 days
(3 Reviews)
2.5
FarukACad

Hello My name is Faruk Beglerovic and by profession I am civil engineer. I posses many years of experience in AutoCAD 2D and 3D design and I am confident that I will be able to complete Your job very fast and More

$1500 USD in 15 days
(3 Reviews)
1.7
shshr7

I have experience in CAD conversion and CAD drafting. I guarantee, you will be happy with my services. Send me sample file, text files, your title block and ctb file. I shall give you back a seamless drawing; it will l More

$1666 USD in 30 days
(3 Reviews)
1.1
tom9696

Hi, I am happy to work in this project since I have been working in design filed since 2006. I have experiences in AutoCAD drafting, 3d modelling and rendering works.. You can have a look at my professional portfolio More

$1500 USD in 4 days
(1 Review)
0.8
HydroExpert

I have practical experience in the Layout and placing MEP facilities in huge buildings/Hospitals and one stadium. So i would appreciate if you send me the file, then I can see the volume of work and will let you know t More

$1666 USD in 30 days
(1 Review)
0.8
mohamedelshahawy

I am an electrical engineer and I am very good in AutoCAD. So i think i am the right person to do this job.

$1500 USD in 10 days
(1 Review)
0.0
amrutsutar

A proposal has not yet been provided

$1777 USD in 30 days
(0 Reviews)
0.0
robertoenriquez

I am a civil Engineer that have been working in MEP instalations for 5 years and have a certificate from Autodesk that validate my skills and knowledge in Autocad 2013. Your work will be done and neat in no time.

$2500 USD in 5 days
(0 Reviews)
0.0
BIMabettor

Successful in the market place for over 25 years demonstrates endurance, commitment, and expertise. If you want to have your project done correctly without the stress, you want me to do it. Thanks

$1666 USD in 30 days
(0 Reviews)
0.0