Product design and engineering services, also CAD/animation

Budget N/A
Bids 87
Average Bid $423

Small U.S. based idea-rich R&D firm looking for a product design/engineering firm or individual for numerous new products, including preparation of 2D and 3D drawings.

Inventions are mostly simple electro-mechanical devices including consumer and pet products and some alternative energy-related inventions, but some projects may be more involved.

Animation/slide-show and illustration for marketing purposes needed as well, so it's a plus if you are skilled at this, but that is not the primary project.

Also need assistance with product marketing and licensing, primarily in the US markets. Open to partnering in global markets.

IMPORTANT:
Must be highly dependable, consistent, fully available (please don't bid if you're working or attending school full-time or are already very busy and just doing this as a hobby) and must speak/write fluent US English.

There will be frequent projects on an ongoing basis for the right person or firm.

Post a Project Like This

Looking to make some money?

  • Set your budget and the time frame
  • Outline your proposal
  • Get paid for your work

Bids on this Project

  • jagdish138 Profile Picture

    jagdish138

    pune,  India

    I have exp in manufacturing industry for initial 2 yrs if my career age then moved to design dept with casting ,forging ,plastic sheet metal etc component design

    Internet Marketing, Windows Desktop, Engineering, and Training

  • inams Profile Picture
  • suhasdeshmukh Profile Picture

    suhasdeshmukh

    Pune,  India

    TECHNICAL PROFICIENCY =============================== Automation Tools dSPACE DS1104 Microcontrollers, Control Desk, PLC Systems Modelling Tools PROE, CATIA, Solid Works Analysis Tools FEA Analysis Tools: ANSYS, HyperWorks, ABACUS Math Tools MATLAB, Simulink ACHIEVEMENTS ================== Young Scientist, Fast Track Research Project, Department of Science & Technology, Govt of India, “Sensorless XY Flexural Mechanism for Precision Application”, 2010. Best Research Project, Vaigyaniki, Radiance, IIT, Bombay for “Design and Development of 3D Microfabrication System”, 2008. International Award at Banglore Nano Conference, “A Novel Optomechatronic Focused Laser Spot Submicron Scanning System for Microstereolithography”, 6-7 Dec, 2007. Appreciated by Director, IIT Bombay, for “Development of Laser Scanner for 3D Micro-fabrication”, 31st Dec 2007. PROFESSIONAL EXPERIENCE ============================ Professor and Head R&D (July 2010 – till date) Sinhgad Academy of Engineering, Kondhawa, Pune Conceptualization, planning and execution of research and development activities at department and institute level Collaboration with various institutes as well as with industry to initiate research activity, develop a research proposals, develop a execution plan and deliver the results on time Train and students and develop their attitude towards R&D Current and Past Projects Sensorless XY Flexural Mechanism for Precision Application, Funded under Fast Track Young Scientist Scheme, Department of Science and Technology, Govt. India. Funding amount is 15 Lakhs and duration is 2 years. Design and development of precision XY Flexural Mechanism for precision application, Demonstration of sensor-less operation of flexural mechanism for accuracy less than 1 μm at high speed of operation i.e. upto 5 mm/s Development of Low Power Consumption Sensor-less Linear Compressor., Funded by ISRO-UoP Cell, University of Pune. Funding amount is 14 lakhs and duration is 2 years. Design and development of linear compressor for refrigeration system Demonstration of linear compressor for its sensor less operation and optimization of system parameters for low power consumption. Development of control and automation system for linear compressor to achieve a best optimum performance Development of Precision XY Flexural Mechanism using compliant amplifier, Funded by BCUD, University of Pune. Funding amount is 5 lakhs and duration is 2 years. Design and development of precision motion stage using compliant amplifier Theoretical and experimental optimization of system level parameters to achieve maximum motion amplification upto 10-15. Experimental demonstration of operation of XY stage for precision position via due control and identification experiments. Design and