The project is to write an embedded software including a web server based on the Freertos and the uIP stack on a NXP LPC2468 based board, the board is a customized board that include a 256 MB SDRAM (ISSI IS42S16160D), 4 GB NAND Flash(Micron MT29F4G08ABADAWP), 8K EEPROM (M24C08) and the IP113S.
the board has two I2C connected and the UART port.
the request is to have the following installed:
- UART boot menu and firmware update.
the board has a Jtag connector, this will be connected to the Jlink pro debugger from Segger and connected to a computer where IAR Embedded workbench IDE (V 6.10) is installed, you will have an access to our system for debug and tests.
Some source code is already available (driver for the IP113S), but not tested.
other information could be delivered uppon request after signature of the NDA.
The webserver should include some common controls such as: username /password authentication, IP address management, GPIO control, System status, Firmware update, load default settings, reset function and backup/restore.
The system should also implement a telnet server, SSH server, SNMP and a dhcp client.
the delivery should be a comprehensive and well documented source code, and a working version on the board.
Also a brief user manual that include all written or edited functions (by the freelancer): name of the functions, input variables, outputs and brief description of the functions.
7 freelancers are bidding on average $1043 for this job
HI, I know the lpc24xx series by NXP, I know IAR (I am using it now for a project with msp430) and I know FreeRTOS and uIP. I HAVE NO PROBLEM AT ALL TO DO THIS FOR YOU 100% SURE. thank you maurizio stefani