Plastic Injection Molded Casing Design for new Product - repost

Budget $250 - $750 USD
Bids 10
Average Bid $517

We are working on a new technical product line and require some work done on designing plastic casing parts. This plastic casing design will need to be sent to a plastic injection mold manufacturer to be able to create the plastic injection mold designs.

Throughout the design process it must be kept in mind, the cost and complexity of the plastic injection moulding process. It is not necessary to design the actual plastic injection mold though. Only the 3D design of the actual parts must be created with all necessary documents to pass on to the mold manufacturer.

The overall project is to be separated into 3 sub projects and each sub project will have two sections. This is because there are a total of 6 parts that must be designed and the two parts make up a casing. Therefore there are 3 pairs of casing parts and each pair will have a separate project. We would like one individual to take on all four projects but depending on time scale we may except more than one person to speed up the process.

To give a basic idea of the parts;

Sub Project One (This project)****************
There are two separate parts that must be designed in this project. They are similar but not the same. The two parts go together to make one complete shell. This shell is to be connected onto an L shaped metal plate via screws through the sides. Inside the casing will be motors, pulleys, belts and electronics. The design will have mounting pillars for a PCB and pillars on both parts to allow them to be screwed together. One major factor in this project is cost (more so than in other projects). Cost consideration must taken into account at all times during the project and any potential savings in cost through design will need to be communicated to us.

I have done a very quick model of the parts in sketch up for your reference but we will provide much more detailed specs when the project is underway. Please find the model in sketch up format below.
[url removed, login to view]

The other 3 projects are similar to Project One but require different part designs.

Basic Part design for Project Two...
[url removed, login to view]

Basic Part design for Project Three...
[url removed, login to view]

Please note that the 3d files provided above are just to give you an idea of the scale and basic shape of the parts. Full details will be provided on request within reason and the rest will be provided once the project is underway.

We also may accept hourly offers, but only if an accurate estimate on the time the project will take is provided.

Please note that you are only bidding on Project One. Project Two and Project Three are also available.

Post a Project Like This

Looking to make some money?

  • Set your budget and the time frame
  • Outline your proposal
  • Get paid for your work

Bids on this Project

  • mmoliani Profile Picture

    mmoliani

    mornago,  Italy

    - Marco is specialised in PLASTIC INJECTION MOULDING. - Marco is an industrial designer with experience in plastic mold design and moulding of plastic parts. - Marco has also 3d modeling skills and experience in product development. He has extensive knowledge of plastics and its properties. - Marco has the chance to work with selected Asian suppliers while maintaining an excellent quality product with very competitive costs.

    Industrial Design, Product Sourcing, CAD/CAM, and Manufacturing

  • slmold03 Profile Picture

    slmold03

    shenzhen,  China

    I am a good partener

    Graphic Design, Internet Marketing, Project Management, and Research

  • samuraidave Profile Picture

    samuraidave

    Auburn,  United States

    I am a creative person with a engineers brain. The construction industry keeps my craftsman skills sharp. I welcome freelance work that interests me and gets my creative juices going. Resume: http://www.linkedin.com/profile/view?id=175325779&trk=tab_pro Portfolio: http://www.wix.com/samuraidave-1/samuraidavecom

    Photoshop, Industrial Design, CAD/CAM, and Building Architecture

  • jonnypjohnston Profile Picture

    jonnypjohnston

    Tulsa,  United States

    Mobile: (260) 440-1212 Email: Portfolio: https://grabcad.com/jp.johnston-1 LinkedIn: https://www.linkedin.com/in/jpparametrics Twitter: https://twitter.com/JonnyPJohnston ​Facebook: https://www.facebook.com/JPParametics​ I have current licenses for SolidWorks Premium 2014/2015, COMSOL Multiphysics, CATIA v5r21, Inventor Professional 2014/2015, AutoCAD Mechanical 2014/2015, AutoCAD Electrical 2014/2015. Paintball markers for recreation and less lethal markets; model train track layout; R/C airplanes, helicopters, quadcopters, hexacopters, MAV's, UAV's & after-market parts; ultralight aircraft; fuselage & wing assembly jigs & fixtures; long bow, crossbow concept design; injection molds, LSR transfer injection molds; composite tooling, jigs & fixtures; assembly jigs & fixtures; drill jig fixtures; robot cell layouts; go/no-go & final form gages; form, piercing, & trim dies; high speed flat tube cutoff machinery; flat tube end-form tooling; CNC tube-bending machinery; vibratory feeder bowls; robot pick-n-place systems; hard-facing & powder coating machinery; wire drawing & winding machinery; motor wire-winding & assembly machinery; index tables; sheet metal design; pneumatic control systems; fluid flow, stress, & thermal analysis; tolerance stack-up & analysis; quote projects from concept to customer; BOM’s; parts & materials purchasing; coordinate designing & machining to maximize efficiency; ASMI Y14.5M Geometric Tolerancing, QS 9001, TS 16949, APQP, & PPAP.

    Visual Basic, Matlab & Mathematica, CAD/CAM, and 3D Rendering

  • johanpreez Profile Picture

    johanpreez

    Pretoria,  South Africa

    Been a design engineer for more than 10 years specializing in rf electronics and system design, currently in the manufacturing and production field

    Engineering, Industrial Design, CAD/CAM, and Manufacturing

  • aerproductdesign Profile Picture

    aerproductdesign

    Shenzhen,  China

    Work with Fortune Companies ( e.g A & AMZ ) Love to develop High-end product? then let's start to rock&roll!.

    Engineering, Industrial Design, CAD/CAM, and Manufacturing

  • Lesorton Profile Picture

    Lesorton

    Algorfa,  Spain

    30 year Experience in plastic injection mould tools, both tools & and product design. Engineering apprenticeship. I have been using Cad since 1990, Solidworks for 12 years.

    Graphic Design, Engineering, Industrial Design, and CAD/CAM

  • AlanNadjarian Profile Picture

    AlanNadjarian

    Dublin,  Brazil

    I´m graduate in mechatronics engineering and industrial automation. Working as designer with 3D CAD softwares. More than 5 years of experience with SolidWorks, AutoCAD and Catia V5.

    Engineering, CAD/CAM, 3D Rendering, and Solidworks

  • FCasimiro Profile Picture

    FCasimiro

    Raposa,  Portugal

    Electromechanical Engineer, with strong technical skills and development capacities in different engineering fields. 9 years’ experience in 3D modeling with SolidWorks and also for 2D technical drawings, simulation and motion analysis. Engineering conception and R&D of new products and technologies with great knowledge of industrial processes and manufacturing. More info: www.filipecasimiro.com

    Engineering, CAD/CAM, Solidworks, and Mechanical Engineering

  • mikebudd Profile Picture

    mikebudd

    Ellensburg,  United States

    I am a mechanical/electrical design engineer with over 20 years of experience. I have an associates in Computer Aided Design and a Bachelors of Science in Mechanical Engineering from Washington State University. I have 17+ years of experience designing and engineering various pieces of machinery in the mechanical engineering field and working on various electronics and electrical projects with some civil engineering thrown in. My experience is very broad due to the fact that until recently I have been working full time and freelancing on the side. Currently I am a full time freelancer and can devote all the time necessary to your project. I am fully versed and have over 10 years of experience with Solid works and Autodesk Inventor both of which I have full current copies of, and over 20 years of experience with AutoCAD. I also have experience writing LISP, VB.net and VBA programs for Solidworks and AutoCAD applications.

    Engineering, Electronics, Industrial Design, and CAD/CAM