development of vibration energy extraction system for wireless sensor network, Funded by BCUD, University of Pune. Funding amount is 2 lakhs and duration is 2 years. Design and development of energy harvesting system from machine and ambient vibrations and optimization of system for maximum power generation System integration and experimental demonstration via due experimentations. Professor (Jan 2010 – July 2010) Vishwakarma Institute of Information Technology, Kondhawa, Pune Taught subjects such as Theory of Machines and Dynamics of Machinery. Assistant Professor Head R&D (Nov-2008-Dec 2009) Design and develop a research plan for institute Collaboration with industry to bridge the gap between academy and industry. Projects Handled Development of Wave Power Conversion Pilot Power Station (ANNESH: - Adaptable Near Shore Energy Extraction & Supply Hydrokineter) to Generate 5MW Electricity Investigators: Suhas Deshmukh, Prof. S.G. Kanitkar, Prof. J.G. Kori, and Mr. Milind Dixit Funding Agency: Rajiv Gandhi Technology Commission, Govt. of Maharastra & Maharastra Energy Development Agency Funding Amount: Rs. 50 Lakhs approximately (approved and waiting for fund release) Duration: 3 years (on-going) Goals / Objectives Optimization of design parameters of ANNESH device to achieve maximum efficiency of conversion (more than 90 %) Development of power conversion units based on optimized parameters Total Power generation capacity 5 MW Major Contributions Prototype is designed, developed and tested which convert energy of sea waves into electricity. Initial testing shows that prototype generates 4kW energy. Survey of high wave energy spot is carried out and our pilot power station is to be developed near Gohagar, Ratnagiri, Maharastra. Research Scholar (Jan 2004 – Nov 2008) IIT Bombay Responsibilities Development of research environment Installation, testing of equipments such as micro-map, laser systems (Ar+ and Excimer), Clean Room Facility Research work related to PhD PhD title: Design and Development of Microstereolithography system for 3D Micro-fabrication Conceptualization of optomechanical focused laser spot scanner for Microstereolithography: Conceptualized 3D laser scanner which maintains uniform / fixed spot characteristics (spot size and intensity profile) over entire scan range of the mechanism. Developed 3D has numerous applications such as Microstereolithography, optical scanning tweezers, Near Field Optical Scanning Microscopy, Micro/Macro Laser cutting etc. Design, analysis and development of micro-positioning XY flexural mechanism: Linear scanning of Mirrors and lenses is carred out achieve exact focused spot scanning by using XY Flexural mechanism. Developed XY flexural mechanism is integrated with PC using dSPACE microcontroller. Experimental system identification is carried out and PID control system is implemented in real time. Scanning accuracy of less than 0.65 micrometers is achieved at speed of 2mm/s. This mechanism is further used as a focused laser spot scanning in Micro-stereo-lithography for 3D micro-fabrication. Fabrication, characterization of 3D microstructures: Resolution of microstructures achieved in Micro-stereo-lithography system mainly depends on power of the laser beam and speed of scanning, hence line scanning experiments are carried to experimentally investigate the photo-polymerization process. From experimental investigation process, best process parameters are predicted which gives 6 μm width cured line. Investigated parameters are further used for fabrication of microstructures. Micro-pyramid, micro-cone, micro-gear, micro-turbine, etc structures of fabricated with a dimensioning tolerances of less than 5 μm. Lecturer (June 2000-Dec 2004) Lokmanya Tilak College of Engineering, Koparkhairane, Navi Mumbai Taught subjects such as Design Engineering, Theory of Machines and Dynamics of Machinery. Research Experience (June 1999-March 2000) Bhabha Atomic Research Centre, (BARC), Trombay, Mumbai M.E. (Design Engineering) Dissertation Title:-“Feasibility study of application of ANN to on-line fatigue monitoring system” Work was carried out at Reactor Safety Division, Hall 7, BARC, Trombay Mumbai. Determination of fatigue usage factor for Nuclear Plant components is carried out using Finite Element Method. A back-propagation neural network (BPNN) algorithm was coded in FORTRAN and