In Progress

3D laser scanner Development

The project is a 3D laser scanner similar to the Makerbot Digitizer

[url removed, login to view]

there should be a software to control the scanner and to read the scanner feed and build the 3D CAD model in real time like shown in this video: [url removed, login to view]

We are in need of someone to make a 3D laser scanner similar to the Makerbot Digitizer: http://www.youtube.com/watch?v=AYq5n7jwe40

There should be a software to control the scanner and to read the scanner feed and build the 3D CAD model in real time like shown in this video: http://www.youtube.com/watch?v=xfhVWkbGdV0

Requirements:
1. A 360 degrees rotating table where the object to be scanned is placed.
2. A stepper motor for table rotation.
3. Steps per rotation not less than 500 per rotation.
4. Maximum scannable volume is 50x50x60cm.
5. Use of Arduino UNO or Arduino Mega2560.
6. Use of 2 eye-safe Class 1 laser line generators (Red or Blue).
7. Detail resolution not less than 0.5 mm.
8. Scan speed not more than 10 minutes.
9. Camera with minimum 2 mega pixel CMOS image sensor for capturing photo or video of the object.
10. Windows control software for gathering camera feed, processing and generating 3D CAD. object in real time.
11. USB for sending camera feed to the control software.
12. The output 3D CAD file should be in STL formal.
13. The windows control software should be user friendly with a simple and attractive GUI.
14. The whole project and it's concept, design, plans, drawings, software codes, firmware, should be open source.

THIS IS FINAL UPDATE. PLEASE REFER TO BELOW UPDATE AND ATTACHED FILE WHICH INCLUDES MORE IMPORTANT DETAILS.
We are in need of someone to make a 3D laser scanner similar to the Makerbot Digitizer: http://www.youtube.com/watch?v=AYq5n7jwe40

There should be a software to control the scanner and to read the scanner feed and build the 3D CAD model in real time like shown in this video: http://www.youtube.com/watch?v=xfhVWkbGdV0

Requirements:
1. A 360 degrees rotating table where the object to be scanned is placed.
2. A stepper motor for table rotation.
3. Steps per rotation not less than 600 per rotation.
4. Maximum scannable volume is 50x50x60cm.
5. Use of Arduino UNO or Arduino Mega2560.
6. Use of 2 eye-safe Class 1 laser line generators (Red or Blue).
7. Detail resolution not less than 0.5 mm.
8. Scan speed not more than 10 minutes.
9. Camera with minimum 2 mega pixel CMOS image sensor for capturing photo or video of the object.
10. Windows control software for gathering camera feed, processing and generating 3D CAD. object in real time.
11. USB for sending camera feed to the control software.
12. The output 3D CAD file should be in STL formal.
13. The windows control software should be user friendly with a simple and attractive GUI.
14. The whole project and its concept, design, plans, drawings, software codes, firmware, will be property of the employer.
15. The freelancer must provide full detailed user manual includes all details including maintenance and trouble shooting.
16. The freelancer must provide physical proto-type and full manufacturing details and process includes hardware, software and any related accessories or items to enable the employer to develop, build, and manufacture this project by himself easily.
17. All discoveries, concepts, ideas, inventions, improvements, derivatives, extensions, original works of authorship, processes, machines, equipment, combinations, computer programs, software, source code, databases, drawings, trademarks, designs, and trade secrets, whether or not protectable under the patent, copyright, and/or trade secret laws, and all related know-how that are made, developed, conceived, first reduced to practice or created by the hired freelancer during the course of performance of hired freelancer’s obligations under this Agreement and where Emirates specifically and exclusively pays the total amount of hired freelancer Non-Recurring Engineering Costs (collectively referred to herein as "Intellectual Property") shall belong exclusively to Emirates. hired freelancer acknowledges that all Intellectual Property is work made for hire, including any copyrights, patents, or other intellectual property rights pertaining thereto.