was trained with random loading conditions (Pressure variation and temperature variation) to determine maximum stress intensity at critical location of components such as Nozzle and Cylinder. Random loading conditions are selected such that most of the plant transients are taken into care and trained BPNN was used to predict fatigue life (i.e. Fatigue Usage Factor). The performance of the BPNN model was evaluated by comparing outputs of the ANN with results of the conventional FEM method. It is observed the close matching of results (results include stress cycle due to loading condition at critical location of component) of BPNN with FEM analysis. PUBLICATIONS ================ PATENTS Suhas Deshmukh, P.S. Gandhi, Kundu, Tapanendu, “A method and a scanner for three dimensional focused laser beam spot”, Patent Office Journal 22/01/2010. Suhas Deshmukh, “Vibration Energy Harvesting Apparatus using Flexural Mechanism and Motion Amplifiers”, Applied for Patent, 2012. JOURNALS Suhas Deshmukh, P.S. Gandhi, “Optomechanical Scanning Systems for Microstereolithography (MSL): Analysis and Experimental Verification”, Journal of Material Processing Technology Volume 209, Issue 3, 1 February 2009, Pages 1275-1285. Suhas Deshmukh, P.S. Gandhi, “New 2D Optomechanical Focused Laser Spot Scanner for Microstereolithography: Analysis and Experimental Results”, Journal of Micromechanics and Microengineering Volume 209, 2010. Suhas Deshmukh, S. Sollapur, “FE Analysis of Flexural Bearing for Linear Compressor”, International Journal of Applied Research in Mechanical Engineering Vol 1, Issue 1 ISSN No 2231-5950, 2011. Suhas P. Deshmukh, P. S. Gandhi, “Microstereolithograpy System: Design, Analysis, and Development”, Journal of Microelectromechanical Systems. (Accepted for Publications). CONFERENCES Suhas Deshmukh, S. Dubey, P.S. Gandhi, “Optical Analysis of Scanning Microstereolithography systems”, Proceedings of the SPIE Symposium on MOEMSMEMS Micro & Nanofabrication, San Jose, CA USA, January 2006. Suhas Deshmukh, Amit Phatak, P.S. Gandhi, “Development of Microstereolithography System for Microfabrication”, dSPACE user conference 2007, International conference on control solution, Banglore, India. Suhas Deshmukh, P.S. Gandhi, ”A Novel Optomechatronic Focused Laser Spot Submicron Scanning System for Microstereolithography," Poster presentation at Banglore Nano conference 2007, International Conference on Nanotechnology, 6-7 December 2007, Banglore, INDIA Suhas Deshmukh, Rahul Ramtekkar, “Design and Development of Ultra precision Microstereolithography System for 3D microfabrication”, Vaigyaniki, Radiance 2008, Mechanical Engg Department, IIT Bombay. Suhas Deshmukh, P.S. Gandhi, Kiran Bhole, “Indegeneously Developed Microstereolithography System: Design, Analysis and Development," Poster presentation at Banglore Nano conference 2008, International Conference on Nanotechnology, 10-13 December 2008, Banglore, INDIA. P.S. Gandhi, Suhas Deshmukh, “Indigenous Microstereolithograpy System: Design, Analysis, and Development”, International Conference on MEMS, 2009, IIT Madras, India. Suhas Deshmukh, S. G. Kanitkar, J.G. Kori, S. N. Teli, “Wave Energy Generation Device: Design, Development, and Implementation”, International Congress On Renewable Energy Renewables: Helping Rural Development ICORE 2009, 6th - 7th October, 2009, New Delhi (India)". Suhas Deshmukh, Abhijeet Deshpande, P.J. Awsare, “Statistical Modeling of GTAW for Weld Strength and Hardness in Welding Zone w. r. t. 304 Stainless Steel”, International Conference on Computational Methods in Manufacturing Engineering, IIT Guwahati, 15-16 Dec 2011. Suhas Deshmukh, Surabh Malpani, “FE Analysis of Flexural Bearing for Linear Compressor”, International Conference on Advanced Research in Mechanical Engineering, Bhubanaeshwar, NIT, 20th may 2011 ACADEMIC DETAILS ===================== Education University/Institute Duration CPI/% Energy Auditor National Certification Exam, BEE, Govt. India ------------ Passed Doctorate Indian Institute of Technology, Bombay, India Area: Design Engineering : 2004-2009 Completed Oct 2009 Masters of Engineering Shivaji University Kolhapur Specialization : Design Engg 1998-2000 74. 17 Bachelors of Engineering Shivaji University Kolhapur Specilization: Mechanical Engg., 1994-1998 69.85 Intermediate / +2 Sangameshwar College Solapur Pune Board 1992-1994 74.17

    Engineering, Matlab & Mathematica, CAD/CAM, and Mechanical Engineering

  • ashvinisingh Profile Picture

    ashvinisingh

    Gurgaon,  India

    CAD Services: · Reverse Engineering · 2D to 3D Conversion · Solid Modeling · Surface Modeling · Sheetmetal Modeling · Assembly · Drafting/ Detailing · Plan Drawing preparation · CAD Data Translation · CAD Data Repair · Product Feasibility Study · Architectural Walkthrough Concept Design: · Concept illustration through Sketching/ Rendering · Product Design – Usability-driven feature addition · Product Styling – Aesthetic feature addition Tool Design: · Injection Mould Design · Die Casting Tool Design · Jig/ Fixture Design · Gauge Design Special Purpose Machine (SPM) Design

    Engineering, CAD/CAM, Mechanical Engineering, and Product Design

  • mindtreesh Profile Picture

    mindtreesh

    A`Nagar,Maharashtra,  India

    I am a mechanical engineer with acute passion for design,development,problem solving and innovative work. My hunger for creative and intellectual work has compelled me to write to you even though i am running a successful business of manufacturing PTFE/Teflon parts.I am ready to do any kind of work for your organisation even as part time or project to project basis. Sangram Holkar Ht-5`6`` Wt-70 kg Age-40yrs Qualification- B.E[Mech] Dip in Mech Engg Personality-Youthful and smart and pleasant person.Fluent in English,Marathi & Hindi SKILL SET- Doing product design and problem solving work in engineering industries since last 15 yrs as a hobby. High IQ.Expert in fluropolymers and engineering plastics. Deep knowledge of manufacturing processes. 4 inventions to my credit.One in materials,two in process and one in machining. Fluent in AUTO CAD. Creative skills and an aesthetic eye Lastly may I add that i am confident about any challenge you can throw.

    Copywriting, Data Processing, Engineering, and Industrial Design

  • raajmath Profile Picture

    raajmath

    asdfasdf,  India

  • ea00000 Profile Picture
  • sachinathani Profile Picture

    sachinathani

    Hubli,  India

    Founded in 2006, Scorpio Design is a multidisciplinary strategy, innovation and design firm headquartered in Bangalore, India. Our multidisciplinary process reveals valuable consumer and market insights and inspires lasting, humanizing solutions. We deliver results through our proprietary methodology, Scorpio E2E® Process. With a team of 3 individuals with vast experience in industrial design, product design, part design, tool / mould design and manufacturing, we deliver fully convergent experiences that span multiple technologies, platforms and media. We can manage part of the work internally and part collaborating with highly specialized professionals, technologists, strategists and analysts. We work with a vast domain of industries, including Consumer Products, Consumer Electronics, Media & Entertainment Products, Medical Products, Retail & Environmental Products, Communication Products, Computer Products, Concept & Research and Brand Identity helping them create and bring to market meaningful products, services and experiences. We offer our clients a wide range of services, from industrial design to part design and prototype to tool / mold design. Profile Type: Individual Year Founded: 2006 Number of Employees: 3 CORPORATE PROFILE It gives us immense pleasure in introducing Scorpio Design and its philosophy, products and capabilities to your esteemed organization. We at Scorpio Design believe in what Carl Rogers said, "If we value independence, if we are disturbed by the growing conformity of Knowledge, of Values, of Attitudes, which our present system induces, then we may wish to set up condition of learning which make for uniqueness for self direction and for self initiated learning". Our Core Competencies: Industrial Design Product Design Part Detail Design Engineering Project Center: We provide value added services in executing high-end Engineering projects for leading MNC's at our state of art design center. We have already been associated with few Automotive and Consumer Product MNCs to support them in executing their high end Industrial Design, Product Design and Part Detail Design. We also provide consultation for solving critical project problems. We undertake design projects in 3D Max, Alias Studiotools, Rhinoceros, Pro-E, Auto-CAD, Photoshop, Coredraw etc. We believe in long term commitment with our esteemed clients, which will enable us to fulfilling all the resource requirements at any given point of time. Our esteemed Client list includes, Altair Engineering Arvin Meritor Atria Power Corporation Betterlife (UAE) Designtech Systems Pvt. Ltd. Fisher & Paykel, New Zealand Net Solutions Inc. USA QuEST Rima Transformers and Conductors (P) LTD (The Delta Group) Snecma Aerospace India TATA Technologies Ltd. TCS Vistara Infotech And many more to add on. Sachin Athani Scorpio Design Vijaynagar, Bangalore, India

    Industrial Design, 3D Rendering, Mechanical Engineering, and Concept Design

  • amrseddik Profile Picture
  • grajakumar29 Profile Picture