**THIS IS LATEST AND FINAL UPDATE**
**KINDLY IGNORE ALL PREVIOUS DESCRPTIONS. ALSO IGNORE (Desktop_3D_Scanner_Details.pdf)
FILE**
** KINDLY REFER TO BELOW UPDATE AND ATTACHED NEW FILE (Latest Desktop 3D Scanner Spec's.pdf)**
**THE BELOW INTRODUCTIONS/REQUIREMENTS AND ATTACHED FILE (Latest Desktop 3D Scanner Spec's.pdf) ARE PARTS FROM THE CONTRACT BETWEEN EMPLOYER AND FREELANCER**
This project is to build/manufacture and develop Desktop 3D Scanner and software scans a real world object and produce a ready-to-print 3D model quickly similar to the Makerbot Digitizer: http://www.youtube.com/watch?v=AYq5n7jwe40
The developed software must control the scanner and to read the scanner feed and build the 3D CAD model in real time like shown in this video:
http://www.youtube.com/watch?v=xfhVWkbGdV0
Requirements:
1. A 360 degrees rotating table where the object to be scanned is placed.
2. A stepper motor for table rotation.
3. Steps per rotation not less than 600 per rotation.
4. Maximum scannable volume is 50x50x60cm.
5. Use of Arduino UNO or Arduino Mega2560.
6. Use of 2 eye-safe Class 1 laser line generators (Red or Blue).
7. Detail resolution not less than 0.5 mm.
8. Scan speed not more than 10 minutes.
9. Camera with minimum 2 mega pixel CMOS image sensor for capturing photo or video of the object.
10. Windows control software for gathering camera feed, processing and generating 3D CAD. object in real time.
11. USB for sending camera feed to the control software.
12. The output 3D CAD file should be in STL formal.
13. The windows control software should be user friendly with a simple and attractive GUI.
14. The whole project and its concept, design, plans, drawings, software codes, source code, firmware, will be property of the employer.

15. The freelancer must provide and submit working proto-type of the 3D Laser scanner device/equipment with the developed software (including concept, design, plans, drawings, software codes, source code, firmware, related items, related accessories, and anything hardware or software related to the project) to the employer by the end of the project, to enable the employer to build/manufacture the scanner and software by himself independently.

16. The scanner and software meet the agreed standard on this file and introduction on the freelancer website.

17. The freelancer must provide full detailed user manual includes all details including maintenance and trouble shooting.

18. The freelancer must provide physical proto-type and full manufacturing details and process includes hardware, software and any related accessories or items to enable the employer to develop, build, and manufacture this project by himself easily.

19. All discoveries, concepts, ideas, inventions, improvements, derivatives, extensions, original works of authorship, processes, machines, equipment, combinations, computer programs, software, source code, databases, drawings, trademarks, designs, and trade secrets, whether or not protectable under the patent, copyright, and/or trade secret laws, and all related know-how that are made, developed, conceived, first reduced to practice or created by the hired freelancer during the course of performance of hired freelancer’s obligations under this Agreement and where Employer specifically and exclusively pays the total amount of hired freelancer Non-Recurring Engineering Costs (collectively referred to herein as "Intellectual Property") shall belong exclusively to Employer. The hired freelancer acknowledges that all Intellectual Property is work made for hire, including any copyrights, patents, or other intellectual property rights pertaining thereto.

Skills: CAD/CAM, Engineering, Microsoft, Product Design, Windows Desktop

See more: watch 3d model, video to 3d model, software cad 3d, scanner 3d cad, model 3d cad, cad 3d software, architecture 3d model, 3d model watch, 3d model real time, 3d model architecture, 3d cad software, 3d cad model, 3d cad architecture, software 3d, scanner, laser, digitizer, cad model, Cad architecture, makerbot model, model makerbot, laser cut screens cad, software scanner, makerbot, scanner software

About the Employer:
( 0 reviews ) Sharjah, United Arab Emirates

Project ID: #5397489

Awarded to:

ijustcode

Hi, I can do this and can explain you in bit more how i would do this if you choose me for this task to complete with great completion on budget and time.I am an Expert Developer and having 8+years of Experience wit More

$1288 USD in 25 days
(2 Reviews)
0.0

7 freelancers are bidding on average $1271 for this job

Jas3d

i have 9 year experience. i can do any kind of 3d graphics works. i have attached some of my best works in my profile kindly check it .if my work satisfy your needs then pay me and i am sure it will you can check my ra More

$1184 USD in 20 days
(7 Reviews)
4.6
elancekumar

Hi, I see the videos of digitizer and you want similar kind of video done in 3d. It can be managed, we need also some 3d models for digitizer. these models can be downloaded from 3d model sites For digitizir More

$833 USD in 20 days
(2 Reviews)
3.4
Denya3d

Hi. You can see examples of my works here: [url removed, login to view] If your have any question - feel free to contact with me. In a case of your interest, waiting for your answer with more detail information. More

$1473 USD in 20 days
(1 Review)
1.2
futurenext1009

Dear client we have understood your requirement of developing 3D laser scanner by referring to the mentioned [url removed, login to view] have quality team who have 4 years of work experience in the field of PHP,3D design and software d More

$1159 USD in 20 days
(0 Reviews)
3.1
krishcompusoft11

Hi this is Deval from “KCSPL – IT Software Consulting Company". As glad to share further information about our Technological Capabilities, kindly have a look on our Website: [url removed, login to view] You can also v More

$1649 USD in 14 days
(0 Reviews)
0.0
allenav

Hello, I'm Senior Software developer and designer. I've over 7 years of experience in analysis, design and development of various websites & web applications.I've worked extensively in PHP, MySQL, Joomla, Wordpre More

$1311 USD in 25 days
(0 Reviews)
0.0